P3041NSN7MMC - QorIQ P3041 4-Core 1.2GHz PowerPC SoC | NXP
Артикул: P3041NSN7MMC ✓ АктивенP3041NSN7MMC Обзор
A QorIQ communications processor is a multi-core Power Architecture SoC designed by NXP/Freescale for embedded networking workloads such as multi-gigabit routing, switching, and security acceleration. Within the broader taxonomy, the QorIQ P3 sits between the entry P1/P2 devices and the higher-end P4/P5 platforms, sharing architectural features with the P4080 and P4040 (quad/octal-core siblings) so that a single software base and PCB design can scale across performance points.
Key features of the P3041 include four e500mc cores with dual-issue, out-of-order execution, hardware hypervisor partitions, Data Path Acceleration Architecture (DPAA) for protocol offload, an integrated 32-bit DDR3/DDR3L memory controller with ECC, multiple SerDes lanes supporting PCIe 2.0, SATA 2.0, SRIO, and 1 GbE/10 GbE interfaces, plus security accelerators for encryption and pattern matching. Power is delivered through an on-chip voltage regulator module fed from a 0.95 V to 1.1 V core supply with separate I/O rails.
The device implements a coherent CoreNet switch fabric that ties cores, caches, DDR controller, and I/O blocks at full bandwidth, eliminating the northbridge bottleneck of earlier PowerQUICC devices. Three-level cache hierarchy (per-core L1, shared L2, and platform-level L3) reduces average memory latency, while the hardware hypervisor supports multiple OS partitions with strict isolation.
Typical applications include industrial control and ruggedized networking routers, secure multi-gigabit gateways, military/aerospace communication systems, LTE/WiFi base-station control planes, and high-performance industrial embedded computing platforms. Within these systems the P3041 typically terminates control traffic, runs a real-time OS or Linux alongside management software, and accelerates packet inspection via DPAA.
When designing with the P3041, careful attention must be paid to the FCBGA substrate routing and DDR3L signal integrity - the 1295-ball package demands a high-density, impedance-controlled PCB. Power-rail sequencing is mandatory because of the integrated VRM; consult the P3041 QorIQ Integrated Processor Hardware Specifications document for sequencing, thermal, and SerDes reference-clock constraints before committing to a layout.
This page synthesizes distributor pricing, drop-in pin-compatible alternatives (P4040, P4080 family), and practical design considerations not consolidated on the manufacturer product page.
Аналоги без доработки для P3041NSN7MMC — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с P3041NSN7MMC (тот же форм-фактор и посадочное место) — отличается по Manufacturer, Operating Temperature Range, Package.
P4040NSN7MMC
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
P4080NSN7MMC
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
P3041NXN7MMC
✅ Прямая заменаУточнить цену
Открыть даташит →P5010NSN7MMC
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
P5020NSN7MMC
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
P3041NSN7MMC Максимальные параметры и электрические характеристики
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | QorIQ P3 |
| Architecture | Power Architecture e500mc, 32-bit |
| Core Count | 4 |
| Maximum Core Frequency | 1.2 GHz |
| Диапазон рабочих температур | 0C to +105C |
| Memory Controller | 32-bit DDR3/DDR3L with ECC |
| Cache Hierarchy | 3-level (per-core L1, shared L2, platform L3) |
| Fabric | CoreNet coherent switch fabric |
| Virtualization | Hardware hypervisor partitions |
| Acceleration | DPAA (Data Path Acceleration Architecture) |
| High-Speed I/O | PCIe 2.0, SATA 2.0, SRIO, 1 GbE / 10 GbE SerDes |
| Корпус | 1295-pin FCBGA (37.5x37.5 mm) |
| Тип монтажа | Surface Mount |
| Silicon Revision | Rev 2 |
Руководство по цоколевке P3041NSN7MMC в корпусе 1295-pin fcbga (37.5x37.5 mm)
Цоколевка для P3041NSN7MMC (корпус 1295-pin fcbga (37.5x37.5 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для P3041NSN7MMC.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
P3041NSN7MMC подходит для 6 применениеs: Industrial Networking Router, Secure Multi-Tenant Gateway, Ruggedized Military/Aerospace Communication System, LTE/WiFi Base Station Control Plane, Industrial Embedded Computing Platform, Storage Controller / RAID Appliance.
