PIC16C55-10E/P - 8-bit OTP MCU 10MHz 768B | 28-PDIP | Microchip
Артикул: PIC16C55-10E/P ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $7.5 | $7,50 |
| 10 | $6.8 | $68,00 |
| 100 | $5.95 | $595,00 |
| 500 | $5.2 | $2.600,00 |
| 1.000 | $4.65 | $4.650,00 |
PIC16C55-10E/P Обзор
An 8-bit OTP microcontroller is a compact single-chip computer with non-volatile one-time-programmable program memory, a small RAM, and a CPU plus peripherals on one die. The PIC16C55 belongs to the broader product hierarchy: PIC16C5X -> PIC16C family -> PICmicro 8-bit microcontroller -> microcontroller -> embedded processor -> semiconductor. Engineers select OTP parts like the PIC16C55 for low-cost, fixed-function consumer and industrial products where firmware is final at production time and field reprogramming is not required.
Key differentiating features include the 12-bit-wide instruction word providing roughly 2:1 code compression versus other 8-bit MCUs in its class, a low-power CMOS architecture with sleep current in the microamp range, and a Harvard bus structure separating program and data memory for deterministic execution. The 20 I/O pins each source or sink up to 25 mA, allowing direct LED and small-solenoid drive without external transistors. The integrated watchdog timer and power-on reset reduce external component count for brown, low-cost designs.
Typical application domains include appliance control, security keypads, remote-control transmitters, simple sensor interfaces, hobby electronics, and low-end industrial controllers. The wide -40 °C to +125 °C extended grade suits automotive under-hood and outdoor industrial enclosures. The 28-PDIP package is favored for hand-soldered prototypes, educational kits, and low-volume production where socketed replacement simplifies field service.
When designing with the PIC16C55-10E/P, plan a stable 5 V rail with adequate bulk decoupling, reserve the MCLR pin for a proper reset network, and ensure the high-current I/O pins do not exceed the package's total current budget. The OTP memory requires programming prior to final assembly since it cannot be erased or rewritten.
Аналоги без доработки для PIC16C55-10E/P — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC16C55-10E/P (тот же форм-фактор и посадочное место) — отличается по Operating Temperature, Program Memory Size, Watchdog Timer, Instruction Cycle Time, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC16C55-10I/P
✅ Прямая замена✓ В наличии
$2.58 / шт.
Открыть даташит →PIC16C55-10/SP
✅ Прямая замена✓ В наличии
$2.45 / шт.
Открыть даташит →PIC16C55-10E/SP
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC16C55-10I/SP
✅ Прямая замена✓ В наличии
$2.75 / шт.
Открыть даташит →PIC16C55-HSI/P
✅ Прямая замена✓ В наличии
$2.6 / шт.
Открыть даташит →PIC16C55-10E/P Максимальные параметры и электрические характеристики
| Core Architecture | PIC16C5X (8-bit Harvard) |
| Program Memory Type | OTP (One-Time-Programmable) |
| Program Memory Size | 768 bytes (512 x 12) |
| RAM Size | 24 bytes |
| CPU Speed | 10 MHz |
| Instruction Width | 12-bit |
| Operating Voltage | 4.5 V to 5.5 V |
| I/O Pins | 20 |
| I/O Current per Pin | 25 mA source/sink |
| Timers | 1 x 8-bit (TMR0) + WDT |
| Watchdog Timer | Yes (on-chip) |
| Reset | POR (Power-on Reset), MCLR |
| Рабочая температура | -40 °C to +125 °C (Extended "E") |
| Корпус | 28-pin PDIP (0.600", 15.24 mm) |
| Тип монтажа | Through-Hole (THT) |
Конфигурация выводов PIC16C55-10E/P
| Контакт 1 | RA2 — Bidirectional I/O, PORTA bit 2 |
| Контакт 2 | RA3 — Bidirectional I/O, PORTA bit 3 |
| Контакт 3 | RTCC — RTCC timer I/O pin / PORTA bit 4 |
| Контакт 4 | MCLR — Master Clear reset (active low) |
| Контакт 5 | VSS — Ground reference |
| Контакт 6 | RB0 — Bidirectional I/O, PORTB bit 0 |
| Контакт 7 | RB1 — Bidirectional I/O, PORTB bit 1 |
