PEX8619-BA50BI - 16-Lane PCIe Gen 2 Switch | Broadcom
Артикул: PEX8619-BA50BI ✗ Снят с производстваPEX8619-BA50BI Обзор
A PCIe switch is a semiconductor in the interface IC hierarchy that routes PCI Express transactions between a root complex or host bridge and multiple downstream devices. A Gen 2 PCIe link provides a 5 GT/s signaling rate per lane, while lane width determines the aggregate theoretical bandwidth of an individual link. The PEX8619-BA50BI combines multi-port switching and DMA capabilities to support complex embedded and control-plane architectures.
Key product characteristics include support for 16 PCIe lanes and 16 ports, Gen 2 operation, and DMA. The Broadcom listing identifies a 324-HSBGA package with a 19 mm by 19 mm body. The package is intended for high-density board layouts in which careful ball assignment, reference-plane continuity, power distribution, and thermal management are essential.
The integrated switching fabric provides a central point for organizing multiple PCIe links in embedded systems, storage appliances, industrial controllers, and test equipment. DMA capability can move data between memory and PCIe devices, helping distribute transfer work between the host processor and dedicated DMA engines. The exact supported topology, endpoint bifurcation, completion ordering, and operating modes should be confirmed against the manufacturer documentation before final system configuration.
Typical uses include PCIe expansion in embedded control systems, multi-device test platforms, data-acquisition equipment, storage controllers, and industrial communication systems. Because the device exposes many lanes and ports, board design must account for connector placement, lane routing, clock distribution, auxiliary-power sequencing, and the high pin count of the HSBGA package.
Design planning should begin with lane budget, topology, firmware support, and package-level power delivery rather than treating the switch as a conventional discrete component. Reference-plane continuity and short high-speed routes are necessary for predictable PCIe performance, while thermal analysis should cover both local junction heating and the effect of adjacent board components.
This product page combines package, interface, application, and replacement information into a design-focused reference for engineers evaluating the PEX8619-BA50BI. It also identifies the limits of the available evidence: complete ball assignments, electrical characteristics, supported feature combinations, and lifecycle details must be verified through Broadcom documentation and approved sourcing channels.
Аналоги без доработки для PEX8619-BA50BI — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
PEX8619-BA50BIG
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PEX8619-BA50BI-G
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PEX8619-BA50BC-G
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PEX8619-BA50BI Максимальные параметры и электрические характеристики
| Product Type | PCI Express switching semiconductor |
| PCI Express Generation | Gen 2 |
| PCI Express Lane Count | 16 lanes |
| Port Count | 16 ports |
| DMA Support | Yes |
| Hot-Swap Protection | Supported |
| Корпус | 324-HSBGA (19 mm x 19 mm) |
| Ball Count | 324 balls |
| Device Classification | Control-plane, embedded-systems, fanout, and intelligent I/O interface |
| PCI Express Link Signaling Rate | 5 GT/s per Gen 2 lane |
Руководство по цоколевке PEX8619-BA50BI в корпусе 324-hsbga (19 mm x 19 mm)
Цоколевка для PEX8619-BA50BI (корпус 324-hsbga (19 mm x 19 mm)). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для PEX8619-BA50BI.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
PEX8619-BA50BI подходит для 6 применениеs: Embedded PCIe Control Plane, Data-Acquisition Systems, Industrial Test Equipment, Storage Controller Aggregation, PCIe Fanout and Backplanes, Network and Communication Appliances.
Embedded PCIe Control Plane
The PEX8619-BA50BI fits centralized embedded control systems that must connect several PCIe endpoints to a host or root complex. Its 16 lanes and 16 ports provide routing resources for multiple adapters, while the integrated DMA capability can offload transfers between device memory and the host environment. The 324-HSBGA package is appropriate for a dense multilayer PCB with short, reference-plane-backed routes. Before committing to a topology, confirm lane-to-port mapping, endpoint bifurcation behavior, firmware support, and the auxiliary-power sequence for every attached device. The Gen 2 signaling rate also makes backward-compatible design planning important when the platform must accept older endpoint generations.
Рекомендуется
Data-Acquisition Systems
The PEX8619-BA50BI is suited to data-acquisition systems that need multiple high-speed PCIe data sources behind one switch point. Sixteen lanes and sixteen ports allow designers to build a structured acquisition backplane rather than attaching every instrument or converter directly to a host controller. DMA support can make transfers more efficient when the host must move large blocks of measurement data. Board implementation should reserve continuous reference planes, provide carefully filtered auxiliary rails, and preserve clock and reset routing across all endpoints. Designers should also validate lane equalization, connector mechanical requirements, and peer-to-peer behavior in the selected Broadcom firmware configuration before releasing production hardware.
