PIC16F76T-I/SO - 8-Bit 20MHz 14KB Flash MCU 28-SOIC | Microchip
Артикул: PIC16F76T-I/SO ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $7.16 | $7,16 |
| 10 | $6.45 | $64,50 |
| 100 | $5.74 | $574,00 |
| 500 | $5.1 | $2.550,00 |
| 1.000 | $4.55 | $4.550,00 |
PIC16F76T-I/SO Обзор
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals. The PIC16F76T-I/SO belongs to the mid-range PIC16 family, which sits in the 8-bit PIC architecture hierarchy between baseline PIC10/12 devices and enhanced mid-range PIC18/24 parts. PIC MCUs use a RISC instruction set (35 single-word instructions here) with a Harvard memory map, allowing deterministic instruction timing and low interrupt latency - core traits that distinguish PIC MCUs from CISC architectures like 8051 or AVR.
Key features include 14 KB self-programmable FLASH, 368 bytes data RAM, in-circuit serial programming (ICSP), a 5-channel 8-bit ADC, capture/compare/PWM modules, USART with 9-bit address masking, and a master SSP port supporting SPI and I2C. The 200 ns instruction cycle at 20 MHz clock enables fast loop execution; combined with the 8-bit datapath and 14-bit instruction word, it provides an effective CISC-like code density with RISC-style throughput.
Typical applications span industrial control, motor drive, sensor conditioning, lighting control, automotive body electronics, consumer white goods, and small appliances. The 22 I/O count and 5V tolerance on digital pins make it a strong fit for legacy 5V logic systems, while the internal oscillator option reduces external BOM.
When designing, observe the in-circuit programming pin assignments (RB6/RB7) and reserve the MCLR pin configuration for proper reset behavior. Decouple VDD with 100 nF close to the supply pin, and follow Microchip's PIC16F7X reference design for ADC accuracy and oscillator layout guidance.
This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the same PIC16F7X family, and practical design notes that complement the manufacturer datasheet.
Аналоги без доработки для PIC16F76T-I/SO — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC16F76T-I/SO (тот же форм-фактор и посадочное место) — отличается по Package, Timers, Operating Temperature, ADC, Core.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC16F76-I/SO
✅ Прямая замена✓ В наличии
$2.1 / шт.
Открыть даташит →PIC16F76T-E/SO
✅ Прямая замена✓ В наличии
$2.65 / шт.
Открыть даташит →PIC16F73-I/SO
✅ Прямая замена✓ В наличии
$2.45 / шт.
Открыть даташит →PIC16F876A-I/SO
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC16F76T-I/SO Максимальные параметры и электрические характеристики
| Core Architecture | PIC 8-bit RISC |
| Program Memory (FLASH) | 14 KB (8K x 14 words) |
| Data RAM | 368 bytes |
| Maximum CPU Frequency | 20 MHz |
| Instruction Cycle Time | 200 ns |
| Number of I/O Pins | 22 |
| Количество выводов | 28 |
| Supply Voltage (VDD) | 2.0 V to 5.5 V |
| ADC | 5 channels x 8-bit |
| Timers | 2 x 8-bit + 1 x 16-bit |
| Communication Interfaces | USART, SSP (SPI / I2C) |
| Рабочая температура | -40 C to +85 C (Industrial) |
| Корпус | 28-pin SOIC (0.295 inch / 7.50 mm width) |
| Тип монтажа | Surface Mount (Tape and Reel) |
| ICSP Programming | Yes (RB6/RB7) |
| Статус RoHS | Compliant |
| Уровень MSL | 1 (unlimited floor life) |
Конфигурация выводов PIC16F76T-I/SO
| Контакт 1 | MCLR/VPP — Master clear reset (active low) / programming voltage input |
| Контакт 2 | RA0/AN0 — PORTA bit 0 / analog input 0 |
| Контакт 3 | RA1/AN1 — PORTA bit 1 / analog input 1 |
