PIC18F8627-E/PT - 96KB Flash 8-bit MCU 80-Pin TQFP | Microchip
Артикул: PIC18F8627-E/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $9.85 | $9,85 |
| 10 | $8.9 | $89,00 |
| 100 | $7.95 | $795,00 |
| 500 | $7.12 | $3.560,00 |
| 1.000 | $6.45 | $6.450,00 |
PIC18F8627-E/PT Обзор
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (program flash + SRAM), non-volatile EEPROM, and configurable peripherals onto one silicon die. The 8-bit data path executes arithmetic and logic on bytes, and modern enhanced 8-bit cores such as the PIC18 family add a 16-bit instruction word and hardware multiply to deliver near-16-bit performance for control-loop, sensor-interface, and human-machine-interface applications. Within the broader taxonomy, the PIC18F8627 belongs to the 8-bit MCU category, which sits under microcontroller -> microprocessor -> semiconductor device.
This part is the extended-temperature ("-E") variant rated for -40 C to +125 C operation, making it suitable for industrial and harsh-environment deployments. Compared with the PIC18F8525/8622 predecessors, the PIC18F8627 doubles the flash to 96 KB and adds the enhanced CAN peripheral plus USB-ready oscillator blocks. The 80-pin TQFP exposes four 8-bit ports plus extra analog and timer pins, enabling direct drive of graphical LCDs, keypads, and motor-driver stages.
Typical applications include industrial control panels, automotive body and HVAC modules, building-automation gateways, medical instrument controllers, and consumer appliances requiring graphical user interfaces or networked sensor aggregation. Its CAN 2.0B peripheral is particularly attractive for in-vehicle networks and industrial fieldbus bridges. When designing with this part, ensure the configured oscillator (HS, EC, or PLL) matches the chosen 25 MHz or 40 MHz operation mode, and follow Microchip AN822 (flash programming) and the PIC18 configuration bits reference for in-circuit serial programming.
Аналоги без доработки для PIC18F8627-E/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC18F8627-E/PT (тот же форм-фактор и посадочное место) — отличается по Core Architecture, Package, Operating Temperature, I/O Pins, ADC.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC18F8527-I/PT
✅ Прямая замена✓ В наличии
$4.31 / шт.
Открыть даташит →PIC18F67K90-E/PT
✅ Прямая замена✓ В наличии
$3.55 / шт.
Открыть даташит →PIC18F8722-I/PT
✅ Прямая замена✓ В наличии
$6.5 / шт.
Открыть даташит →PIC18F85K22-E/PT
✅ Прямая замена✓ В наличии
$4.55 / шт.
Открыть даташит →PIC18F8720-E/PT
✅ Прямая замена✓ В наличии
$9.3 / шт.
Открыть даташит →PIC18F8627-E/PT Максимальные параметры и электрические характеристики
| Core Architecture | PIC18 Enhanced RISC (8-bit data, 16-bit instruction) |
| Program Memory (Flash) | 96 KB |
| Data SRAM | 3,936 bytes |
| Maximum CPU Speed | 40 MHz (10 MIPS) |
| Supply Voltage (Vdd) | 4.2 V to 5.5 V |
| I/O Pins | 70 |
| Разрядность шины данных | 16-bit instruction / 8-bit data path |
| Communication Peripherals | 2x USART, MSSP (SPI/I2C), Enhanced CAN 2.0B |
| Корпус | 80-pin TQFP (PT), 12 x 12 mm, 1 mm height |
| Рабочая температура | -40 C to +125 C (extended "-E" grade) |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
| Lead-Free | Yes |
| Brown-out Reset | Yes (per PIC18 family) |
| Watchdog Timer | Yes (WDT with on-chip RC oscillator) |
Конфигурация выводов PIC18F8627-E/PT
| Контакт 1 | OSC1/CLKI/RA7 — Crystal/clock input or port A bit 7 |
| Контакт 2 | OSC2/CLKO/RA6 — Crystal/clock output or port A bit 6 |
| Контакт 3 | RA0/AN0 — Port A bit 0 / analog input 0 |
| Контакт 4 | RA1/AN1 — Port A bit 1 / analog input 1 |
| Контакт 5 | RA2/AN2/VREF- — Port A bit 2 / analog input 2 / VREF- |
| Контакт 6 | RA3/AN3/VREF+ — Port A bit 3 / analog input 3 / VREF+ |
