PIC16C74BT-04E/PQ - 8-Bit 4MHz OTP MCU 7KB Flash 44-MQFP
Артикул: PIC16C74BT-04E/PQ ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.2 | $112,00 |
| 100 | $9.85 | $985,00 |
| 500 | $8.75 | $4.375,00 |
| 1.000 | $7.9 | $7.900,00 |
PIC16C74BT-04E/PQ Обзор
An 8-bit microcontroller (MCU) is a single-chip computer that integrates an 8-bit CPU core, program memory, working RAM, and peripherals such as timers, communication interfaces, and analog-to-digital converters into one IC. Within the broader semiconductor hierarchy, MCUs belong to the microcontroller -> embedded controller -> semiconductor device taxonomy. The PIC16CXX mid-range family sits between Microchip's baseline PIC10/PIC12/PIC16C5X and enhanced PIC17/PIC18 families, targeting applications that need more peripherals and code space than baseline parts while staying in a compact footprint.
Key features of the PIC16C74BT-04E/PQ include Brown-out Reset (BOR) and Power-on Reset (POR) for robust supply start-up, an internal/external oscillator selection, an ICD-friendly in-circuit debug capability, and a wide 5V operating supply. The OTP memory allows one-time programming of the application code - lower unit cost than UV-EPROM or windowed parts, but the device cannot be erased and reprogrammed.
Architecturally, the PIC16C74B uses a 14-bit instruction word, separate program and data buses (Harvard architecture), and a fully-static design so the clock can be stopped for power saving. The 4MHz input oscillator combined with a 4-cycle-per-instruction pipeline yields 1 MIPS of processing throughput, which is sufficient for control loops, simple user interfaces, and slow serial communication.
Typical applications for the PIC16C74BT-04E/PQ include industrial motor control, sensor signal conditioning, low-speed data acquisition, appliance control boards, and embedded user-interface controllers. Its small footprint and integrated ADC reduce bill-of-materials cost in space-constrained designs.
When designing with this part, confirm that 5V supply tolerance matches downstream peripherals and that the chosen oscillator components meet the 4MHz spec across the full operating temperature range. Designers should plan firmware carefully because OTP parts cannot be re-flashed during field service.
This page synthesizes distributor pricing, drop-in Microchip same-family alternatives, and practical design notes not found in the manufacturer datasheet.
Аналоги без доработки для PIC16C74BT-04E/PQ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC16C74BT-04E/PQ (тот же форм-фактор и посадочное место) — отличается по Core Architecture, ADC, Timers, Package, Program Memory Size.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC16C74B-04E/PQ
✅ Прямая замена✓ В наличии
$9.95 / шт.
Открыть даташит →PIC16C74BT-04/PQ
✅ Прямая замена✓ В наличии
$5.6 / шт.
Открыть даташит →PIC16C74B-04/PQ
✅ Прямая замена✓ В наличии
$7.25 / шт.
Открыть даташит →PIC16C74B-04I/P
✅ Прямая замена✓ В наличии
$5.55 / шт.
Открыть даташит →PIC16C74A-04E/PQ
✅ Прямая замена✓ В наличии
$6.2 / шт.
Открыть даташит →PIC16C74A-04/PQ
✅ Прямая замена✓ В наличии
$5.8 / шт.
Открыть даташит →PIC16C74AT-20I/PQ
✅ Прямая замена✓ В наличии
$7.1 / шт.
Открыть даташит →PIC16C74AT-10I/PQ
✅ Прямая замена✓ В наличии
$5.8 / шт.
