PIC16F1459-I/ML - 8-Bit 48MHz USB MCU 14KB Flash | Microchip
Артикул: PIC16F1459-I/ML ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $2.65 | $2,65 |
| 10 | $2.39 | $23,90 |
| 100 | $2.13 | $213,00 |
| 500 | $1.91 | $955,00 |
| 1.000 | $1.7 | $1.700,00 |
PIC16F1459-I/ML Обзор
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (typically flash), volatile working memory (RAM), and a configurable set of peripherals such as timers, ADCs, communication controllers, and GPIO. The PIC16F1459 belongs to the 8-bit PIC16 family, which sits within the broader microcontroller taxonomy of embedded computing devices that also includes 16-bit dsPIC/PIC24, 32-bit PIC32, and competing ARM Cortex-M based MCUs. Its compact footprint and built-in USB make it a common choice for compact, cost-sensitive, USB-aware embedded products.
Key features include a 10-bit ADC with up to 9 channels, two standalone 10-bit PWM modules, a USB 2.0 full-speed device controller with on-chip transceiver and clock-recovery circuit, an internal 48 MHz oscillator that eliminates the need for an external crystal in many designs, and wide operating voltage support of 2.3 V to 5.5 V. The XLP technology provides nanoWatt sleep currents, useful for battery-powered applications that must wake on USB attach or other interrupts. The 20-pin QFN package exposes a thermal pad for improved dissipation and supports surface-mount assembly on compact PCBs.
Typical applications include USB human-interface devices such as keyboards, mice, and game controllers; USB-to-UART bridges and CDC virtual COM ports; LED lighting controllers with PWM dimming; consumer IR remote controls with USB charging; and small sensor hubs or data loggers that stream over USB. The combination of native USB, ample flash, and a tiny QFN package is the primary value proposition over competing 8-bit MCUs that lack an integrated USB transceiver.
When designing with this device, ensure the PCB layout routes the USB D+/D- lines as a 90 ohm differential pair, place the VBUS sense resistor close to the MCU, and follow Microchip's USB hardware design guidelines. The QFN-20 exposed pad must be soldered to a sufficient copper pour for thermal and electrical ground performance, and decoupling capacitors must be placed within a few millimetres of each supply pin.
Аналоги без доработки для PIC16F1459-I/ML — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC16F1459-I/ML (тот же форм-фактор и посадочное место) — отличается по Package, I/O Pins, MSL Level, Operating Temperature, PWM Modules.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC16F1459T-I/ML
✅ Прямая замена✓ В наличии
$1.62 / шт.
Открыть даташит →PIC16F1459-I/ML Максимальные параметры и электрические характеристики
| Core Architecture | PIC16 enhanced mid-range 8-bit |
| Program Memory (Flash) | 14 KB (8K x 14) |
| Data RAM | 1024 bytes |
| Non-volatile Data EEPROM (HEF) | 128 bytes |
| Maximum CPU Clock Frequency | 48 MHz |
| Instruction Set Size | 49 instructions, 16 stack levels |
| Operating Voltage Range | 2.3 V to 5.5 V |
| USB Module | USB 2.0 full-speed device with clock recovery |
| ADC | 10-bit, up to 9 channels |
| PWM Modules | 2 x 10-bit standalone PWM |
| Internal Oscillator | 48 MHz (no external crystal required) |
| Low-Power Technology | XLP (eXtreme Low Power) |
| Диапазон рабочих температур | -40 C to +85 C (industrial, -I suffix) |
| Корпус | 20-pin QFN (4x4 mm) with exposed pad |
| Тип монтажа | Surface Mount |
| Уровень MSL | MSL3 (per JEDEC J-STD-020) |
| Статус RoHS | Compliant |
Конфигурация выводов PIC16F1459-I/ML
| Контакт 1 | RA5 — GPIO / analog input / ICSPDAT |
| Контакт 2 | RA4 — GPIO / analog input / ICSPCLK |
| Контакт 3 | RA3 — GPIO / MCLR (reset, active-low) |
| Контакт 4 | RC5 — GPIO / PWM output |
| Контакт 5 | RC4 — GPIO / PWM output / USB D- |
| Контакт 6 | RC3 — GPIO / analog input |
| Контакт 7 | RC2 — GPIO / analog input |
| Контакт 8 | RC1 — GPIO / analog input / SOSCO |
| Контакт 9 | RC0 — GPIO / analog input / SOSCI |
| Контакт 10 | VSS — Ground |
| Контакт 11 | VDD — Positive supply voltage (2.3 V to 5.5 V) |
| Контакт 12 | RA2 — GPIO / analog input / DAC output |
| Контакт 13 | RA1 — GPIO / analog input / VREF+ |
| Контакт 14 | RA0 — GPIO / analog input / ICSPDAT |
| Контакт 15 | RB7 — GPIO / analog input |
| Контакт 16 | RB6 — GPIO / analog input / ICSPCLK |
| Контакт 17 | RB5 — GPIO / analog input |
| Контакт 18 | RB4 — GPIO / analog input / USB D+ |
| Контакт 19 | RC7 — GPIO / PWM output |
| Контакт 20 | RC6 — GPIO / PWM output |
Типичное применение
PIC16F1459-I/ML подходит для 6 применениеs: USB HID Keyboard or Mouse, USB to UART Bridge (CDC Virtual COM Port), LED Lighting Controller with PWM Dimming, USB Charging Dongle and Power Bank Monitor, USB Sensor Hub / Data Logger, Consumer IR Remote with USB Charging.