| Контакт 4 | RA2/AN2 — PORTA bit 2 / analog input 2 |
| Контакт 5 | RA3/AN3/VREF — PORTA bit 3 / analog input 3 / ADC reference voltage |
| Контакт 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| Контакт 7 | RA5/AN4/SS — PORTA bit 5 / analog input 4 / SPI slave select |
| Контакт 8 | VSS — Ground reference |
| Контакт 9 | OSC1/CLKIN — Crystal oscillator input / external clock |
| Контакт 10 | OSC2/CLKOUT — Crystal oscillator output / clock output |
| Контакт 11 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock input |
| Контакт 12 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 |
| Контакт 13 | RC2/CCP1 — PORTC bit 2 / Capture/Compare/PWM 1 |
| Контакт 14 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| Контакт 15 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| Контакт 16 | RC5/SDO — PORTC bit 5 / SPI data out |
| Контакт 17 | RC6/TX/CK — PORTC bit 6 / USART TX / clock |
| Контакт 18 | RC7/RX/DT — PORTC bit 7 / USART RX / data |
| Контакт 19 | VSS — Ground reference |
| Контакт 20 | VDD — Positive supply voltage |
| Контакт 21 | RB0/INT — PORTB bit 0 / external interrupt |
| Контакт 22 | RB1 — PORTB bit 1 |
| Контакт 23 | RB2 — PORTB bit 2 |
| Контакт 24 | RB3/PGM — PORTB bit 3 / low-voltage programming |
| Контакт 25 | RB4 — PORTB bit 4 |
| Контакт 26 | RB5 — PORTB bit 5 |
| Контакт 27 | RB6/PGC — PORTB bit 6 / ICSP clock |
| Контакт 28 | RB7/PGD — PORTB bit 7 / ICSP data |
Типичное применение
PIC16F76T-I/SO подходит для 6 применениеs: Industrial Control PLCs, Sensor Conditioning and Signal Conditioning Modules, Lighting Control Systems, HVAC Fan and Blower Motor Control, Automotive Body Electronics, Consumer Appliance Control.
Industrial Control PLCs
The PIC16F76T-I/SO fits industrial control PLC applications thanks to its 20 MHz CPU, 14 KB FLASH, 22 I/O, and -40C to +85C industrial temperature range. The 5-channel 8-bit ADC reads thermocouples, pressure sensors, and 4-20 mA loop inputs directly, while the USART links to a Modbus RTU master. The 200 ns instruction cycle executes fast PID loops at sub-millisecond rates, and 2.0-5.5V operation tolerates 24V-transient-filtered industrial rails.
Рекомендуется
Sensor Conditioning and Signal Conditioning Modules
Sensor signal conditioning modules use the PIC16F76T-I/SO for its 5-channel 8-bit ADC, USART, and 22 I/O. The 200 ns instruction cycle performs linearization, calibration, and digital filtering in software at sample rates above 10 kHz per channel. The 2.0-5.5V supply range powers the MCU directly from a 3.3V regulated transducer rail, and the 28-SOIC footprint simplifies SMT assembly for low-cost sensor modules.
Рекомендуется
Lighting Control Systems
DMX-512 and 0-10V lighting control applications use the PIC16F76T-I/SO for its USART (directly drives DMX-512 at 250 kbaud) and CCP/PWM modules (timing-dimmable LED outputs). The 14 KB FLASH holds DMX personality tables, fade curves, and 50+ lighting scenes. The 22 I/O expand to multiple LED driver channels or to SPI-controlled LED drivers like the TLC5940 for large installations.
Рекомендуется
HVAC Fan and Blower Motor Control
HVAC blower and fan control designs use the PIC16F76T-I/SO for brushless DC motor commutation, closed-loop RPM control, and safety monitoring. The 16-bit timer with capture input measures tachometer pulses to within 50 ns, while the 8-bit PWM module drives gate drivers at up to 20 kHz. The 2.0-5.5V supply and -40 to +85C industrial range fit rooftop unit electronics, and 14 KB FLASH holds startup, ramp, and fault-recovery state machines.