Рекомендуется
Industrial Test Equipment
The PEX8619-BA50BI can serve as the routing hub in industrial test and measurement equipment that combines several PCIe cards, analyzers, or programmable instruments. Its switch and DMA functions help consolidate multiple device relationships behind one host-facing fabric, reducing the need for separate host bridges when the chassis can accommodate a high-density board. The principal engineering challenge is physical rather than functional: a 324-HSBGA demands advanced PCB assembly, fine-pitch inspection, and thermal-via design. Use the manufacturer reference design and package data to establish power sequencing, lane routing, connector placement, and thermal conditions, then confirm that the production test image supports the intended enumeration and error-recovery behavior.
Рекомендуется
Storage Controller Aggregation
The PEX8619-BA50BI can support storage-oriented systems that need to aggregate multiple PCIe endpoint relationships behind a common switch. Its 16-lane capacity provides more aggregate connectivity than a small embedded switch, while the 16-port count allows a more flexible internal topology when the board also supports management or network functions. DMA support may assist with moving data between storage endpoints and host memory. The design should account for simultaneous traffic patterns, congestion at shared upstream links, connector and cable losses, and thermal loading from high-power storage adapters. Confirm supported peer-to-peer configurations, maximum endpoint count, reset behavior, and power requirements with Broadcom before treating the device as a transparent PCIe multiplexer.
Рекомендуется
PCIe Fanout and Backplanes
The PEX8619-BA50BI is applicable to fanout and backplane architectures where a common upstream PCIe connection must feed multiple downstream ports. The 16-lane, 16-port configuration creates a centralized routing element for equipment with several card slots or peripheral carriers. Its hot-swap protection is relevant to systems where individual modules may be inserted, removed, or fault-isolated, although the complete power and reset design must still satisfy PCIe expectations. Board planning should prioritize lane assignment, connector reach, reference-plane continuity, and chassis airflow. Since the switch resides in a dense 19 mm by 19 mm HSBGA package, assembly yield and BGA inspection capability should be evaluated early in the hardware schedule.
Рекомендуется
Network and Communication Appliances
The PEX8619-BA50BI can support network and communication appliances in which PCIe-connected accelerators, storage elements, or security engines share a host-facing link. Sixteen lanes provide substantial shared upstream bandwidth, and DMA capability can help separate transfer handling from the primary control processor. The device is most appropriate when the appliance requires centralized endpoint management and can accommodate the electrical, firmware, and thermal complexity of a high-density PCIe switch. Design teams should model upstream and downstream traffic asymmetry, use the manufacturer topology guidance, and verify that the intended endpoints support the required Gen 2 link configuration. Adequate airflow and distributed power delivery are also important because neighboring accelerators may increase board temperature beyond conditions suitable for the switch.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PEX8619-BA50BI — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PEX8619-BA50BIG | PEX8619-BA50BI-G | PEX8619-BA50BC-G |
|---|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom | Broadcom |
| Package | 324-HSBGA (19 mm x 19 mm) | 324-HSBGA (19 mm x 19 mm) | 324-HSBGA (19 mm x 19 mm) | 324-HSBGA (19 mm x 19 mm) |
| Core Silicon | PEX8619 BA switching platform | Same core silicon and functionality | PEX8619-BA50BI-G ordering form | Same switching architecture indicated; exact silicon identity not quantified |
Ключевые отличия
- High-density PCIe switching in a single device (против PEX8619-BA50BI-G)
- Documented same-silicon sourcing relationship (против PEX8619-BA50BIG)
- Centralized switch and DMA integration (против PEX8619-BA50BC-G)
Заметки по проектированию
Route every high-speed PCIe lane over a continuous reference plane with no plane splits across the switching device or connector region. Match the ball-escape pattern to the board stack-up, minimize via transitions, and apply the length-tolerance rules in the manufacturer platform documentation. Keep clock and reset distribution isolated from aggressor-bearing data paths. A 324-HSBGA footprint should be reviewed against the fabricator's fine-pitch assembly and inspection capability before schematic release.
Establish separate power budgets for the core, auxiliary rails, and attached PCIe endpoints, then verify sequencing against every endpoint's operational limits. Use the manufacturer package data to identify all core, ground, and auxiliary ball groups; do not infer power connections from the product family alone. Decoupling should be distributed close to the switch, and transient-load tests should cover endpoint enumeration, full-link training, DMA bursts, and hot-swap recovery.
Estimated: thermal performance must be evaluated from the final maximum switch dissipation, ambient temperature, package thermal resistance, via geometry, and adjacent heat sources. These values are not established by the product record, so no numerical junction-temperature result can be used for design signoff. Place thermal vias beneath the BGA where permitted, keep major heat sources away from the switch, and validate the populated assembly with thermocouples or an infrared measurement under worst-case traffic and ambient conditions.
Информация о соответствии
The product is a PCIe interface switching semiconductor; automotive qualification is not identified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from Broadcom.