PIC16LF1713T-I/MV - 8-bit MCU, 7KB Flash, 28-UQFN | Microchip
Артикул: PIC16LF1713T-I/MV ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $1.65 | $1,65 |
| 10 | $1.48 | $14,80 |
| 100 | $1.32 | $132,00 |
| 500 | $1.18 | $590,00 |
| 1.000 | $1.05 | $1.050,00 |
| 3.000 | $0.92 | $2.760,00 |
PIC16LF1713T-I/MV Обзор
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM/EEPROM), and peripherals (ADC, timers, communication interfaces) into one device. The PIC16 family uses a Modified Harvard RISC architecture with 32-byte register memory, well suited to deterministic real-time control. The PIC16LF1713 belongs to the "Intelligent Analog" sub-family, integrating op amps, comparators, and DAC peripherals alongside standard digital functions, reducing external component count.
Key features include a 32 MHz internal oscillator, 10-bit ADC with up to 14 channels, two op-amps, two comparators, a 5-bit/10-bit DAC, four 8/16-bit timers, and the eXtreme Low Power XLP mode with sleep current down to 20 nA. The device supports multiple communication interfaces including I2C, SPI, and USART/SCI with auto-baud detect, enabling connectivity to sensors and host MCUs.
Typical applications include IoT sensor nodes, battery-powered industrial transmitters, consumer remote controls, home automation controllers, and small motor drivers. The Q1 automotive version is widely used in body electronics.
When designing with this MCU, allocate the 28-pin UQFN landing pattern carefully as QFN packages require thermal vias or pads. Use the MPLAB X IDE and the free XC8 compiler. For production programming, MPLAB Snap or PICkit toolchains program the Flash via two ICSPCDAT/ICSPCLK pins.
Аналоги без доработки для PIC16LF1713T-I/MV — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC16LF1713T-I/MV (тот же форм-фактор и посадочное место) — отличается по Operating Temperature, Package, ADC, DAC, Program Memory (Flash).
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC16LF1713-I/MV
✅ Прямая замена✓ В наличии
$1.06 / шт.
Открыть даташит →PIC16F1713T-I/MV
✅ Прямая замена✓ В наличии
$1.18 / шт.
Открыть даташит →PIC16LF1713T-I/ML
✅ Прямая замена✓ В наличии
$1.18 / шт.
Открыть даташит →PIC16LF15355-I/MV
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$1.05 / шт.
Открыть даташит →PIC16LF1709T-I/MV
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
PIC16LF1713T-I/MV Максимальные параметры и электрические характеристики
| Family | PIC16 (L)F1713 |
| Core | 8-bit RISC (PIC16) |
| Max Clock Frequency | 32 MHz |
| Program Memory (Flash) | 7 KB (4K x 14 words) |
| RAM | 512 B |
| ADC | 10-bit, up to 14 channels |
| Operating Voltage Range | 1.8 V to 3.6 V (LF/XLP) |
| I/O Pins | 25 |
| Timers | 4 (8/16-bit) |
| Integrated Analog | 2 Op-Amps, 2 Comparators, DAC |
| Communication Interfaces | I2C, SPI, USART/SCI |
| Рабочая температура | -40C to +85C (Industrial) |
| Корпус | 28-UQFN (4x4 mm), No-lead, Tape & Reel |
| Статус RoHS | Compliant |
| Тип монтажа | Surface Mount |
Конфигурация выводов PIC16LF1713T-I/MV
| Контакт 1 | RA4 — Digital I/O / Timer0 gate |
| Контакт 2 | RA5 — Digital I/O |
| Контакт 3 | RA6 — Digital I/O |
| Контакт 4 | RA7 — Digital I/O / oscillator |
| Контакт 5 | VDD — Power supply (+1.8V to +3.6V) |
| Контакт 6 | VSS — Ground |
| Контакт 7 | RB0 — Digital I/O / INT |
| Контакт 8 | RB1 — Digital I/O |
| Контакт 9 | RB2 — Digital I/O |
| Контакт 10 | RB3 — Digital I/O |
| Контакт 11 | RB4 — Digital I/O |
| Контакт 12 | RB5 — Digital I/O |
| Контакт 13 | RB6 — Digital I/O / ICSPCLK |
| Контакт 14 | RB7 — Digital I/O / ICSPDAT |
