PIC16F874T-04/L - 4MHz 8-Bit Flash MCU 7KB | Microchip
Артикул: PIC16F874T-04/L ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $7.2 | $7,20 |
| 10 | $6.48 | $64,80 |
| 100 | $5.76 | $576,00 |
| 500 | $5.18 | $2.590,00 |
| 1.000 | $4.61 | $4.610,00 |
PIC16F874T-04/L Обзор
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, RAM, and peripherals on one silicon die. The PIC16F family sits within the broader hierarchy of 8-bit MCU -> RISC microcontroller -> embedded controller -> semiconductor IC. Microcontrollers like the PIC16F874T-04/L are designed for deterministic real-time control tasks where predictable instruction timing and low cost outweigh raw throughput.
Key features include 33 digital I/O pins, an integrated ADC, capture/compare/PWM modules, USART, SPI, and I2C peripherals, plus Flash program memory that supports in-circuit serial programming. The 'T' suffix in the part number indicates tape-and-reel packaging for high-volume surface-mount assembly, while the '04' denotes the 4 MHz maximum clock speed and 'L' designates the 44-pin PLCC form factor.
The architecture is built on a modified Harvard design with separate program and data buses, allowing instruction fetch and data access in a single cycle. This RISC-based core gives the PIC16F874T-04/L a favorable code-density-to-performance ratio that has made the PIC16F family a long-standing workhorse for industrial, consumer, and automotive embedded designs.
Typical applications include industrial control systems, motor control, sensor interfacing, embedded data acquisition, and legacy replacement of older 8051 or PIC16C designs. Engineers also use the PIC16F874T-04/L as a low-cost companion controller in mixed-signal systems where a higher-end MCU is overkill.
When designing with this device, note that the 44-pin PLCC package is socket-friendly, which simplifies prototyping and field replacement. Ensure your programmer supports the ICSP interface and that decoupling capacitors are placed close to VDD pins to maintain ADC accuracy.
This page synthesizes distributor pricing, drop-in PIC16F family alternatives, and practical design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для PIC16F874T-04/L — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC16F874T-04/L (тот же форм-фактор и посадочное место) — отличается по Package, Timers, Core Architecture, Communication Peripherals, Operating Temperature.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC16F874-04/L
✅ Прямая замена✓ В наличии
$6.85 / шт.
Открыть даташит →PIC16F874-04/PQ
✅ Прямая замена✓ В наличии
$5.9 / шт.
Открыть даташит →PIC16F874-04I/PT
✅ Прямая замена✓ В наличии
$5.4 / шт.
Открыть даташит →PIC16F874-04I/L
✅ Прямая замена✓ В наличии
$5.4 / шт.
Открыть даташит →PIC16F874-04E/L
✅ Прямая замена✓ В наличии
$5.42 / шт.
Открыть даташит →PIC16F874-04E/PQ
✅ Прямая замена✓ В наличии
$5.1 / шт.
Открыть даташит →PIC16F874-10E/L
✅ Прямая замена✓ В наличии
$7.45 / шт.
Открыть даташит →PIC16F874T-04/L Максимальные параметры и электрические характеристики
| Core | 8-bit PIC RISC |
| Program Memory Type | Flash |
| Program Memory Size | 7 KB (4K x 14) |
| RAM Size | 192 bytes |
| Maximum Clock Speed | 4 MHz |
| Instruction Execution Time | 200 ns |
| Number of Instructions | 35 single-word |
| Supply Voltage (VDD) | 4 V to 5.5 V |
| Number of I/O Pins | 33 |
| Корпус | 44-pin PLCC (16.59 x 16.59 mm), J-lead |
| Тип монтажа | Surface Mount |
| Peripherals | ADC, USART, SPI, I2C, CCP, Timers |
| Programming Interface | ICSP (In-Circuit Serial Programming) |
Конфигурация выводов PIC16F874T-04/L
| Контакт 1 | MCLR/VPP — Master Clear (Reset) input / Programming voltage |
| Контакт 2 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| Контакт 3 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| Контакт 4 | RA2/AN2/VREF- — PORTA bit 2 / Analog input 2 / ADC reference minus |
| Контакт 5 | RA3/AN3/VREF+ — PORTA bit 3 / Analog input 3 / ADC reference plus |
| Контакт 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| Контакт 7 | RA5/AN4/SS — PORTA bit 5 / Analog input 4 / SPI slave select |
| Контакт 8 | RE0/RD/AN5 — PORTE bit 0 / Parallel read strobe / Analog input 5 |
| Контакт 9 | RE1/WR/AN6 — PORTE bit 1 / Parallel write strobe / Analog input 6 |
| Контакт 10 | RE2/CS/AN7 — PORTE bit 2 / Parallel chip select / Analog input 7 |
| Контакт 11 | VDD — Positive supply voltage (4V to 5.5V) |
