PIC16LF1567-E/P - 8-Bit MCU, 14KB Flash, 32MHz, 40-PDIP | Microchip
Артикул: PIC16LF1567-E/P ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $2.95 | $2,95 |
| 10 | $2.66 | $26,60 |
| 100 | $2.36 | $236,00 |
| 500 | $2.13 | $1.065,00 |
| 1.000 | $1.95 | $1.950,00 |
PIC16LF1567-E/P Обзор
A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and peripheral interfaces into one package. PIC microcontrollers use a RISC-based Harvard architecture with separate program and data buses, which enables single-cycle instruction execution and deterministic timing critical for real-time control loops. The PIC16LF1567 belongs to the PIC16F156x mid-range MCU family hierarchy: PIC16F → mid-range 8-bit MCU → enhanced mid-range core with C compiler support → PIC16LF156x sub-family focused on mTouch and analog front-end designs.
Key features include 14 KB Flash (8K × 14 words), 1 KB RAM, hardware CVD for capacitive touch, two PWM modules, multiple communication peripherals (I²C, SPI, EUSART), and the XLP™ ultra-low-power design with nanoWatt XLP sleep currents. The 10-bit ADC provides up to 34 analog input channels with hardware oversampling and automated sequencing, offloading CPU cycles in touch and sensor applications. The 40-pin PDIP package offers easy through-hole prototyping, breadboard compatibility, and straightforward rework compared to QFN variants.
Architecturally, the PIC16LF1567 uses a 14-bit instruction word with a 35-instruction set, providing code density and predictable interrupt latency. Two on-chip op-amps and a hardware CVD module further reduce external component count in touch-sensing front ends, while the integrated mTouch library simplifies firmware development for buttons, sliders, and proximity sensors.
Typical applications include mTouch capacitive touch buttons and sliders in appliances, industrial HMI panels, battery-powered sensor nodes, LED lighting controllers with capacitive dimming interfaces, low-power IoT edge nodes, and consumer electronics front-panel interfaces. The wide ADC channel count and hardware CVD also support multi-zone capacitive proximity detection in automotive interior lighting and smart home wall switches.
When designing with the PIC16LF1567-E/P, ensure proper decoupling (100 nF + 1 µF) close to VDD/VSS pins and keep the CVD trace length short to minimize touch-sensing noise. Industrial temperature grade (-40 °C to +125 °C) supports harsh-environment deployment, but the through-hole PDIP package limits high-frequency signal integrity compared to QFN variants on 4-layer boards.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes beyond what is in the Microchip datasheet (40001817B), giving engineers a faster path from selection to prototype.
Аналоги без доработки для PIC16LF1567-E/P — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC16LF1567-E/P (тот же форм-фактор и посадочное место) — отличается по Package, ADC, Program Memory (Flash), Core Architecture, Operating Temperature.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC16LF1566-I/SP
✅ Прямая замена✓ В наличии
$1.22 / шт.
Открыть даташит →PIC16LF1566-E/SS
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$1.68 / шт.
Открыть даташит →PIC16LF1519-I/P
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$1.99 / шт.
Открыть даташит →PIC16LF1527-E/PT
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$2.92 / шт.
Открыть даташит →PIC16LF1517-I/P
✅ Прямая замена✓ В наличии
$2.18 / шт.
Открыть даташит →PIC16LF1513-I/SS
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$1.85 / шт.
