P2041NXE1MMB - QorIQ P2 4-Core 1.2GHz PowerPC MCU | NXP
Артикул: P2041NXE1MMB ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $289.99 | $289,99 |
| 10 | $275.49 | $2.754,90 |
| 100 | $246.49 | $24.649,00 |
| 500 | $217.49 | $108.745,00 |
| 1.000 | $188.49 | $188.490,00 |
P2041NXE1MMB Обзор
Background: A communications processor is a system-on-chip (SoC) class of microprocessor that combines general-purpose CPU cores, high-speed serial interfaces, packet-processing engines, security accelerators, and memory controllers on a single die. QorIQ P-series parts sit within the broader Power Architecture ecosystem and are software-compatible across P1, P3, P4, and P5 families, enabling code reuse. Multicore communications processors are widely used in routers, switches, base stations, industrial gateways, and military radios where deterministic throughput and packet-latency budgets matter more than raw single-thread speed.
Key features include four e500mc cores at 1.2 GHz with shared L2 cache, three 10/100/1000 Mbps enhanced triple-speed Ethernet controllers, five high-speed serial RapidIO or SerDes lanes, DDR3/DDR3L SDRAM controller with ECC support, integrated security engine (SEC 4.0) for IPsec and SSL, PCI Express Gen 2.0 controllers, and a 32-bit local bus. The 780-FCBGA package exposes extensive SerDes, Ethernet, and memory interfaces while supporting industrial-grade thermal operation from -40C to +105C.
Typical applications include enterprise routers and switches, multi-service access nodes, industrial control-plane processors, LTE small-cell base stations, secure VPN gateways, and military/aerospace communications. Designers choose the P2041 when four cores deliver sufficient throughput but the larger P4040/P4080 power envelope is overkill. The encrypted NXE silicon variant is required for secure boot and tamper-resistant key storage in defense and critical infrastructure deployments.
When designing with this device, allocate adequate PCB area for the 780-ball FCBGA fan-out, follow NXP AN3949 thermal recommendations for the FCBGA heat-spreader attachment, and validate DDR3 signal integrity with IBIS models before tape-out. Confirm long-term supply through NXP's product longevity program, since QorIQ P2 parts have transitioned through several end-of-life announcements.
This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet alone, including verified stock at distributors such as Rochester Electronics and indicative unit pricing as of 2026-10-16.
Аналоги без доработки для P2041NXE1MMB — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с P2041NXE1MMB (тот же форм-фактор и посадочное место) — отличается по Core Architecture, Ethernet, Memory Controller, Package, Security Engine.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
P2041NSE1MMB
✅ Прямая замена✓ В наличии
$107.71 / шт.
Открыть даташит →P2041NXN1MMB
✅ Прямая замена✓ В наличии
$152.75 / шт.
Открыть даташит →P2020NSE1MMB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
P4040NSE1MMB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
P2040NXE1MMB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
P2041NXE1MMB Максимальные параметры и электрические характеристики
| Product Type | Communications Microprocessor (SoC) |
| Core Architecture | PowerPC e500mc, 32-bit |
| Number of Cores | 4 |
| Core Frequency | 1.2 GHz |
| Series | QorIQ P2 |
| Рабочая температура | -40C to +105C |
| Корпус | 780-FCBGA (23 x 23 mm) |
| Тип монтажа | Surface Mount (BGA) |
| Memory Controller | DDR3/DDR3L with ECC |
| Ethernet Controllers | 3 x 10/100/1000 Mbps eTSEC |
| PCI Express | Gen 2.0 controllers |
| Security Engine | SEC 4.0 (IPsec, SSL, MACsec) |
| Silicon Revision | r1.1 (NXE encrypted variant) |
| Local Bus | 32-bit |
| Статус RoHS | Compliant |
| Lead-Free | Yes |
Руководство по цоколевке P2041NXE1MMB в корпусе 780-fcbga (23 x 23 mm)
Цоколевка для P2041NXE1MMB (корпус 780-fcbga (23 x 23 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для P2041NXE1MMB.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
P2041NXE1MMB подходит для 6 применениеs: Enterprise Routers and Switches, Industrial Control-Plane Gateways, LTE Small-Cell Base Stations, Secure VPN and Firewall Appliances, Military and Aerospace Communications, Network-Attached Storage Controllers.
Enterprise Routers and Switches
The P2041NXE1MMB fits enterprise router and L3 switch control-plane designs because four e500mc cores at 1.2 GHz deliver deterministic throughput for routing-table lookup, ACL processing, and BGP/OSPF convergence. According to the QorIQ P2041 datasheet, the integrated SEC 4.0 engine accelerates IPsec and MACsec, allowing wire-rate encrypted tunnels without offloading to a coprocessor. The encrypted NXE silicon supports secure boot for tamper-resistant firmware validation. Compared with discrete CPU + NIC designs, the SoC integration reduces PCB area and BOM cost for mid-range branch-office routers.
Рекомендуется
Industrial Control-Plane Gateways
The P2041NXE1MMB suits industrial control-plane gateways and SCADA aggregation routers because the -40C to +105C industrial thermal envelope tolerates outdoor enclosures and factory-floor heat. According to the QorIQ P2041 datasheet, three Gigabit Ethernet controllers and PCI Express Gen 2.0 enable redundant uplink paths and local I/O expansion for PLC and HMI integration. The four-core e500mc architecture runs deterministic real-time control alongside protocol translation stacks. NXE encryption enables secure boot for IEC 62443-compliant critical infrastructure deployments.