| Контакт 8 | RB2 — Bidirectional I/O, PORTB bit 2 |
| Контакт 9 | RB3 — Bidirectional I/O, PORTB bit 3 |
| Контакт 10 | RB4 — Bidirectional I/O, PORTB bit 4 |
| Контакт 11 | RB5 — Bidirectional I/O, PORTB bit 5 |
| Контакт 12 | RB6 — Bidirectional I/O, PORTB bit 6 |
| Контакт 13 | RB7 — Bidirectional I/O, PORTB bit 7 |
| Контакт 14 | VSS — Ground reference |
| Контакт 15 | OSC1 — Crystal oscillator input |
| Контакт 16 | OSC2 — Crystal oscillator output |
| Контакт 17 | RC0 — Bidirectional I/O, PORTC bit 0 |
| Контакт 18 | RC1 — Bidirectional I/O, PORTC bit 1 |
| Контакт 19 | RC2 — Bidirectional I/O, PORTC bit 2 |
| Контакт 20 | RC3 — Bidirectional I/O, PORTC bit 3 |
| Контакт 21 | RC4 — Bidirectional I/O, PORTC bit 4 |
| Контакт 22 | RC5 — Bidirectional I/O, PORTC bit 5 |
| Контакт 23 | RC6 — Bidirectional I/O, PORTC bit 6 |
| Контакт 24 | RC7 — Bidirectional I/O, PORTC bit 7 |
| Контакт 25 | VDD — Positive supply (4.5 V to 5.5 V) |
| Контакт 26 | RA0 — Bidirectional I/O, PORTA bit 0 |
| Контакт 27 | RA1 — Bidirectional I/O, PORTA bit 1 |
| Контакт 28 | NC — Not connected (per datasheet) |
Типичное применение
PIC16C55-10E/P подходит для 6 применениеs: Appliance Control (Washing Machines, Microwave Keypads), Security Keypad & Access Control Panels, Remote Control & RF Transmitter Encoders, Simple Sensor Interfaces & Data Acquisition Front Ends, Educational Kits & Hobby Electronics Trainers, Low-End Industrial Controllers & Replacement Logic.
Appliance Control (Washing Machines, Microwave Keypads)
The PIC16C55-10E/P is well suited to appliance control boards because its 20 mA-capable I/O pins drive relays, triacs, and LED indicators directly without external transistors. The 768-byte OTP holds typical washing-machine cycle logic, keypad scan routines, and buzzer patterns. The extended -40 °C to +125 °C grade tolerates the high ambient temperature inside an oven-cabinet or near a motor. Brown-out protection via the integrated POR prevents corruption on supply dips, while the watchdog timer resets the controller after firmware lockups.
Рекомендуется
Security Keypad & Access Control Panels
Security keypads and access-control panels benefit from the PIC16C55-10E/P's low power CMOS architecture, 20 digital I/O for scanning 4x4 key matrices, and one-time-programmable memory that locks firmware against reverse engineering. The 768-byte OTP stores debounce tables, credential logic, and tamper-detection handlers. The watchdog timer recovers the panel after a firmware stall. The DIP package simplifies socketed replacement during field service calls, and the wide 4.5-5.5 V supply range operates directly from a regulated alarm-bus rail.
Рекомендуется
Remote Control & RF Transmitter Encoders
Remote control transmitters and RF encoder circuits use the PIC16C55-10E/P for low-cost, fixed-function code generation where OTP memory prevents over-the-air firmware tampering. The 10 MHz core delivers ample throughput for IR/RF protocol encoding (RC5, NEC, proprietary), while 20 I/O drive status LEDs and keypad rows. Sleep current in the microamp range extends battery life in handheld units. The 28-PDIP package fits neatly into handheld plastic enclosures with through-hole mechanical anchors for drop-tested products.
Рекомендуется
Simple Sensor Interfaces & Data Acquisition Front Ends
The PIC16C55-10E/P serves as a low-cost front end for simple sensor interfaces - thermistor conditioning, photodiode pulse counting, or contact-debounce modules feeding an upstream host. Its 20 I/O accept digital sensor lines directly, while the integrated watchdog timer protects against sensor-bus lockups. OTP memory locks the calibration algorithm so identical units produce identical responses. The extended temperature grade enables outdoor sensor pods and industrial-environment mounting.
