PIC18LF1220T-I/SO - 8-bit MCU, 4KB Flash, 40MHz, 18-SOIC | Microchip
Артикул: PIC18LF1220T-I/SO ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $2.45 | $2,45 |
| 10 | $2.18 | $21,80 |
| 100 | $1.89 | $189,00 |
| 500 | $1.62 | $810,00 |
| 1.000 | $1.38 | $1.380,00 |
PIC18LF1220T-I/SO Обзор
A PIC18 microcontroller is an 8-bit RISC processor within the broader PIC microcontroller family, which itself belongs to the microcontroller unit (MCU) category in the integrated circuit hierarchy. PIC18 devices execute one instruction per clock cycle (except for branches) and integrate Flash program memory, data EEPROM, SRAM, and configurable peripherals into a single die. Designers choose PIC18 over PIC16 when they need higher performance (40 MIPS vs 5 MIPS), larger memory, enhanced peripherals, and C-friendly architecture while retaining byte-level register control for tight real-time loops.
Key specifications include a 40 MHz maximum operating frequency (10 MIPS), 16 I/O pins, an internal oscillator, a 10-bit ADC with up to 7 channels, and nanoWatt XLP technology that drops supply current to under 1 µA in sleep mode. The PIC18LF1220 also features a 10-bit PWM module, two analog comparators, an Enhanced USART (EUSART), and a Master Synchronous Serial Port (MSSP) supporting SPI and I²C master/slave modes. Brown-out Reset (BOR), Power-on Reset (POR), and an extended watchdog timer (WDT) are built in, and the device supports in-circuit serial programming (ICSP) and in-circuit debugging (ICD).
The industrial temperature grade (-40°C to +85°C, suffix I) makes the part suitable for factory automation, building controls, sensor interfaces, and instrumentation. The 'LF' extended voltage range (2.0V to 5.5V) is particularly attractive for battery-powered applications where energy harvesting or a single lithium cell powers the MCU.
Designers should note that the 'T' suffix is a packaging code (tape and reel) and does not change silicon behavior; the functional equivalent in tube packaging is PIC18LF1220-I/SO. This page synthesizes distributor pricing, drop-in alternatives, and design notes beyond what the manufacturer datasheet (DS39605) alone provides.
Аналоги без доработки для PIC18LF1220T-I/SO — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC18LF1220T-I/SO (тот же форм-фактор и посадочное место) — отличается по Operating Temperature, Core Architecture, Package, ADC, Communication.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC18LF1220-I/SO
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC18F1220-I/SO
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC18LF1320T-I/SO
✅ Прямая замена✓ В наличии
$2.65 / шт.
Открыть даташит →PIC18LF1220T-I/SO Максимальные параметры и электрические характеристики
| Core Architecture | PIC18 (8-bit RISC) |
| Program Memory (Flash) | 4 KB (2K x 16) |
| RAM | 256 bytes |
| Data EEPROM | 256 bytes |
| Maximum CPU Speed | 40 MHz (10 MIPS) |
| Operating Voltage Range | 2.0 V to 5.5 V (LF variant) |
| I/O Pins | 16 |
| ADC | 10-bit, up to 7 channels |
| PWM Modules | 10-bit PWM |
| Communication Interfaces | EUSART, MSSP (SPI / I²C) |
| Analog Comparators | 2 |
| Oscillator | Internal (and external support) |
| Рабочая температура | -40 °C to +85 °C (Industrial) |
| Корпус | 18-SOIC (SO) |
| Тип монтажа | Surface Mount |
| Packaging Media | Tape & Reel (T suffix) |
| Статус RoHS | Compliant |
| Programming / Debug | ICSP, ICD |
Конфигурация выводов PIC18LF1220T-I/SO
| Контакт 1 | RA2/AN2/VREF-/CVREF — Port A bit 2 / Analog input 2 / negative voltage reference / comparator reference output |