Industrial Networking Router
The P3041NSN7MMC's four e500mc cores at 1.2 GHz plus DPAA packet acceleration make it well suited to industrial routers that aggregate multiple 1 GbE/10 GbE uplinks, perform deep packet inspection, and terminate IPSec tunnels. The integrated 32-bit DDR3L controller with ECC keeps routing tables reliable in harsh industrial environments, while the 0C to +105C temperature range covers most outdoor enclosures without additional thermal management. Placed on the control-plane CPU card, it runs a real-time Linux or VxWorks stack alongside the DPAA engines; unlike a pure network processor it also handles system management tasks without a companion MCU.
Рекомендуется
Secure Multi-Tenant Gateway
The P3041NSN7MMC's hardware hypervisor supports multiple isolated OS partitions for separating tenant workloads on a single SoC, while DPAA offloads encryption, pattern matching, and QoS classification from the cores. Four cores at 1.2 GHz deliver enough compute headroom to run a control VM plus a data-plane VM concurrently without performance collapse. Designers typically pair the P3041 with an external PHY for 10 GbE and place a TPM adjacent for secure boot; the integrated ECC DDR3 controller protects tenant data from silent memory faults during cryptographic operations.
Рекомендуется
Ruggedized Military/Aerospace Communication System
The P3041NSN7MMC's -105C upper temperature limit, ECC-protected DDR3L memory, and QorIQ pedigree make it attractive for rugged military radio and avionics datalink systems where reliability matters more than raw MHz. The CoreNet coherent fabric eliminates external northbridge components, reducing PCB complexity in vibration-prone enclosures, and the SerDes lanes support SRIO for low-latency backplane interconnects to DSP and FPGA co-processors. Designers typically add a supervisory MCU and conformal coating; unlike consumer SoCs the P3041 is specified for long lifecycle programs with stable firmware interfaces over a decade or more.
Рекомендуется
LTE/WiFi Base Station Control Plane
The P3041NSN7MMC integrates four cores, a coherent CoreNet fabric, and SerDes lanes for SRIO and PCIe, allowing it to act as the control-plane CPU of small-cell and macro-cell base stations alongside dedicated baseband DSPs. DPAA accelerates GTP-U and IPSec encapsulation for backhaul traffic without burdening the main cores, while the hardware hypervisor isolates real-time RAN software from Linux management stacks. Placed on the main controller card, it typically connects to a baseband card over PCIe or SRIO; unlike an application processor it tolerates deterministic real-time scheduling and long uptimes demanded by carrier networks.
Рекомендуется
Industrial Embedded Computing Platform
The P3041NSN7MMC's quad-core compute, integrated I/O SerDes, and ECC DDR3 controller make it a strong central processing unit for industrial embedded computing platforms used in factory automation, energy management, and rail signaling. The 0C to +105C operating range supports deployment in non-climate-controlled cabinets, and the hardware hypervisor enables running both a real-time control OS and a Linux HMI stack concurrently on the same silicon. Designers typically pair it with external PHY transceivers and a supervisory MCU; unlike a microcontroller, the P3041 delivers the memory bandwidth and compute throughput required for high-speed data acquisition and deterministic control loops.
