PIC18F45K22-I/P - 8-Bit 64MHz MCU 32KB Flash 40-PDIP | Microchip
Артикул: PIC18F45K22-I/P ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $3.84 | $3,84 |
| 10 | $3.45 | $34,50 |
| 100 | $2.96 | $296,00 |
| 500 | $2.62 | $1.310,00 |
| 1.000 | $2.34 | $2.340,00 |
| 3.000 | $2.1 | $6.300,00 |
PIC18F45K22-I/P Обзор
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, RAM, non-volatile program memory, and peripherals onto one piece of silicon. PIC microcontrollers use a modified Harvard architecture with separate program and data buses, executed from Flash memory and SRAM respectively. The PIC18 family sits at the top of Microchip's 8-bit portfolio, offering the highest code density and richest peripheral set within the 8-bit line, and is widely used where deterministic real-time response and low sleep current are required.
Key features of the PIC18F45K22 include eXtreme Low-Power (XLP) nanoWatt sleep modes with currents in the nanoamp range, multiple serial interfaces (UART, SPI, I2C), Enhanced Capture/Compare/PWM (ECCP) modules, comparators, and a 12-bit ADC. The 64 MHz internal oscillator eliminates an external crystal in many designs, and the 40-pin PDIP package supports breadboard and through-hole prototyping, making the part popular in industrial control, instrumentation, and educational applications.
The architecture combines an 8-bit data path with a 16-bit instruction word, providing orthogonal addressing and a hardware multiplier that accelerates arithmetic. The 12-bit ADC with acquisition timer and automatic channel scanning enables precision sensor interfacing, while the PWM modules support motor control and power-conversion loops. Internal EEPROM supports non-volatile data storage without external memory chips.
Typical applications include industrial sensor interfaces, low-power remote sensor nodes, HVAC and building-control nodes, motor-control front-ends, USB HID peripherals (paired with a USB transceiver), and educational development platforms. The wide 4.2-5.5 V supply range is well-matched to 5 V industrial buses and battery-backed systems.
When designing with this part, choose the appropriate oscillator mode for your EMI and accuracy budget; internal 16 MHz or 64 MHz operation removes a crystal but trades frequency precision. The 40-pin PDIP footprint is identical to the PIC18F452 / PIC18F4550 family, easing migration. Decouple VDD with 100 nF plus 10 uF bulk capacitors and follow Microchip's emulator/debugger pin assignments when using MPLAB tools.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet.
Аналоги без доработки для PIC18F45K22-I/P — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC18F45K22-I/P (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, ADC, Timers, Core Architecture.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC18F46K22-I/P
✅ Прямая замена✓ В наличии
$2.61 / шт.
Открыть даташит →PIC18F44K22-I/P
✅ Прямая замена✓ В наличии
$1.36 / шт.
Открыть даташит →PIC18F45K22-E/P
✅ Прямая замена✓ В наличии
$2.78 / шт.
Открыть даташит →PIC18F452-I/P
✅ Прямая замена✓ В наличии
$5.1 / шт.
Открыть даташит →PIC18F4520-I/P
✅ Прямая замена✓ В наличии
$5.35 / шт.
Открыть даташит →PIC18F4550-I/PT
✅ Прямая замена✓ В наличии
$4.95 / шт.
Открыть даташит →PIC18F458-I/P
✅ Прямая замена✓ В наличии
$7.45 / шт.
