P2040NSE1MMB - QorIQ P2040 4-Core 1.2GHz PowerPC MPU | NXP
Артикул: P2040NSE1MMB ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $268 | $2.680,00 |
| 100 | $245 | $24.500,00 |
| 500 | $222 | $111.000,00 |
| 1.000 | $199 | $199.000,00 |
P2040NSE1MMB Обзор
A microprocessor (MPU) is a single-chip CPU that integrates one or more processor cores, caches, memory controllers, and a rich set of system I/O on a single die. Within the broader computing hierarchy, an MPU sits between a microcontroller (typically lower-power, integrated peripherals, single-tasking) and a high-end server CPU (multi-socket, out-of-order, NUMA). The QorIQ family belongs to the embedded networking segment, where deterministic performance, low power, and integrated high-speed SerDes are critical.
The P2040NSE1MMB features four e500mc cores with dual-issue pipelines, integrated L1/L2 caches, a 64-bit DDR3/DDR3L memory controller, three PCIe Gen 2 controllers, multiple 10 GbE and 1 GbE Ethernet MACs, SATA, USB, and a flexible SerDes-based I/O fabric. Hardware virtualization and trusted-boot features (per the QorIQ Security Engine) are supported. The integrated datapath accelerators (DPAA) provide packet parsing, queuing, and crypto offload, allowing line-rate processing on multi-gigabit interfaces without burdening the cores.
Typical applications include multi-service routers, LTE/4G base-station baseband, IP-PBX/media gateways, enterprise switches, and industrial control. The software ecosystem supports standard Linux, VxWorks, and Green Hills INTEGRITY, with NXP CodeWarrior and the QorIQ Linux SDK providing toolchain and board-support packages. P2040 software is upward-compatible with the P3, P4, and P5 QorIQ families, enabling customer code reuse across product tiers.
When designing with the P2040NSE1MMB, engineers should plan thermal management for the 23x23 mm BGA; consult the Freescale/NXP Hardware Specification for the recommended 8-layer PCB stack-up, decoupling, and boundary-scan/JTAG access. Pin-compatible variants such as the P2041 (additional features) and frequency-scaled bins (1000 MHz) allow system tuning without re-laying-out the PCB.
This page synthesizes distributor pricing from DigiKey/Mouser/Octopart, parametric drop-in alternatives, and practical hardware-design guidance not found in the bare manufacturer datasheet.
Аналоги без доработки для P2040NSE1MMB — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с P2040NSE1MMB (тот же форм-фактор и посадочное место) — отличается по Memory Controller, Operating Temperature Range, Core Architecture, Maximum Core Frequency, PCI Express.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
P2040NSN1MMB
✅ Прямая замена✓ В наличии
$175 / шт.
Открыть даташит →P2041NSE1MMB
✅ Прямая замена✓ В наличии
$107.71 / шт.
Открыть даташит →P2040NSE1HLB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
P2040NSE1MMB Максимальные параметры и электрические характеристики
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | QorIQ P2 |
| Core Architecture | PowerPC e500mc |
| Number of Cores | 4 |
| Разрядность шины данных | 32-bit |
| Maximum Core Frequency | 1.2 GHz |
| Диапазон рабочих температур | 0 °C to 105 °C (commercial/extended) |
| Корпус | 780-FCPBGA (23 x 23 mm) |
| Число выводов | 780 |
| Тип монтажа | Surface Mount |
| Memory Controller | DDR3 / DDR3L, 64-bit |
| PCI Express | 3 x PCIe Gen 2 controllers |
| Ethernet | Multiple 1 GbE / 10 GbE MACs |
| Other I/O | SATA, USB, DUART, I2C, SPI |
| Silicon Revision | r1.1 |
| Статус RoHS | Compliant |
Руководство по цоколевке P2040NSE1MMB в корпусе 780-fcpbga (23 x 23 mm)
Цоколевка для P2040NSE1MMB (корпус 780-fcpbga (23 x 23 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для P2040NSE1MMB.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
P2040NSE1MMB подходит для 6 применениеs: Enterprise Multiservice Routers, LTE/4G Base Station Baseband Processing, Industrial Control and Rugged Networking, IP-PBX and Unified Communications Gateways, Software-Defined Networking (SDN) Controllers, Test and Measurement Network Analyzers.
Enterprise Multiservice Routers
Enterprise and service-provider edge routers commonly use the P2040NSE1MMB as the main control-plane processor. The four e500mc cores at 1.2 GHz deliver the deterministic performance needed for routing-table computation, BGP/OSPF convergence, and QoS classification, while the integrated DPAA offloads the data-plane packet parsing and queue management. The three PCIe Gen 2 controllers provide high-bandwidth links to line-card ASICs or NPUs, and the DDR3 controller with 64-bit width supports large routing tables without external memory expansion. Designers typically pair the P2040 with a switching fabric and external PHY transceivers; the 1.2 GHz core frequency offers about 20% headroom over the 1.0 GHz P2040NSE1HLB for software-defined networking workloads.
Рекомендуется
LTE/4G Base Station Baseband Processing
The P2040NSE1MMB fits small-cell and macro-cell base-station baseband cards where multi-core PowerPC processing and a rich I/O fabric are required. Its four e500mc cores at 1.2 GHz can handle layer-2 scheduling and L1 control, while the DPAA accelerates ciphering and IPsec. The DDR3 memory controller supports the high-bandwidth buffering needed for HARQ retransmissions and MIMO data paths. The integrated multi-gigabit Ethernet and PCIe links connect directly to RF front-end cards and backhaul. Designers select the P2040 over the P2041 when their layer-1 work is offloaded to a dedicated DSP/ASIC; the four cores are then dedicated to MAC scheduling and OAM processing.
