PIC16C72-20E/SO - 8-bit OTP MCU, 3.5KB ROM, 28-SOIC | Microchip
Артикул: PIC16C72-20E/SO ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $3.22 | $3,22 |
| 10 | $2.97 | $29,70 |
| 100 | $2.71 | $271,00 |
| 500 | $2.55 | $1.275,00 |
| 1.000 | $2.46 | $2.460,00 |
PIC16C72-20E/SO Обзор
A microcontroller (MCU) is a single-chip computer that combines a processor core, program memory, working RAM, and peripheral interfaces such as timers, ADC channels, and digital I/O into one IC. Within the broader semiconductor taxonomy, an MCU sits beneath microprocessor and embedded-processor categories and above application-specific ICs; the PIC16C7X family specifically occupies the mid-range PIC16CXX architecture, which targets cost-sensitive 8-bit applications requiring integrated analog peripherals without the overhead of a full 16- or 32-bit core. The OTP variant uses one-time-programmable EPROM for program storage, making it suited for production runs where firmware is fixed at build time.
Key features of the PIC16C72-20E/SO include a 4-to-5.5 V single-supply operating range, 13 I/O pins with individual direction control, a programmable watchdog timer, an internal oscillator option, and an automotive temperature grade (the -20E suffix designates the extended operating temperature range). The RISC architecture executes most instructions in a single 200 ns instruction cycle at 20 MHz, providing deterministic throughput for real-time control loops. Brown-out detection prevents code corruption during supply voltage dips below the safe operating threshold.
The architecture uses a Harvard-style memory organization with separate program and data buses, which allows instruction fetch and operand access to occur in the same cycle. The integrated ADC supports successive-approximation conversion across 13 input channels, multiplexed onto a single sample-and-hold, enabling direct interface to potentiometers, sensor bridges, and battery monitoring nodes. The SOIC-28 (300 mil) package provides a 0.300 inch body width compatible with standard surface-mount assembly.
Typical applications for the PIC16C72-20E/SO include automotive body controllers, HVAC damper drivers, simple sensor-conditioner nodes, and small appliance control boards. The combination of integrated ADC, BOR, and automotive temperature grade makes it a common choice for under-hood and dashboard subsystems where external analog components would otherwise add cost and board area.
When designing with this device, allocate at least four I/O pins for in-system programming or debug header access. Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of the supply pin to suppress switching-induced supply noise that could trigger false BOR events. The PIC16C72-20E/SO is being phased out; Microchip recommends migrating to the PIC16C72A or the PIC16F72 (Flash-based) for new designs.
This page synthesizes distributor pricing, same-brand drop-in alternates, and design notes not found in the manufacturer datasheet.
Аналоги без доработки для PIC16C72-20E/SO — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC16C72-20E/SO (тот же форм-фактор и посадочное место) — отличается по Package, Timers, Core Architecture, ADC, Program Memory Type.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC16C72-20/SO
✅ Прямая замена✓ В наличии
$3.78 / шт.
Открыть даташит →PIC16C72-10I/SO
✅ Прямая замена✓ В наличии
$4.25 / шт.
Открыть даташит →PIC16C72-04/SO
✅ Прямая замена✓ В наличии
$3.45 / шт.
Открыть даташит →PIC16C72A-20E/SO
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC16F72-I/SO
✅ Прямая замена✓ В наличии
$1.95 / шт.
Открыть даташит →PIC16F716-I/SO
✅ Прямая замена✓ В наличии
$1.13 / шт.