Открыть даташит →PIC18F45K22-I/P Максимальные параметры и электрические характеристики
| Core | PIC18 (8-bit) |
| CPU Speed | 64 MHz (16 MIPS) |
| Program Memory | 32 KB Flash (16K x 16) |
| Data SRAM | 1536 bytes |
| Data EEPROM | 256 bytes |
| I/O Pins | 36 |
| ADC | 12-bit, up to 28 channels |
| Напряжение питания | 4.2 V to 5.5 V |
| Рабочая температура | -40C to +85C (Industrial) |
| Корпус | 40-pin PDIP (DIP-40) |
| Тип монтажа | Through-Hole |
| Oscillator | Internal 16 MHz / 64 MHz + external crystal |
| Timers | 4 x 8-bit / 16-bit |
| UART | 2 |
| SPI | 2 |
| I2C | 2 (MSSP) |
| PWM Channels | Up to 5 (ECCP + CCP) |
| Comparators | 2 |
| XLP nanoWatt | Yes (down to nA sleep currents) |
| Уровень MSL | 1 (unlimited floor life, through-hole) |
| Статус RoHS | Compliant (lead-free matte-tin pins) |
Конфигурация выводов PIC18F45K22-I/P
| Контакт 1 | MCLR/RE3 — Master Clear (reset) input or digital input RE3 |
| Контакт 2 | RA0 — PORTA digital I/O / AN0 analog input |
| Контакт 3 | RA1 — PORTA digital I/O / AN1 analog input |
| Контакт 4 | RA2 — PORTA digital I/O / AN2 analog input / VREF- |
| Контакт 5 | RA3 — PORTA digital I/O / AN3 analog input / VREF+ |
| Контакт 6 | RA4 — PORTA digital I/O / AN4 / T0CKI |
| Контакт 7 | RA5 — PORTA digital I/O / AN5 / HLVDIN |
| Контакт 8 | RE0 — PORTE digital I/O / AN6 / RD |
| Контакт 9 | RE1 — PORTE digital I/O / AN7 / WR |
| Контакт 10 | RE2 — PORTE digital I/O / AN8 / CS |
| Контакт 11 | VDD — Positive supply (4.2-5.5 V) |
| Контакт 12 | VSS — Ground reference |
| Контакт 13 | OSC1/CLKI/RA7 — Crystal input or external clock / GPIO |
| Контакт 14 | OSC2/CLKO/RA6 — Crystal output or clock output / GPIO |
| Контакт 15 | RC0 — PORTC digital I/O / AN16 / T3CKI |
| Контакт 16 | RC1 — PORTC digital I/O / AN17 / CCP2 |
| Контакт 17 | RC2 — PORTC digital I/O / AN18 / CCP1 |
| Контакт 18 | RC3 — PORTC digital I/O / AN19 / SCL1 |
| Контакт 19 | RD0 — PORTD digital I/O / PSP0 |
| Контакт 20 | RD1 — PORTD digital I/O / PSP1 |
| Контакт 21 | RD2 — PORTD digital I/O / PSP2 |
| Контакт 22 | RD3 — PORTD digital I/O / PSP3 |
| Контакт 23 | RC4 — PORTC digital I/O / SDA1 / SDI1 |
| Контакт 24 | RC5 — PORTC digital I/O / SDO1 |
| Контакт 25 | RC6 — PORTC digital I/O / TX1 / CK1 |
| Контакт 26 | RC7 — PORTC digital I/O / RX1 / DT1 |
| Контакт 27 | RD4 — PORTD digital I/O / PSP4 / SDO2 |
| Контакт 28 | RD5 — PORTD digital I/O / PSP5 / SDI2 |
| Контакт 29 | RD6 — PORTD digital I/O / PSP6 / TX2 / CK2 |
| Контакт 30 | RD7 — PORTD digital I/O / PSP7 / RX2 / DT2 |
| Контакт 31 | VSS — Ground reference |
| Контакт 32 | VDD — Positive supply (4.2-5.5 V) |
| Контакт 33 | RB0 — PORTB digital I/O / INT0 / AN10 / CCP4 |
| Контакт 34 | RB1 — PORTB digital I/O / INT1 / AN8 / CCP5 |
| Контакт 35 | RB2 — PORTB digital I/O / INT2 / AN9 |
| Контакт 36 | RB3 — PORTB digital I/O / INT3 / AN11 / CCP2 |
| Контакт 37 | RB4 — PORTB digital I/O / AN12 / KBI0 |
| Контакт 38 | RB5 — PORTB digital I/O / AN13 / KBI1 / PGM |
| Контакт 39 | RB6 — PORTB digital I/O / KBI2 / PGC (ICSP clock) |
| Контакт 40 | RB7 — PORTB digital I/O / KBI3 / PGD (ICSP data) |
Типичное применение
PIC18F45K22-I/P подходит для 7 применениеs: Industrial Sensor Interface Module, HVAC Building-Control Node, Low-Power Remote Sensor Node, Educational Development Platform, Motor-Control Front-End, USB HID Peripheral (with FTDI bridge), Appliance Control Board.
