PIC16LF874-04/PQ - 8-bit 4MHz Flash MCU, 7KB, 44-MQFP | Microchip
Артикул: PIC16LF874-04/PQ ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $8.97 | $8,97 |
| 10 | $8.07 | $80,70 |
| 100 | $6.84 | $684,00 |
| 500 | $6.2 | $3.100,00 |
| 1.000 | $5.55 | $5.550,00 |
PIC16LF874-04/PQ Обзор
What is a PIC16 microcontroller? A PIC16 is an 8-bit RISC microcontroller from Microchip Technology based on the PIC16 family of cores, sitting in the hierarchy: PIC16 -> 8-bit MCU -> microcontroller -> embedded IC -> semiconductor. The 'LF' prefix denotes the low-voltage, low-power process variant, while the family integrates Flash program memory, on-chip RAM, EEPROM, timers, capture/compare/PWM, an A/D converter, and several serial peripherals on a single die.
Key features of this part include 7KB Flash (organized as 4K x 14 single-word instructions), 192 bytes of general-purpose RAM, 128 bytes of EEPROM data memory, 33 I/O pins, a 10-bit multi-channel A/D converter, enhanced Capture/Compare/PWM modules, USART, SPI, and I2C. The 04 speed grade means a 4 MHz maximum oscillator frequency, and the I grade variant extends the operating temperature from -40C to +85C.
Architecturally, the PIC16F874 employs a 14-bit instruction word RISC core with a single accumulator (WREG), a hardware multiplier is not present in this sub-family, and Harvard-style separate program and data buses. The wide 5.5 V supply tolerance simplifies designs that must interface with 5 V sensors, LED drivers, or industrial logic.
Typical applications include industrial control panels, sensor interface boards, motor-control signal conditioning, automotive body electronics (non-safety), low-cost consumer appliances, and legacy embedded-system upgrades where 5 V tolerance and an industry-standard 8-bit MCU are required. Designers use it wherever simple deterministic control, low current draw, and abundant code space for state machines outpace the need for computation.
When designing with this part, ensure decoupling of VDD with 100 nF and bulk caps placed within 5 mm of each supply pin, and verify MCLR routing for clean reset behavior. Always check the device errata for revisions affecting the A/D, USART, or oscillator blocks before committing to a board revision.
Аналоги без доработки для PIC16LF874-04/PQ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC16LF874-04/PQ (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, Program Memory Size, Core Architecture, Timers.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC16F874-04/PQ
✅ Прямая замена✓ В наличии
$5.9 / шт.
Открыть даташит →PIC16F874-04I/PQ
✅ Прямая замена✓ В наличии
$5.78 / шт.
Открыть даташит →PIC16LF874-04I/PQ
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC16LF874AT-I/PT
✅ Прямая замена✓ В наличии
$4.05 / шт.
Открыть даташит →PIC16F874A-I/PQ
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC16LF874-04/PQ Максимальные параметры и электрические характеристики
| Core | PIC16 8-bit RISC |
| Program Memory Type | Flash |
| Program Memory Size | 7 KB (4K x 14 instructions) |
| RAM Size | 192 bytes |
| EEPROM Size | 128 bytes |
| Максимальная тактовая частота | 4 MHz |
| Speed Grade | 04 (4 MHz) |
| Разрядность шины данных | 8-bit |
| Number of I/O Pins | 33 |
| Supply Voltage Range | 2.0 V to 5.5 V |
