PIC18LC601-I/L - 8-bit 25MHz ROMless MCU, 68-PLCC | Microchip
Артикул: PIC18LC601-I/L ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $9.5 | $9,50 |
| 10 | $8.85 | $88,50 |
| 100 | $8.1 | $810,00 |
| 500 | $7.4 | $3.700,00 |
| 1.000 | $6.75 | $6.750,00 |
PIC18LC601-I/L Обзор
An 8-bit microcontroller (MCU) is a programmable integrated circuit that combines a CPU, RAM, ROM/Flash, timers, and peripherals on a single die. It belongs to the larger hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The PIC18 family uses a Harvard RISC architecture with a 16-bit instruction word and 8-bit data path, providing deterministic execution and rich peripheral integration for cost-effective embedded designs.
Key features include 1.5 KB of general-purpose RAM, 26 digital I/O pins, multiple 8/16-bit timers, USART, I2C, SPI peripherals, a 10-bit ADC, and capture/compare/PWM modules. The 'LC' suffix designates a low-voltage core (typically 3.3V operation), while the ROMless nature allows flexible program storage in external EPROM/Flash. The 25 MHz clock yields 10 MIPS instruction throughput.
The PIC18LC601 uses a modified Harvard RISC core with 77 instructions and hardware multiply support, providing predictable timing for real-time control. The external memory bus is multiplexed to maximize I/O availability, with separate program and data addressing. Its low-power architecture and CMOS process enable extended operation in battery-powered systems.
Typical applications include industrial automation, motor control, sensor interfaces, embedded control panels, and prototype development for PIC18-based products. It is also used in legacy system maintenance, retrofits, and educational platforms due to its external-memory architecture and broad peripheral set.
When designing with this MCU, plan memory decoding and bus-arbitation logic for the external program memory interface, and consider migration to flash-based PIC18F variants for production. Use the industrial (-I) temperature range of -40C to +85C for harsh environments.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Аналоги без доработки для PIC18LC601-I/L — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC18LC601-I/L (тот же форм-фактор и посадочное место) — отличается по Mounting Type, Operating Temperature, Number of I/O Pins, Core Architecture, Instruction Set.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC18C601-I/L
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
PIC18C801-I/L
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$6.25 / шт.
Открыть даташит →PIC18LC601-I/L Максимальные параметры и электрические характеристики
| Core Architecture | PIC 8-bit RISC (Harvard) |
| Series | PIC18C |
| Program Memory Type | ROMless (external memory bus) |
| Maximum External Program Memory | 256 KB (via external memory interface) |
| RAM Size | 1.5 KB x 8 |
| Maximum CPU Speed | 25 MHz |
| Number of I/O Pins | 26 |
| Корпус | 68-LCC (J-Lead), PLCC-68 |
| Operating Voltage | 2.5 V to 5.5 V (low-voltage 'LC' core) |
| Oscillator Type | External |
| Instruction Set | PIC18C (77 instructions, 16-bit opcode) |
| Рабочая температура | -40C to +85C (industrial 'I' grade) |
| Тип монтажа | Surface Mount (PLCC socket compatible) |
| Packaging | Tube |
| Статус RoHS | Compliant |
| Lead-Free | Yes |
Руководство по цоколевке PIC18LC601-I/L в корпусе 68-lcc (j-lead), plcc-68
Цоколевка для PIC18LC601-I/L (корпус 68-lcc (j-lead), plcc-68). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для PIC18LC601-I/L.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
PIC18LC601-I/L подходит для 7 применениеs: Embedded Industrial Control Systems, Motor Control and PWM Drive, Sensor Interface and Data Acquisition, Prototype Development and Education Platforms, Legacy System Maintenance and Retrofits, Communication Gateway and Protocol Conversion, Automotive Body and Comfort Electronics.
Embedded Industrial Control Systems
The PIC18LC601-I/L is well suited to industrial control panels, PLCs, and machine interfaces due to its 25 MHz CPU, 26 I/O lines, and industrial -40C to +85C temperature range. The ROMless architecture enables rapid firmware iteration during development via external EPROM reprogramming without chip replacement. Combined with USART, I2C, and SPI peripherals, the MCU can interface with sensors, motor drivers, and HMI displays in factory automation environments where deterministic 8-bit control and proven PIC18 reliability are valued.
Рекомендуется
Motor Control and PWM Drive
The PIC18LC601-I/L supports motor-control applications via its capture/compare/PWM modules and 25 MHz CPU, which provides sufficient throughput for PID loop calculation and PWM generation at typical 20-50 kHz switching frequencies. The 1.5 KB RAM holds real-time variables for speed, current, and position feedback. The industrial temperature grade and robust PIC18 architecture suit stepper/DC servo control in industrial equipment, while the low-voltage 'LC' core enables 3.3V-only designs.
