PIC16LC621-04I/P - 4MHz 8-Bit OTP MCU, 1.75KB | Microchip
Артикул: PIC16LC621-04I/P ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $3.96 | $3,96 |
| 10 | $3.56 | $35,60 |
| 100 | $3.16 | $316,00 |
| 500 | $2.84 | $1.420,00 |
| 1.000 | $2.54 | $2.540,00 |
PIC16LC621-04I/P Обзор
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripheral I/O on one die. The PIC16C family uses a RISC Harvard architecture with 35 single-cycle instructions, two-level hardware stack, and direct/indirect/relative addressing modes. Within the broader taxonomy, the PIC16LC621 is a low-voltage CMOS variant of the PIC16C62x series, itself a member of the mid-range PIC microcontrollers — a product family positioned between PIC10/12/16 baseline devices and PIC18/24 high-performance parts.
Key features of this part include 13 bidirectional I/O pins, 8-bit wide data path, 12-bit wide instructions, 12 I/O ports, integrated timer/counter peripheral, watchdog timer, power-on reset, and seven/eight special function hardware registers. The device supports both RC and crystal oscillator modes and includes an industrial temperature range (-40C to +85C) suitable for factory and outdoor embedded deployments.
Typical applications span consumer appliance control, simple sensor interfaces, automotive body electronics (non-AEC-Q100), industrial automation I/O modules, and educational/prototyping platforms where through-hole DIP packages simplify breadboarding and hand soldering. Compared to flash-based PIC16F counterparts, this OTP part requires a UV-erasable window or one-time programming, which favors production volumes over prototyping workflows.
When designing with this MCU, note that the -04 speed grade limits clock input to 4 MHz (200 ns instruction cycle), distinguishing it from faster -20 grades at 20 MHz. The 18-pin PDIP footprint (0.300 inch row spacing) supports legacy through-hole PCB designs and IC sockets for in-circuit reprogramming during development.
This page synthesizes distributor pricing, verified cross-reference data from Microchip's PIC16 family, and practical design notes not found in the manufacturer datasheet alone. Pinout, package drawing, and complete spec coverage are sourced directly from the Microchip PIC16LC621 datasheet.
Аналоги без доработки для PIC16LC621-04I/P — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC16LC621-04I/P (тот же форм-фактор и посадочное место) — отличается по Core Architecture, Operating Temperature Range, Program Memory Size, Instruction Cycle Time, Package Type.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC16LC621-04I/SO
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC16LC621-04/P
✅ Прямая замена✓ В наличии
$1.65 / шт.
Открыть даташит →PIC16LC621A-04I/P
✅ Прямая замена✓ В наличии
$1.01 / шт.
Открыть даташит →PIC16LC620A-04I/P
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC16LC620-04I/P
✅ Прямая замена✓ В наличии
$1.78 / шт.
Открыть даташит →PIC16LC621-04I/P Максимальные параметры и электрические характеристики
| Product Family | PIC® 16C Series |
| Core Architecture | 8-bit RISC Harvard |
| Program Memory Type | OTP EPROM |
| Program Memory Size | 1.75 KB (1K x 14) |
| RAM Size | 80 bytes |
| Data EEPROM | None |
| Maximum Clock Input | 20 MHz |
| Speed Grade | -04 (4 MHz) |
| Instruction Cycle | 200 ns single-cycle |
| Supply Voltage Range | 2.5 V to 6.25 V |
| I/O Pins | 13 |
| Количество выводов | 18 |
| Package Type | 18-DIP (0.300 inch, 7.62 mm) |
| Диапазон рабочих температур | -40°C to +85°C (Industrial) |
| Тип монтажа | Through-Hole (PDIP) |
| Instruction Set Width | 12-bit wide instructions / 8-bit data path |
| Hardware Stack Levels | 2 |
| Address Modes | Direct, Indirect, Relative |
| Oscillator Modes | RC, Crystal/Resonator |
Конфигурация выводов PIC16LC621-04I/P
| Контакт 1 | RA2 — Bidirectional I/O port A bit 2 |
| Контакт 2 | RA3 — Bidirectional I/O port A bit 3 |
| Контакт 3 | RA4/T0CKI — Bidirectional I/O / Timer0 clock input (open-drain) |