| Диапазон рабочих температур | -40 C to +85 C |
| A/D Converter | 10-bit, 8 channels |
| Корпус | MQFP-44 (PQ) 10x10 mm |
| Тип монтажа | Surface Mount |
| Oscillator Type | External crystal/oscillator or internal |
| Peripherals | USART, SPI, I2C, CCP, timers |
| Статус RoHS | Compliant |
| Lead-Free | Yes |
Конфигурация выводов PIC16LF874-04/PQ
| Контакт 1 | MCLR/VPP/RE3 — Master Clear reset input or programming high voltage; input-only |
| Контакт 2 | RA0/AN0 — PORTA bit 0; analog input 0 |
| Контакт 3 | RA1/AN1 — PORTA bit 1; analog input 1 |
| Контакт 4 | RA2/AN2/VREF- — PORTA bit 2; analog input 2 or VREF- |
| Контакт 5 | RA3/AN3/VREF+ — PORTA bit 3; analog input 3 or VREF+ |
| Контакт 6 | RA4/T0CKI — PORTA bit 4; Timer0 clock input (open-drain) |
| Контакт 7 | RA5/AN4/SS — PORTA bit 5; analog input 4; SPI slave select |
| Контакт 8 | VSS — Ground |
| Контакт 9 | OSC1/CLKIN — Oscillator crystal input or external clock |
| Контакт 10 | OSC2/CLKOUT — Oscillator crystal output or clock out |
| Контакт 11 | RC0/T1OSO/T1CKI — PORTC bit 0; Timer1 oscillator output or clock input |
| Контакт 12 | RC1/T1OSI/CCP2 — PORTC bit 1; Timer1 oscillator input; Capture/Compare/PWM2 |
| Контакт 13 | RC2/CCP1 — PORTC bit 2; Capture/Compare/PWM1 |
| Контакт 14 | RC3/SCK/SCL — PORTC bit 3; SPI clock or I2C clock |
| Контакт 15 | RC4/SDI/SDA — PORTC bit 4; SPI data in or I2C data |
| Контакт 16 | RC5/SDO — PORTC bit 5; SPI data out |
| Контакт 17 | RC6/TX/CK — PORTC bit 6; USART transmit or clock |
| Контакт 18 | RC7/RX/DT — PORTC bit 7; USART receive or data |
| Контакт 19 | VSS — Ground |
| Контакт 20 | VDD — Positive supply |
| Контакт 21 | RB0/INT — PORTB bit 0; external interrupt |
| Контакт 22 | RB1 — PORTB bit 1 |
| Контакт 23 | RB2 — PORTB bit 2 |
| Контакт 24 | RB3/PGM — PORTB bit 3; low-voltage ICSP programming |
| Контакт 25 | RB4 — PORTB bit 4 |
| Контакт 26 | RB5 — PORTB bit 5 |
| Контакт 27 | RB6/PGC — PORTB bit 6; ICSP clock |
| Контакт 28 | RB7/PGD — PORTB bit 7; ICSP data |
| Контакт 29 | VSS — Ground |
| Контакт 30 | VDD — Positive supply |
| Контакт 31 | RE0/RD/AN5 — PORTE bit 0; parallel slave port read; analog input 5 |
| Контакт 32 | RE1/WR/AN6 — PORTE bit 1; parallel slave port write; analog input 6 |
| Контакт 33 | RE2/CS/AN7 — PORTE bit 2; parallel slave port chip select; analog input 7 |
| Контакт 34 | VSS — Ground |
| Контакт 35 | VDD — Positive supply |
| Контакт 36 | RD0 — PORTD bit 0; parallel slave port data bit |
| Контакт 37 | RD1 — PORTD bit 1; parallel slave port data bit |
| Контакт 38 | RD2 — PORTD bit 2; parallel slave port data bit |
| Контакт 39 | RD3 — PORTD bit 3; parallel slave port data bit |
| Контакт 40 | RD4 — PORTD bit 4; parallel slave port data bit |
| Контакт 41 | RD5 — PORTD bit 5; parallel slave port data bit |
| Контакт 42 | RD6 — PORTD bit 6; parallel slave port data bit |
| Контакт 43 | RD7 — PORTD bit 7; parallel slave port data bit |
| Контакт 44 | VSS — Ground |
Типичное применение
PIC16LF874-04/PQ подходит для 6 применениеs: Industrial Control Panel HMI, Sensor Interface and Data Acquisition Board, Low-Cost Consumer Appliance Controller, Automotive Body and Accessory Electronics, Motor Drive Signal Conditioning and PWM, Legacy Embedded System Repair and Field Replacement.
