PIC16C662-20I/PT - 8-bit MCU, 7KB OTP, 33 I/O, 20MHz | Microchip
Артикул: PIC16C662-20I/PT ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $3.65 | $3,65 |
| 10 | $3.4 | $34,00 |
| 100 | $3.1 | $310,00 |
| 500 | $2.78 | $1.390,00 |
| 1.000 | $2.45 | $2.450,00 |
PIC16C662-20I/PT Обзор
The PIC16C662 belongs to the PIC16C6x mid-range MCU family, a class of 8-bit microcontrollers that combine a RISC instruction set with on-chip peripherals such as timers, capture/compare/PWM modules, and a synchronous serial port. The PIC architecture is a Harvard design with separate program and data buses, and the 'C' suffix indicates the OTP program-memory variant, suitable for low- to mid-volume production where mask-ROM economics do not apply. The 20 MHz maximum clock frequency gives roughly 5 MIPS of sustained instruction throughput, sufficient for control loops, simple communication stacks, and human-machine-interface tasks.
Key features include 8-bit data path, 14-bit instruction word, four 8-bit I/O ports, three timers, a USART, and a watchdog timer. Power consumption is a design strength of the PIC16C family, with typical active current below 10 mA at 5V/20 MHz and standby currents in the microamp range through the Sleep mode.
Typical applications include appliance control, industrial sensor interfaces, automotive body electronics (non-safety), consumer devices with keypad/LCD interfaces, and embedded control subsystems that need deterministic instruction timing. The wide I/O count (33) simplifies direct connection to keypads, LED/LCD panels, and parallel peripherals without external glue logic.
When designing with this part, use Microchip's MPLAB X IDE and a PIC programmer such as MPLAB PM3 or PICkit 3/4 for development. The '20I' suffix specifies 20 MHz operation and industrial temperature grade, distinguishing it from the '04' (4 MHz) and 'E' (extended temperature) siblings.
Аналоги без доработки для PIC16C662-20I/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC16C662-20I/PT (тот же форм-фактор и посадочное место) — отличается по Package, Program Memory Type, Watchdog Timer, Timers, Program Memory Size.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC16C662-20E/PT
✅ Прямая замена✓ В наличии
$8.2 / шт.
Открыть даташит →PIC16C662-20E/L
✅ Прямая замена✓ В наличии
$10.75 / шт.
Открыть даташит →PIC16C662-20/PQ
✅ Прямая замена✓ В наличии
$9.75 / шт.
Открыть даташит →PIC16C662-04I/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC16C662-10E/L
✅ Прямая замена✓ В наличии
$9.85 / шт.
Открыть даташит →PIC16C662-10/P
✅ Прямая замена✓ В наличии
$5.3 / шт.
Открыть даташит →PIC16C662-20I/PT Максимальные параметры и электрические характеристики
| Core Architecture | PIC16C6x (8-bit RISC, Harvard) |
| Program Memory Type | OTP (One-Time-Programmable EPROM) |
| Program Memory Size | 7 KB |
| RAM Size | 176 bytes |
| Максимальная тактовая частота | 20 MHz |
| Instruction Throughput | Approx. 5 MIPS at 20 MHz |
| I/O Pins | 33 |
| Supply Voltage (Vdd) | 4.0 V to 6.0 V (5 V typical) |
| Рабочая температура | -40C to +85C (industrial) |
| Корпус | 44-pin TQFP (PT) |
| Тип монтажа | Surface Mount |
| Number of Timers | 3 (TMR0, TMR1, TMR2) |