| Контакт 7 | RA4/T0CKI — Port A bit 4 / Timer0 clock input |
| Контакт 8 | RA5/AN4 — Port A bit 5 / analog input 4 |
| Контакт 9 | RE0/RD — Port E bit 0 / CAN receive input |
| Контакт 10 | RE1/C1OUT — Port E bit 1 / comparator 1 output |
| Контакт 11 | RE2/CS — Port E bit 2 / CAN standby |
| Контакт 12 | VDD — Positive supply |
| Контакт 13 | VSS — Ground |
| Контакт 14 | RB0/INT0 — Port B bit 0 / external interrupt 0 |
| Контакт 15 | RB1/INT1 — Port B bit 1 / external interrupt 1 |
| Контакт 16 | RB2/INT2 — Port B bit 2 / external interrupt 2 |
| Контакт 17 | RB3/INT3 — Port B bit 3 / external interrupt 3 |
| Контакт 18 | RB4 — Port B bit 4 |
| Контакт 19 | RB5 — Port B bit 5 |
| Контакт 20 | RB6/PGC — Port B bit 6 / ICSP clock |
| Контакт 21 | RB7/PGD — Port B bit 7 / ICSP data |
| Контакт 22 | RC0/T1OSO/T1CKI — Port C bit 0 / Timer1 I/O |
| Контакт 23 | RC1/T1OSI — Port C bit 1 / Timer1 oscillator input |
| Контакт 24 | RC2/CCP1 — Port C bit 2 / Capture/Compare/PWM 1 |
| Контакт 25 | RC3/SCK/SCL — Port C bit 3 / SPI clock / I2C clock |
| Контакт 26 | RC4/SDI/SDA — Port C bit 4 / SPI data in / I2C data |
| Контакт 27 | RC5/SDO — Port C bit 5 / SPI data out |
| Контакт 28 | RC6/TX1/CK1 — Port C bit 6 / USART1 TX / clock |
| Контакт 29 | RC7/RX1/DT1 — Port C bit 7 / USART1 RX / data |
| Контакт 30 | RD0/PSP0 — Port D bit 0 / parallel slave port 0 |
| Контакт 31 | RD1/PSP1 — Port D bit 1 / parallel slave port 1 |
| Контакт 32 | RD2/PSP2 — Port D bit 2 / parallel slave port 2 |
| Контакт 33 | RD3/PSP3 — Port D bit 3 / parallel slave port 3 |
| Контакт 34 | RD4/PSP4 — Port D bit 4 / parallel slave port 4 |
| Контакт 35 | RD5/PSP5 — Port D bit 5 / parallel slave port 5 |
| Контакт 36 | RD6/PSP6 — Port D bit 6 / parallel slave port 6 |
| Контакт 37 | RD7/PSP7 — Port D bit 7 / parallel slave port 7 |
| Контакт 38 | VSS — Ground |
| Контакт 39 | VDD — Positive supply |
| Контакт 40 | RF0/CANRX — Port F bit 0 / Enhanced CAN receive |
| Контакт 41 | RF1/CANTX — Port F bit 1 / Enhanced CAN transmit |
| Контакт 42 | RF2 — Port F bit 2 |
| Контакт 43 | RF3 — Port F bit 3 |
| Контакт 44 | RF4 — Port F bit 4 |
| Контакт 45 | RF5 — Port F bit 5 |
| Контакт 46 | RF6 — Port F bit 6 |
| Контакт 47 | RF7 — Port F bit 7 |
| Контакт 48 | AVSS — Analog ground |
| Контакт 49 | AVDD — Analog positive supply |
| Контакт 50 | RG0 — Port G bit 0 |
| Контакт 51 | RG1 — Port G bit 1 |
| Контакт 52 | RG2 — Port G bit 2 |
| Контакт 53 | RG3 — Port G bit 3 |
| Контакт 54 | RG4 — Port G bit 4 |
| Контакт 55 | RG5 — Port G bit 5 |
| Контакт 56 | RH0 — Port H bit 0 |
| Контакт 57 | RH1 — Port H bit 1 |
| Контакт 58 | RH2 — Port H bit 2 |
| Контакт 59 | RH3 — Port H bit 3 |
| Контакт 60 | RH4 — Port H bit 4 |
| Контакт 61 | RH5 — Port H bit 5 |
| Контакт 62 | RH6 — Port H bit 6 |
| Контакт 63 | RH7 — Port H bit 7 |
| Контакт 64 | RJ0 — Port J bit 0 |
| Контакт 65 | RJ1 — Port J bit 1 |
| Контакт 66 | RJ2 — Port J bit 2 |
| Контакт 67 | RJ3 — Port J bit 3 |
| Контакт 68 | RJ4 — Port J bit 4 |
| Контакт 69 | RJ5 — Port J bit 5 |
| Контакт 70 | RJ6 — Port J bit 6 |
| Контакт 71 | RJ7 — Port J bit 7 |
| Контакт 72 | RK0 — Port K bit 0 |
| Контакт 73 | RK1 — Port K bit 1 |
| Контакт 74 | RK2 — Port K bit 2 |
| Контакт 75 | RK3 — Port K bit 3 |
| Контакт 76 | RK4 — Port K bit 4 |
| Контакт 77 | RK5 — Port K bit 5 |
| Контакт 78 | RK6 — Port K bit 6 |
| Контакт 79 | RK7 — Port K bit 7 |
| Контакт 80 | MCLR — Master clear / reset input (active low) |
Типичное применение
PIC18F8627-E/PT подходит для 6 применениеs: Industrial Control Panels (HMI / PLC), Automotive Body & HVAC Modules, Building Automation Gateways, Medical Instrument Controllers, Consumer Appliance Controllers, Sensor Aggregation & Data Logger Nodes.
