MPC8536ECVTAQGA - PowerPC e500 MPU 1GHz 783-FCPBGA | NXP
Артикул: MPC8536ECVTAQGA ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $256.5 | $2.565,00 |
| 100 | $228 | $22.800,00 |
| 500 | $199.5 | $99.750,00 |
| 1.000 | $171 | $171.000,00 |
MPC8536ECVTAQGA Обзор
What is a PowerQUICC III SoC? The PowerQUICC (pronounced "power-quic") family is a line of system-on-chip processors originally developed by Motorola (later Freescale, now NXP). They integrate a PowerPC processing core with communications peripherals on a single die. The MPC8536E belongs to the PowerQUICC III generation, which scales the e500 core to gigahertz-class frequencies and adds advanced connectivity for IP networking and embedded applications. A microprocessor (MPU) like the MPC8536E combines the CPU core, memory controller, and I/O peripherals in one IC, distinguishing it from a microcontroller (MCU) that integrates flash and SRAM on-chip.
Key features include 1.0 GHz e500 core frequency, 36-bit physical address extension, integrated security engine, dual GbE MACs, multi-protocol support for networking, and simultaneous high-throughput I/O. The extended -40C to +105C temperature grade supports industrial and networking equipment.
The device uses a high-performance superscalar e500 core with integrated L1 cache (32 KB instruction, 32 KB data) and supports up to 256 KB L2 cache. The 783-pin FCBGA package with 1 mm pitch provides the I/O density needed for the parallel DDR memory bus and multiple serial interfaces. The SoC integrates a DMA engine, interrupt controller, and boot ROM interface.
Typical applications include industrial networking routers and switches, secure communications gateways, networked storage controllers, factory automation PLCs, and IP-based wireless infrastructure. The integrated security engine accelerates IPSec and SSL/TLS operations while the GbE ports serve as line-rate network interfaces without external MAC chips.
Designers should plan PCB layout with matched-impedance routing for DDR2/DDR3 memory, controlled-impedance SerDes lanes for SATA/PCIe, and adequate decoupling near the FCBGA power rails. Heat dissipation at 1 GHz requires thermal vias under the package and consideration of airflow in enclosed enclosures.
This page synthesizes distributor pricing, drop-in alternatives within the MPC85xx family, and practical design notes not aggregated in the NXP datasheet.
Аналоги без доработки для MPC8536ECVTAQGA — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MPC8536ECVTAQGA (тот же форм-фактор и посадочное место) — отличается по Ethernet, Mounting Type, Operating Temperature, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MPC8536ECVTAQLA
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MPC8536ECVTARGA
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MPC8536EECVTAQGA
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MPC8536ECVJANG
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MPC8548ECVJAQGD
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MPC8548EVJAQGD
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MPC8536ECVTAQGA Максимальные параметры и электрические характеристики
| Core Processor | PowerPC e500 |
| Number of Cores | 1 |
| Bus Width | 32-bit |
| Core Frequency | 1.0 GHz |
| Корпус | 783-FCPBGA (29x29 mm, 1 mm pitch) |
| Тип монтажа | Surface Mount (BGA) |
| Co-Processors / DSP | Security; SEC |
| RAM Controllers | DDR2, DDR3 |
| Ethernet | 10/100/1000 Mbps (GbE) |
| Graphics Acceleration | No |
| Рабочая температура | -40C to +105C (Industrial) |
| Напряжение питания | 1.1 V (core) |
| Lead-Free | Yes |
| Series | MPC85xx (PowerQUICC III) |
Руководство по цоколевке MPC8536ECVTAQGA в корпусе 783-fcpbga (29x29 mm, 1 mm pitch)
Цоколевка для MPC8536ECVTAQGA (корпус 783-fcpbga (29x29 mm, 1 mm pitch)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MPC8536ECVTAQGA.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MPC8536ECVTAQGA подходит для 7 применениеs: Industrial Network Router, Secure Communications Gateway, Network-Attached Storage Controller, Factory Automation PLC, IP-Based Wireless Infrastructure, Industrial IoT Edge Gateway, Print / Imaging Controller.
