PIC16LF1904-E/PT - 8-Bit MCU, 7KB Flash, LCD, nanoWatt XLP | Microchip
Артикул: PIC16LF1904-E/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $2.45 | $2,45 |
| 10 | $2.21 | $22,10 |
| 100 | $1.85 | $185,00 |
| 500 | $1.62 | $810,00 |
| 1.000 | $1.38 | $1.380,00 |
PIC16LF1904-E/PT Обзор
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and a rich set of peripherals (timers, ADC, communications, I/O). The PIC16LF1904 belongs to the broader taxonomy of 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Its on-chip LCD controller with charge pump simplifies direct-drive segment displays in low-power consumer and industrial products, eliminating an external LCD driver.
Key features of the PIC16LF1904 include: 18 general-purpose I/O pins, an integrated LCD driver supporting up to 116 segments, a 10-bit ADC with up to 14 channels, multiple timers (Timer0/1/2), Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), Master I2C/SPI, and nanoWatt XLP sleep current under 30 nA typical. Internal oscillator options up to 16 MHz reduce external component count.
Architecturally, the PIC16LF1904 uses an enhanced mid-range 14-bit instruction set with hardware multiply, providing a favorable MIPS-per-mA balance for battery-powered designs. The wide analog and digital peripheral integration allows it to consolidate functions previously requiring multiple ICs.
Typical applications include battery-powered LCD meters, thermostats, white-goods user interfaces, medical dosing devices, portable instrumentation, IoT sensor nodes, and remote controls. The on-chip LCD driver is a particularly strong fit for any human-machine interface (HMI) display node.
When designing with this part, use the MPLAB X IDE with XC8 compiler; in-circuit debug uses two I/O lines via ICSP. Always include proper decoupling (100 nF + 1 uF) close to VDD pins and follow Microchip AN1267 PCB layout recommendations for the TQFP-44 package.
This page synthesizes distributor pricing, drop-in alternatives (same-brand PIC16LF1904 family variants and qualified same-package options), and practical design notes not found in the bare datasheet, helping engineers shorten the BOM-to-prototype cycle.
Аналоги без доработки для PIC16LF1904-E/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC16LF1904-E/PT (тот же форм-фактор и посадочное место) — отличается по ADC, Operating Temperature, Package, Program Memory (Flash), Low-Power Technology.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC16LF1904-I/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC16LF1906-E/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC16LF1907-E/PT
✅ Прямая замена✓ В наличии
$1.08 / шт.
Открыть даташит →PIC16LF1902-I/SP
✅ Прямая замена✓ В наличии
$1.1 / шт.
Открыть даташит →PIC16LF1904-E/PT Максимальные параметры и электрические характеристики
| Core | PIC16 Enhanced Mid-Range 8-bit CPU |
| Instruction Set Architecture | 14-bit, with hardware multiply |
| Program Memory (Flash) | 7 KB (4K x 14 words) |
| Data SRAM | 256 bytes |
| Maximum CPU Clock | 20 MHz |
| Supply Voltage (VDD) | 2.5 V to 3.6 V |
| I/O Pins | 18 |
| Рабочая температура | -40C to +125C (industrial, E suffix) |
| Корпус | 44-pin TQFP (PT), 10x10 mm, 0.80 mm pitch |
| Integrated LCD Driver | Yes, with charge pump (up to 116 segments typical) |
| ADC | 10-bit, up to 14 channels |
| Timers | Timer0, Timer1, Timer2 |
| Communication Peripherals | EUSART, I2C/SPI Master |
| Low-Power Technology | nanoWatt XLP |
| Уровень MSL | 3 (168 hours) |
| Time at Peak Reflow Temperature | 40 s max |
| Lead Finish | Lead-free (Matte Tin) |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
Конфигурация выводов PIC16LF1904-E/PT
| Контакт 1 | RA0/AN0/C1IN+/C2IN+/SEG12 — GPIO/analog input/comparator input/LCD segment |
| Контакт 2 | RA1/AN1/C1IN-/C2IN-/SEG7 — GPIO/analog input/comparator input/LCD segment |
| Контакт 3 | RA2/AN2/VREF-/COM0 — GPIO/analog input/VREF-/LCD common |
| Контакт 4 | RA3/AN3/VREF+/COM1 — GPIO/analog input/VREF+/LCD common |
| Контакт 5 | RA4/T0CKI/C1OUT/SEG5 — GPIO/Timer0 clock/comparator output/LCD segment |
| Контакт 6 | RA5/AN4/C2OUT/SEG4 — GPIO/analog input/comparator output/LCD segment |
| Контакт 7 | RA6/ICSPCLK — GPIO/ICSP clock |
| Контакт 8 | RA7/ICSPDAT — GPIO/ICSP data |
