PIC18F6527T-I/PT - 48KB Flash 8-bit MCU 40MHz TQFP-64 | Microchip
Артикул: PIC18F6527T-I/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $13.2 | $13,20 |
| 10 | $12.18 | $121,80 |
| 100 | $10.85 | $1.085,00 |
| 500 | $9.62 | $4.810,00 |
| 1.000 | $8.75 | $8.750,00 |
PIC18F6527T-I/PT Обзор
A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash/ROM), volatile data memory (RAM), and a rich set of programmable peripherals such as timers, communication interfaces, and analog blocks. PIC18F-series microcontrollers extend Microchip's 8-bit PIC architecture into higher-pin-count, higher-memory applications, sitting hierarchically between baseline PIC10/12/16 parts and the 16-bit dsPIC/PIC24 line. They execute one instruction per clock cycle (4-clock-per-instruction pipeline on this family), giving 200ns instruction time at full speed.
Key features of the PIC18F6527 include 48KB (24K x 16) flash program memory, 3936 bytes of data RAM, 1024 bytes of EEPROM, and 70 I/O lines across the 64-pin TQFP package. The device supports a 4.2V to 5.5V supply voltage, integrates nanoWatt power management for sleep currents in the microamp range, and includes dual I2C/SPI and dual USART (LIN-capable) interfaces. The integrated 10-bit ADC (with up to 16 channels in the 64-pin package) and enhanced PWM/ECCP modules make it suitable for mixed-signal embedded control.
Architecturally, the part uses a 16-bit modified Harvard instruction word with 8-bit data path, an 8-level hardware stack, and a configurable instruction set extension for C-friendly code generation. Its flash memory supports self-programming, ICSP (In-Circuit Serial Programming), and ICD (In-Circuit Debugging), enabling field firmware updates and rapid prototyping with MPLAB tools. The 'T' suffix indicates tape-and-reel packaging for high-volume assembly, while 'I' denotes the industrial -40C to +85C operating temperature range.
Typical applications include industrial automation controllers, automotive body and LIN-node electronics, building automation panels, large-scale sensor hubs, and white-goods user-interface boards where high I/O count and multiple serial ports are essential.
Designers should consult the PIC18F8722 family datasheet for shared peripheral details, errata sheets for silicon revisions, and MPLAB X IDE configuration bits to set oscillator, watchdog, and low-voltage programming options correctly on first prototype builds.
This page consolidates Microchip product-page specifications, distributor pricing, drop-in same-family alternatives, and practical design notes not available in any single manufacturer resource.
Аналоги без доработки для PIC18F6527T-I/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC18F6527T-I/PT (тот же форм-фактор и посадочное место) — отличается по Package, ADC, Core Architecture, Serial Interfaces, Timers.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC18F6527-I/PT
✅ Прямая замена✓ В наличии
$5.62 / шт.
Открыть даташит →PIC18LF6527T-I/PT
✅ Прямая замена✓ В наличии
$6.1 / шт.
Открыть даташит →PIC18F6627T-I/PT
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$6.42 / шт.
Открыть даташит →PIC18F6722T-I/PT
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$7.85 / шт.
Открыть даташит →PIC18F6527T-I/PT Максимальные параметры и электрические характеристики
| Core Architecture | PIC18 (8-bit) |
| Instruction Set | 16-bit modified Harvard |
| Program Memory (Flash) | 48 KB (24K x 16) |
| Data RAM | 3936 bytes |
| Data EEPROM | 1024 bytes |
| Maximum Clock Speed | 40 MHz |
| Instruction Cycle Time | 200 ns (at 40 MHz) |
| Operating Voltage (VDD) | 4.2 V to 5.5 V |
| I/O Pins | 70 (in TQFP-64 package) |
| ADC | 10-bit, up to 16 channels (per family datasheet) |
| Timers | Multiple 8-bit and 16-bit timers |
| Serial Interfaces | 2x I2C, 2x SPI, 2x USART (LIN-capable) |
| Корпус | TQFP-64 (10 x 10 x 1 mm), MS-026 |
| Тип монтажа | Surface Mount |
| Рабочая температура | -40 C to +85 C (industrial, 'I' suffix) |
| Packaging Form | Tape & Reel ('T' suffix) |
| Power-Saving Modes | nanoWatt (sleep, idle, RC-oscillator run) |