Рекомендуется
LTE Small-Cell Base Stations
The P2041NXE1MMB serves LTE small-cell base station baseband and Layer-2 processing because four e500mc cores at 1.2 GHz deliver sufficient throughput for femtocell and picocell user-plane traffic. According to the QorIQ P2041 datasheet, the RapidIO/SerDes lanes connect to companion RF front-end ICs and DSP accelerators, while the DDR3 controller with ECC supports high-bandwidth memory for baseband buffers. Industrial -40C to +105C operation handles outdoor small-cell thermal requirements.
Рекомендуется
Secure VPN and Firewall Appliances
The P2041NXE1MMB is well suited to mid-range VPN concentrator and stateful firewall appliances because the integrated SEC 4.0 engine offloads AES, 3DES, SHA, and Kasumi crypto at line rate. According to the QorIQ P2041 datasheet, the NXE encrypted silicon variant supports secure boot with hardware root-of-trust, required for FIPS 140-2 and Common Criteria certified appliances. The 780-FCBGA package exposes enough PCI Express lanes for crypto accelerator expansion when higher throughput is required.
Рекомендуется
Military and Aerospace Communications
The P2041NXE1MMB fits military and aerospace tactical radio and command-and-control nodes because the encrypted NXE silicon supports anti-tamper and secure-boot requirements for deployed systems. According to the QorIQ P2041 datasheet, the -40C to +105C industrial thermal envelope plus the deterministic e500mc architecture handle MIL-STD-810 shock and vibration environments. The Power Architecture software ecosystem inherited from P1/P3/P4/P5 families preserves existing investment in mission-critical code.
Рекомендуется
Network-Attached Storage Controllers
The P2041NXE1MMB functions as a storage controller SoC in mid-range NAS and iSCSI SAN appliances because four cores at 1.2 GHz handle RAID parity computation, file-system metadata, and iSCSI protocol offload concurrently. According to the QorIQ P2041 datasheet, the DDR3 controller with ECC preserves data integrity through memory errors, and the SEC 4.0 engine accelerates AES-XTS for self-encrypting drive management. The three Gigabit Ethernet controllers support MPIO link aggregation for storage redundancy.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для P2041NXE1MMB — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | P2041NSE1MMB | P2041NXN1MMB | P2020NSE1MMB | P4040NSE1MMB | P2040NXE1MMB |
|---|---|---|---|---|---|---|
| Package | 780-FCBGA (23x23 mm) | 780-FCBGA (23x23 mm) - same | 780-FCBGA (23x23 mm) - same | 780-FCBGA (23x23 mm) - same | 780-FCBGA (23x23 mm) - same | 780-FCBGA (23x23 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Number of Cores | 4 | 4 | 4 | 2 (-50%) | 4 | 4 |
| Core Frequency | 1.2 GHz | 1.2 GHz | 1.2 GHz | 1.2 GHz | 1.5 GHz+ (higher) | 1.2 GHz |
| Encryption / Secure Boot | Yes (NXE encrypted) | No (NSE non-encrypted) | Yes (NXE) | No (NSE) | No (NSE) | Yes (NXE) |
| Operating Temperature | -40C to +105C (MMB) | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| Series | QorIQ P2 | QorIQ P2 | QorIQ P2 | QorIQ P2 | QorIQ P4 | QorIQ P2 |
| Silicon Revision | r1.1 (encrypted NXE) | r1.1 (NSE) | r1.x (NXE) | r1.1 (NSE) | r1.x (NSE) | r1.1 (NXE) |
Ключевые отличия
- Encrypted silicon with secure boot support (против P2041NSE1MMB)
- Quad-core throughput in the QorIQ P2 family (против P2020NSE1MMB)
- Power Architecture software compatibility (против Broadcom BCM56xxx)
Заметки по проектированию
The 780-FCBGA package requires a thermal management strategy per NXP application note AN3949. A heat-spreader or heatsink with thermal interface material is mandatory at full 1.2 GHz load; the device dissipates several watts under worst-case Dhrystone workloads. Validate junction temperature with on-die thermal diode readings and keep Tj below 105C for the MMB industrial grade. PCB copper pour under the package and inner-layer thermal vias improve heat spreading.
The 780-ball FCBGA at 23 x 23 mm demands a high-density PCB with microvia or stacked-via technology; conventional 4-layer designs cannot fan out all signals. Use NXP's reference design files for layer stackup and via pattern. Match DDR3 trace lengths within the tolerances specified in the QorIQ P2041 hardware documentation and follow write/read separation rules for the DDR3 controller with ECC to preserve signal integrity.
Confirm P2041NXE1MMB is the correct silicon revision before ordering large volumes, since the NXE encrypted variant carries secure-boot firmware that some applications may not require. Lifecycle is NRND; long-term production plans should include a transition path to the NXP Layerscape LS1043A or LS1088A families. Verify RCW (reset configuration word) settings against the latest QorIQ P2041 reference manual, as revision r1.1 added errata workarounds.
Информация о соответствии
RoHS and REACH compliant per distributor listings. Industrial MMB temperature grade per NXP QorIQ P2041 datasheet; AEC-Q100 not applicable for networking SoC.
