PIC16F1939T-I/PT - 8-Bit XLP MCU 32MHz 28KB Flash 44-TQFP | Microchip
Артикул: PIC16F1939T-I/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $4.92 | $4,92 |
| 10 | $4.45 | $44,50 |
| 100 | $3.95 | $395,00 |
| 500 | $3.58 | $1.790,00 |
| 1.000 | $3.25 | $3.250,00 |
PIC16F1939T-I/PT Обзор
An 8-bit PIC microcontroller (MCU) is a single-chip computer based on Microchip's RISC-based PIC architecture, integrating CPU, Flash program memory, SRAM, EEPROM, peripherals (ADC, timers, PWM, communication interfaces), and I/O pins on a single CMOS die. Within the broader hierarchy, the PIC16F1939 belongs to the PIC16F family -> PIC microcontroller -> 8-bit MCU -> microcontroller -> embedded controller -> semiconductor IC. The 'F' suffix denotes Flash program memory; '19' indicates the enhanced mid-range core with nanoWatt XLP extreme low-power features.
Key features include the integrated LCD driver supporting up to 256 segments, 14-channel 10-bit ADC, multiple Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), I2C, and SPI peripherals, plus 5 PWM modules. The nanoWatt XLP technology provides sleep currents as low as 9 nA typical, making it suitable for battery-powered applications requiring long operational life.
The 44-TQFP package variant (suffix /PT) offers 25 general-purpose I/O pins, while alternate package options include 28-pin SPDIP (/SP), 28-pin SOIC (/SO), 44-pin QFN (/MV), and 40-pin UQFN (/PT with -I/P, /PT). The /PT package is supplied in Tape & Reel format with standard 1,200-piece packaging.
Typical applications include handheld consumer devices with LCD displays, IoT sensor nodes, battery-powered metering, white goods and home appliance front panels, and industrial control panels. The integrated LCD driver eliminates external display controller ICs, reducing BOM cost in user-interface applications. The 1.8V minimum supply enables direct connection to single-cell battery sources including alkaline, NiMH, or lithium chemistries.
When designing with this device, ensure proper ICD/ICSP connection via the PGC/PGD pins for in-circuit debugging and programming. The wide supply voltage range simplifies designs that must accommodate battery voltage variation over discharge cycles without active temperature control.
Аналоги без доработки для PIC16F1939T-I/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC16F1939T-I/PT (тот же форм-фактор и посадочное место) — отличается по ADC, I/O Pins, Timers, Package, LCD Driver.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC16F1938T-I/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC16F1937T-I/PT
✅ Прямая замена✓ В наличии
$2.55 / шт.
Открыть даташит →PIC16F1939-I/PT
✅ Прямая замена✓ В наличии
$3.42 / шт.
Открыть даташит →PIC16F1947T-I/PT
✅ Прямая замена✓ В наличии
$3.16 / шт.
Открыть даташит →PIC16F1939T-I/SO
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC16F1939T-I/MV
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC16F19186-I/PT
✅ Прямая замена✓ В наличии
$1.82 / шт.
Открыть даташит →PIC16F1939T-I/PT Максимальные параметры и электрические характеристики
| Core | PIC 8-bit RISC |
| CPU Clock Speed | 32 MHz |
| Program Memory (Flash) | 28 KB (16K x 14) |
| RAM | 1 KB |
| EEPROM | 256 bytes |
| Напряжение питания | 1.8 V to 5.5 V |
| I/O Pins | 25 |
| LCD Driver | Integrated (up to 256 segments) |
| ADC | 10-bit, 14-channel ADC |
| PWM Modules | 5 |
| Communication | EUSART, I2C, SPI |
| Timers | 5 (8-bit / 16-bit) |
| Корпус | 44-pin TQFP (10x10 mm) |
| Рабочая температура | -40C to +85C (Industrial) |
| Technology | nanoWatt XLP (eXtreme Low Power) |
| Тип монтажа | Surface Mount |
| Уровень MSL | 3 (per JEDEC J-STD-020) |
| Статус RoHS | Compliant |
Конфигурация выводов PIC16F1939T-I/PT
| Контакт 1 | RE3/MCLR — Digital input / Master Clear (reset) |
| Контакт 2 | RA0 — GPIO / analog input AN0 |
| Контакт 3 | RA1 — GPIO / analog input AN1 |
| Контакт 4 | RA2 — GPIO / analog input AN2 |
| Контакт 5 | RA3 — GPIO / analog input AN3 / Vref+ |
| Контакт 6 | RA4 — GPIO / analog input AN4 |
| Контакт 7 | RA5 — GPIO / analog input AN5 |
| Контакт 8 | RA6 — GPIO / analog input AN6 |
| Контакт 9 | RA7 — GPIO / analog input AN7 |
| Контакт 10 | VSS — Ground |