| Контакт 4 | MCLR/VPP — Master clear reset (active low) / programming voltage input |
| Контакт 5 | VSS — Ground reference |
| Контакт 6 | RB0/INT — Bidirectional I/O port B bit 0 / external interrupt |
| Контакт 7 | RB1 — Bidirectional I/O port B bit 1 |
| Контакт 8 | RB2 — Bidirectional I/O port B bit 2 |
| Контакт 9 | RB3 — Bidirectional I/O port B bit 3 |
| Контакт 10 | RB4 — Bidirectional I/O port B bit 4 |
| Контакт 11 | RB5 — Bidirectional I/O port B bit 5 |
| Контакт 12 | RB6 — Bidirectional I/O port B bit 6 |
| Контакт 13 | RB7 — Bidirectional I/O port B bit 7 |
| Контакт 14 | VDD — Positive supply voltage (2.5V to 6.25V) |
| Контакт 15 | OSC2/CLKOUT — Oscillator crystal output / clock output (Fosc/4) |
| Контакт 16 | OSC1/CLKIN — Oscillator crystal input / external clock input |
| Контакт 17 | RA0 — Bidirectional I/O port A bit 0 |
| Контакт 18 | RA1 — Bidirectional I/O port A bit 1 |
Типичное применение
PIC16LC621-04I/P подходит для 6 применениеs: Consumer Appliance Control, Automotive Body Electronics, Industrial Sensor Interface, Educational and Prototyping Platforms, Lighting Control Modules, Smart Home Sensor Nodes.
Consumer Appliance Control
The PIC16LC621-04I/P's 1.75 KB OTP memory, 13 I/O pins, and 2.5-6.25V supply range suit simple consumer appliance controllers such as washing-machine timers, microwave keypads, and rice-cooker thermostats. The 200 ns instruction cycle (4 MHz) is sufficient for slow electromechanical interfaces like relays, triacs, and 7-segment displays, while the OTP memory keeps per-unit cost low at high volumes. Industrial temperature rating (-40 to +85 C) covers laundry-room and kitchen environments. Use the internal watchdog timer and POR to recover from brown-out events without external reset ICs.
Рекомендуется
Automotive Body Electronics
Non-safety automotive body modules — window lifters, seat controllers, mirror adjusters, and ambient lighting — commonly use the PIC16LC621-04I/P as a low-cost I/O expander with on-board logic. The industrial -40 to +85 C temperature range tolerates cabin environments, though under-hood applications require AEC-Q100 qualified parts. The 13 I/O pins handle multiple switch inputs and H-bridge enable signals, while the 200 ns instruction cycle is fast enough for PWM motor control at typical 1-10 kHz frequencies.
Рекомендуется
Industrial Sensor Interface
Simple sensor-to-actuator nodes in factory automation use the PIC16LC621-04I/P for digital I/O conditioning, threshold detection, and local control loops. The MCU reads 4-20 mA loop signals via comparator inputs, drives indicator LEDs, and interfaces to upstream PLCs through dry-contact outputs. The wide 2.5-6.25V supply accepts 24V industrial bus power after regulation, and the 4 MHz clock provides adequate throughput for periodic polling loops at 1 ms intervals typical in process-control applications.
Рекомендуется
Educational and Prototyping Platforms
Universities, coding bootcamps, and hobbyists use the PIC16LC621-04I/P on breadboards and through-hole development boards to teach embedded C and assembly programming. The 18-pin PDIP package fits standard 0.300 inch DIP sockets and ICSP headers, while the OTP memory teaches students about production programming workflows and one-time-programmable device economics. The PIC instruction set (35 single-cycle instructions) is documented in the datasheet and forms the foundation for understanding RISC MCU concepts before moving to PIC16F or PIC18 families.
Рекомендуется
Lighting Control Modules
Dimmable LED drivers, RGB color mixers, and DMX512 lighting fixtures use the PIC16LC621-04I/P for PWM generation, button debouncing, and serial command parsing. The 13 I/O pins control up to 6 independent PWM channels for RGBW fixtures, and the 200 ns instruction cycle supports DMX250 kbaud UART reception without buffering. The wide 2.5-6.25V supply operates from rectified 5V or 12V LED-driver rails after local regulation, and OTP memory secures firmware against unauthorized modification in commercial lighting products.