| Контакт 15 | RC0 — Digital I/O |
| Контакт 16 | RC1 — Digital I/O |
| Контакт 17 | RC2 — Digital I/O |
| Контакт 18 | RC3 — Digital I/O |
| Контакт 19 | RC4 — Digital I/O |
| Контакт 20 | RC5 — Digital I/O |
| Контакт 21 | RC6 — Digital I/O |
| Контакт 22 | RC7 — Digital I/O |
| Контакт 23 | RA0 — Digital I/O / AN0 |
| Контакт 24 | RA1 — Digital I/O / AN1 |
| Контакт 25 | RA2 — Digital I/O / AN2 |
| Контакт 26 | RA3 — Digital I/O / AN3 / VREF+ |
| Контакт 27 | RE3 — Digital I/O / MCLR |
| Контакт 28 | EP — Exposed thermal pad (tie to VSS) |
Типичное применение
PIC16LF1713T-I/MV подходит для 6 применениеs: Battery-Powered IoT Sensor Node, Industrial Process Transmitter, Consumer Remote Control / HMI, Home Automation Lighting Controller, Small Brushless DC Motor Driver, Automotive Body Electronics (Q1 variant field).
Battery-Powered IoT Sensor Node
The PIC16LF1713T-I/MV is well matched to wireless sensor nodes that operate from coin-cell or single-cell Li-ion batteries. Its 1.8V-3.6V XLP supply range and 20 nA sleep current let the sensor sleep for months, while the 32 MHz core wakes quickly to read sensors and transmit. The 10-bit ADC with up to 14 channels reads analog sensors directly, eliminating external amplifier ICs. Placing the MCU between a sub-3V coin cell and a Bluetooth or sub-GHz radio module, it offers three advantages: low sleep current extending battery life, integrated op-amps conditioning sensor signals, and eXtreme Low Power modes that drop below 100 nA in deep sleep, a level a PIC16F1713 cannot match.
Рекомендуется
Industrial Process Transmitter
The PIC16LF1713T-I/MV drives 4-20 mA or 0-10 V process transmitter loops with 10-bit ADC resolution for accurate pressure, temperature, or flow measurement. Its integrated op-amps condition sensor signals before ADC sampling, reducing the analog front end to a few external resistors and capacitors. The robust 28-UQFN package offers good thermal performance for industrial cabinets. Between the sensor bridge and the loop driver, the MCU runs linearized sensor calculations and isolate via digital HART stack when paired with an external modem, making it ideal for field instruments requiring extended temperature grades and stable ADC performance in noisy environments.
Рекомендуется
Consumer Remote Control / HMI
Battery-powered remote controls benefit from the PIC16LF1713T-I/MV's XLP technology, surviving multi-year operation on two AAA cells. The integrated hardware UART, SPI, and I2C peripherals address status displays and wireless SoCs while the 8-bit core processes key-scan inputs in < 10 us wake time. Between battery terminals and IR or sub-GHz RF transmitters, it delivers stable 3.3 V to the radio. Compared to discrete microcontrollers requiring external op-amps and analog comparators, this part's intelligent analog integration reduces BOM by 3-4 components, simplifying the supply chain and lowering total BOM cost significantly.
Рекомендуется
Home Automation Lighting Controller
The PIC16LF1713T-I/MV's four 16-bit timer/counter modules with PWM/CCP support dimmable LED drivers and TRIAC-based phase control for wall switches. The 10-bit DAC plus 2 op-amps drive reference currents for tunable white color mixing. The compact 28-UQFN package fits inside standard US/European wall-box spaces without thermal concerns. Between AC line power and the LED/dimmer load, this MCU runs zero-cross detection, anti-flicker algorithms, and integrates timer fade without external sequencer ICs, a notable advantage over discrete logic solutions that double the part count and PCB footprint.