Industrial Sensor Interface Module
The PIC18F45K22-I/P fits industrial 4-20 mA and 0-10 V sensor-interface modules because its 12-bit ADC with up to 28 channels provides the resolution needed for precision RTD, thermocouple, and bridge-sensor conditioning. The 4.2-5.5 V supply range aligns directly with 5 V industrial rails, while the nanoWatt XLP sleep currents in the nanoamp range enable battery-backed or energy-harvested remote nodes. Designers typically route each ADC channel through an external op-amp front end and use the integrated EEPROM for calibration constants. Compared with newer PIC18F45Q10 designs, the K22 still wins where mature MPLAB X and XC8 toolchains are mandated.
Рекомендуется
HVAC Building-Control Node
In HVAC and building-automation nodes, the PIC18F45K22-I/P drives temperature, humidity, and airflow sensors while managing relays and triac outputs for damper and valve actuation. Its 64 MHz CPU handles BACnet or Modbus stack parsing with headroom, and the multiple UART channels bridge to RS-485 transceivers such as the MAX485 for fieldbus communications. The 36 I/O pins comfortably drive local keypads, LCDs, and status LEDs without external expanders. Its industrial temperature grade and proven XLP sleep modes support 24/7 operation in unconditioned equipment rooms.
Рекомендуется
Low-Power Remote Sensor Node
For battery-powered remote sensor nodes, the PIC18F45K22-I/P's XLP nanoWatt technology delivers sleep currents measured in nanoamps, allowing multi-year operation from a single coin cell when periodic wake-ups are used. The 12-bit ADC reads environmental parameters, the UART serves a low-power radio module such as the XBee or LoRa transceiver, and the internal 16 MHz oscillator eliminates an external crystal to reduce BOM cost. Designers leverage the deep-sleep retention of SRAM plus EEPROM for last-known state and calibration, while the 5 V supply is post-regulated from the battery for clean ADC reference.
Рекомендуется
Educational Development Platform
The PIC18F45K22-I/P is a workhorse in university embedded-systems labs because the 40-pin PDIP form factor accepts standard 0.100 inch sockets and breadboards, and the 64 MHz CPU supports real-time OS demonstrations. Students exercise UART, SPI, I2C, ADC, and PWM peripherals in a single device without remapping pinouts between parts. MPLAB X IDE and the XC8 compiler are free, while the PICkit 4 or MPLAB Snap programmer/debugger attaches via ICSP using PGD/PGC/MCLR. The K22's mature peripheral library and abundant reference code on Microchip's site accelerate lab completion.
Рекомендуется
Motor-Control Front-End
In motor-control front-ends, the PIC18F45K22-I/P's Enhanced Capture/Compare/PWM (ECCP) modules generate complementary PWMs with programmable dead-band for driving half-bridges via gate drivers such as the IR2104. Its 64 MHz core closes PI current loops well within the PWM period at 20 kHz, and the 12-bit ADC samples phase currents through op-amp sense amplifiers. The 40-pin PDIP simplifies bench bring-up and rework during prototype tuning. Designers transition to the TQFP package or the K22 QFN variant for production volume where the smaller footprint and thermal performance matter.
Рекомендуется
USB HID Peripheral (with FTDI bridge)
Where USB connectivity is required but the K22 lacks a native port, designers pair the PIC18F45K22-I/P with an FTDI FT230XS-R USB-to-UART bridge to expose a CDC or HID interface to the host PC. The PIC's UART runs at full speed driving the FT230, while firmware implements the application protocol (HID reports, sensor streaming, or boot-loader messaging). This combination preserves the K22's nanoWatt XLP sleep behavior and the well-known 40-pin PDIP prototyping footprint, making it a common pattern in lab tools, sensor adapters, and industrial configuration dongles.