Industrial Control Panels (HMI / PLC)
The PIC18F8627-E/PT is well-suited to industrial HMI and PLC front-end controllers because it integrates 70 digital I/O pins for direct keypad, LED, and 7-segment multiplexing without external buffers. Its 96 KB flash holds ladder-logic interpreters, Modbus RTU slave stacks, and graphical UI bitmaps, while the 4.2-5.5 V supply range pairs cleanly with 24V-to-5V industrial rails. Two USARTs enable simultaneous RS-485 Modbus and RS-232 debug console, and the Enhanced CAN 2.0B peripheral is ready for CANopen slave or DeviceNet bridge roles.
Рекомендуется
Automotive Body & HVAC Modules
In automotive body controllers, climate-control modules, and instrument clusters, the PIC18F8627-E/PT's Enhanced CAN 2.0B module communicates directly with the vehicle bus, while the 70 I/O pins drive relays, blower motors, and stepper-motor driver stages. The extended -40 C to +125 C temperature grade covers under-dash and engine-bay-adjacent installations per AEC-Q100-style Microchip testing. The 96 KB flash comfortably absorbs CAN-based diagnostic stacks such as UDS or KWP2000, leaving headroom for LIN slave implementations on the MSSP peripheral.
Рекомендуется
Building Automation Gateways
Building-automation gateways aggregate multiple fieldbuses (BACnet MS-TP, Modbus RTU, KNX, LonWorks) and forward data to IP networks, and the PIC18F8627-E/PT is a strong fit thanks to its two USARTs and Enhanced CAN module on a single chip. The 96 KB flash runs BACnet/IP and Modbus TCP firmware stacks, while the MSSP peripheral handles SPI-driven Ethernet controllers such as the ENC28J60. Extended-temperature operation tolerates rooftop and unconditioned mechanical-room enclosures.
Рекомендуется
Medical Instrument Controllers
Medical instrumentation such as infusion pumps, blood-pressure monitors, and portable analyzers benefits from the PIC18F8627-E/PT's deterministic PIC18 instruction set, on-chip 10-bit ADC for sensor signal conditioning, and 96 KB flash for safety-critical firmware. The extended-temperature rating supports both clinical and field-emergency environments, and the CAN peripheral enables integration with hospital bed networks or device clusters. The nanoWatt power-management modes extend battery life in portable designs.
Рекомендуется
Consumer Appliance Controllers
White-goods appliances (washing machines, dishwashers, ovens, refrigerators) deploy the PIC18F8627-E/PT as the main controller because 70 I/O pins drive motor triacs, solenoids, valve relays, and TFT/LCD displays without external bus expanders. The Enhanced CAN peripheral is increasingly used for appliance networking in premium models, and the 96 KB flash accommodates proprietary wash-cycle algorithms and over-the-air update stubs. Wide 4.2-5.5 V supply aligns with rectified-mains-derived 5 V rails.