Открыть даташит →PIC16LF1567-E/P Максимальные параметры и электрические характеристики
| Family | PIC® XLP™ 16F |
| Core | PIC16 8-bit RISC |
| Program Memory (Flash) | 14 KB (8K × 14 words) |
| RAM | 1 KB |
| CPU Speed | 32 MHz (8 MIPS) |
| ADC | 2 × 10-bit, up to 34 channels, 600 ksps combined |
| Hardware CVD Module | Yes (automated capacitive voltage divider) |
| PWM Modules | 2 |
| Communication Peripherals | I²C, SPI, EUSART (UART) |
| Timers | Multiple 8/16-bit timers |
| Корпус | 40-pin PDIP (DIP-40, through-hole) |
| Operating Voltage (VDD) | 1.8 V to 3.6 V |
| Рабочая температура | -40 °C to +125 °C (Industrial) |
| Тип монтажа | Through-Hole |
| Статус RoHS | Compliant |
| Уровень MSL | Not applicable (through-hole) |
| XLP (nanoWatt) Low-Power Modes | Yes |
Конфигурация выводов PIC16LF1567-E/P
| Контакт 1 | RA3/AN3/C1IN+/VREF+ — PORTA bit 3 / Analog input 3 / CVD positive input / ADC VREF+ |
| Контакт 2 | RA4/AN4/CVD_TX — PORTA bit 4 / Analog input 4 / CVD transmit |
| Контакт 3 | RA5/AN5/CVD_RX — PORTA bit 5 / Analog input 5 / CVD receive |
| Контакт 4 | RA6/OSC2/CLKOUT — PORTA bit 6 / Crystal oscillator output / Clock out |
| Контакт 5 | RA7/OSC1/CLKIN — PORTA bit 7 / Crystal oscillator input / Clock in |
| Контакт 6 | VDD — Positive supply voltage (1.8 V to 3.6 V) |
| Контакт 7 | VSS — Ground reference |
| Контакт 8 | RB0/AN8/CVD_TX — PORTB bit 0 / Analog input 8 / CVD transmit |
| Контакт 9 | RB1/AN9/CVD_RX — PORTB bit 1 / Analog input 9 / CVD receive |
| Контакт 10 | RB2/AN10/CVD_TX — PORTB bit 2 / Analog input 10 / CVD transmit |
| Контакт 11 | RB3/AN11/CVD_RX — PORTB bit 3 / Analog input 11 / CVD receive |
| Контакт 12 | RB4/AN12 — PORTB bit 4 / Analog input 12 |
| Контакт 13 | RB5/AN13 — PORTB bit 5 / Analog input 13 |
| Контакт 14 | RB6/ICSPCLK — PORTB bit 6 / In-Circuit Serial Programming clock |
| Контакт 15 | RB7/ICSPDAT — PORTB bit 7 / In-Circuit Serial Programming data |
| Контакт 16 | RC0/AN16 — PORTC bit 0 / Analog input 16 |
| Контакт 17 | RC1/AN17 — PORTC bit 1 / Analog input 17 |
| Контакт 18 | RC2/AN18/PWM2 — PORTC bit 2 / Analog input 18 / PWM2 output |
| Контакт 19 | RC3/AN19/PWM1 — PORTC bit 3 / Analog input 19 / PWM1 output |
| Контакт 20 | RC4/AN20 — PORTC bit 4 / Analog input 20 |
| Контакт 21 | RC5/AN21 — PORTC bit 5 / Analog input 21 |
| Контакт 22 | RC6/AN22/TX/CK — PORTC bit 6 / Analog input 22 / EUSART TX / I2C clock |
| Контакт 23 | RC7/AN23/RX/DT — PORTC bit 7 / Analog input 23 / EUSART RX / I2C data |
| Контакт 24 | RD0/AN24 — PORTD bit 0 / Analog input 24 |
| Контакт 25 | RD1/AN25 — PORTD bit 1 / Analog input 25 |
| Контакт 26 | RD2/AN26 — PORTD bit 2 / Analog input 26 |
| Контакт 27 | RD3/AN27 — PORTD bit 3 / Analog input 27 |
| Контакт 28 | RD4/AN28 — PORTD bit 4 / Analog input 28 |
| Контакт 29 | RD5/AN29 — PORTD bit 5 / Analog input 29 |
| Контакт 30 | RD6/AN30 — PORTD bit 6 / Analog input 30 |
| Контакт 31 | RD7/AN31 — PORTD bit 7 / Analog input 31 |
| Контакт 32 | VSS — Ground reference |
| Контакт 33 | VDD — Positive supply voltage (1.8 V to 3.6 V) |
| Контакт 34 | RE0/AN32 — PORTE bit 0 / Analog input 32 |
| Контакт 35 | RE1/AN33 — PORTE bit 1 / Analog input 33 |
| Контакт 36 | RE2/AN34 — PORTE bit 2 / Analog input 34 |
| Контакт 37 | RE3/MCLR/VPP — PORTE bit 3 / Master Clear reset (active low) / Programming voltage |
| Контакт 38 | RA0/AN0/C1IN- — PORTA bit 0 / Analog input 0 / CVD negative input |
| Контакт 39 | RA1/AN1/C1OUT — PORTA bit 1 / Analog input 1 / Comparator 1 output |
| Контакт 40 | RA2/AN2/VREF- — PORTA bit 2 / Analog input 2 / ADC VREF- |
Типичное применение
PIC16LF1567-E/P подходит для 7 применениеs: Capacitive Touch Button Panels (mTouch HMI), Battery-Powered IoT Sensor Nodes, LED Lighting Controllers with Capacitive Dimming, Industrial HMI Panels, Consumer Electronics Front-Panel Interfaces, Automotive Interior Lighting and Switch Panels (non-safety), Smart Home Wall Switches and Dimmers.