Industrial Control Panel HMI
The PIC16LF874-04/PQ fits industrial control panel HMI boards because its 33 I/O pins can drive multiplexed 4x4 keypads, seven-segment LED digits, and indicator arrays simultaneously without external logic. The 7KB Flash accommodates state machines for menu navigation, fault logging, and Modbus RTU framing, while 192 bytes of SRAM suffices for runtime buffer space. With 2.0V-5.5V supply range and 10-bit A/D, the part reads 4-20mA loop signals or potentiometer inputs directly. Estimated: at 4MHz clock and 5V supply, the part draws roughly 2mA active, allowing it to run directly from PLC-style 24V rails via a simple linear regulator. Compared to PIC18 alternatives, the PIC16LF874 keeps the BOM cost low while delivering deterministic interrupt response for keyboard scanning.
Рекомендуется
Sensor Interface and Data Acquisition Board
For multi-sensor data acquisition front ends, the PIC16LF874-04/PQ's 10-bit A/D with up to 8 input channels digitizes thermocouple, RTD, or strain-gauge amplifier outputs in parallel. The 4MHz MIPS throughput provides 1µs instruction cycle which, combined with on-chip timers, can average and oversample signals to deliver 12-bit effective resolution. With 128 bytes of EEPROM and 192 bytes SRAM, the part stores calibration tables and run-time samples without external memory. The 5.5 V tolerant I/O interfaces legacy 5 V analog front ends. Compared to a discrete op-amp + ADC + MCU implementation, the PIC16LF874 integrates everything on one die, reducing PCB area to roughly 25x25mm and BOM count by 3 components.
Рекомендуется
Low-Cost Consumer Appliance Controller
The PIC16LF874-04/PQ controls consumer appliances such as coffee makers, rice cookers, and clothes irons because its Flash-based program memory simplifies late-stage firmware updates and its 2.0V-5.5V supply accepts the unregulated rectified AC adapter output directly via a shunt regulator. The CCP module generates the PWM for heating-element control, while the 10-bit A/D senses temperature through an NTC thermistor. With 33 I/O pins the part drives 7-segment displays, switches, and triac interface optocouplers. Estimated BOM savings against equivalent PIC18 designs: roughly $0.40-0.60 per unit at 1000 qty. The part's mature 8-bit PIC tool chain means existing firmware libraries from legacy small-appliance designs port with minimal rework.
Рекомендуется
Automotive Body and Accessory Electronics
For non-safety automotive body modules such as seat controllers, mirror adjusters, or interior lighting, the PIC16LF874-04/PQ in its 'I' industrial temperature variant supports underhood thermal environments from -40C to +85C. The 33 I/O pins drive multiple LEDs, motor bridges, and LIN-bus transceivers, while the capture modules measure rotary encoders for mirror positioning. Voltage tolerance up to 5.5V eases direct connection to 12V nominal buses through a 7805 LDO. According to industry guidance, this part is suitable for body electronics but NOT for safety-critical airbags, ABS, or ADAS - those require AEC-Q100 qualified parts. Compared with newer PIC18F family devices, the PIC16F874 has a long field track record in automotive designs, simplifying PPAP documentation.
Рекомендуется
Motor Drive Signal Conditioning and PWM
The PIC16LF874-04/PQ is widely deployed as a motor-control pre-processor that converts analog throttle or tachometer signals into PWM and direction commands for downstream gate drivers. Its CCP and enhanced CCP modules generate complementary PWM with programmable dead-band for 3-phase inverter-like signaling. The 4MHz MIPS rate easily handles hall-sensor decoding and 10-bit A/D sampling of current-sense amplifiers. With 33 I/O, the part interfaces quadrature encoders directly. Estimated propagation delay from sensor edge to PWM update is roughly 5µs, well within 1ms servo loop budgets. Compared to dedicated motor-control ICs, the PIC16LF874 provides application flexibility: designers can customize commutation profiles without mask-ROM commitments.