Рекомендуется
Industrial Control and Rugged Networking
For industrial switches, IP-PBX systems, and rugged gateways, the P2040NSE1MMB provides the right mix of compute performance and I/O integration. The four cores run control-plane software stacks (RTP, SIP, firewall) and the on-chip DPAA accelerates wire-speed packet classification. The PCIe and SATA interfaces enable local SSD logging for diagnostics, while the multiple Ethernet MACs connect to copper and fiber PHYs. Although the NSE1 grade is rated 0 to 105 °C, the part can be deployed in temperature-controlled cabinets; for fully outdoor installations designers step up to the NSN1 extended-temperature variant on the same 780-FCPBGA footprint.
Рекомендуется
IP-PBX and Unified Communications Gateways
The P2040NSE1MMB is a strong fit for IP-PBX and media-gateway appliances that mix voice, video, and data traffic. Four cores at 1.2 GHz handle SIP signaling, RTP media relay, and encryption without external accelerators. The integrated security engine accelerates AES and 3DES for SRTP media streams, and the multiple Ethernet MACs connect to LAN and WAN PHYs. The PCIe link supports DSP cards for transcoding. Compared with the P2041, the P2040 offers sufficient queue depth for typical SMB IP-PBX deployments of up to 500 concurrent sessions, with the P2041 reserved for larger enterprise installations.
Рекомендуется
Software-Defined Networking (SDN) Controllers
SDN controllers and OpenFlow data-plane appliances benefit from the P2040NSE1MMB's deterministic performance and DPAA offload. Four cores at 1.2 GHz run the controller agent and protocol stack, while the DPAA processes flow-table matches at wire speed. The PCIe and Ethernet interfaces connect to white-box switch ASICs, allowing the P2040 to act as the local control plane. For high-flow-rate environments where deep packet inspection is required, designers move up to the P2041 within the same PCB footprint. The P2040NSE1MMB is also widely used in Open vSwitch reference designs.
Рекомендуется
Test and Measurement Network Analyzers
High-end network protocol analyzers and traffic generators use the P2040NSE1MMB to timestamp packets, generate load, and process captures in real time. The four cores at 1.2 GHz can sustain multi-gigabit line-rate capture with hardware timestamping via the integrated IEEE 1588 support. The DDR3 controller provides the bandwidth needed to stream captures to external storage over SATA or PCIe. Compared with general-purpose x86 test platforms, the P2040 offers lower power and deterministic latency, which is important for compliance testing. The P2041 upgrade provides additional buffer queues for stress-test scenarios.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для P2040NSE1MMB — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | P2040NSN1MMB | P2041NSE1MMB | P2040NSE1HLB |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 780-FCPBGA (23x23 mm) | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same |
| Core Frequency | 1.2 GHz | 1.2 GHz | 1.2 GHz | 1.0 GHz (-17%) |
| Number of Cores | 4 x PowerPC e500mc | 4 x PowerPC e500mc | 4 x PowerPC e500mc | 4 x PowerPC e500mc |
| Operating Temperature | 0 to 105 °C | -40 to 105 °C (extended) | 0 to 105 °C | 0 to 105 °C |
| Silicon Revision | r1.1 | r1.1 | r1.1 | r1.1 |
| DPAA Engines | Standard set (parse, queue, crypto) | Standard set | Extended (additional queue managers, pattern matching) | Standard set |
| Pin-Compatible | Yes (baseline) | Yes | Yes | Yes |
| Approx. Unit Price (qty 1000) | USD 199 | USD 215 (extended temp premium) | USD 230 (feature upgrade) | USD 175 (lower bin) |
Ключевые отличия
- Pin-compatible temperature-grade upgrade available (против P2040NSN1MMB)
- Direct hardware upgrade path to P2041 (против P2041NSE1MMB)
- Lower-cost speed-grade variant on same footprint (против P2040NSE1HLB)
Заметки по проектированию
The 780-FCPBGA at 23x23 mm requires a 1.0 mm ball pitch, so the PCB must use at least an 8-layer stack-up with micro-vias. Per NXP's QorIQ hardware specification, dedicate solid ground planes beneath the BGA and use the reference decoupling scheme (1 uF + 0.1 uF + 10 nF per supply pin). The SerDes lanes must use 100-ohm differential routing with length-matching to within 0.127 mm. Estimated: total decoupling capacitor count is approximately 60 to 80 per board.
The 780-FCPBGA package has a junction-to-ambient thermal resistance in the range of 12 to 18 C/W depending on PCB stack-up and airflow. Estimated: at typical 12 W core power and 1.2 GHz operation, junction temperature rises about 30 to 45 °C above ambient with 200 LFM airflow. Use a heatsink or thermal pad for sealed enclosures, and ensure the chassis airflow path keeps the case below 85 °C for the 105 °C-rated NSE1 grade.
Power sequencing must follow NXP's POR sequence: VDD_CORE before VDD_DDR, with the DDR reference voltage (DDR_VREF) tracking VDD_DDR/2. Missing the sequence can prevent boot or latch the part into a non-functional state. Also confirm boot configuration (RCW) is loaded from the correct source before reset release - a wrong RCW source is the most common bring-up failure on QorIQ P2 designs. Designers should plan for JTAG header access even on production boards for field debug.
Информация о соответствии
RoHS compliant per NXP product declaration; AEC-Q100 not applicable - this is an MPU, not an automotive-grade IC.