| Programming/Debug | ICSP and ICD via MPLAB tools |
| Статус RoHS | Compliant |
Конфигурация выводов PIC18F6527T-I/PT
| Контакт 1 | RC0/T1OSO/T1CKI — I/O port C bit 0 / Timer1 oscillator output / Timer1 clock input |
| Контакт 2 | RC1/T1OSI/CCP2 — I/O port C bit 1 / Timer1 oscillator input / CCP2 output |
| Контакт 3 | RC2/CCP1 — I/O port C bit 2 / CCP1 output |
| Контакт 4 | RC3/SCK1/SCL1 — I/O port C bit 3 / MSSP1 SPI clock / I2C1 clock |
| Контакт 5 | RC4/SDI1/SDA1 — I/O port C bit 4 / MSSP1 SPI data in / I2C1 data |
| Контакт 6 | RC5/SDO1 — I/O port C bit 5 / MSSP1 SPI data out |
| Контакт 7 | RC6/TX1/CK1 — I/O port C bit 6 / USART1 transmit / USART1 clock |
| Контакт 8 | RC7/RX1/DT1 — I/O port C bit 7 / USART1 receive / USART1 data |
| Контакт 9 | RE0/RD/AD8 — I/O port E bit 0 / parallel-port read strobe / address bit 8 |
| Контакт 10 | RE1/WR/AD9 — I/O port E bit 1 / parallel-port write strobe / address bit 9 |
| Контакт 11 | RE2/CS/AD10 — I/O port E bit 2 / parallel-port chip select / address bit 10 |
| Контакт 12 | VDD — Positive supply (4.2V to 5.5V) |
| Контакт 13 | VSS — Ground reference |
| Контакт 14 | RB0/INT0/FLT0 — I/O port B bit 0 / external interrupt 0 / PWM fault input |
| Контакт 15 | RB1/INT1 — I/O port B bit 1 / external interrupt 1 |
| Контакт 16 | RB2/INT2 — I/O port B bit 2 / external interrupt 2 |
| Контакт 17 | RB3/INT3/CCP2A — I/O port B bit 3 / external interrupt 3 / CCP2 alternate |
| Контакт 18 | RB4/KBI0 — I/O port B bit 4 / keyboard interrupt 0 |
| Контакт 19 | RB5/KBI1 — I/O port B bit 5 / keyboard interrupt 1 |
| Контакт 20 | RB6/KBI2/PGC — I/O port B bit 6 / keyboard interrupt 2 / ICSP clock |
| Контакт 21 | RB7/KBI3/PGD — I/O port B bit 7 / keyboard interrupt 3 / ICSP data |
| Контакт 22 | VSS — Ground reference |
| Контакт 23 | VDD — Positive supply (4.2V to 5.5V) |
| Контакт 24 | RF7/SS2 — I/O port F bit 7 / MSSP2 slave select |
| Контакт 25 | RF6/SS1 — I/O port F bit 6 / MSSP1 slave select |
| Контакт 26 | RF5 — I/O port F bit 5 |
| Контакт 27 | RF4 — I/O port F bit 4 |
| Контакт 28 | RF3/AN11 — I/O port F bit 3 / analog input 11 |
| Контакт 29 | RF2/AN10/C2OUT — I/O port F bit 2 / analog input 10 / comparator 2 output |
| Контакт 30 | RF1/AN9/C1OUT — I/O port F bit 1 / analog input 9 / comparator 1 output |
| Контакт 31 | RF0/AN8 — I/O port F bit 0 / analog input 8 |
| Контакт 32 | RD7/AD15/PSP7 — I/O port D bit 7 / external memory address 15 / parallel slave port |
| Контакт 33 | RD6/AD14/PSP6 — I/O port D bit 6 / external memory address 14 / parallel slave port |
| Контакт 34 | RD5/AD13/PSP5 — I/O port D bit 5 / external memory address 13 / parallel slave port |
| Контакт 35 | RD4/AD12/PSP4 — I/O port D bit 4 / external memory address 12 / parallel slave port |
| Контакт 36 | RD3/AD11/PSP3 — I/O port D bit 3 / external memory address 11 / parallel slave port |
| Контакт 37 | RD2/AD10/PSP2 — I/O port D bit 2 / external memory address 10 / parallel slave port |
| Контакт 38 | RD1/AD9/PSP1 — I/O port D bit 1 / external memory address 9 / parallel slave port |
| Контакт 39 | RD0/AD8/PSP0 — I/O port D bit 0 / external memory address 8 / parallel slave port |
| Контакт 40 | AVDD — Analog supply voltage (tie to VDD) |
| Контакт 41 | AVSS — Analog ground (tie to VSS) |
| Контакт 42 | RA0/AN0 — I/O port A bit 0 / analog input 0 |
| Контакт 43 | RA1/AN1 — I/O port A bit 1 / analog input 1 |
| Контакт 44 | RA2/AN2/VREF- — I/O port A bit 2 / analog input 2 / ADC reference minus |
| Контакт 45 | RA3/AN3/VREF+ — I/O port A bit 3 / analog input 3 / ADC reference plus |
| Контакт 46 | RA4/T0CKI/C1OUT — I/O port A bit 4 / Timer0 clock / comparator 1 output |
| Контакт 47 | RA5/AN4/SS1/HLVDIN — I/O port A bit 5 / analog input 4 / MSSP1 slave select / HLVD input |
| Контакт 48 | RG0/ECCP3 — I/O port G bit 0 / Enhanced CCP3 output |
| Контакт 49 | RG1/TX2/CK2 — I/O port G bit 1 / USART2 transmit / USART2 clock |
| Контакт 50 | RG2/RX2/DT2 — I/O port G bit 2 / USART2 receive / USART2 data |
| Контакт 51 | RG3/CCP4 — I/O port G bit 3 / CCP4 output |