Capacitive Touch Button Panels (mTouch HMI)
The PIC16LF1567-E/P is purpose-built for mTouch capacitive touch interfaces, integrating two 10-bit ADCs and a hardware CVD module that drives up to 34 analog channels at 600 ksps combined. This hardware offloads touch-scan timing from the CPU, enabling responsive multi-button panels in appliances, access-control keypads, and industrial HMIs without an external touch controller. Designers pair the MCU with Microchip's free mTouch library, which provides reference firmware for button, slider, and wheel sensing.
Рекомендуется
Battery-Powered IoT Sensor Nodes
With XLP nanoWatt technology and a 1.8 V to 3.6 V VDD range, the PIC16LF1567-E/P is ideal for coin-cell or 2× AA battery-powered wireless sensor nodes. Sleep currents below 1 µA with RTC running extend battery life to multiple years, while 32 MHz active performance (~3 mA at 3.3 V) handles periodic sensor reads and short RF bursts. The 34-channel ADC supports multi-sensor arrays (temperature, humidity, light) on a single MCU, reducing BOM cost.
Рекомендуется
LED Lighting Controllers with Capacitive Dimming
The PIC16LF1567-E/P combines PWM generation with capacitive touch input, enabling touch-controlled dimming interfaces for smart LED drivers. The two PWM modules can drive MOSFET gates directly for high-current LED strings or feed PWM input signals to external constant-current drivers. With hardware CVD handling slider/wheel gestures, designers can replace mechanical rotary dimmers with sealed touch interfaces ideal for outdoor or kitchen lighting.
Рекомендуется
Industrial HMI Panels
Industrial operator panels benefit from the PIC16LF1567-E/P's robust peripheral set: hardware CVD for touch buttons, dual ADC for sensor feedback, EUSART/SPI/I²C for PLC or display communication, and PWM for backlight or indicator control. The -40 °C to +125 °C industrial temperature grade supports deployment in factory-floor enclosures, and the 40-pin PDIP package simplifies through-hole assembly for low-volume industrial products with field-serviceable boards.
Рекомендуется
Consumer Electronics Front-Panel Interfaces
The PIC16LF1567-E/P powers touch-button front panels for coffee makers, microwaves, washing machines, and other white goods where capacitive touch replaces mechanical buttons for sealed, easy-to-clean interfaces. The 14 KB Flash holds touch firmware plus product-specific UI logic, while the 1 KB RAM supports modest display or LED matrix control. The 32 MHz CPU keeps touch latency under 25 ms, providing a responsive user experience.
Рекомендуется
Automotive Interior Lighting and Switch Panels (non-safety)
While the PIC16LF1567-E/P is not AEC-Q100 qualified, it is well suited for non-safety automotive interior applications such as capacitive door-switch panels, ambient lighting controllers, and rear-seat entertainment keypads. The wide operating temperature range handles cabin extremes, and the 1.8 V to 3.6 V VDD supports direct connection to automotive 3.3 V rails. For safety-critical applications like steering-wheel touch, an AEC-Q100 part must be selected.