Открыть даташит →PIC16C74BT-04E/PQ Максимальные параметры и электрические характеристики
| Core | PIC 8-bit |
| Program Memory Size | 7 KB (4K x 14) OTP |
| RAM Size | 192 x 8 bytes |
| Максимальная тактовая частота | 4 MHz |
| Number of I/O Pins | 33 |
| Корпус / Типоразмер | 44-MQFP (10x10 mm) |
| Тип монтажа | Surface Mount |
| ADC | 8-channel, 8-bit |
| Communication Interfaces | I2C, SPI, UART/USART |
| Oscillator Type | External |
| Напряжение питания | 5 V |
| Рабочая температура | -40C to +125C (E suffix = extended) |
| Instruction Set Architecture | Harvard, 14-bit instruction word |
| Program Memory Type | OTP (One-Time Programmable) |
| Packaging | Tape & Reel (TR) |
| Статус RoHS | unknown |
| Architecture Family | PIC16CXX mid-range |
Конфигурация выводов PIC16C74BT-04E/PQ
| Контакт 1 | MCLR/VPP — Master Clear (Reset) input / Programming voltage |
| Контакт 2 | OSC1/CLKIN — External clock input / Crystal oscillator pin 1 |
| Контакт 3 | OSC2/CLKOUT — Oscillator output / Clock out (4x fosc) |
| Контакт 4 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| Контакт 5 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| Контакт 6 | RA2/AN2 — PORTA bit 2 / Analog input 2 |
| Контакт 7 | RA3/AN3/VREF — PORTA bit 3 / Analog input 3 / ADC reference |
| Контакт 8 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| Контакт 9 | RA5/AN4/SS — PORTA bit 5 / Analog input 4 / SPI slave select |
| Контакт 10 | VSS — Ground reference |
| Контакт 11 | VDD — Positive supply (5V) |
| Контакт 12 | RB0/INT — PORTB bit 0 / External interrupt |
| Контакт 13 | RB1 — PORTB bit 1 |
| Контакт 14 | RB2 — PORTB bit 2 |
| Контакт 15 | RB3/PGM — PORTB bit 3 / Low-voltage programming |
| Контакт 16 | RB4 — PORTB bit 4 |
| Контакт 17 | RB5 — PORTB bit 5 |
| Контакт 18 | RB6/PGC — PORTB bit 6 / ICD clock |
| Контакт 19 | RB7/PGD — PORTB bit 7 / ICD data |
| Контакт 20 | VSS — Ground reference |
| Контакт 21 | VDD — Positive supply (5V) |
| Контакт 22 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator out / clock in |
| Контакт 23 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator in / CCP2 |
| Контакт 24 | RC2/CCP1 — PORTC bit 2 / Capture/Compare/PWM1 |
| Контакт 25 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| Контакт 26 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| Контакт 27 | RC5/SDO — PORTC bit 5 / SPI data out |
| Контакт 28 | RC6/TX/CK — PORTC bit 6 / USART TX / clock |
| Контакт 29 | RC7/RX/DT — PORTC bit 7 / USART RX / data |
| Контакт 30 | VSS — Ground reference |
| Контакт 31 | VDD — Positive supply (5V) |
| Контакт 32 | RD0 — PORTD bit 0 |
| Контакт 33 | RD1 — PORTD bit 1 |
| Контакт 34 | RD2 — PORTD bit 2 |
| Контакт 35 | RD3 — PORTD bit 3 |
| Контакт 36 | RD4 — PORTD bit 4 |
| Контакт 37 | RD5 — PORTD bit 5 |
| Контакт 38 | RD6 — PORTD bit 6 |
| Контакт 39 | RD7 — PORTD bit 7 |
| Контакт 40 | VSS — Ground reference |
| Контакт 41 | VDD — Positive supply (5V) |
| Контакт 42 | RE0/RD/AN5 — PORTE bit 0 / Read control / Analog input 5 |
| Контакт 43 | RE1/WR/AN6 — PORTE bit 1 / Write control / Analog input 6 |
| Контакт 44 | RE2/CS/AN7 — PORTE bit 2 / Chip select / Analog input 7 |
Типичное применение
PIC16C74BT-04E/PQ подходит для 6 применениеs: Industrial Motor Control Board, Sensor Signal Conditioning Hub, Appliance Control Board (White Goods), Low-Speed Data Acquisition Module, Embedded User-Interface Controller, Automotive Body Electronics (Legacy).
Industrial Motor Control Board
The PIC16C74BT-04E/PQ fits industrial motor-control daughter boards where its 8-channel 8-bit ADC digitizes current-sensor and back-EMF feedback, while the on-chip UART/SPI links to a host PLC or display. The 33 I/O lines handle direction-control GPIO, brake outputs, and fault flags. Compared with a discrete logic solution, the integrated MCU reduces BOM by 30% and consolidates the commutation loop into firmware.
Рекомендуется
Sensor Signal Conditioning Hub
Sensor hubs aggregating thermocouple, RTD, or bridge-pressure signals benefit from the PIC16C74BT-04E/PQ's 8-channel ADC and 33 GPIO. The Harvard architecture and 4MHz clock support 1 MIPS throughput, sufficient for oversampling averaging and linearization routines. The extended -40C to +125C range handles plant-floor environments without derating.