| Контакт 2 | RA3/AN3/VREF+ — Port A bit 3 / Analog input 3 / positive voltage reference |
| Контакт 3 | RA4/AN4/T0CKI — Port A bit 4 / Analog input 4 / Timer0 clock input |
| Контакт 4 | RA5/AN5/SS/HLVDIN — Port A bit 5 / Analog input 5 / SPI slave select / high/low voltage detect input |
| Контакт 5 | VSS — Ground reference |
| Контакт 6 | OSC1/CLKI/RA7 — Crystal oscillator input / external clock input / Port A bit 7 |
| Контакт 7 | OSC2/CLKO/RA6 — Crystal oscillator output / clock output / Port A bit 6 |
| Контакт 8 | RC0/T1OSO/T1CKI — Port C bit 0 / Timer1 oscillator output / Timer1 clock input |
| Контакт 9 | RC1/T1OSI/CCP2 — Port C bit 1 / Timer1 oscillator input / CCP2 PWM output |
| Контакт 10 | RC2/CCP1 — Port C bit 2 / CCP1 PWM output |
| Контакт 11 | RC3/SCK/SCL — Port C bit 3 / SPI clock / I²C clock |
| Контакт 12 | RC4/SDI/SDA — Port C bit 4 / SPI data in / I²C data |
| Контакт 13 | RC5/SDO — Port C bit 5 / SPI data out |
| Контакт 14 | RC6/TX/CK — Port C bit 6 / EUSART TX / EUSART clock |
| Контакт 15 | RC7/RX/DT — Port C bit 7 / EUSART RX / EUSART data |
| Контакт 16 | VSS (second) — Second ground pin (per datasheet) |
| Контакт 17 | VDD — Positive supply voltage (2.0–5.5 V) |
| Контакт 18 | RB7/PGD — Port B bit 7 / ICSP data / ICD data |
Типичное применение
PIC18LF1220T-I/SO подходит для 6 применениеs: Battery-Powered IoT Sensor Nodes, Industrial Sensor Interfaces, Home Appliance Control Boards, Automotive Body Electronics (Sub-System), Consumer Remote Controls and HMI, Portable Medical Monitoring Accessories.
Battery-Powered IoT Sensor Nodes
The PIC18LF1220T-I/SO fits battery-powered IoT sensor nodes thanks to its nanoWatt XLP technology and extended 2.0–5.5 V LF supply range. The 4 KB Flash accommodates small state-machine or RTOS firmware, while the 256-byte SRAM handles sensor buffers without external memory. The internal oscillator eliminates an external crystal, reducing BOM cost for coin-cell designs where every microamp of quiescent current matters for multi-year battery life.
Рекомендуется
Industrial Sensor Interfaces
In industrial sensor-interface modules, the PIC18LF1220T-I/SO digitizes analog signals through its 10-bit ADC with up to 7 input channels and drives 4–20 mA or RS-485 transceivers via EUSART. The industrial -40 °C to +85 °C temperature range supports factory-floor deployment, and the 10 MIPS core executes digital filtering and linearization routines without external logic. The 18-SOIC package is compatible with reflow profiles used in standard SMT lines.
Рекомендуется
Home Appliance Control Boards
The PIC18LF1220T-I/SO is well-suited to home appliance control boards such as coffee makers, small kitchen appliances, and HVAC actuators. Its 10-bit PWM drives TRIAC or MOSFET gate signals, while two analog comparators implement zero-crossing detection for line-powered loads. With 16 I/O pins, the MCU interfaces directly to keypads, LED indicators, and triac drivers without external glue logic, reducing total BOM cost.
Рекомендуется
Automotive Body Electronics (Sub-System)
Within non-safety automotive subsystems such as seat controllers, interior lighting, and accessory modules, the PIC18LF1220T-I/SO handles I/O expansion and PWM-driven lighting control. The PIC18LF1220 industrial grade supports cabin temperatures, and the 10-bit ADC reads battery monitoring and current sensing. For under-hood safety-critical ECUs, however, AEC-Q100-qualified parts such as PIC18F46K22-I/PT are required instead.