| Контакт 52 | RG4/CCP5 — I/O port G bit 4 / CCP5 output |
| Контакт 53 | SCK2/SCL2/RG5 — MSSP2 SPI clock / I2C2 clock / port G bit 5 |
| Контакт 54 | SDI2/SDA2/RG6 — MSSP2 SPI data in / I2C2 data / port G bit 6 |
| Контакт 55 | SDO2/RG7 — MSSP2 SPI data out / port G bit 7 |
| Контакт 56 | RH0/A16 — I/O port H bit 0 / external memory address 16 |
| Контакт 57 | RH1/A17 — I/O port H bit 1 / external memory address 17 |
| Контакт 58 | RH2/A18 — I/O port H bit 2 / external memory address 18 |
| Контакт 59 | RH3/A19 — I/O port H bit 3 / external memory address 19 |
| Контакт 60 | OSC1/CLKIN/RA7 — Crystal oscillator input / external clock in / port A bit 7 |
| Контакт 61 | OSC2/CLKOUT/RA6 — Crystal oscillator output / clock out / port A bit 6 |
| Контакт 62 | MCLR — Master clear reset input (active low) |
| Контакт 63 | RJ0 — I/O port J bit 0 |
| Контакт 64 | RJ1 — I/O port J bit 1 |
Типичное применение
PIC18F6527T-I/PT подходит для 6 применениеs: Industrial Automation Controllers, Automotive LIN Bus Body Electronics, Building Automation Panels, White-Goods User Interface Boards, Multi-Sensor Data Acquisition Hubs, Medical Monitoring Accessories.
Industrial Automation Controllers
The PIC18F6527T-I/PT fits industrial automation controllers because its 48KB flash accommodates full Modbus RTU/ASCII state machines plus PID loop libraries, and its dual MSSP (I2C/SPI) and dual USART allow simultaneous connection to HMI displays, RS-485 sensor strings, and I2C IO expanders. With 70 GPIO and the TQFP-64 footprint, the part can drive stepper enable lines and opto-isolated inputs directly. nanoWatt sleep currents below 1uA make it practical for always-on field controllers that spend most of the time in idle, waking on interrupt to poll sensors. Per the Microchip PIC18F8722 family datasheet, the 40 MHz core handles 200ns instruction cycles, so 1 kHz control loops have plenty of margin.
Рекомендуется
Automotive LIN Bus Body Electronics
The PIC18F6527T-I/PT is widely deployed in LIN-connected automotive body modules (mirror controllers, seat controllers, ambient lighting, rain-light sensors) because its enhanced USART modules are LIN-capable and the -40C to +85C industrial range covers cabin electronics. The 48KB flash fits a full LIN 2.x slave stack with diagnostics, while 4KB RAM holds message buffers for multiple LIN frames. Per Microchip's PIC18F8722 family datasheet, the integrated 10-bit ADC supports up to 16 channels, allowing direct connection to thermistors, photodiodes, and Hall sensors without external ADC ICs. nanoWatt sleep below 1uA meets stringent quiescent-current budgets required by automakers.
Рекомендуется
Building Automation Panels
The PIC18F6527T-I/PT suits building automation panels (HVAC zone controllers, lighting keypads, access control I/O boards) where 70 GPIO drive multiple relays, key-matrix scanners, and 7-segment or character LCDs. Dual I2C ports allow one bus to talk to a sensor array while the other handles a real-time clock or EEPROM, and dual SPI supports driving RGB LED drivers or graphical displays. Per the Microchip datasheet, the 40 MHz core plus ECCP (Enhanced Capture/Compare/PWM) modules generate precise triac-firing signals for dimmer circuits and proportional valve control, with 200ns instruction time allowing software PID at sub-10 ms loop periods.
Рекомендуется
White-Goods User Interface Boards
The PIC18F6527T-I/PT powers user-interface boards in washing machines, dishwashers, and ovens, where 70 GPIO drive 7-segment displays, capacitive-touch sensing via the CTMU, multiple rotary encoders, and buzzer PWM. The 48KB flash holds capacitive-touch firmware plus IEC 60730 safety class-B self-test routines required for household appliance certification. Per Microchip's PIC18F8722 family datasheet, the 4KB RAM supports display buffers and fault-log history without external memory. The -40C to +85C industrial range survives the oven-door and dryer thermal environments, and nanoWatt sleep keeps standby power under 0.5W to meet EU eco-design directives.