| Контакт 12 | VSS — Ground reference |
| Контакт 13 | OSC1/CLKIN — Oscillator input / External clock input |
| Контакт 14 | OSC2/CLKOUT — Oscillator output / Clock output |
| Контакт 15 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock input |
| Контакт 16 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 |
| Контакт 17 | RC2/CCP1 — PORTC bit 2 / Capture/Compare/PWM 1 |
| Контакт 18 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| Контакт 19 | RD0/PSP0 — PORTD bit 0 / Parallel Slave Port bit 0 |
| Контакт 20 | RD1/PSP1 — PORTD bit 1 / Parallel Slave Port bit 1 |
| Контакт 21 | RD2/PSP2 — PORTD bit 2 / Parallel Slave Port bit 2 |
| Контакт 22 | RD3/PSP3 — PORTD bit 3 / Parallel Slave Port bit 3 |
| Контакт 23 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| Контакт 24 | RC5/SDO — PORTC bit 5 / SPI data out |
| Контакт 25 | RC6/TX/CK — PORTC bit 6 / USART transmit / USART clock |
| Контакт 26 | RC7/RX/DT — PORTC bit 7 / USART receive / USART data |
| Контакт 27 | RD4/PSP4 — PORTD bit 4 / Parallel Slave Port bit 4 |
| Контакт 28 | RD5/PSP5 — PORTD bit 5 / Parallel Slave Port bit 5 |
| Контакт 29 | RD6/PSP6 — PORTD bit 6 / Parallel Slave Port bit 6 |
| Контакт 30 | RD7/PSP7 — PORTD bit 7 / Parallel Slave Port bit 7 |
| Контакт 31 | VSS — Ground reference |
| Контакт 32 | VDD — Positive supply voltage (4V to 5.5V) |
| Контакт 33 | RB0/INT — PORTB bit 0 / External interrupt |
| Контакт 34 | RB1 — PORTB bit 1 |
| Контакт 35 | RB2 — PORTB bit 2 |
| Контакт 36 | RB3/PGM — PORTB bit 3 / Low-voltage programming |
| Контакт 37 | RB4 — PORTB bit 4 |
| Контакт 38 | RB5 — PORTB bit 5 |
| Контакт 39 | RB6/PGC — PORTB bit 6 / ICSP clock |
| Контакт 40 | RB7/PGD — PORTB bit 7 / ICSP data |
| Контакт 41 | NC — Not connected (per datasheet) |
| Контакт 42 | NC — Not connected (per datasheet) |
| Контакт 43 | NC — Not connected (per datasheet) |
| Контакт 44 | NC — Not connected (per datasheet) |
Типичное применение
PIC16F874T-04/L подходит для 6 применениеs: Industrial Control Systems, Motor Control and PWM Drives, Embedded Data Acquisition, Consumer Electronics Controllers, Legacy 8051/PIC16C Replacement, Sensor Interface and Signal Conditioning.
Industrial Control Systems
The PIC16F874T-04/L fits industrial control systems because its 33 digital I/O lines drive relays, solenoids, and indicator LEDs directly, while the integrated ADC reads 8-10 channels of analog sensor data at 10-bit resolution. At 4 MHz with 200 ns instruction execution, the RISC core handles PID loops, debouncing, and supervisory logic deterministically. The 7 KB Flash holds mid-sized control firmware, and the USART/SPI/I2C peripherals link to HMI panels and remote I/O modules. The 4-5.5 V supply range matches 5 V industrial rails directly. Compared with newer Cortex-M0 parts, the PIC16F874T-04/L trades raw throughput for deterministic timing and decades-proven reliability in factory automation.
Рекомендуется
Motor Control and PWM Drives
The PIC16F874T-04/L is well suited to low-power motor control thanks to its Capture/Compare/PWM (CCP) modules that generate precision PWM signals for DC motor speed, servo position, and small BLDC commutation. The 4 MHz clock provides adequate resolution for sub-kHz to tens-of-kHz PWM frequencies used in fans, pumps, and stepper drives. Hardware timers free the CPU from tight timing loops, while the ADC samples current or position feedback synchronously. The PLCC-44 package supports socketed prototyping for motor-control tuning. Compared with dedicated motor-controller ICs, the PIC16F874T-04/L integrates general-purpose I/O and communications in one part, simplifying board layout and BOM.
Рекомендуется
Embedded Data Acquisition
The PIC16F874T-04/L serves as a low-cost data-acquisition front-end for sensor arrays, with up to 8 analog inputs through its 10-bit ADC and a USART for streaming data to a host PC or PLC. The 192-byte RAM buffers short sample bursts, while 7 KB Flash stores calibration tables and acquisition state machines. The 4 MHz instruction cycle runs at 1 MIPS, sufficient for sub-kHz sample rates typical of temperature, pressure, and strain-gauge monitoring. SPI and I2C ports connect to external ADCs or digital sensors for higher-precision channels. Compared with discrete ADC-plus-MCU designs, the integrated PIC16F874T-04/L shrinks PCB area and BOM cost.