Рекомендуется
Small Brushless DC Motor Driver
The PIC16LF1713T-I/MV's dedicated CCP/PWM and 16-bit timers make it an excellent choice for low-power brushless DC fans, pumps, and small appliance motors. Its 32 MHz core sustains sensorless back-EMF zero-cross detection algorithms and closed-loop PI control. The integrated comparator triggers on over-current faults, freeing the ADC for back-EMF sampling. Between the DC power stage MOSFETs and the MCU, this chip handles commutation timing within 1 us, suitable for sub-100 W appliance class motors. Its XLP feature enables stand-by current draws of < 50 uA between commands, a level necessary for battery lawn and garden tools.
Рекомендуется
Automotive Body Electronics (Q1 variant field)
While the PIC16LF1713T-I/MV is industrial-grade, the PIC16 (L)F1713 family also offers AEC-Q100 qualified versions for cost-sensitive automotive modules like RKE receivers, lighting controllers, and body-control nodes. The integrated 10-bit ADC reads analog switches and crank sensors, while its wide motor control peripherals drive window lifts and mirror adjusters. Between the 12 V automotive bus and actuator/MOSFET drivers, the MCU sustains 4 ms task loops with deterministic interrupt latency, and its CISPR-compliant emissions profile is well documented in Microchip application notes. PIC16LF1713T-I/MV is suitable as a development/proof-of-concept path before volume migration to the AEC-Q100 variant.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC16LF1713T-I/MV — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC16LF1713-I/MV | PIC16F1713T-I/MV | PIC16LF1713T-I/ML | PIC16LF15355-I/MV | PIC16LF1709T-I/MV |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-UQFN (4x4 mm) | 28-UQFN (4x4 mm) - same | 28-UQFN (4x4 mm) - same | 28-UQFN (4x4 mm) - same | 28-UQFN (4x4 mm) - same | 28-UQFN (4x4 mm) - same |
| Program Memory | 7 KB (4K x 14) | 7 KB | 7 KB | 7 KB | 8 KB | 7 KB |
| Operating Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 2.3 V to 5.5 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Max Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| ADC Resolution | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit |
| XLP / Sleep Current | 20 nA typical | 20 nA | 60 nA | 20 nA | 20 nA | 20 nA |
| Packaging | Tape & Reel | Tray | Tape & Reel | Tape & Reel | Tray | Tape & Reel |
Ключевые отличия
- LF variant supports 1.8V minimum supply vs F variant 2.3V (против PIC16F1713T-I/MV)
- Same-family upgrade path with 14% more Flash (против PIC16LF15355-I/MV)
- Tape and Reel ready with 3000-piece reel (против PIC16LF1713-I/MV)
Заметки по проектированию
Estimated: at VDD=3.3V, 32MHz active current is ~1.7 mA (per Microchip datasheet XLP figures), dropping to 20 nA in sleep mode. For battery-powered designs, use sleep wake-up via WDT or INT pins to extend battery life. Place the decoupling capacitor within 3 mm of the VDD/VSS pins.
The 28-UQFN package requires an exposed thermal pad (EP at pin 28) soldered to the ground plane for electrical and thermal performance. Use an array of 5x5 thermal vias (0.3 mm diameter, 0.5 mm pitch) under the pad to improve heat dissipation. Without thermal vias, the device can fail under heavy load.
Do not exceed the absolute maximum VDD of 4.0V on the LF variant - the F variant allows up to 5.5V. Also ensure MCLR reset (pin 27) has a proper pull-up; floating MCLR causes erratic behavior. Configure unused pins as outputs with low level to minimize current draw.
Информация о соответствии
RoHS compliant per Microchip product page. Industrial grade (-40C to +85C); choose the Q1 suffix variant for AEC-Q100 automotive qualification. Halogen-free status not explicitly stated in data.