Рекомендуется
Automotive Body Electronics
Automotive body modules (window lifters, mirror adjusters, lighting controllers) use the PIC16F76T-I/SO because of its 5V-tolerant I/O, 22 GPIO, and USART for LIN-bus slave communication. The PIC16F76 is widely deployed in pre-CAN automotive networks. For under-hood or -40 to +125C requirements, migrate to PIC16F76T-E/SO (extended temperature, same pinout) or PIC16F876A-I/SO for 10-bit ADC resolution on sensor inputs.
Рекомендуется
Consumer Appliance Control
White-goods and small-appliance control boards use the PIC16F76T-I/SO for its low BOM cost, integrated ADC for temperature sensing, and PWM outputs for motor or heater regulation. The 14 KB FLASH supports UI menus, sensor calibration, and safety lockouts. The 28-SOIC package reflows at standard 260 C profiles, and the wide 2.0-5.5V supply tolerates rectified mains-derived rails with simple regulators.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC16F76T-I/SO — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC16F76-I/SO | PIC16F76T-E/SO | PIC16F73-I/SO | PIC16F876A-I/SO | PIC16F737-I/SP |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-SOIC (7.50 mm) | 28-SOIC - same | 28-SOIC - same | 28-SOIC - same | 28-SOIC - same | 28-SPDIP (NOT SOIC - PCB rework) |
| Program FLASH | 14 KB | 14 KB | 14 KB | 7 KB | 14 KB | 7 KB |
| Data RAM | 368 B | 368 B | 368 B | 192 B | 368 B | 368 B |
| Max CPU Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| ADC Resolution | 8-bit | 8-bit | 8-bit | 8-bit | 10-bit (upgrade) | 10-bit |
| Operating Temperature | -40C to +85C (I) | -40C to +85C | -40C to +125C (extended) | -40C to +85C | -40C to +85C | -40C to +85C |
| Brown-Out Reset | No | No | No | No | Yes (BOR) | Yes (BOR) |
Ключевые отличия
- Tape-and-reel packaging for high-volume SMT assembly (против PIC16F76-I/SO)
- Extended temperature for harsh-environment deployment (против PIC16F76T-E/SO (vs the I variant))
- 14 KB FLASH versus 7 KB on the smaller sibling (против PIC16F73-I/SO)
Заметки по проектированию
Decouple VDD (pin 20) and VSS (pins 8, 19) with a 100 nF X7R ceramic placed within 5 mm of the supply pins, plus a bulk 10 uF tantalum or aluminum on the same rail. The 28-SOIC has two VSS pins; both must be connected to the ground plane with low-impedance vias. Use star-ground topology for ADC VREF routing to avoid digital-return-noise coupling into analog measurements.
Place the crystal or resonator within 5 mm of OSC1 (pin 9) and OSC2 (pin 10). Keep the oscillator traces short and guard them with a grounded copper pour to minimize EMI pickup. For high-noise environments, add a 1 kohm resistor in series with OSC2 (per Microchip AN588) to reduce oscillator overdrive. Route the ICSP lines RB6/PGC (pin 27) and RB7/PGD (pin 28) directly to a programming header with no series resistors.
RB3/PGM is the low-voltage programming pin - do not pull this pin low at reset if you are using high-voltage ICSP. The MCLR pin (1) requires a 10-47 kohm pull-up to VDD; a direct connection to VDD prevents proper reset. ADC inputs share pins with digital I/O; configure the TRIS register correctly before enabling the ADC to avoid contention. Always disable the ADC module when not in use to save approximately 200 uA at 5V.
Информация о соответствии
RoHS compliance and lead-free plating per Microchip product declaration. Industrial temperature grade is not AEC-Q100 qualified; automotive deployments typically use PIC16F76T-E/SO (extended temperature) or PIC18F variants with AEC-Q100 qualification.