| Контакт 11 | VDD — Positive supply voltage |
| Контакт 12 | RB0 — GPIO / interrupt-on-change |
| Контакт 13 | RB1 — GPIO / interrupt-on-change |
| Контакт 14 | RB2 — GPIO / interrupt-on-change |
| Контакт 15 | RB3 — GPIO / interrupt-on-change |
| Контакт 16 | RB4 — GPIO / interrupt-on-change |
| Контакт 17 | RB5 — GPIO / interrupt-on-change / ICSP PGD |
| Контакт 18 | RB6 — GPIO / ICSP PGC |
| Контакт 19 | RB7 — GPIO / ICSP PGM |
| Контакт 20 | RC0 — GPIO / PWM |
| Контакт 21 | RC1 — GPIO / PWM |
| Контакт 22 | RC2 — GPIO / PWM |
| Контакт 23 | RC3 — GPIO / PWM / SCL |
| Контакт 24 | RC4 — GPIO / PWM / SDA |
| Контакт 25 | RC5 — GPIO / PWM |
| Контакт 26 | RC6 — GPIO / PWM / TX |
| Контакт 27 | RC7 — GPIO / PWM / RX |
| Контакт 28 | RE0 — GPIO |
| Контакт 29 | RE1 — GPIO |
| Контакт 30 | RE2 — GPIO |
| Контакт 31 | VDD — Positive supply voltage |
| Контакт 32 | VSS — Ground |
| Контакт 33 | RD0 — GPIO |
| Контакт 34 | RD1 — GPIO |
| Контакт 35 | RD2 — GPIO |
| Контакт 36 | RD3 — GPIO |
| Контакт 37 | RD4 — GPIO |
| Контакт 38 | RD5 — GPIO / PWM |
| Контакт 39 | RD6 — GPIO / PWM |
| Контакт 40 | RD7 — GPIO / PWM |
| Контакт 41 | SEG0 — LCD segment output |
| Контакт 42 | SEG1 — LCD segment output |
| Контакт 43 | SEG2 — LCD segment output |
| Контакт 44 | SEG3 — LCD segment output / OSC1 |
Типичное применение
PIC16F1939T-I/PT подходит для 6 применениеs: Battery-Powered Metering with LCD Display, White Goods Front Panel User Interface, IoT Sensor Node with LCD, Industrial Control Panel with Segment Display, Handheld Consumer Device with LCD, Automotive Accessory Controller (Non-Safety).
Battery-Powered Metering with LCD Display
The PIC16F1939T-I/PT's integrated LCD driver (up to 256 segments), nanoWatt XLP technology (9 nA sleep current), and 1.8V to 5.5V supply range make it ideal for battery-powered metering applications. Placed as the main MCU, the device drives a segment LCD showing consumption data while sleeping between measurements, preserving battery life over multi-year deployments. Compared to MCUs requiring an external LCD controller, the built-in driver eliminates a companion IC and reduces BOM cost by $0.50-$1.00. Single-cell alkaline, lithium, or two AA batteries connect directly to VDD with no LDO required.
Рекомендуется
White Goods Front Panel User Interface
The PIC16F1939T-I/PT serves as the user-interface MCU in white goods (washing machines, dishwashers, refrigerators) where its integrated LCD driver, 25 I/O pins, and 5 PWM modules directly interface to mechanical switches, encoders, and indicator LEDs. The 32MHz clock supports responsive button-debounce routines and rapid LCD updates. The 44-TQFP industrial-grade (-40C to +85C) footprint withstands appliance thermal environments. Engineers typically connect 7-segment LCD displays, buzzer drivers, and rotary encoder inputs, with PWM controlling triac-driven motor or heater elements.
Рекомендуется
IoT Sensor Node with LCD
The PIC16F1939T-I/PT functions as the central MCU in IoT sensor nodes with local LCD readouts, where the integrated LCD driver eliminates a companion display controller and the nanoWatt XLP sleep current extends battery life. The 14-channel 10-bit ADC reads multiple sensor inputs (temperature, humidity, light, pressure) while EUSART or SPI communicates with a wireless module. The 1.8V minimum Vdd accepts direct single-AA or coin-cell battery operation, simplifying power tree design. Compared to MCUs without integrated LCD, the integrated driver saves PCB area and reduces firmware complexity.
Рекомендуется
Industrial Control Panel with Segment Display
The PIC16F1939T-I/PT is well-suited for industrial control panels where its industrial temperature grade (-40C to +85C), 44-TQFP surface-mount package, and integrated LCD driver support factory-floor operation. Engineers use it to drive 7-segment or 16-segment LCD glass displays showing process variables (temperature, pressure, flow rates) while accepting digital inputs from limit sensors. The 5 PWM outputs control proportional valves or indicator lamps, and the EUSART interfaces to RS-485 transceivers for factory networking. The 1.8V to 5.5V supply accepts 24V bus power with simple buck regulation.