USB HID Keyboard or Mouse
The PIC16F1459-I/ML is a natural fit for USB HID input devices such as keyboards, mice, game controllers, and remote controls. The integrated USB 2.0 full-speed device with on-chip transceiver and clock-recovery circuit eliminates external USB PHY components and the 48 MHz USB clock crystal in many designs. With 14 KB of flash and 1024 bytes of RAM, the MCU comfortably hosts the Microchip USB stack plus HID report handling, debouncing, and wake-on-Wake logic. Designers should follow the 90 ohm differential routing for D+/D- and place the VBUS sense resistor near the IC for robust enumeration at 1.5 Mbps and 12 Mbps USB full-speed.
Рекомендуется
USB to UART Bridge (CDC Virtual COM Port)
The PIC16F1459-I/ML can act as a USB-to-serial bridge using the CDC class driver, exposing a virtual COM port to the host without requiring a custom driver on Windows, macOS, or Linux. The 48 MHz CPU and 14 KB flash can host the CDC stack plus command-line UART logic at common baud rates up to 921600 bps. Two standalone 10-bit PWM outputs and a 10-bit ADC with up to 9 channels let the bridge also sample sensors or drive simple actuators, making the device useful for prototyping and field-debug tools. The XLP deep-sleep current under 1 uA lets the bridge enter low-power states between bursts.
Рекомендуется
LED Lighting Controller with PWM Dimming
The PIC16F1459-I/ML is suited to small LED lighting controllers and RGB colour-mixing drivers, leveraging its two standalone 10-bit PWM modules to drive constant-current sinks or external MOSFET gates with smooth dimming. The 1024-byte RAM buffer can hold colour-lookup tables for effects such as fades, chases, and music-reactive patterns, while the USB interface allows host-side configuration of brightness curves and scenes. The wide 2.3 V to 5.5 V supply range supports both 3.3 V logic-level designs and 5 V analog-mixed lighting PCBs. Designers should leverage the QFN exposed pad as a thermal relief when driving high-current LED strings.
Рекомендуется
USB Charging Dongle and Power Bank Monitor
The PIC16F1459-I/ML's USB module, 10-bit ADC, and XLP low-power features suit it for portable USB charging accessories, power-bank fuel gauges, and USB voltage/current monitors. The ADC can sample VBUS voltage and a sense-resistor drop to compute load current, while the USB CDC interface reports state-of-charge and temperature over USB to a host GUI. The 2.3 V minimum operating voltage lets the MCU run directly from a single Li-ion cell without an LDO. Sleep currents under 1 uA preserve battery life when the charger is idle, and the 48 MHz internal oscillator avoids external crystals to keep BOM cost low.
Рекомендуется
USB Sensor Hub / Data Logger
Engineers building small USB sensor hubs, environment monitors, or handheld data loggers can use the PIC16F1459-I/ML to bridge I2C/SPI sensors to a host over USB CDC or vendor-class bulk transfers. The 14 KB flash accommodates USB stack plus a small sensor-acquisition scheduler, and the 1024-byte RAM is sufficient for short batch buffers before bulk transmission. The 10-bit ADC samples analog channels such as temperature thermistors or photocells. The 20-pin QFN 4x4 mm footprint fits inside compact dongle enclosures, while the industrial -40 C to +85 C temperature grade supports field-deployed sensors.