| Контакт 9 | VDD — Positive supply |
| Контакт 10 | VSS — Ground |
| Контакт 11 | RB0/AN12/INT/SEG0 — GPIO/analog input/external interrupt/LCD segment |
| Контакт 12 | RB1/AN10/C1IN3-/SEG1 — GPIO/analog input/comparator input/LCD segment |
| Контакт 13 | RB2/AN8/C1IN2-/SEG2 — GPIO/analog input/comparator input/LCD segment |
| Контакт 14 | RB3/AN9/C1IN1-/SEG3 — GPIO/analog input/comparator input/LCD segment |
| Контакт 15 | RB4/AN11/SEG6 — GPIO/analog input/LCD segment |
| Контакт 16 | RB5/SEG8 — GPIO/LCD segment |
| Контакт 17 | RB6/SEG9 — GPIO/LCD segment |
| Контакт 18 | RB7/SEG10 — GPIO/LCD segment |
| Контакт 19 | RC0/SOSCO/T1CKI/SEG21 — GPIO/secondary oscillator/Timer1 clock/LCD segment |
| Контакт 20 | RC1/SOSCI/SEG22 — GPIO/secondary oscillator/LCD segment |
| Контакт 21 | RC2/AN13/SEG23 — GPIO/analog input/LCD segment |
| Контакт 22 | RC3/AN7/SEG24 — GPIO/analog input/LCD segment |
| Контакт 23 | RC4/AN6/SEG25 — GPIO/analog input/LCD segment |
| Контакт 24 | RC5/AN5/SEG26 — GPIO/analog input/LCD segment |
| Контакт 25 | RC6/AN18/SEG27 — GPIO/analog input/LCD segment |
| Контакт 26 | RC7/AN19/SEG28 — GPIO/analog input/LCD segment |
| Контакт 27 | RD0/COM2 — GPIO/LCD common |
| Контакт 28 | RD1/COM3 — GPIO/LCD common |
| Контакт 29 | RD2/SEG29 — GPIO/LCD segment |
| Контакт 30 | RD3/SEG30 — GPIO/LCD segment |
| Контакт 31 | RD4/SEG31 — GPIO/LCD segment |
| Контакт 32 | RD5/SEG32 — GPIO/LCD segment |
| Контакт 33 | RD6/SEG33 — GPIO/LCD segment |
| Контакт 34 | RD7/SEG34 — GPIO/LCD segment |
| Контакт 35 | RE0/AN5/SEG35 — GPIO/analog input/LCD segment |
| Контакт 36 | RE1/AN6/SEG36 — GPIO/analog input/LCD segment |
| Контакт 37 | RE2/AN7/SEG37 — GPIO/analog input/LCD segment |
| Контакт 38 | RE3/MCLR/VPP — GPIO/master clear/programming voltage |
| Контакт 39 | VDD — Positive supply |
| Контакт 40 | VSS — Ground |
| Контакт 41 | RF0/SEG38 — GPIO/LCD segment |
| Контакт 42 | RF1/SEG39 — GPIO/LCD segment |
| Контакт 43 | RF2/SEG40 — GPIO/LCD segment |
| Контакт 44 | RF3/SEG41 — GPIO/LCD segment |
Типичное применение
PIC16LF1904-E/PT подходит для 6 применениеs: Battery-Powered LCD Thermostat, Portable Medical Dosing Device, Smart Energy Meter / Sub-metering, Industrial Sensor Node / IoT Edge, White-Goods User Interface Board, Remote Control / Handheld HMI.
Battery-Powered LCD Thermostat
The PIC16LF1904-E/PT is exceptionally well suited to battery-powered thermostat designs because of three converging features: its integrated LCD segment driver with charge pump eliminates an external LCD controller IC, its 2.5-3.6 V VDD range matches two-AA alkaline cells directly, and its nanoWatt XLP technology drives sleep current to under 30 nA typical. A thermostat typically needs 10-20 segments for temperature and mode display; the LF1904's >116-segment headroom leaves room for additional UI elements. The 7 KB Flash accommodates PID control logic, hysteresis state machines, and BLE/wifi-stack glue code. The E temperature grade supports outdoor HVAC enclosures.
Рекомендуется
Portable Medical Dosing Device
Portable medical dosing pumps and inhalers benefit from the PIC16LF1904-E/PT's nanoWatt XLP sleep modes, integrated 10-bit ADC for sensor readout, and 256 B SRAM for transient state storage. The LCD driver with charge pump can drive a small segment display showing dose count, remaining battery, and warning icons directly from 3 V without a boost converter. The industrial -40C to +125C temperature grade supports refrigeration storage of pharmaceuticals. The 18 GPIO can interface buttons, motor drivers, and reed sensors while keeping the BOM under ten external components.
Рекомендуется
Smart Energy Meter / Sub-metering
Single-phase residential smart energy meters frequently use PIC16LF1904-E/PT derivatives because the on-chip LCD driver directly displays kWh and instantaneous power on a segment LCD, the 10-bit ADC samples current-transformer and shunt outputs, and the EUSART links to a metrology AFE or PLC modem. The 2.5-3.6 V range aligns with auxiliary supplies in energy-harvesting designs. The 7 KB Flash stores tariff tables and tamper flags. The same LCD driver supports both 7-segment numeric and 14-segment alphanumeric overlays for multi-currency displays.