| Communication Peripherals | USART (SCI/SPI modes), PSP |
| ADC | None (digital I/O only) |
| Watchdog Timer | Yes |
Конфигурация выводов PIC16C662-20I/PT
| Контакт 1 | NC — Not connected on this package variant |
| Контакт 2 | RA0/AN0 — Port A bit 0 / analog comparator input |
| Контакт 3 | RA1/AN1 — Port A bit 1 / analog comparator input |
| Контакт 4 | RA2/AN2 — Port A bit 2 / analog comparator input |
| Контакт 5 | RA3/AN3/VREF — Port A bit 3 / analog comparator input / voltage reference |
| Контакт 6 | RA4/T0CKI — Port A bit 4 / Timer0 clock input |
| Контакт 7 | RA5/SS/AN4 — Port A bit 5 / SPI slave select / analog input |
| Контакт 8 | Vss — Ground reference |
| Контакт 9 | OSC1/CLKIN — Crystal oscillator input / external clock input |
| Контакт 10 | OSC2/CLKOUT — Crystal oscillator output / clock output |
| Контакт 11 | RC0/T1OSO/T1CKI — Port C bit 0 / Timer1 oscillator output / Timer1 clock input |
| Контакт 12 | RC1/T1OSI/CCP2 — Port C bit 1 / Timer1 oscillator input / Capture-Compare-PWM 2 |
| Контакт 13 | RC2/CCP1 — Port C bit 2 / Capture-Compare-PWM 1 |
| Контакт 14 | RC3/SCK/SCL — Port C bit 3 / SPI clock / I2C clock |
| Контакт 15 | RD0/PSP0 — Port D bit 0 / Parallel Slave Port bit 0 |
| Контакт 16 | RD1/PSP1 — Port D bit 1 / Parallel Slave Port bit 1 |
| Контакт 17 | RD2/PSP2 — Port D bit 2 / Parallel Slave Port bit 2 |
| Контакт 18 | RD3/PSP3 — Port D bit 3 / Parallel Slave Port bit 3 |
| Контакт 19 | RC4/SDI/SDA — Port C bit 4 / SPI data in / I2C data |
| Контакт 20 | RC5/SDO — Port C bit 5 / SPI data out |
| Контакт 21 | RC6/TX/CK — Port C bit 6 / USART TX / USART clock |
| Контакт 22 | RC7/RX/DT — Port C bit 7 / USART RX / USART data |
| Контакт 23 | RD4/PSP4 — Port D bit 4 / Parallel Slave Port bit 4 |
| Контакт 24 | RD5/PSP5 — Port D bit 5 / Parallel Slave Port bit 5 |
| Контакт 25 | RD6/PSP6 — Port D bit 6 / Parallel Slave Port bit 6 |
| Контакт 26 | RD7/PSP7 — Port D bit 7 / Parallel Slave Port bit 7 |
| Контакт 27 | Vss — Ground reference |
| Контакт 28 | Vdd — Positive supply (5 V typical) |
| Контакт 29 | RB0/INT — Port B bit 0 / external interrupt |
| Контакт 30 | RB1 — Port B bit 1 |
| Контакт 31 | RB2 — Port B bit 2 |
| Контакт 32 | RB3 — Port B bit 3 |
| Контакт 33 | RB4 — Port B bit 4 |
| Контакт 34 | RB5 — Port B bit 5 |
| Контакт 35 | RB6/PGC — Port B bit 6 / ICSP clock |
| Контакт 36 | RB7/PGD — Port B bit 7 / ICSP data |
| Контакт 37 | RE0/RD/AN5 — Port E bit 0 / read control / analog input |
| Контакт 38 | RE1/WR/AN6 — Port E bit 1 / write control / analog input |
| Контакт 39 | RE2/CS/AN7 — Port E bit 2 / chip select / analog input |
| Контакт 40 | Vdd — Positive supply (5 V typical) |
| Контакт 41 | Vss — Ground reference |
| Контакт 42 | NC — Not connected on this package variant |
| Контакт 43 | NC — Not connected on this package variant |
| Контакт 44 | MCLR/Vpp — Master clear reset / programming voltage input |
Типичное применение
PIC16C662-20I/PT подходит для 7 применениеs: Appliance Control Boards, Industrial Sensor Interface, Consumer Electronics Keypad Controller, Automotive Body Electronics (Non-Safety), Security and Access Control Panels, Embedded Control Subsystems (Fan/Compressor/Pump), Educational and Hobby Embedded Projects.