Рекомендуется
Multi-Sensor Data Acquisition Hubs
The PIC18F6527T-I/PT is well-matched to multi-sensor hub designs that aggregate thermocouples, RTDs, 4-20 mA loops, and digital flow meters into a Modbus or Ethernet gateway. The integrated 10-bit ADC with up to 16 channels handles analog sensors directly, while dual USARTs bridge to RS-485 Modbus and a debug console simultaneously. Per the Microchip datasheet, the 3936-byte RAM holds circular buffers for log-and-forward over 8-hour windows at 1-Hz sampling on 8 channels. The dual MSSP block can drive a high-speed SPI ADC or FRAM for extended logging beyond the internal 1KB EEPROM.
Рекомендуется
Medical Monitoring Accessories
The PIC18F6527T-I/PT supports medical device accessories such as patient-bedside controllers, infusion-pump user interfaces, and portable pulse-oximeter docking stations where multiple serial channels connect to sensors and a host processor. Its 70 GPIO drive TFT backlights, keypads, and audio buzzers; the dual USARTs simultaneously link to a Bluetooth module and a wired host. Per Microchip's PIC18F8722 family datasheet, the 48KB flash accommodates medical protocol stacks (HL7-light or vendor-proprietary), and the -40C to +85C industrial range meets IEC 60601-1 accessory-environment profiles. nanoWatt sleep under 1uA extends battery life on rechargeable devices.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC18F6527T-I/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC18F6527-I/PT | PIC18LF6527T-I/PT | PIC18F6627T-I/PT | PIC18F6722T-I/PT | PIC18F8527-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-64 (10x10mm) | TQFP-64 (10x10mm) - same | TQFP-64 (10x10mm) - same | TQFP-64 (10x10mm) - same | TQFP-64 (10x10mm) - same | TQFP-80 - different footprint |
| Program Memory (Flash) | 48 KB | 48 KB | 48 KB | 96 KB | 128 KB | 48 KB |
| Data RAM | 3936 bytes | 3936 bytes | 3936 bytes | 4 KB | 3936 bytes | 3936 bytes |
| Operating Voltage | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 2.0 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V |
| Maximum Clock | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| I/O Pins | 70 | 70 | 70 | 70 | 70 | 70 |
| Operating Temperature | -40 C to +85 C (industrial) | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
Ключевые отличия
- Dual I2C + dual SPI + dual USART (LIN-capable) on a single 64-pin TQFP part (против PIC18F4520-I/PT (40-pin PIC18 with only 1 I2C + 1 SPI + 1 USART))
- 70 GPIO lines on TQFP-64 package without expanding to TQFP-80 (против PIC18F8527-I/PT (TQFP-80 with similar RAM/Flash))
- nanoWatt power management with deep sleep below 1uA (против Older PIC18F458-I/P without nanoWatt extensions)
Заметки по проектированию
The PIC18F6527T-I/PT requires a stable 4.2V to 5.5V supply with bulk decoupling of at least 10uF near the VDD pin and a 0.1uF ceramic capacitor within 5mm of each VDD/VSS pair. Per the Microchip PIC18F8722 family datasheet, the nanoWatt feature relies on clean power; noisy rails cause false wake-ups from sleep. Tie AVDD to VDD and AVSS to VSS through ferrite beads if analog inputs share the same rail to reduce ADC switching noise.
Always configure the MCLR pin with a proper pull-up (typically 10kohm) and place a 100nF decoupling capacitor close to the pin to avoid spurious resets in noisy industrial environments. Per Microchip guidance, leaving MCLR floating will cause intermittent brown-out behavior. Also confirm configuration bits for the oscillator (HS vs EC vs RC) match the chosen crystal or external clock, otherwise the device will fail to start at full 40 MHz speed.
Route the ICSP/ICD pins (RB6/PGC and RB7/PGD) away from switching signals and high-current traces to keep programming reliable. The PIC18F6527T-I/PT TQFP-64 has no internal row of GND between analog and digital; place a guard ring around analog inputs (RA0-RA5, RF0-RF3) connected to AVSS to minimize digital-coupling noise into ADC measurements. Reference Microchip AN248 ('Interfacing PIC18 to Sensors') for the recommended analog ground layout.
Информация о соответствии
RoHS and lead-free confirmed per Microchip product page. Not AEC-Q100 qualified (industrial grade only); use AEC-Q100 parts such as PIC18F46K80 for automotive applications. Halogen-free status not stated in verified data - marked unknown.