Рекомендуется
Smart Home Wall Switches and Dimmers
The PIC16LF1567-E/P enables touch-based smart-home wall switches that combine capacitive touch buttons/sliders with optional wireless connectivity (via SPI to a colocated RF module). Its 32 MHz CPU and 14 KB Flash can host simple control logic and a wireless protocol stack, while hardware CVD provides reliable touch sensing through plastic or glass faceplates. Sleep-mode power consumption supports battery-free designs powered by energy harvesting.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC16LF1567-E/P — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC16LF1566-I/SP | PIC16LF1519-I/P | PIC16LF1517-I/P |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | PDIP-40 | PDIP-40 (same) | PDIP-40 (same) | PDIP-40 (same) |
| Program Memory | 14 KB Flash | 28 KB Flash | 28 KB Flash | 14 KB Flash |
| CPU Speed | 32 MHz (8 MIPS) | 32 MHz | 20 MHz | 20 MHz |
| ADC Channels | 34 channels (2 × 10-bit) | 34 channels (2 × 10-bit) | 17 channels (1 × 10-bit) | 24 channels (1 × 10-bit) |
| Hardware CVD Module | Yes | Yes | No | No |
| Operating Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| RAM | 1 KB | 2 KB | 1 KB | 1 KB |
| Unit Price (qty 100) | $2.36 | $2.55 | $2.10 | $2.05 |
Ключевые отличия
- Hardware CVD module with 34 analog channels - offloads touch-scan timing from CPU (против PIC16LF1519-I/P)
- Higher 32 MHz CPU speed vs 20 MHz in PIC16LF1517/PIC16LF1519 family (против PIC16LF1517-I/P)
- Two 10-bit ADC modules vs one in PIC16LF1517/PIC16LF1519 (против PIC16LF1517-I/P)
Заметки по проектированию
Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of each VDD pin (pins 6 and 33 on the 40-pin PDIP). For ADC accuracy and CVD stability, add a bulk 1 µF to 10 µF capacitor adjacent to VDD. The PIC16LF1567-E/P can operate from 1.8 V to 3.6 V, but for optimal ADC linearity keep VDD ≥ 2.4 V or use an external 2.048 V reference on RA3/RA2. Place a ferrite bead or 10 Ω resistor in series with VDD if the supply is shared with switching converters.
Keep CVD trace length below 25 mm and route CVD_TX/CVD_RX pairs symmetrically with ground shielding to minimize parasitic capacitance. Per the Microchip mTouch design guide, maintain a guard trace around each touch electrode connected to a low-impedance analog ground (VSS). Avoid routing digital signals (SPI, PWM) parallel to CVD traces to prevent crosstalk. Place the CVD series resistor (typically 1 kΩ to 10 kΩ) as close to the MCU pin as possible.
Estimated: For a 32 MHz clock at 3.3 V, the PIC16LF1567-E/P active current is approximately 3 mA; at full peripheral load (ADC + CVD scanning + EUSART active), expect 4 mA to 5 mA. Avoid leaving floating ADC pins unconfigured - this wastes current and can inject noise. Configure unused pins as digital outputs driven low. Do not connect MCLR directly to VDD without a pull-up (10 kΩ typical); the ICSP programmer requires MCLR to be driven high for normal operation but pulled low for reset.
The 40-pin PDIP package has a thermal resistance around 50 °C/W (theta_JA) which is adequate for the PIC16LF1567-E/P's typical 3 mA to 5 mA active current (≈15 mW power dissipation). No heatsink is required for standard mTouch or IoT applications. In enclosed industrial enclosures above 60 °C ambient, verify junction temperature using Tj = Ta + (Pd × theta_JA) to ensure it stays below 125 °C. The PDIP package offers better high-temperature margin than QFN packages due to its lead-frame construction.
Информация о соответствии
RoHS compliant per Microchip product page. Industrial temperature grade (-40°C to +125°C). NOT AEC-Q100 qualified - select an automotive-grade part for safety-critical automotive designs.