Рекомендуется
Appliance Control Board
The PIC18F45K22-I/P is widely deployed in white-goods control boards (washing machines, dishwashers, induction cookers) because its 5 V operation, 12-bit ADC for current/voltage sensing, and PWM channels for triac/IGBT drive match typical appliance topologies. Its industrial temperature rating and long-life Flash retention accommodate 10+ year service intervals. The 40-pin PDIP remains the through-hole package of choice for hand-assembled or wave-soldered production lines. The K22 family's mature peripheral library and application notes accelerate compliance with IEC 60730 safety standards.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC18F45K22-I/P — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC18F46K22-I/P | PIC18F44K22-I/P | PIC18F45K22-E/P | PIC18F452-I/P | PIC18F4550-I/P |
|---|---|---|---|---|---|---|
| Package | 40-pin PDIP (DIP-40) | 40-pin PDIP (DIP-40) - same | 40-pin PDIP (DIP-40) - same | 40-pin PDIP (DIP-40) - same | 40-pin PDIP (DIP-40) - same | 40-pin PDIP (DIP-40) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Program Memory | 32 KB | 64 KB | 16 KB | 32 KB | 32 KB | 32 KB |
| SRAM | 1536 bytes | 3896 bytes | 768 bytes | 1536 bytes | 1536 bytes | 2048 bytes |
| CPU Speed | 64 MHz / 16 MIPS | 64 MHz / 16 MIPS | 64 MHz / 16 MIPS | 64 MHz / 16 MIPS | 40 MHz / 10 MIPS | 48 MHz / 12 MIPS |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 10-bit | 12-bit |
| USB Peripheral | No | No | No | No | No | Yes (USB 2.0 FS Device) |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| XLP nanoWatt Sleep | Yes | Yes | Yes | Yes | No | Limited |
Ключевые отличия
- 12-bit ADC vs legacy 10-bit ADC on older siblings (против PIC18F452-I/P)
- nanoWatt XLP sleep mode not present on legacy parts (против PIC18F452-I/P)
- Lower memory density compared with 46K22 sibling (против PIC18F46K22-I/P)
- 64 MHz CPU vs 48 MHz on USB-equipped sibling (против PIC18F4550-I/P)
Заметки по проектированию
Place a 100 nF ceramic plus a 10 uF tantalum or ceramic bulk capacitor within 4 mm of each VDD pin pair (pins 11/12 and pins 31/32). Use a low-ESR bulk cap and a small-value ceramic for high-frequency decoupling. AVDD and AVSS, if used, must be tied to the same VDD/VSS with their own 100 nF decoupling. Power-rail sequencing is not required, but the BOR should be enabled in configuration words for predictable reset behavior.
Keep the crystal or oscillator traces short and surround them with a ground guard ring to minimize EMI coupling into ADC inputs. Route analog signals (ANx) away from digital switching traces, especially PWM outputs, and provide a separate analog ground return if the PCB has split grounds. Place the ICSP test points on PGC (RB6), PGD (RB7), and MCLR (pin 1) on the board edge so a PICkit 4 or MPLAB Snap can attach without fly-wires. Reference Microchip's TB077 and AN585 app notes for additional layout guidance.
Estimated: switching from PIC18F452 code to PIC18F45K22 code requires reconfiguration of the ADC for 12-bit operation and review of the oscillator configuration bits, since the K22 adds the PLL and HFINTOSC modes not present on the F452. Always unlock the configuration registers using the CONFIG4L/PROG sequence in Flash before writing the CONFIG words, or the write will silently fail. Do not drive MCLR low without the internal weak pull-up disabled if the device is sharing the pin with a digital signal; otherwise add an external 10 kohm pull-up. Finally, the 36 I/O pins support 5 V logic, but analog inputs must remain within VSS-0.3 V to VDD+0.3 V or ADC readings will saturate.
Estimated: the 40-pin PDIP package has a theta_JA of approximately 50 C/W in still air and 35 C/W with 1 oz copper pours on the leads. At 64 MHz the K22 typically draws 12 mA from 5 V (60 mW), so self-heating is negligible (<3 C). However, when driving high-current loads through PORTB/PORTC I/O pins (sourcing 20 mA per pin up to 200 mA per port), the cumulative dissipation can rise several hundred milliwatts. Derate the I/O source current per port to 90 mA and per pin to 20 mA to stay within Microchip's published specifications.
The internal 16 MHz HFINTOSC is factory-trimmed to within +/- 2 percent across temperature, suitable for UART communication up to 9600 baud without external crystals. For higher baud rates, CAN, or USB timing, use an external crystal or resonator and configure HS or XT oscillator mode. The MSSP I2C module supports Standard, Fast, and Fast-Plus modes (up to 1 MHz) with proper pull-up resistor sizing; use 4.7 kohm pull-ups for Fast mode and 1 kohm for Fast-Plus. Always enable the SMBus input levels for robust I2C communication with industrial sensors.
Информация о соответствии
RoHS compliant per Microchip product page; lead-free matte-tin pins. Not AEC-Q100 qualified - choose AEC-Q100 equivalent from PIC18F family for automotive. Conflict-minerals statement available from Microchip.