Рекомендуется
Consumer Electronics Controllers
The PIC16F874T-04/L powers consumer device controllers such as appliance keypads, remote-base stations, and small appliance displays, where its 33 I/O pins scan matrix keypads, drive LED indicators, and talk to peripherals via SPI or I2C. The Flash-based program memory supports field firmware updates, and the in-circuit serial programming (ICSP) interface simplifies manufacturing flow. The 4-5.5 V supply aligns with 5 V regulator rails common in white goods. Compared with newer PIC16F1xxx parts, the PIC16F874T-04/L offers a smaller, more predictable code base for mature consumer platforms where re-validation cost outweighs modernization benefit.
Рекомендуется
Legacy 8051/PIC16C Replacement
The PIC16F874T-04/L is a drop-in upgrade path for legacy 8051 or PIC16C designs, offering Flash programmability (vs one-time-programmable or mask-ROM), faster interrupt response, and modern development-tool support while keeping the same 5 V supply and instruction-cycle paradigm. Its 35-instruction RISC core is simpler to learn than 8051 assembly, and MPLAB X IDE provides free firmware development. The 44-pin PLCC package directly replaces older PLCC-44 sockets. Compared with full redesigns to ARM Cortex-M, the PIC16F874T-04/L migration is layout- and firmware-reuse-friendly, dramatically cutting validation cost.
Рекомендуется
Sensor Interface and Signal Conditioning
The PIC16F874T-04/L is ideal as a sensor-interface front-end where its ADC digitizes analog sensors, its I2C/SPI links to digital sensors, and its GPIO provides interrupt-driven event handling. The 7 KB Flash fits calibration coefficients and lookup tables, while 192 bytes RAM handles short sensor-data buffers. The 4 MHz instruction cycle is adequate for polled sensor sampling at hundreds of Hz. The USART forwards pre-processed data to upstream controllers. Compared with pure analog signal chains, the PIC16F874T-04/L digitizes early in the path, improving noise immunity and enabling software reconfiguration without hardware changes.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC16F874T-04/L — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC16F874-04/L | PIC16F874-04/PQ | PIC16F874-04I/PT | PIC16F874-04I/L | PIC16F874-04E/L |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-pin PLCC | 44-pin PLCC (tray) | 44-pin PLCC/MQFP | 44-pin TQFP | 44-pin PLCC | 44-pin PLCC |
| Maximum Clock Speed | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz |
| Program Memory | 7 KB Flash | 7 KB Flash | 7 KB Flash | 7 KB Flash | 7 KB Flash | 7 KB Flash |
| RAM | 192 bytes | 192 bytes | 192 bytes | 192 bytes | 192 bytes | 192 bytes |
| Temperature Grade | Commercial | Commercial | Commercial | Industrial | Industrial | Extended |
| Packaging Form | Tape & Reel | Tray | Tray | Tray | Tray | Tray |
| Supply Voltage | 4 V to 5.5 V | 4 V to 5.5 V | 4 V to 5.5 V | 4 V to 5.5 V | 4 V to 5.5 V | 4 V to 5.5 V |
Ключевые отличия
- Same silicon, more assembly-friendly packaging (против PIC16F874-04/L)
- Wider temperature operating range option in same family (против PIC16F874-04I/L)
- Higher speed grade option in same package (против PIC16F874-10E/L)
Заметки по проектированию
Place a 100 nF decoupling capacitor as close as possible to each VDD pin (pins 11 and 32) and a bulk 10 uF tantalum or aluminum electrolytic capacitor at the board supply entry. The PIC16F874T-04/L is a CMOS device with dynamic supply current that spikes during clock transitions; insufficient decoupling causes ADC inaccuracies and erratic brown-out resets. Keep analog AVSS (VSS) and digital VSS on a single star-ground topology.
Route the ICSP pins (RB6/PGC, RB7/PGD, MCLR/VPP) directly to an in-line programming header with no series resistors on RB6/RB7, per Microchip ICSP specification. Place the programming connector at the board edge for manufacturing access. Keep the 4 MHz crystal or resonator within 5 mm of OSC1/OSC2 (pins 13-14) with short, symmetric traces and a ground guard ring to minimize EMI.
Do not leave the MCLR pin floating - tie it to VDD through a 10 kohm pull-up resistor or use Microchip's internal MCLR configuration in the configuration word. Floating MCLR causes spurious resets. Also, configure all unused I/O pins as outputs (driving low) in firmware to minimize current consumption and avoid floating-input shoot-through current on CMOS PORTA-PORTE pins.
Информация о соответствии
RoHS/REACH compliance marked 'unknown' - the PLCC ('/L') variant predates widespread RoHS transition for this part family; check Microchip material declaration for current status. AEC-Q100 not applicable - this is a commercial-grade MCU; AEC-Q100 variants carry the '-VAO' or specific automotive part suffix.