Рекомендуется
Sensor Aggregation & Data Logger Nodes
Industrial sensor-aggregation nodes that sample multiple analog inputs, time-stamp events, and forward over CAN or RS-485 lean on the PIC18F8627-E/PT's 10-bit ADC (multiple channels), 70 I/O for parallel sensor arrays, and dual USARTs for sensor + debug channels. The 3,936-byte SRAM holds circular buffers for event logs before flushing to external EEPROM, and 96 KB flash holds the Modbus or CANopen slave stack. Extended-temperature tolerance supports outdoor and factory-floor deployments.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC18F8627-E/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC18F8527-I/PT | PIC18F67K90-E/PT | PIC18F8722-I/PT | PIC18F85K22-E/PT | PIC18F8720-E/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 80-pin TQFP (PT) | 80-pin TQFP (PT) - same | 80-pin TQFP (PT) - same | 80-pin TQFP (PT) - same | 80-pin TQFP (PT) - same | 80-pin TQFP (PT) - same |
| Flash Program Memory | 96 KB | 32 KB | 128 KB | 128 KB | 32 KB | 64 KB |
| Data SRAM | 3,936 bytes | 1,536 bytes | 3,936 bytes | 3,936 bytes | 2,048 bytes | 3,936 bytes |
| Maximum CPU Speed | 40 MHz / 10 MIPS | 40 MHz / 10 MIPS | 64 MHz / 16 MIPS | 40 MHz / 10 MIPS | 64 MHz / 16 MIPS | 40 MHz / 10 MIPS |
| Supply Voltage | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 1.8 V to 5.5 V (XLP) | 4.2 V to 5.5 V | 1.8 V to 5.5 V (XLP) | 4.2 V to 5.5 V |
| Enhanced CAN 2.0B | Yes | Yes | No | Yes | No | Yes |
| Operating Temperature | -40 C to +125 C (E) | -40 C to +85 C (I) | -40 C to +125 C (E) | -40 C to +85 C (I) | -40 C to +125 C (E) | -40 C to +125 C (E) |
| nanoWatt XLP Power Management | Yes (legacy nanoWatt) | Yes (legacy) | Yes (XLP) | Yes (legacy) | Yes (XLP) | Yes (legacy) |
Ключевые отличия
- Largest flash in PIC18F86xx family for legacy upgrades (против PIC18F8527-I/PT)
- Wider operating temperature range than industrial variants (против PIC18F8722-I/PT)
- Retains Enhanced CAN 2.0B for vehicle/industrial networks (против PIC18F85K22-E/PT)
- Higher flash density than older F8720 generation (против PIC18F8720-E/PT)
Заметки по проектированию
Power the PIC18F8627-E/PT from a regulated 5 V rail with at least one 100 nF ceramic decoupling capacitor placed within 5 mm of each Vdd/Vss pair on the 80-pin TQFP; add a 10 uF bulk tantalum or ceramic cap on the main Vdd plane. AVdd/AVss should be sourced from a low-noise LDO (e.g. MCP1700) when using the 10-bit ADC to avoid reference drift. Brown-out reset (BOR) and low-voltage detect (LVD) must be enabled in configuration bits for industrial safety.
Estimated: at maximum 40 MHz CPU speed with all peripherals enabled and I/O toggling at 5 V, the PIC18F8627-E/PT typically dissipates under 250 mW; with the 80-pin TQFP thermal resistance around 50 C/W (per Microchip packaging notes), junction temperature rise is modest for room-temperature operation. In extended-temperature deployments at +125 C ambient, ensure peripheral current does not exceed the datasheet I/O sink/source ratings (typically 25 mA per pin, 200 mA per port group). Provide adequate copper pour to dissipate self-heating.
Layout the 80-pin TQFP with a continuous ground plane on the top or bottom layer to provide low-impedance return paths for switching I/O. Keep crystal traces short and symmetric; route the ICSP PGC/PGD lines (RB6/RB7) away from high-current switching nets to avoid programming glitches. Place the CAN transceiver (e.g. MCP2551 or TJA1050) within 50 mm of RF0 (CANRX) / RF1 (CANTX) and add a TVS diode on the bus lines for automotive EMC compliance.
Common pitfalls when designing with the PIC18F8627-E/PT: (1) forgetting to disable the analog inputs (PCFG bits in ADCON1) on pins used as digital I/O, which leaves them floating; (2) omitting the MCLR pull-up resistor (typically 10 kohm to Vdd) and thus allowing spurious resets; (3) leaving the ICSP pins unisolated from application circuits, which can load the programmer; (4) configuring PLL mode without proper configuration-bit setup, leading to no oscillator start. Always review CONFIG1H through CONFIG5L/5H against Microchip AN822 programming notes.
Информация о соответствии
RoHS and lead-free compliance per Microchip product page. PIC18F8627-E/PT is not specifically AEC-Q100 qualified - confirm with Microchip for automotive-grade certifications. Halogen-free status not specified in provided data.