Appliance Control Boards
The PIC16C662-20I/PT is well-suited to appliance control boards such as washing machines, dishwashers, and microwave ovens, where its 33 digital I/O pins can directly drive keypads, LED indicators, relay drivers, and seven-segment displays without external expanders. The 20 MHz clock provides the throughput needed for finite state machines governing wash cycles, sensor polling, and user-interface debouncing. Its industrial temperature grade (-40C to +85C) handles kitchen and laundry environments. The Harvard RISC architecture gives deterministic instruction timing critical for UL/IEC safety-state machines in appliance firmware.
Рекомендуется
Industrial Sensor Interface
In industrial sensor hubs, the PIC16C662-20I/PT acts as a digital pre-processor that aggregates inputs from limit switches, encoders, and discrete sensors, then relays processed data to a host controller over its USART. With 33 I/O available, multiple digital sensors can be polled in parallel and time-stamped at 200 ns instruction-cycle granularity. The on-chip timers (TMR0/1/2) provide capture and PWM generation for speed and position sensing. Industrial temperature range supports factory-floor deployment, and the OTP program memory protects firmware IP in field-deployed units.
Рекомендуется
Consumer Electronics Keypad Controller
The PIC16C662-20I/PT serves as a low-cost keypad and front-panel controller in consumer electronics such as audio amplifiers, set-top boxes, and remote-base stations. Its 33 I/O drive scan matrices for 4x4 or 5x5 keypads plus LCD or VFD displays without external logic. The PIC16C6x instruction set supports efficient BCD math for timer-clock displays and channel numbering. Low Sleep current (sub-microamp typical) suits battery-backed remote controls, and the OTP program memory prevents casual firmware cloning by competitors.
Рекомендуется
Automotive Body Electronics (Non-Safety)
Non-safety automotive subsystems such as interior lighting controllers, seat-position memory, and mirror-adjust modules can leverage the PIC16C662-20I/PT. Its industrial temperature grade covers cabin environments, and the wide I/O count simplifies driving multiple LEDs, Hall-effect sensors, and brushed DC motor bridges. The deterministic interrupt latency of the PIC16C6x core is suitable for motor-control loops when paired with PWM firmware. For safety-critical functions, designers should select an AEC-Q100 qualified MCU instead.
Рекомендуется
Security and Access Control Panels
Security alarm panels and access-control readers benefit from the PIC16C662-20I/PT's 33 I/O for keypad scanning, reed-switch inputs, buzzer output, and relay control of magnetic locks. The PIC16C6x core's small instruction footprint allows efficient implementation of PIN verification routines, anti-tamper debounce logic, and event-logging to external EEPROM via I2C bit-banging. OTP memory secures the firmware against unauthorized duplication. Industrial temperature tolerance supports garage-door and outdoor-mount installations.
Рекомендуется
Embedded Control Subsystems (Fan/Compressor/Pump)
The PIC16C662-20I/PT can orchestrate fixed-speed fan, compressor, or pump subsystems where PID loops run at modest rates. Capture inputs read tachometer pulses from fans or flow sensors, and PWM outputs drive FET gates for variable-speed operation. The three on-chip timers (TMR0/1/2) and the USART support both the control loop and the supervisory link to a host BMS. Low Sleep current extends battery backup time for power-failure telemetry in HVAC and refrigeration equipment.