Рекомендуется
Storage Controller / RAID Appliance
The P3041NSN7MMC's mix of PCIe 2.0 lanes for host connectivity and SATA 2.0 ports for direct-attach drives makes it suitable for entry-level storage controllers and RAID appliances. The four e500mc cores handle RAID parity computation, iSCSI offload, and management software, while DPAA accelerates CRC and encryption for data-at-rest protection. Placed on a storage controller card, it typically connects to a backplane over SAS expander chips; unlike a discrete RAID controller it runs a full Linux stack for protocol termination and remote management without a companion x86 processor.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для P3041NSN7MMC — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | P4040NSN7MMC | P4080NSN7MMC | P3041NXN7MMC | P5010NSN7MMC | P5020NSN7MMC |
|---|---|---|---|---|---|---|
| Package | 1295-pin FCBGA (37.5x37.5 mm) | 1295-pin FCBGA (37.5x37.5 mm) - same | 1295-pin FCBGA (37.5x37.5 mm) - same | 1295-pin FCBGA (37.5x37.5 mm) - same | 1295-pin FCBGA (37.5x37.5 mm) - same | 1295-pin FCBGA (37.5x37.5 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Platform | QorIQ P3 | QorIQ P4 | QorIQ P4 | QorIQ P3 | QorIQ P5 | QorIQ P5 |
| Core Count | 4 | 4 | 8 | 4 | 1 | 2 |
| Maximum Core Frequency | 1.2 GHz | 1.5 GHz | 1.5 GHz | 1.2 GHz | 1.0 GHz | 1.0 GHz |
| Core Architecture | e500mc (32-bit) | e500mc (32-bit) | e500mc (32-bit) | e500mc (32-bit) | e5500 (64-bit) | e5500 (64-bit) |
| Operating Temperature | 0C to +105C | 0C to +105C | 0C to +105C | -40C to +105C | 0C to +105C | 0C to +105C |
| Pin-to-Pin Compatibility | Reference | Drop-in compatible | Drop-in compatible | Drop-in compatible (same die) | Pin-compatible (different SoC platform) | Pin-compatible (different SoC platform) |
Ключевые отличия
- Pin-compatible across QorIQ P3/P4/P5 family (против P4080NSN7MMC)
- Hardware hypervisor with DPAA on a mid-range P3 platform (против P5010NSN7MMC)
- Commercial 0C to +105C with extended-temp variant available (против P3041NXN7MMC)
Заметки по проектированию
Estimated: At Tj=105C max and a typical theta_JA of ~6 C/W for the FCBGA-1295 with a heat spreader and 1 m/s airflow, the P3041NSN7MMC can dissipate approximately 15 W before thermal throttling. Designers must specify a heat spreader with thermal interface material rated for the operating environment, and provide at least 2 oz copper inner layers beneath the package to spread heat. Bare-board operation in a sealed enclosure will derate this budget significantly; always refer to NXP's thermal model document for the specific board stack-up.
The 1295-pin FCBGA at 37.5x37.5 mm requires high-density interconnect PCB with microvia (laser-drilled) stack-ups and matched-length SerDes routing. DDR3L traces must be length-matched within 25 mils and routed on inner stripline layers with controlled impedance (typically 50 ohm single-ended, 100 ohm differential for SerDes). A minimum of 8 PCB layers is recommended, with continuous ground planes on layers 2 and 7 to provide reference for the high-speed signals.
The P3041NSN7MMC integrates a voltage regulator module that requires a 0.95 V to 1.1 V core supply plus separate I/O rails; power-rail sequencing per NXP's hardware specifications is mandatory to prevent latch-up. Decoupling requires high-frequency 0.1 uF X7R capacitors placed within 100 mils of each power pin, plus bulk 22 uF polymer capacitors on each rail. Use a PMIC with margining capability to support burn-in and field diagnostics.
Do not assume DDR3L is electrically compatible with DDR3 across all parameters - the P3041 supports both but the I/O voltage must match the chosen DRAM (1.35 V vs 1.5 V). The integrated VRM requires a specific inductor and capacitor network on the board; substituting parts outside NXP's BOM may cause core voltage ripple. Finally, confirm the silicon revision (Rev 2 vs Rev 1.0) when sourcing from distribution channels, as early revisions have known errata documented in the P3041 device errata sheet.
Информация о соответствии
RoHS and lead-free status extracted from NXP QorIQ product family documentation; AEC-Q100 not applicable (this is an industrial-grade communications processor, not an automotive MCU). REACH and halogen-free status not explicitly stated in the verified data and marked unknown.
