PIC12C509A/JW - 8-Bit CMOS MCU, 1.5KB EPROM, 4MHz | Microchip
Артикул: PIC12C509A/JW ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $14.5 | $14,50 |
| 10 | $13.1 | $131,00 |
| 100 | $11.75 | $1.175,00 |
| 500 | $10.5 | $5.250,00 |
| 1.000 | $9.4 | $9.400,00 |
PIC12C509A/JW Обзор
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (ROM/RAM), and peripherals into one package. The PIC12C509A belongs to Microchip's PIC® 12C family of 8-bit microcontrollers, which sit within the broader 8-bit MCU -> microcontroller -> embedded processor -> semiconductor taxonomy. The 12C series targets cost-sensitive, space-constrained applications where minimal pin count and ultra-low power consumption outweigh computational throughput.
Key features include 5 GPIO-capable pins (GP0-GP5 with GP3 shared with MCLR/VPP), a wide operating voltage range of 2.5V to 5.5V, low-power CMOS EPROM technology, a fully static design allowing clock halt, and an internal RC oscillator option to reduce external component count. The device draws microamp-level current in sleep mode and integrates a power-on reset (POR) and watchdog timer (WDT) for reliable unattended operation. The 8-pin footprint makes it one of the smallest PIC microcontrollers in production.
The PIC12C509A uses a RISC Harvard architecture with separate program and data buses, an 8-bit data path, and a 12-bit instruction word. EPROM-based program memory allows the device to be erased with UV light through the /JW window and reprogrammed multiple times, making it well suited for prototyping, education, and small-batch industrial designs. The architecture supports a hardware stack and direct/indirect addressing modes, with all instructions executing in a single instruction cycle except for program branches (two cycles).
Typical applications include automotive sensor interfaces, industrial control logic, appliance subsystems, security alarm panels, low-end consumer devices, and educational microcontroller coursework. The 8-pin footprint suits retrofits into legacy through-hole designs, and the OTP windowed variant is especially useful during firmware development before committing to the lower-cost OTP (one-time-programmable) production variants like PIC12C509A-04/P or PIC12C509A-04I/SM.
When designing with the /JW variant, note that the ceramic windowed package costs roughly 3-5x more than the plastic OTP versions and is intended for development use only. For volume production, migrate firmware to PIC12C509A-04/P (PDIP) or PIC12C509A-04I/SM (SOIC) once code is finalized. The /JW part is marked obsolete by several distributors but remains stocked at niche suppliers for legacy development work.
This page synthesizes distributor pricing, same-brand drop-in alternatives from Microchip's PIC12 family, lifecycle status, and practical design notes not assembled in any single manufacturer datasheet, helping engineers decide between the /JW windowed prototype part and modern Flash-based replacements.
Аналоги без доработки для PIC12C509A/JW — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC12C509A/JW (тот же форм-фактор и посадочное место) — отличается по Program Memory Size, Package, Program Memory Type, I/O Pins, Core Architecture.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC12C509A-04E/JW
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC12C509A-04I/JW
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC12C509A-04/JW
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC12C509A/JW Максимальные параметры и электрические характеристики
| Core Architecture | Enhanced PIC16C5X (8-bit RISC Harvard) |
| Program Memory Type | EPROM (UV-erasable, windowed) |
| Program Memory Size | 1.5 KB (1K x 12) |
| RAM Size | 41 bytes |
| Максимальная тактовая частота | 4 MHz |
| Instruction Cycle Time | 1 us at 4 MHz |
| Number of Instructions | 33 single-word |
| I/O Pins | 5 (GP0-GP2, GP4-GP5; GP3 = MCLR/VPP) |
| Operating Voltage Range | 2.5 V to 5.5 V |
| Package Type | 8-CDIP Windowed (JW) |
| Тип монтажа | Through Hole |
| Число выводов | 8 |
| Диапазон рабочих температур | -40 C to +85 C (industrial) |
| Oscillator Modes | External RC, External Crystal, Internal RC |
| Peripherals | WDT, POR, Power-Saving Sleep mode |
| Статус RoHS | Non-compliant (contains leaded ceramic) |
Конфигурация выводов PIC12C509A/JW
| Контакт 1 | VDD — Positive supply voltage (2.5V to 5.5V) |
| Контакт 2 | GP5/OSC1/CLKIN — General-purpose I/O / oscillator input / external clock input |
| Контакт 3 | GP4/OSC2/AN3/CLKOUT — General-purpose I/O / oscillator output / clock output |
| Контакт 4 | GP3/MCLR/VPP — General-purpose input / Master Clear reset / programming voltage |
| Контакт 5 | GP2/T0CKI — General-purpose I/O / Timer0 clock input |
| Контакт 6 | GP1 — General-purpose bidirectional I/O |
| Контакт 7 | GP0 — General-purpose bidirectional I/O |
| Контакт 8 | VSS — Ground reference |
Типичное применение
PIC12C509A/JW подходит для 6 применениеs: Automotive Sensor Interface Logic, Industrial Control and Appliance Subsystems, Security Alarm Panel Auxiliary Logic, Low-End Consumer Device Controllers, Educational Microcontroller Coursework, Legacy Through-Hole Retrofit Designs.