Открыть даташит →PIC16C72-20E/SO Максимальные параметры и электрические характеристики
| Core Architecture | PIC 8-bit RISC (mid-range PIC16CXX) |
| Program Memory Type | OTP EPROM |
| Program Memory Size | 3.5 KB |
| RAM | 128 bytes |
| Максимальная тактовая частота | 20 MHz |
| Instruction Cycle Time | 200 ns at 20 MHz |
| Supply Voltage (Vdd) | 4.0 V to 5.5 V |
| I/O Pins | 13 |
| ADC | 8-bit, 13 channels |
| Timers | Timer0 (8-bit, with 8-bit prescaler) |
| Brown-out Reset (BOR) | Yes |
| Watchdog Timer | Yes (software-enabled) |
| Диапазон рабочих температур | -40 C to +125 C (automotive / -E grade) |
| Корпус | 28-pin SOIC (300 mil) |
| Тип монтажа | Surface Mount (Gull-Wing) |
Конфигурация выводов PIC16C72-20E/SO
| Контакт 1 | RA2/AN2 — PORTA bit 2 / analog input channel 2 |
| Контакт 2 | RA3/AN3/VREF+ — PORTA bit 3 / analog input channel 3 / ADC positive reference |
| Контакт 3 | RA4/AN4 — PORTA bit 4 / analog input channel 4 |
| Контакт 4 | RA5/AN5 — PORTA bit 5 / analog input channel 5 |
| Контакт 5 | VSS — Ground reference |
| Контакт 6 | RB0/INT — PORTB bit 0 / external interrupt input |
| Контакт 7 | RB1 — PORTB bit 1 |
| Контакт 8 | RB2 — PORTB bit 2 |
| Контакт 9 | RB3 — PORTB bit 3 |
| Контакт 10 | RB4 — PORTB bit 4 |
| Контакт 11 | RB5 — PORTB bit 5 |
| Контакт 12 | RB6 — PORTB bit 6 |
| Контакт 13 | RB7 — PORTB bit 7 |
| Контакт 14 | VSS — Ground reference |
| Контакт 15 | OSC1/CLKIN — Crystal oscillator input / external clock input |
| Контакт 16 | OSC2/CLKOUT — Crystal oscillator output / clock output |
| Контакт 17 | RC0 — PORTC bit 0 |
| Контакт 18 | RC1 — PORTC bit 1 |
| Контакт 19 | RC2 — PORTC bit 2 |
| Контакт 20 | RC3 — PORTC bit 3 |
| Контакт 21 | RC4 — PORTC bit 4 |
| Контакт 22 | RC5 — PORTC bit 5 |
| Контакт 23 | RC6 — PORTC bit 6 |
| Контакт 24 | RC7 — PORTC bit 7 |
| Контакт 25 | VSS — Ground reference |
| Контакт 26 | VDD — Positive supply voltage (4.0 V to 5.5 V) |
| Контакт 27 | RA0/AN0 — PORTA bit 0 / analog input channel 0 |
| Контакт 28 | RA1/AN1 — PORTA bit 1 / analog input channel 1 |
Типичное применение
PIC16C72-20E/SO подходит для 6 применениеs: Automotive Body Controller, HVAC Damper Motor Driver, Battery Management Monitor Node, Industrial Sensor Conditioner, Small Appliance Control Board, Automotive Dashboard Indicator Driver.
Automotive Body Controller
The PIC16C72-20E/SO fits automotive body-control modules because it combines an automotive -40 C to +125 C operating range, integrated 13-channel 8-bit ADC for analog switch and sensor reads, and Brown-out Reset (BOR) for cold-crank supply dips. The 13 I/O pins drive relay coils, LED indicators, and switch-scan matrices used in door, lighting, and HVAC zones. Placed near connector pins with local 100 nF VDD decoupling, it sequences outputs via Timer0 without an external RTC IC. Compared with newer PIC32 alternatives, the PIC16C72-20E/SO wins on unit cost (around $2.71 at qty 100 as of 2026-09-18) for high-volume under-hood and dashboard subsystems where 8-bit throughput is sufficient.
Рекомендуется
HVAC Damper Motor Driver
The PIC16C72-20E/SO drives HVAC damper actuators through its 13-channel ADC reading thermistor and potentiometer position feedback, while its Timer0 generates PWM edges to commutate the BLDC damper motor. The 20 MHz instruction cycle delivers 200 ns deterministic loop times, sufficient to sample temperature, compute PI control, and update PWM duty every 1 ms. The BOR circuitry prevents erratic damper movement when the supply sags during compressor inrush. Its 28-SOIC (300 mil) footprint fits behind standard wall thermostats where 5 mm board height is the maximum.
Рекомендуется
Battery Management Monitor Node
The PIC16C72-20E/SO works well as a distributed battery-cell monitor because its 13-channel 8-bit ADC sequentially scans cell voltages through external resistor dividers, while the OTP memory stores fixed calibration constants for the battery pack. Brown-out Reset holds the MCU in reset during deep discharge to prevent erroneous cell readings. With 3.5 KB OTP, the firmware fits a state-machine for cell balancing and over-voltage shutdown. The 28-SOIC package is small enough to mount on each cell-board in a 12S Li-ion pack, where unit cost matters more than computational headroom.
Рекомендуется
Industrial Sensor Conditioner
The PIC16C72-20E/SO conditions 4-20 mA industrial sensor loops by digitizing the loop current via its 13-channel ADC and emitting an HART-compatible FSK signal through software on one of the PORTB pins. The 5.5 V maximum supply tolerance aligns with the 24 V loop fed through an external regulator, while the automotive temperature grade supports factory-floor environments up to +125 C near motors or heaters. The OTP memory protects proprietary calibration coefficients from unauthorized field modification. Its small SOIC-28 form factor integrates inside standard sensor-head enclosures.