Рекомендуется
Consumer IR Remote with USB Charging
The PIC16F1459-I/ML can host both the USB charging interface and an IR transmitter firmware in a single MCU, useful for TV/STB remote controls and air-conditioner controllers that expose a USB-C charging port. The 48 MHz core handles RC5/RC6 or NEC protocol encoding in software, while the USB module manages Li-ion charging state and firmware-update bootloaders. Two 10-bit PWM outputs can drive IR LEDs at carrier frequencies up to ~78 kHz, and the XLP deep-sleep mode extends standby time on a small rechargeable cell. The QFN-20 4x4 mm package keeps the remote PCB under 20 mm square.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC16F1459-I/ML — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC16F1459T-I/ML | PIC16F1459-I/SS |
|---|---|---|---|
| Package | 20-pin QFN (4x4 mm) with EP | 20-pin QFN (4x4 mm) with EP - identical | 20-pin SSOP - different footprint, NOT drop-in |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 14 KB | 14 KB | 14 KB |
| Data RAM | 1024 bytes | 1024 bytes | 1024 bytes |
| Maximum Clock Frequency | 48 MHz | 48 MHz | 48 MHz |
| Operating Voltage | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| USB Module | USB 2.0 FS with clock recovery | USB 2.0 FS with clock recovery | USB 2.0 FS with clock recovery |
| Temperature Range | -40 C to +85 C (industrial) | -40 C to +85 C (industrial) | -40 C to +85 C (industrial) |
| Pin Count | 20 | 20 | 20 |
Ключевые отличия
- Integrated USB 2.0 FS device with on-chip transceiver and clock recovery - no external USB crystal required (против PIC16F1454-E/P (8-pin DIP, no USB))
- XLP nanoWatt sleep current under 1 uA with USB wake-on-attach support (против ATmega8A (no native USB, ~5 uA sleep at 3 V))
- Compact 20-pin QFN 4x4 mm footprint with exposed thermal pad (против PIC16F1459-I/SS (20-pin SSOP, 7.2 mm wide))
Заметки по проектированию
Route USB D+ and D- as a 90 ohm differential pair on the top layer, with continuous ground reference beneath. Keep the pair length-matched within 150 mil and avoid stubs. Place the VBUS sense resistor within 5 mm of the VBUS pin and route a clean trace to the MCU. Reference Microchip application note AN26 - 'USB Hardware Design Recommendations' for full layout guidance.
Solder the QFN-20 exposed pad to a continuous ground pour with thermal vias (typically 4-6 vias in a 0.3 mm grid) connecting to an inner ground plane. Estimated: with 4 thermal vias of 0.3 mm diameter, the thermal resistance theta-JA drops from ~70 C/W (no pad) to ~45 C/W. Without proper pad soldering, the die temperature can exceed 100 C at moderate ambient and self-heating loads.
When USB is enabled, RC4 (D-) and RB4 (D+) are multiplexed with GPIO functions and lose their digital I/O capability - design the GPIO budget accordingly. The alternate ICSP pins (RA0/RA1) overlap with the analog comparator and DAC outputs - choose carefully during programming-mode debug. Do not omit the VBUS decoupling capacitor; a 4.7 uF ceramic placed close to VDD is the minimum per USB 2.0 specification.
Add a 100 nF ceramic decoupling capacitor on each VDD pin, placed within 2 mm of the pin, plus a 4.7 uF bulk capacitor on the VBUS rail. The XLP sleep mode draws less than 1 uA but wakes on USB attach, so the bulk capacitor must hold VDD stable during wake-up transients. Estimated: a 4.7 uF bulk cap sustains VDD above 2.3 V for ~50 ms during a 10 mA wake burst at 3.3 V input.
Информация о соответствии
RoHS and REACH compliant per Microchip product page. Industrial temperature grade -40 C to +85 C. Not AEC-Q100 qualified - for automotive, Microchip offers PIC16F1xxx AEC-Q100 variants separately. Halogen-free and lead-free packaging per Microchip environmental compliance disclosure.