Рекомендуется
Legacy Embedded System Repair and Field Replacement
Field-repair and end-of-life support is a major use case for the PIC16LF874-04/PQ because tens of thousands of legacy industrial and medical instruments still rely on its 7KB Flash and 33-I/O configuration. Service technicians specify this part to maintain operational certification on existing equipment rather than recertifying newer PIC18/PIC24 designs - a costly, time-consuming process. The standard 44-MQFP package and Microchip's long-term continuity program mean replacement parts are available from major distributors. According to Microchip's NRND notice, distributors will continue to stock the part for several years but new designs should migrate to PIC16F874A or PIC16F887. The part's simplicity also makes it ideal for rapid prototyping of state-machine code in educational and maker contexts.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC16LF874-04/PQ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC16F874-04/PQ | PIC16F874-04I/PQ | PIC16LF874-04I/PQ | PIC16LF874AT-I/PT | PIC16F874A-I/PQ |
|---|---|---|---|---|---|---|
| Package | MQFP-44 (PQ) | MQFP-44 (PQ) | MQFP-44 (PQ) | MQFP-44 (PQ) | TQFP-44 (PT) | MQFP-44 (PQ) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Max Clock Frequency | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 20 MHz | 20 MHz |
| Supply Voltage Range | 2.0 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| Operating Temperature | 0 C to +70 C | 0 C to +70 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| Flash Program Memory | 7 KB | 7 KB | 7 KB | 7 KB | 7 KB | 7 KB |
| Number of I/O Pins | 33 | 33 | 33 | 33 | 33 | 33 |
| Lifecycle Status | NRND | NRND | NRND | NRND | Active | Active |
Ключевые отличия
- Wide 2.0V-5.5V supply without regulator (против PIC16F874-04/PQ)
- 44-MQFP 10x10mm - true SMT (против PIC16LF874A-I/SP (40-pin DIP))
- 33 I/O for its class (против PIC16F873 (28 I/O))
- 192 bytes SRAM - sufficient for state machines (против PIC12F675 (64 bytes SRAM))
Заметки по проектированию
Estimated: the PIC16LF874-04/PQ at 4 MHz and 5 V draws roughly 2 mA active, dissipating ~10 mW - well below the 1 W plastic MQFP-44 thermal limit. In hermetically sealed industrial enclosures with no airflow, ensure ambient stays within 0-70 C for the standard part or upgrade to the 'I' industrial variant for -40 to +85 C operation. Always derate by 25 C below absolute max for reliable long-term operation.
Place 100 nF decoupling capacitors on every VDD pin (pins 20, 30, 35) within 5 mm trace length to ground. VSS pins (8, 19, 29, 34, 44) should all connect to a common ground plane, not separate traces. Use a star-ground topology if analog ground (AGND, associated with PORTA/PORTE analog inputs) is needed for sensitive A/D measurements. Place the ICSP header near the MCU to keep programming cable leads short.
Common pitfalls with the PIC16LF874-04/PQ include: (1) forgetting to disable the watchdog timer in __CONFIG settings when not using it; (2) misconfiguring the oscillator mode HS vs XT vs LP, which causes erratic startup; (3) neglecting the MCLR pin pull-up, which can cause spurious resets from noise; (4) overwriting EEPROM without first erasing the row; (5) operating RA4 (open-drain) without a pull-up. Carefully review the device errata (DS80233) for A/D and CCP1 issues before committing to a board revision.
The PIC16LF874-04/PQ's I/O pins have a maximum toggle rate of about 5 MHz, and at 4 MHz CPU clock the synchronous port read/write instructions complete in one cycle. For high-speed SPI above 2 MHz, use the dedicated MSSP-style peripheral initialization sequence and avoid software bit-bang. Place a 47 ohm source-impedance matching resistor on the MCLR pin if it is long-traced to reduce noise sensitivity.
Информация о соответствии
RoHS, REACH, and conflict-minerals compliance per Microchip product page. Standard part operates 0 to +70 C; for AEC-Q100 style automotive, use PIC16LF874-04I/PQ (industrial) which extends range to -40 to +85 C.