Рекомендуется
Appliance Control Board (White Goods)
Washing-machine, dishwasher, and oven controllers traditionally use PIC16C mid-range MCUs for relay drivers, keypad scan, and LCD interface. The PIC16C74BT-04E/PQ offers 33 I/O for 7-segment displays plus 8-channel ADC for temperature and water-level sensing. OTP programming lowers unit cost versus flash parts in high-volume appliance production.
Рекомендуется
Low-Speed Data Acquisition Module
Multi-channel analog front ends digitizing 0-5V transducer signals use the PIC16C74BT-04E/PQ's 8-channel 8-bit ADC to capture sensor data and forward it over UART or SPI to a host logger. The Harvard architecture provides deterministic interrupt latency for sampled-data pipelines. The 5V supply rail aligns with industrial 24V->5V buck converters.
Рекомендуется
Embedded User-Interface Controller
Front-panel keypads, LED/LCD indicators, and rotary-encoder inputs map cleanly to the PIC16C74BT-04E/PQ's 33 GPIO. The integrated I2C/SPI peripherals drive character LCDs or capacitive-touch front-ends. With the 'E' temperature rating, the same part serves both indoor and outdoor kiosks.
Рекомендуется
Automotive Body Electronics (Legacy)
Pre-CAN-era body controllers (lamp drivers, mirror controls, simple wiper logic) used PIC16C74B-family MCUs. The PIC16C74BT-04E/PQ's -40C to +125C rating covers under-hood and cabin environments. Although newer designs use PIC18 or dsPIC, the legacy design base keeps demand for this part in aftermarket rebuilds.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC16C74BT-04E/PQ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC16C74B-04E/PQ | PIC16C74BT-04/PQ | PIC16C74B-04/PQ | PIC16C74A-04E/PQ | PIC16C74AT-20I/PQ |
|---|---|---|---|---|---|---|
| Package | 44-MQFP (10x10 mm) | 44-MQFP (10x10 mm) | 44-MQFP (10x10 mm) | 44-MQFP (10x10 mm) | 44-MQFP (10x10 mm) | 44-MQFP (10x10 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | 8-bit PIC | 8-bit PIC | 8-bit PIC | 8-bit PIC | 8-bit PIC | 8-bit PIC |
| Max Clock Frequency | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 20 MHz |
| Program Memory | 7 KB OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP |
| RAM Size | 192 bytes | 192 bytes | 192 bytes | 192 bytes | 192 bytes | 192 bytes |
| I/O Pins | 33 | 33 | 33 | 33 | 33 | 33 |
| Operating Temperature | -40C to +125C (E) | -40C to +125C (E) | 0C to +70C | 0C to +70C | -40C to +125C (E) | -40C to +85C (I) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Ключевые отличия
- Same die across 04/04E temperature grades (против PIC16C74BT-04/PQ)
- Tape-and-reel packaging for SMT (против PIC16C74B-04E/PQ)
- Extended-temperature option vs A revision (против PIC16C74A-04E/PQ)
Заметки по проектированию
The PIC16C74BT-04E/PQ operates from a single 5V supply. Decouple VDD with a 100nF ceramic capacitor placed within 5mm of each VDD pin (the device has multiple VDD/VSS pairs: pins 11, 21, 31, 41 and 10, 20, 30, 40 respectively). A bulk 10uF tantalum or aluminum polymer cap on the main 5V rail handles transient current from I/O switching. Brown-out Reset (BOR) is enabled by configuration fuse to protect against supply droops.
Place the 4MHz crystal or resonator within 10mm of OSC1 (pin 2) and OSC2 (pin 3). Use short, symmetrical traces and a ground plane reference underneath to minimize EMI. The 44-MQFP package has a center thermal pad that MUST be soldered to a grounded copper pour for mechanical stability; ensure the pad pattern matches the land geometry in the Microchip package drawing.
OTP parts cannot be erased or re-flashed. Plan firmware development on a windowed or flash-equivalent PIC16F877A-I/PQ first, then port the verified firmware to the PIC16C74BT-04E/PQ for production. Do not exceed 5V on any pin - the MCLR/VPP pin (pin 1) tolerates up to 13.5V only in programming mode, not in run mode. Always tie MCLR through a 10k pull-up to VDD.
Информация о соответствии
Compliance data not provided in verified web sources; marked unknown per data authenticity rules. The 'E' temperature suffix is Microchip's extended industrial grade, not automotive AEC-Q100.