Automotive Sensor Interface Logic
The PIC12C509A/JW fits automotive sensor interfaces because its 8-bit PIC16C5X core, 5 GPIO pins, and 2.5V-5.5V supply accept 5V sensor signals directly without level translation. At 4MHz the 1 microsecond instruction cycle handles simple threshold detection, pulse counting, and H-bridge direction control loops. The wide -40C to +85C industrial temperature range suits under-hood sensor modules. In typical use the MCU reads a thermistor or Hall sensor on GP0/GP1, debounces in firmware, and drives a relay or warning LED on GP4/GP5. The EPROM memory and Microchip heritage made it popular for legacy automotive body-control modules before Flash-based PIC12F and PIC16F migration.
Рекомендуется
Industrial Control and Appliance Subsystems
The PIC12C509A/JW serves cost-sensitive industrial control and appliance subsystems where its 8-pin footprint and minimal BOM matter more than computational throughput. The 33 single-word RISC instructions and hardware stack simplify state-machine firmware for washing machine timers, microwave user interfaces, and HVAC damper actuators. The internal RC oscillator option eliminates an external crystal, reducing the design to MCU plus decoupling caps. Its fully static design allows clock halt for power-saving sleep modes critical in battery-backed appliance clocks. The windowed /JW variant lets engineers prototype and refine control algorithms before committing code to the lower-cost OTP plastic package for high-volume appliance production runs.
Рекомендуется
Security Alarm Panel Auxiliary Logic
Security alarm panels frequently deploy a PIC12C509A/JW as auxiliary logic for zone monitoring, siren driver sequencing, and keypad scanning. The 5 GPIO pins accommodate a 4-wire keypad interface plus one status LED, with the remaining I/O driving a piezo siren driver. At 4MHz the instruction cycle keeps debounce and polling latency under 100 microseconds. The integrated watchdog timer (WDT) resets the MCU on firmware lockup, a critical reliability feature in unattended alarm systems. The wide 2.5V-5.5V supply accepts backup-battery voltages directly during AC power loss. The windowed ceramic package allows secure firmware updates during installation and service intervals.
Рекомендуется
Low-End Consumer Device Controllers
The PIC12C509A/JW drives low-end consumer products such as remote controls, electronic toys, novelty gadgets, and small kitchen appliances where bill-of-material cost is the dominant constraint. Its sub-$10 pricing at prototype quantities, 8-pin through-hole footprint, and single-instruction-cycle RISC performance handle infrared RC5 transmission, motor PWM, and simple LED chasing patterns. The internal oscillator mode and on-chip reset circuitry reduce external components to a handful of passives. Microchip's mature PIC toolchain (MPLAB X, XC8 compiler) makes firmware development accessible to hobbyist and small-business designers. The windowed /JW package suits prototype and pre-production runs where firmware iteration is expected.
Рекомендуется
Educational Microcontroller Coursework
Universities and technical institutes use the PIC12C509A/JW in embedded systems coursework because the 8-pin DIP form factor is easy to breadboard, the 33-instruction RISC set is approachable for assembly language pedagogy, and the windowed package lets students erase and reuse the same silicon across lab sessions. The predictable 1 microsecond instruction cycle simplifies timing analysis before students encounter timer peripherals in later PIC16 courses. The classic PIC architecture also introduces students to Harvard memory organization and accumulator-based design that later translates to dsPIC and ARM Cortex-M parts. A 4MHz ceramic resonator suffices for the clock source, keeping lab kits inexpensive.