Рекомендуется
Educational and Hobby Embedded Projects
Hobbyists, makers, and university embedded-systems courses use the PIC16C662-20I/PT as a teaching platform for assembly and C programming on the PIC16C6x architecture. Its 33 I/O, USART, and timer resources give students exposure to interrupts, peripheral configuration, and real-time scheduling. The OTP limitation reinforces lessons about code-quality discipline (no field re-programming). Compatible development tools include MPLAB X IDE, XC8 compiler, and PICkit 3/4 debuggers, plus low-cost breakout boards that expose all 44 pins on 0.1-inch headers.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC16C662-20I/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC16C662-20E/PT | PIC16C662-04I/PT | PIC16C662-20/PQ | PIC16F747-I/PT |
|---|---|---|---|---|---|
| Package | 44-pin TQFP (PT) | 44-pin TQFP (PT) - same | 44-pin TQFP (PT) - same | 44-pin TQFP (PT) - same | 44-pin TQFP (PT) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Program Memory | 7 KB OTP | 7 KB OTP - same | 7 KB OTP - same | 7 KB OTP - same | 7 KB Flash (reprogrammable) |
| Max Clock Frequency | 20 MHz | 20 MHz - same | 4 MHz | 20 MHz - same | 20 MHz - same |
| RAM Size | 176 bytes | 176 bytes - same | 176 bytes - same | 176 bytes - same | 192 bytes |
| I/O Pins | 33 | 33 - same | 33 - same | 33 - same | 36 (3 additional on PORTE) |
| Operating Temperature | -40C to +85C (industrial) | -40C to +125C (extended) | -40C to +85C (industrial) - same | 0C to +70C (commercial) | -40C to +85C (industrial) - same |
| ADC | None (analog comparator only) | None - same | None - same | None - same | 10-bit, 14-channel |
| Programmability | One-Time Programmable (OTP) | OTP - same | OTP - same | OTP - same | Flash (in-circuit reprogrammable) |
| Unit Price (qty-1, as of 2026-09-18) | $3.65 | Higher (extended temp grade premium) | Lower (4 MHz speed grade) | Lower (commercial temp grade) | Higher (flash + ADC integration) |
Ключевые отличия
- Highest speed grade in the PIC16C662-20x family at 20 MHz (против PIC16C662-04I/PT)
- Industrial temperature grade (-40C to +85C) coverage (против PIC16C662-20/PQ)
- Lower unit cost than flash-based PIC16F alternatives (против PIC16F747-I/PT)
- Wide 33-pin I/O count in a 44-pin TQFP (против PIC16C66-20I/SP)
Заметки по проектированию
The PIC16C662-20I/PT operates from a single 5 V supply (4.0V to 6.0V range). Decouple Vdd/Vss pairs with a 100 nF ceramic capacitor placed within 5 mm of each Vdd pin, plus a 10 uF bulk capacitor near the IC. Multiple Vdd/Vss pins exist on the 44-pin TQFP; connect each to the supply plane to ensure adequate current delivery and reduce digital switching noise coupling into the analog comparator inputs. A bulk reservoir of 47 uF at the board input is recommended when the IC shares its rail with relays or other inductive loads.
Because the PIC16C662-20I/PT uses one-time-programmable (OTP) EPROM, code must be fully verified before programming - there is no second chance. Use MPLAB simulator and PICkit 3/4 in-circuit debug emulation with a flash-equipped PIC16F sibling (such as PIC16F747-I/PT) to validate firmware on the same PCB, then commit the final hex to the OTP device on production boards. The MCLR pin must see a valid rising edge at power-up; tie MCLR to Vdd through a 10 kohm pull-up and place a 100 nF capacitor to Vdd for brown-out reset compliance.
Place the 20 MHz crystal or resonator within 10 mm of the OSC1/OSC2 pins and guard the traces with a ground pour to minimize radiated EMI. Keep the high-speed digital I/O (port C USART, port D PSP) traces short and route them away from analog comparator inputs on port A. The 44-pin TQFP exposed thermal pad (if present) should be soldered to a copper pour on the PCB for mechanical stability, even though the PIC16C662 dissipates well under 100 mW in typical applications.
The PIC16C662-20I/PT's USART supports both asynchronous SCI and synchronous SPI modes; verify baud-rate register values against the Fosc tolerance. At 20 MHz Fosc the USART BRGH=1 mode can achieve up to 2.5 Mbaud with less than 1% error using commonly available crystal values. For RS-485 networking, add external fail-safe biasing resistors (typically 4.7 kohm to Vdd and 4.7 kohm to Vss on the RX line) because the on-chip USART does not include internal biasing.
Информация о соответствии
Compliance status not present in the verified distributor data captured on 2026-09-18. The 44-pin TQFP (PT) finish may be supplied as lead-free or SnPb depending on reel stock; request a compliance certificate from the franchised distributor before placing volume orders. AEC-Q100 qualification not documented for this OTP industrial part - choose an automotive-qualified MCU for safety-critical automotive applications.