Industrial Network Router
The MPC8536ECVTAQGA fits industrial routers because it pairs an e500 core at 1.0 GHz with hardware-accelerated IPSec via the SEC engine, plus integrated dual GbE MACs and PCIe for expansion. Its DDR2/DDR3 controller sustains routed packet buffers while running iptables or OSPF control-plane on Linux. The industrial -40C to +105C temperature grade supports outdoor DIN-rail and roadside enclosures. Unlike a discrete host CPU plus external crypto ASIC, this single-chip integration reduces BOM cost and PCB area, while delivering line-rate GbE throughput with native IPSec offload - a key advantage in IPsec VPN routers deployed in SCADA and field-site networks.
Рекомендуется
Secure Communications Gateway
The MPC8536ECVTAQGA's hardware security engine (SEC) accelerates AES, 3DES, and public-key algorithms for SSL/TLS termination at the network edge. Designers pair the device with external PHY transceivers over the integrated SerDes lanes and rely on the GbE MACs for encrypted traffic handling. The -40C to +105C rating covers outdoor telecom cabinets, while Linux/OpenSSL support provides familiar development tooling. The SoC's PCIe x4 lanes enable co-processors for additional VPN throughput, with the SEC engine offloading the bulk of crypto operations directly, dramatically reducing host CPU load compared to a software-only approach.
Рекомендуется
Network-Attached Storage Controller
The MPC8536ECVTAQGA drives NAS controllers because its DDR2/DDR3 controller handles streaming workloads, while integrated SATA and PCIe combine to attach multiple HDDs/SSDs without external bridges. The GbE MAC serves as the network-side interface at line rate, with the SEC engine optionally used for encrypted filesystem offload. The e500 core runs NFS/SMB services under Linux with proven file-system maturity. Designers benefit from the integrated peripherals reducing controller-board complexity compared to discrete solutions, and the industrial temperature grade supports NAS appliances in factory-floor and edge-compute cabinets.
Рекомендуется
Factory Automation PLC
In factory automation, the MPC8536ECVTAQGA serves as the control-plane processor for PLCs managing EtherNet/IP, PROFINET, or Modbus TCP fieldbus traffic. Its GbE MACs handle multiple industrial Ethernet channels concurrently, while the -40C to +105C rating tolerates sealed control-cabinet environments. The SEC engine protects proprietary PLC programs from unauthorized access. With deterministic interrupt latency from the e500 core and a robust peripheral set including PCIe and USB for HMI touchscreens, the part replaces older discrete processor + peripheral stacks and enables smaller-form-factor IP67 controllers common in modern smart factories.
Рекомендуется
IP-Based Wireless Infrastructure
The MPC8536ECVTAQGA serves small-cell base stations and Wi-Fi access-point controllers by combining GbE MACs (for backhaul), PCIe (for radio cards), and USB (for management). The SEC engine authenticates subscriber devices and secures OTA configuration. Linux support provides familiar 802.11 management stacks. Designers can attach an external radio module via PCIe or USB while keeping the host CPU free for RF management tasks. The compact 29x29 mm FCBGA footprint eases layout in fanless small-cell housings, and industrial temperature grade supports outdoor pole-mount radios without derating.
Рекомендуется
Industrial IoT Edge Gateway
The MPC8536ECVTAQGA is well-suited to industrial IoT gateways because it aggregates multiple fieldbus protocols (Modbus, CAN, EtherNet/IP over PCIe-attached bridges), processes edge analytics on the e500 core, and publishes to cloud brokers via GbE with optional TLS offload via SEC. The industrial -40C to +105C rating supports DIN-rail mounted edge nodes in plant environments. The DDR3 controller handles real-time telemetry buffers. Compared to a microcontroller-only approach, this MPU offers a full Linux environment with containers and time-series databases at the edge, enabling faster local decisions while reducing WAN bandwidth costs.