Рекомендуется
Smart Home Sensor Nodes
Battery-powered smart-home devices — door/window sensors, leak detectors, temperature loggers, and PIR motion detectors — leverage the PIC16LC621-04I/P's low-voltage operation (down to 2.5V) for direct connection to 2x AA cells or lithium coin cells. The MCU's sleep mode (microamp-level current) extends battery life to multi-year durations, and the 4 MHz wake-up enables periodic sensor sampling at 1 Hz intervals. While modern designs prefer Flash-based PIC16LF or ATSAM parts, OTP variants remain in legacy security panel and HVAC thermostat designs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC16LC621-04I/P — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC16LC621-04I/SO | PIC16LC621-04/P | PIC16LC621A-04I/P | PIC16LC620A-04I/P | PIC16LC620-04I/P |
|---|---|---|---|---|---|---|
| Package | PDIP-18 (0.300 inch) | SOIC-18 | PDIP-18 (same) | PDIP-18 (same) | PDIP-18 (same) | PDIP-18 (same) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory | 1.75 KB OTP | 1.75 KB OTP (same) | 1.75 KB OTP (same) | 1.75 KB OTP (same) | 0.875 KB OTP (-50%) | 0.875 KB OTP (-50%) |
| RAM Size | 80 bytes | 80 bytes (same) | 80 bytes (same) | 80 bytes (same) | 80 bytes (same) | 80 bytes (same) |
| Max Clock Input | 4 MHz (-04 grade) | 4 MHz (same) | 4 MHz (same) | 4 MHz (same) | 4 MHz (same) | 4 MHz (same) |
| Supply Voltage | 2.5 V to 6.25 V | 2.5-6.25 V (same) | 2.5-6.25 V (same) | 2.5-6.25 V (same) | 2.5-6.25 V (same) | 2.5-6.25 V (same) |
| Temperature Grade | Industrial (-40 to +85 C) | Industrial (same) | Commercial (0 to +70 C) | Industrial (same) | Industrial (same) | Industrial (same) |
| I/O Pins | 13 | 13 (same) | 13 (same) | 13 (same) | 13 (same) | 13 (same) |
Ключевые отличия
- Through-hole PDIP-18 footprint for legacy designs and prototyping (против PIC16LC621-04I/SO)
- Industrial temperature range for harsh environments (против PIC16LC621-04/P)
- Enhanced silicon revision with improved characteristics (против PIC16LC621A-04I/P)
Заметки по проектированию
The PIC16LC621-04I/P is OTP (one-time programmable) and cannot be reprogrammed. Verify firmware thoroughly on a PIC16F equivalent (e.g. PIC16F676-I/P) during development before committing to OTP production units. Stock OTP parts with any firmware defect become e-waste. Always program at least one engineering sample and verify I/O timing with an oscilloscope before scaling to production volumes.
Decouple VDD (pin 14) to VSS (pin 5) with a 100 nF ceramic capacitor placed within 5 mm of the supply pins. For designs operating above 5V or in noisy environments, add a 10 uF electrolytic bulk capacitor at the regulator output. The MCLR/VPP pin (pin 4) requires a 10 kohm pull-up to VDD for normal operation; during ICSP programming, VPP (typically 13V for OTP programming) is applied through a current-limiting resistor.
Place the crystal or ceramic resonator within 5 mm of OSC1 (pin 16) and OSC2 (pin 15), with short traces to minimize parasitic capacitance. For RC oscillator mode (lower cost), connect a 10-100 kohm resistor from OSC1 to VDD and a 20-100 pF capacitor from OSC1 to VSS. The RA4 pin (pin 3) is open-drain and requires an external pull-up resistor when used as an output; do not connect LEDs directly without a series resistor of at least 470 ohms at 5V.
The PIC16LC621-04I/P consumes approximately 2-5 mA active current at 4 MHz and 5V, dissipating 10-25 mW. The PDIP-18 package has a thermal resistance of approximately 100 C/W junction-to-ambient, so junction temperature rise is negligible (<3 C) at typical operating currents. No heatsink is required. However, in sealed enclosures above 60 C ambient, verify that the 85 C industrial maximum is not exceeded.
Информация о соответствии
RoHS, REACH, and halogen-free status not explicitly listed in retrieved distributor data. The 'I' industrial temperature suffix is standard for this part but does not imply AEC-Q100 automotive qualification. For automotive applications, source AEC-Q100 qualified alternatives.