Рекомендуется
Educational Kits & Hobby Electronics Trainers
Educational microcontroller trainers and hobbyist kits favor the PIC16C55-10E/P because the 28-PDIP package is breadboard-friendly and hand-solderable. The 768-byte OTP memory is large enough for student projects (LED chasers, simple games, motor speed controllers) yet small enough to teach fundamental assembly programming. The PIC16C5X instruction set is straightforward, with only 33 instructions, making it a common choice for introductory embedded courses. The 20 I/O allow standard peripheral demonstrations: 7-segment LEDs, pushbuttons, and small DC motors.
Рекомендуется
Low-End Industrial Controllers & Replacement Logic
Low-end industrial controllers and legacy 5 V logic replacement modules use the PIC16C55-10E/P to consolidate discrete TTL/CMOS glue logic into a single programmable part. The extended -40 °C to +125 °C grade supports factory-floor environments, while the 20 mA I/O directly drive indicator lamps and small solenoids. The OTP memory locks the controller logic so plant operators cannot accidentally re-flash a critical process controller. The DIP package simplifies MRO (maintenance, repair, operations) socket replacement.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC16C55-10E/P — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC16C55-10I/P | PIC16C55-10/SP | PIC16C55-10E/SP | PIC16C55-10I/SP | PIC16C55-HSI/P |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-PDIP (0.600") | 28-PDIP (0.600") - same | 28-SPDIP (0.300") | 28-SPDIP (0.300") | 28-SPDIP (0.300") | 28-PDIP (0.600") - same |
| Max CPU Speed | 10 MHz | 10 MHz | 10 MHz | 10 MHz | 10 MHz | 20 MHz |
| Program Memory | 768 B (512 x 12) OTP | 768 B (512 x 12) OTP | 768 B (512 x 12) OTP | 768 B (512 x 12) OTP | 768 B (512 x 12) OTP | 768 B (512 x 12) OTP |
| RAM | 24 B | 24 B | 24 B | 24 B | 24 B | 24 B |
| I/O Pins | 20 | 20 | 20 | 20 | 20 | 20 |
| Operating Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Temperature Grade | Extended -40 to +125 °C | Industrial -40 to +85 °C | Commercial 0 to +70 °C | Extended -40 to +125 °C | Industrial -40 to +85 °C | Extended -40 to +125 °C |
Ключевые отличия
- Extended -40 °C to +125 °C temperature grade vs standard industrial -40 to +85 °C (против PIC16C55-10I/P)
- 768 B (512 x 12) of OTP program memory vs 512 B on PIC16C54 (против PIC16C54-10E/P)
- 20 mA I/O per pin direct drive eliminates external transistors (против PIC16F54-I/P)
Заметки по проектированию
The PIC16C55-10E/P requires a stable 4.5 V to 5.5 V supply; place a 100 nF ceramic decoupling capacitor as close as possible to the VDD pin (25) and a 10 µF bulk tantalum or aluminum electrolytic on the same rail. Decouple VSS (pins 5 and 14) with a low-impedance ground return. In noisy industrial environments, add a ferrite bead on the supply feed. Brown-out events below 4.5 V can corrupt OTP read cycles, so use a supervisor IC or rely on the internal POR with sufficient bulk capacitance to ride through transients.
Place the crystal or resonator within 10 mm of the OSC1 (pin 15) and OSC2 (pin 16) pins to minimize parasitic capacitance. Route the MCLR (pin 4) trace away from high-current switching signals and add a 10 kΩ pull-up to VDD plus a 100 nF cap to ground for hardware-reset debouncing. For the 28-PDIP (0.600") footprint, keep at least 2 mm of through-hole pad clearance on each side to accommodate hand-soldering or socketed replacement during prototyping.
Estimated: PIC16C55's OTP memory cannot be erased or rewritten - confirm firmware is final before programming the device. Lock bits and configuration words must be set correctly in the same programming cycle or the chip may lock up. The watchdog timer (WDT) is enabled by configuration and will reset the device at the end of its timeout if not cleared; ensure your main loop clears WDT regularly. The RTCC pin (pin 3) requires configuration as either an external timer input or a digital I/O - leaving it floating can cause spurious interrupts in noisy environments.
Информация о соответствии
RoHS and lead-free status for the PIC16C55-10E/P variant are not stated in the Verified Web Data. Microchip PIC16C5X family is generally supplied in lead-free / Pb-free finish for -E and -I grades, but verify with the manufacturer datasheet or a CoC before assembly into RoHS-restricted markets. AEC-Q100 does not apply to PIC16C5X OTP microcontrollers (consumer/industrial focus). REACH and halogen-free status also unknown from the data set.