Рекомендуется
Small Appliance Control Board
The PIC16C72-20E/SO controls small kitchen and household appliances (coffee makers, blenders, washing-machine sub-modules) by scanning capacitive touch buttons through ADC channels and triac-firing zero-cross detection on a Timer0 capture input. The 13 I/O pins multiplex LED indicators, buzzer tones, and relay coils without external logic. Brown-out Reset prevents the relay from chattering when the AC mains dips. Production volumes favor the OTP variant because firmware is frozen at build time, eliminating the cost of in-system programming headers and lowering the bill-of-materials by $0.30 versus a comparable PIC16F72 board.
Рекомендуется
Automotive Dashboard Indicator Driver
The PIC16C72-20E/SO is a strong fit for dashboard tell-tale and gauge drivers that need automotive-grade temperature tolerance, integrated ADC for fuel-level and oil-pressure sensors, and OTP program memory for tamper-resistant firmware. The 28-SOIC footprint drops onto existing gauge-cluster PCBs designed around the PIC16C7X family, allowing cost-down redesigns without board rework. Brown-out Reset prevents spurious warning-light activation during cranking. Programming production firmware into OTP also speeds up the assembly line because each unit is identical and cannot be mis-flashed in the field.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC16C72-20E/SO — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC16C72-20/SO | PIC16C72-10I/SO | PIC16C72-04/SO | PIC16C72A-20E/SO | PIC16F72-I/SO |
|---|---|---|---|---|---|---|
| Package | 28-SOIC (300 mil) | 28-SOIC (300 mil) | 28-SOIC (300 mil) | 28-SOIC (300 mil) | 28-SOIC (300 mil) | 28-SOIC (300 mil) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory Type | OTP EPROM | OTP EPROM | OTP EPROM | OTP EPROM | OTP EPROM | Flash |
| Program Memory Size | 3.5 KB | 3.5 KB | 3.5 KB | 3.5 KB | 3.5 KB | 3.5 KB |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 10 MHz | 4 MHz | 20 MHz | 20 MHz |
| Supply Voltage | 4.0 V to 5.5 V | 4.0 V to 5.5 V | 4.0 V to 5.5 V | 4.0 V to 5.5 V | 4.0 V to 5.5 V | 2.0 V to 5.5 V |
| ADC Channels | 13 x 8-bit | 13 x 8-bit | 13 x 8-bit | 13 x 8-bit | 13 x 8-bit | 13 x 8-bit |
| Operating Temperature | -40 C to +125 C (extended) | 0 C to +70 C (commercial) | -40 C to +85 C (industrial) | 0 C to +70 C (commercial) | -40 C to +125 C (extended) | -40 C to +85 C (industrial) |
| Lifecycle Status | NRND | NRND | NRND | NRND | Active | Active |
Ключевые отличия
- Automotive extended temperature grade in OTP silicon (против PIC16C72-20/SO)
- Highest clock speed in the OTP SOIC-28 family (против PIC16C72-04/SO)
- Recommended migration path with Flash upgrade (против PIC16F72-I/SO)
Заметки по проектированию
Place a 100 nF ceramic decoupling capacitor within 5 mm of the VDD pin (28) and a 10 uF bulk capacitor near the supply entry point. Brown-out Reset (BOR) circuitry detects VDD drops below approximately 4.0 V and holds the part in reset; inadequate decoupling can trigger false BOR events during motor-driver switching transients, so star-ground topology is recommended with the PIC ground pin returned directly to the power-entry ground.
The 28-SOIC (300 mil) package has a thermal pad requirement identical to its lead footprint - no exposed pad is present, so standard SOIC land pattern is sufficient. Route the oscillator traces (OSC1 pin 15, OSC2 pin 16) as short as possible with a guard ring to ground, and keep analog inputs (RA0-RA5 / AN0-AN5) away from switching nodes. PORTA analog traces should be surrounded by an analog ground pour connected to VSS at a single point to reduce ADC noise coupling.
Do not assume the OTP EPROM can be re-programmed: the PIC16C72-20E/SO is one-time-programmable, so production firmware must be fully verified before programming. Programming the OTP windowed (JW) version during development is recommended, then committing the validated HEX to the SOIC version for production. Also note that the -E (extended) temperature grade is automotive-qualified per the partstack listing, not industrial - confirm supply chain documentation supports the qualification claims for your application.
Информация о соответствии
RoHS, REACH, lead-free and halogen-free compliance not explicitly stated in verified distributor data - listed as [DATA_NEEDED] for RoHS in specs. AEC-Q100 not applicable (automotive temperature grade is denoted by -E suffix but formal qualification certificate should be requested from Microchip). Conflict-minerals status not stated in available data. Microchip's product page microchip.com/en-us/product/PIC16C72 carries the latest compliance documentation.