Рекомендуется
Handheld Consumer Device with LCD
The PIC16F1939T-I/PT's combination of low power, integrated LCD, and 32MHz performance makes it ideal for handheld consumer devices such as remote controls, digital thermometers, kitchen scales, and personal health monitors. The 28KB Flash accommodates feature-rich firmware with multiple modes and LCD menus, while 1KB RAM supports real-time display buffering. The compact 44-TQFP (10x10 mm) footprint fits into small enclosures, and the 1.8V minimum supply enables single-CR2032 or 2xAAA battery operation with measured sleep currents around 9 nA typical per Microchip datasheet DS41578.
Рекомендуется
Automotive Accessory Controller (Non-Safety)
The PIC16F1939T-I/PT functions as an accessory controller in non-safety automotive applications (interior lighting, climate displays, accessory gauges) where its LCD driver, 25 I/O, and industrial temperature range fit dashboard cluster requirements. Note: this variant is NOT AEC-Q100 qualified - for safety-critical or under-hood use, select automotive-qualified PIC16F1939 equivalents or migrate to PIC16F1939-E/PT extended-temperature variants. The wide supply range tolerates 12V vehicle bus voltage with appropriate regulation, supporting body-electronics modules with segment LCD readouts.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC16F1939T-I/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC16F1938T-I/PT | PIC16F1937T-I/PT | PIC16F1939-I/PT | PIC16F1947T-I/PT | PIC16F19186-I/PT |
|---|---|---|---|---|---|---|
| Package | 44-TQFP (10x10) | 44-TQFP (10x10) - same | 44-TQFP (10x10) - same | 44-TQFP (10x10) - same | 44-TQFP (10x10) - same | 44-TQFP (10x10) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | |
| Flash Memory | 28 KB (16K x 14) | 16 KB (-43%) | 8 KB (-71%) | 28 KB (same) | 28 KB (same) | |
| RAM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | |
| CPU Clock Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | |
| Supply Voltage | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | |
| LCD Driver | Yes (256 segments) | Yes (256 segments) | Yes (256 segments) | Yes (384 segments) | Yes | |
| I/O Pins | 25 | 25 | 25 | 36 | 36 |
Ключевые отличия
- Highest memory variant with integrated LCD driver in PIC16F193x family (против PIC16F1938T-I/PT)
- Drop-in upgrade option with extended peripherals and more pins (против PIC16F1947T-I/PT)
- nanoWatt XLP extreme low-power technology (против PIC16F19186-I/PT)
Заметки по проектированию
Decouple VDD with 100nF + 10uF ceramic capacitors placed within 5mm of each VDD/VSS pair. The PIC16F1939T-I/PT has multiple VDD pins (11, 31) and VSS pins (10, 32) on the 44-TQFP; both pairs must be decoupled separately to prevent digital switching noise from coupling into analog sections. Estimated: total bulk capacitance of 20uF across both VDD rails suffices for typical 32MHz operation with PWM switching loads up to 20mA peak.
Route the ICSP signals (PGC/PGD on RB6/RB7, MCLR on RE3) to a 6-pin 0.1-inch header for in-circuit serial programming and debugging. Add a 10kohm pull-up to VDD on MCLR (RE3) per Microchip recommendation, plus a 100nF capacitor to ground for ESD protection. Keep PGC/PGD traces short (< 50mm) and isolated from switching power traces to ensure reliable programming with the PICkit 3/4 or ICD 4.
Do not configure RE3/MCLR as a digital GPIO in your application code unless you have disabled the MCLR function via the CONFIG register. RE3 is an input-only pin when MCLR is enabled, and floating RE3 can cause spurious resets. Use the internal weak pull-up or external 10kohm pull-up on RE3. Also ensure LCD segment pins are not driven as outputs when LCDCON is active - shared pin functions require careful configuration per the PPS (Peripheral Pin Select) registers.
The 44-TQFP package has theta_JA of approximately 50-60 C/W on a standard JEDEC 4-layer PCB. At maximum 32MHz operation with all peripherals active, the device dissipates approximately 30-50mW (estimated: VDD=5V, IDD_active=10mA), giving a junction-to-ambient temperature rise of 2-3 C/W. No heatsink required for typical applications. For extended-temperature environments, ensure PCB copper area on VDD/VSS pins keeps junction temperature below 85C industrial grade.
When using the 32MHz internal oscillator with 4x PLL, place the PIC16F1939T-I/PT away from high-current switching traces to minimize EMI coupling into the analog ADC inputs. The 10-bit ADC achieves best accuracy with source impedance below 2.5kohm and adequate acquisition time (minimum 5us). Add a 100nF bypass capacitor on each ANx analog input pin used for ADC measurements to filter high-frequency noise.
Информация о соответствии
RoHS and REACH compliant per Microchip product page. Industrial temperature grade -40C to +85C. Not AEC-Q100 qualified - not recommended for safety-critical automotive applications.