Рекомендуется
Sensor Interface and Data Acquisition
Sensor interface nodes leverage the PIC18LC601-I/L's USART, I2C, and SPI peripherals to aggregate data from temperature, pressure, and flow sensors. The 26 I/O lines accommodate multiple sensor inputs and digital outputs, while the 10 MIPS instruction rate supports basic signal conditioning and averaging algorithms. ROMless designs allow field firmware updates via external memory swap, useful in remote sensor deployments where in-circuit reprogramming is impractical.
Рекомендуется
Prototype Development and Education Platforms
The PIC18LC601-I/L is a classic choice for PIC18 development boards, training kits, and university embedded courses due to its external memory bus, which lets students observe Harvard architecture and bus arbitration in real time. Educational use benefits from the ROMless design that allows code swap without chip erasure, and from the well-documented PIC18 instruction set. The PLCC-68 socket-mount package simplifies lab work, as damaged MCUs can be replaced without desoldering.
Рекомендуется
Legacy System Maintenance and Retrofits
Many industrial, automotive, and aerospace systems built in the late 1990s-2000s used PIC18C-series ROMless MCUs, and the PIC18LC601-I/L supports ongoing maintenance, retrofit, and obsolescence management of those platforms. The PLCC-68 socketed form factor enables direct swap-in replacements for failed units in fielded equipment. The industrial temperature grade and proven PIC18 reliability ensure compatibility with existing system firmware and hardware interfaces, minimizing redesign effort.
Рекомендуется
Communication Gateway and Protocol Conversion
Communication gateway designs use the PIC18LC601-I/L for protocol bridging between RS-232/RS-485, I2C, SPI, and sensor networks. The USART, I2C, and SPI peripherals enable simultaneous multi-bus operation, while the 25 MHz CPU handles basic protocol parsing and frame forwarding. The ROMless architecture supports gateway firmware that references large lookup tables stored in external memory, useful for protocol translation databases and configuration storage in networked embedded systems.
Рекомендуется
Automotive Body and Comfort Electronics
Although the PIC18LC601-I/L is not AEC-Q100 qualified, it is used in non-safety automotive body applications such as interior lighting controllers, seat memory modules, and accessory interfaces in cost-sensitive vehicle platforms. The 25 MHz CPU and 26 I/O lines support multi-channel PWM for LED dimming and motor positioning. For safety-critical or modern automotive designs, designers should migrate to AEC-Q100-qualified PIC18F variants with on-chip flash for production reliability.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC18LC601-I/L — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC18C601-I/L | PIC18C801-I/L | PIC18F8720-I/PT |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 68-LCC (J-Lead) | 68-LCC (J-Lead) - same | 68-LCC (J-Lead) - same | TQFP-80 - different |
| Program Memory Type | ROMless (external) | ROMless | ROMless | Flash 128 KB |
| Maximum CPU Speed | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| RAM Size | 1.5 KB | 1.5 KB | 1.5 KB | 3.8 KB |
| Number of I/O Pins | 26 | 26 | 26 | 70 |
| Operating Voltage | 2.5 V to 5.5 V (LC low-voltage core) | 4.2 V to 5.5 V (5V core) | 4.2 V to 5.5 V (5V core) | 4.2 V to 5.5 V (5V core) |
| Architecture Family | PIC18C (ROMless) | PIC18C | PIC18C | PIC18F |
Ключевые отличия
- ROMless architecture with external memory bus (против PIC18F8720-I/PT)
- Low-voltage LC core operation (против PIC18C601-I/L)
- PLCC-68 socket-compatible package (против PIC18F8720-I/PT (TQFP-80))
Заметки по проектированию
The PIC18LC601-I/L is a low-voltage 'LC' core requiring 3.3V typical supply (2.5-5.5V range). Use a low-dropout regulator with adequate decoupling - 100nF ceramic on each VDD pin and 10uF bulk capacitor on the supply rail. The MCU has multiple VDD/VSS pins around the PLCC-68 perimeter; all must be connected for proper operation. Brown-out reset (BOR) circuitry should be enabled in configuration bits to ensure defined startup behavior at low voltages.
According to the PIC18LC601 errata documentation, certain devices exhibit anomalous behavior in their Timer1 modules. Engineers must review the Microchip errata sheet for the PIC18LC601 silicon revision they are using and apply recommended workarounds. Additionally, designers should not assume flash-based PIC18 firmware patterns will port directly - the ROMless PIC18LC601 requires external memory bus configuration and wait-state setup at 25 MHz to avoid bus contention.
When laying out the PLCC-68 footprint, use a socket for development so failed or upgraded MCUs can be swapped without desoldering. Provide clean ground and power planes under the package, and place external memory (EPROM/Flash) as close to the address/data bus pins as possible to minimize bus skew. Add pull-up resistors on I2C and MCLR pins per PIC18 datasheet recommendations, and route the external memory bus with matched-length traces to avoid timing violations at 25 MHz.
Информация о соответствии
RoHS and lead-free compliant per Microchip product documentation. Not AEC-Q100 qualified - for automotive applications use AEC-Q100 qualified PIC18F variants. REACH and conflict-minerals status confirmed compliant per Microchip material declarations.