Рекомендуется
Industrial Sensor Node / IoT Edge
For wired industrial sensor nodes (4-20 mA loops, Modbus RTU slaves, HVAC transmitters), the PIC16LF1904-E/PT provides the right balance of peripherals: EUSART for RS-485, I2C for digital sensors, 10-bit ADC for analog inputs, and 18 GPIO for control outputs. The LCD driver is useful for local-loop display readouts on field-mountable transmitters. nanoWatt XLP allows loop-powered operation with a 3 V LDO downstream of the 4-20 mA sense resistor. The E temperature grade supports outdoor and cabinet environments with limited thermal management.
Рекомендуется
White-Goods User Interface Board
Washing machines, dishwashers, and ovens use the PIC16LF1904-E/PT for user-interface boards that drive segment LCDs, read capacitive or mechanical buttons, control buzzers and relays, and supervise the main appliance controller via UART. The integrated LCD driver with charge pump eliminates a separate display IC; the 18 GPIO covers 16-segment icons plus 4-6 buttons and buzzer. The 7 KB Flash stores wash-cycle profiles, error history, and capacitive-touch firmware. The E temperature grade supports behind-the-panel locations adjacent to heating elements.
Рекомендуется
Remote Control / Handheld HMI
Universal remote controls, security keypads, and point-of-sale terminals benefit from the PIC16LF1904-E/PT's ultra-low sleep current (enables coin-cell operation), integrated LCD driver for status displays, and EUSART for IR or BLE module communication. The 20 MHz CPU clock decodes RC5/RC6/SIRC IR protocols in real time without DMA. The E temperature grade supports outdoor keypads and vehicle-mounted terminals.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC16LF1904-E/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC16LF1904-I/PT | PIC16LF1906-E/PT | PIC16LF1907-E/PT | PIC16LF1902-I/SP |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-TQFP (10x10 mm) | 44-TQFP - same | 44-TQFP - same | 44-TQFP - same | 28-SPDIP - different |
| Flash Memory | 7 KB | 7 KB (same) | 14 KB (+100%) | 14 KB (+100%) | 4 KB (-43%) |
| SRAM | 256 B | 256 B (same) | 512 B (+100%) | 1024 B (+300%) | 128 B (-50%) |
| Operating Voltage | 2.5 V to 3.6 V | 2.5 V to 3.6 V | 2.5 V to 3.6 V | 2.5 V to 3.6 V | 2.5 V to 3.6 V |
| Temperature Grade | -40C to +125C (E) | -40C to +85C (I) | -40C to +125C (E) | -40C to +125C (E) | -40C to +85C (I) |
| LCD Driver | Yes, with charge pump | Yes, with charge pump | Yes, with charge pump | Yes, with charge pump | Yes, with charge pump |
| ADC | 10-bit, up to 14 ch | 10-bit (same) | 10-bit (same) | 10-bit (same) | 10-bit, fewer channels |
| Unit Price (qty 1, as of 2026-09-25) | $2.45 | $2.40 approx | $2.65 approx | $2.85 approx | $2.10 approx |
Ключевые отличия
- Industrial temperature grade -40C to +125C in same TQFP-44 footprint (против PIC16LF1904-I/PT)
- 2x Flash for firmware growth (против PIC16LF1904-I/PT)
- Integrated LCD driver with charge pump (против PIC16F727-I/P)
Заметки по проектированию
The PIC16LF1904-E/PT operates from 2.5-3.6 V; for two-AA alkaline cells (2.0-3.2 V under load) use a low-Iq LDO such as MCP1700. Decouple VDD with 100 nF plus 1 uF ceramic placed within 5 mm of both VDD pins (9 and 39). Tie unused VDD pins to VDD, never leave floating. Use Sleep mode with internal LFINTOSC and disable unused peripherals via PMD registers to reach nanoWatt XLP sleep current.
At 20 MHz the LF1904 draws approximately 6-8 mA active; the 44-TQFP package thermal resistance theta_JA is roughly 50 C/W on a 2-layer JEDEC EIA/JESD51 board. For the E temperature grade (-40C to +125C) no heatsink is required, but at high ambient (>85C) consider reducing clock to 4 MHz to lower die temperature. A 4-layer PCB reduces theta_JA by 30%.
The 44-TQFP (PT) package uses 0.80 mm pitch; follow Microchip AN1267 (PCB Design Considerations) for trace width/spacing. Provide a continuous ground pour under the IC. Keep the ICSP lines (RA6/RA7) accessible for in-circuit debug; add a 2x5 0.05" header if space permits. The LCD segment pins route to the display connector - keep these traces short and parallel for uniform segment contrast.
Do not connect MCLR/RE3 directly to VDD without a pull-up; floating MCLR can cause spurious resets. Always configure unused GPIO as outputs (low) to minimize current draw. When using the LCD charge pump, follow the datasheet's external capacitor values (typically 1 uF on VLCD pins) and sequence the charge-pump enable after VDD stabilizes. Programming voltage on MCLR must be observed for ICSP.
Информация о соответствии
RoHS compliant per Microchip product page; lead-free matte-tin finish; not AEC-Q100 qualified (industrial -E grade only). Halogen-free status not explicitly stated in retrieved data - verify with Microchip environmental documentation.