Рекомендуется
Legacy Through-Hole Retrofit Designs
The PIC12C509A/JW is frequently specified in legacy through-hole retrofits where a product was originally designed around the PIC12C508/509 family and needs a 1:1 replacement part number for service and repair. Its 8-pin CDIP package accepts the same through-hole pads as the original PIC12C509A or PIC12C508 designs, avoiding PCB rework. The windowed variant specifically supports field repair scenarios where erased and reprogrammed parts replace failed units without requiring UV eraser access. This is also the use case where Microchip's last-time-buy and obsolete-stock channel partners see continuing PIC12C509A/JW demand years after active production.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC12C509A/JW — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC12C509A-04E/JW | PIC12C509A-04I/JW | PIC12F509-I/P | PIC12C509-04/P |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-CDIP Windowed | 8-CDIP Windowed - same | 8-CDIP Windowed - same | 8-PDIP - similar footprint | 8-PDIP - similar footprint |
| Program Memory | 1.5 KB EPROM (UV) | 1.5 KB EPROM (UV) | 1.5 KB EPROM (UV) | 1.5 KB Flash | 1.5 KB EPROM (OTP) |
| RAM | 41 bytes | 41 bytes | 41 bytes | 41 bytes | 41 bytes |
| Max Clock | 4 MHz | 4 MHz | 4 MHz | 8 MHz | 4 MHz |
| Operating Voltage | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.0 V to 5.5 V | 2.5 V to 5.5 V |
| GPIO Pins | 5 | 5 | 5 | 6 (GP3 freed from MCLR on ICSP variants) | 5 |
| Programming Method | UV EPROM erase | UV EPROM erase | UV EPROM erase | ICSP Flash | One-time programmable |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Active | Obsolete |
Ключевые отличия
- Windowed UV-erasable ceramic CDIP package allows multiple reprogramming cycles for prototyping and education (против PIC12C509A-04/P)
- Industry-standard Microchip PIC16C5X core with 33 single-word instructions and 1us instruction cycle (против PIC12F509-I/P)
- Wide 2.5V-5.5V supply range accepts battery and regulated 5V rails without level shifters (против PIC12F509-I/P)
Заметки по проектированию
The /JW windowed ceramic DIP package must be erased under a UV lamp rated at 253.7nm wavelength for 20-30 minutes before reprogramming; partial erasure leaves residual bits that cause erratic firmware behavior. Always verify erasure by reading all program memory locations to 0xFFF before writing new code. Ceramic windowed packages are not RoHS-compliant and should not be used in new consumer designs.
Estimated: At VDD=5V and 4MHz external clock, the PIC12C509A/JW draws approximately 2 mA active current and drops to about 1 uA in sleep mode. For battery-powered designs add a 100 nF decoupling cap within 5 mm of the VDD pin (pin 1) and a 10 uF bulk capacitor on the supply rail. The MCLR pin (pin 4) should be pulled to VDD through a 10 kohm resistor to avoid spurious resets from EMI.
Route the oscillator traces (GP5/OSC1 and GP4/OSC2) as short as possible and keep them away from high-current switching traces to minimize EMI coupling. Place the decoupling capacitor directly between VDD and VSS pins with the ground via adjacent to the VSS pin. For through-hole designs, twist the VDD/VSS pair where possible to reduce inductive supply noise during GPIO transitions.
The 8-CDIP ceramic package has a thermal resistance of approximately 100 C/W (theta_JA) in still air. At typical 2 mA active current the dissipation is 10 mW at 5V, well below the 700 mW absolute maximum. The windowed ceramic package is more tolerant of thermal cycling than plastic PDIP variants, making it suitable for development kits that may be reprogrammed thousands of times.
Информация о соответствии
The /JW windowed ceramic CDIP package contains lead and is non-RoHS; it predates the RoHS directive. Modern production variants like PIC12C509A-04I/SM in plastic packages are RoHS-compliant.