Рекомендуется
Consumer Remote Controls and HMI
The PIC18LF1220T-I/SO suits IR remote controls and small HMI panels that need 16 I/O pins to scan keypads and drive LED indicators or character LCDs. The MSSP peripheral implements SPI or I²C master modes to talk to OLED displays or external EEPROM, while the internal oscillator keeps board count low. The 'LF' low-voltage range supports direct 3 V lithium coin-cell operation without boost regulators.
Рекомендуется
Portable Medical Monitoring Accessories
Portable medical accessories such as pulse-oximeter dongles, pill dispensers, and fitness bands benefit from the PIC18LF1220T-I/SO's low-power nanoWatt XLP technology and 2.0–5.5 V supply range. The 10-bit ADC reads photodiode or thermistor front-ends, while the EUSART streams processed data to a host MCU or Bluetooth module. The industrial temperature grade suits body-worn applications between 0–50 °C ambient.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC18LF1220T-I/SO — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC18LF1220-I/SO | PIC18F1220-I/SO | PIC18LF1320T-I/SO |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 18-SOIC | 18-SOIC | 18-SOIC | 18-SOIC |
| Program Memory (Flash) | 4 KB | 4 KB | 4 KB | 8 KB |
| RAM | 256 bytes | 256 bytes | 256 bytes | 256 bytes |
| EEPROM | 256 bytes | 256 bytes | 256 bytes | 256 bytes |
| Operating Voltage | 2.0–5.5 V (LF) | 2.0–5.5 V (LF) | 4.2–5.5 V (F) | 2.0–5.5 V (LF) |
| Max CPU Speed | 40 MHz (10 MIPS) | 40 MHz (10 MIPS) | 40 MHz (10 MIPS) | 40 MHz (10 MIPS) |
| I/O Pins | 16 | 16 | 16 | 16 |
| ADC | 10-bit, 7 channels | 10-bit, 7 channels | 10-bit, 7 channels | 10-bit, 7 channels |
| Temperature Grade | -40 °C to +85 °C (Industrial) | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| Unit Price (qty 1) | USD 2.45 | USD 2.45 | USD 2.30 | USD 2.65 |
Ключевые отличия
- Extended 2.0 V low-voltage operation (LF process) (против PIC18F1220-I/SO)
- Doubled program memory in pin-compatible package (против PIC18LF1220-I/SO (4 KB sibling))
- Built-in nanoWatt XLP sleep modes (против PIC18LF1220-I/P (PDIP-18 sibling))
Заметки по проектированию
PIC18LF1220T-I/SO supports 2.0–5.5 V operation thanks to the LF process; however, low-voltage brown-out reset (BOR) must be enabled in CONFIG1L for battery designs. Without BOR enabled, the MCU may behave unpredictably as the supply droops below the safe operating threshold. Always place a 100 nF decoupling capacitor within 5 mm of the VDD pin and a 10 µF bulk capacitor near the supply entry.
Estimated: For an 18-SOIC MCU, reserve a continuous ground pour under the device and a 4 mm wide power trace to handle peak current during ADC conversions. Keep the ICSP/ICD pins (RB6/RB7) accessible in the layout so a debugger header can be added without board rework, since these pins also serve as digital I/O when not in debug mode.
PIC18LF1220 silicon errata (DS39605C) documents anomalies in early revisions; confirm revision level before locking down firmware. The 'T' suffix only changes packaging media (tape-and-reel), not silicon revision, so designers must read the device ID word at startup to detect older silicon and apply software workarounds where applicable.
When using the internal oscillator, place a 100 nF capacitor as close as possible to the VDD pin and avoid routing high-frequency signals (PWM, EUSART) parallel to the oscillator traces. For designs requiring precise baud rates, switch to an external crystal on OSC1/OSC2 and configure the FOSC bits in CONFIG1H accordingly.
Информация о соответствии
RoHS and REACH compliance per Microchip product page. Not AEC-Q100 qualified; for automotive safety applications, choose AEC-Q100-graded PIC18 variants. Halogen-free status not explicitly stated in the verified web data.