Рекомендуется
Print / Imaging Controller
Multi-function printer and production-printer controllers can use the MPC8536ECVTAQGA because its GbE handles network print traffic, USB supports device-side peripherals, and PCIe attaches scanner and finishing modules. The e500 core runs printer firmware with proven Linux support, while the SEC engine secures SNMPv3 and IPsec admin sessions. The DDR3 controller holds spool buffers. Unlike small MCUs, this MPU easily handles PostScript/PDF rasterization at full engine speed, and the FCBGA footprint enables single-board controllers in space-constrained printer chassis. The industrial temperature grade supports office and light-production environments.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MPC8536ECVTAQGA — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MPC8536ECVTAQLA | MPC8536ECVTARGA | MPC8536EECVTAQGA | MPC8536ECVJANG | MPC8548ECVJAQGD | MPC8548EVJAQGD |
|---|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCPBGA (29x29 mm) | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same |
| Core | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 (MPC8548E) | PowerPC e500 (MPC8548E) |
| Core Frequency | 1.0 GHz | ~600 MHz | 1.0 GHz (different temp grade) | 1.0 GHz | ~667-833 MHz | 1.5 GHz | 1.5 GHz |
| Security Engine (SEC) | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| RAM Controller | DDR2/DDR3 | DDR2/DDR3 | DDR2/DDR3 | DDR2/DDR3 | DDR2/DDR3 | DDR2/DDR3 | DDR2/DDR3 |
| Ethernet | Dual GbE | Dual GbE | Dual GbE | Dual GbE | Dual GbE | Dual GbE + more SerDes | Dual GbE + more SerDes |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C (industrial) | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| Lifecycle | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Ключевые отличия
- Wide industrial temperature range and integrated security (против MPC8536 (non-E))
- 1.0 GHz speed grade available (против MPC8536ECVTARGA)
- Drop-in upgrade path to higher-performance MPC8548E (против MPC8536 (original 0.6 GHz version))
Заметки по проектированию
At 1.0 GHz, the MPC8536ECVTAQGA dissipates significant power through its 783-FCBGA package. Estimated: with core supply at 1.1 V and typical core power of 8-12 W (Mobility-dependent), designers must implement a thermal-management strategy. Use thermal vias in the PCB land pattern directly under the BGA, a copper heat spreader on top-side, and consider a heat sink or cold plate for enclosed industrial enclosures. Without these measures, junction temperature may exceed 105C, triggering thermal shutdown.
The 783-FCPBGA with 1 mm ball pitch requires high-density PCB routing and controlled-impedance traces. Use 4 to 6 PCB layers with dedicated power and ground planes. SerDes lanes for SATA and PCIe demand 85-ohm differential impedance with length matching to within 5 mil. DDR2/DDR3 routing requires matched fly-by topology per the JEDEC specification. Use via-in-pad or microvia technology if routing density requires escape from the inner BGA rows.
SERDES interfaces (PCIe, SATA) require AC-coupled capacitor placement near the transmitter with characteristic impedance of 85 ohms differential. Reference clock lines must be routed with controlled impedance and isolated from noisy digital rails. The integrated GbE MACs support RGMII to external PHYs, which has strict trace-length matching requirements between clock and data lines (typically within 50 ps). Poor signal integrity on these interfaces is the most common cause of bring-up failures on first prototypes.
Do not power the device without proper sequencing: 1.1 V core, 1.5 V/1.8 V DDR reference, and 3.3 V I/O must be sequenced per the NXP datasheet (typically core first, then I/O). Bypass with 0.1 uF ceramic capacitors adjacent to each supply pin and bulk tantalum capacitors on each major rail. Ensure reset assertion follows power stabilization, otherwise the SEC engine state may be undefined. Initial prototypes should include external JTAG access for debug.
Place the boot configuration resistors (cfg_rom_lines, SYS_CLK configuration) close to the corresponding pins to avoid noise pickup during reset. Keep high-speed serial traces short and isolated from switching power converters. For multi-board designs, route the I2C and SPI management buses away from the GbE and PCIe lanes to prevent crosstalk. A common pitfall is routing these buses parallel to the GbE RGMII signals; introduce ground-guard traces if routing them in adjacent layers.
Информация о соответствии
RoHS compliance data not surfaced in verified sources; recommend confirmation with NXP product compliance team. Lead-free per the 'LF' parameter in the verified distributor data. Not AEC-Q100 qualified; this is an industrial networking MPU, not an automotive-grade part.
