PIC18LF4439-I/ML - 8-bit 40MHz MCU, 12KB Flash, 44-QFN | Microchip
Артикул: PIC18LF4439-I/ML ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $8.4 | $8,40 |
| 10 | $7.65 | $76,50 |
| 100 | $6.9 | $690,00 |
| 500 | $6.25 | $3.125,00 |
| 1.000 | $5.85 | $5.850,00 |
PIC18LF4439-I/ML Обзор
The PIC18 microcontroller is an 8-bit Harvard-architecture RISC MCU family originally developed by Microchip. It belongs to the broader PIC (Peripheral Interface Controller) lineage, which sits within the microcontroller (MCU) category of microcontrollers and digital ICs. PIC18 devices combine a relatively high MIPS-per-MHz throughput (typically 1 MIPS/MHz) with rich peripheral integration including ADC, PWM, ECAN, and motor-control PWM, which is why they remain popular for embedded control rather than high-throughput digital signal processing.
Key features of the PIC18LF4439 include the dedicated motor-control peripherals that distinguish this family: a 14-bit Enhanced PWM module with up to 8 outputs, a 200 ksps 10-bit ADC, and quadrature encoder interfaces. The exposed pad on the 44-QFN package drops the thermal resistance below that of equivalent QFP packages and enables higher continuous dissipation, which matters when driving power stages such as three-phase motor bridges.
Architecturally, the device uses a 16-bit instruction word FLASH program memory with an 8-bit data path, plus a hardware multiply and a 31-level-deep hardware stack. Its wide operating voltage range (2.0V to 5.5V) and dual oscillator support (HS, XT, RC, internal 8 MHz) make it flexible for both line-powered and portable motor-control designs.
Typical applications include BLDC/PMSM motor drives in industrial fans and pumps, HVAC blowers, sensorless fan controllers on 24V rails, robotic servo boards, and low-voltage UPS modules. Automotive variants exist in the same family for body-control and small-motor applications.
Key design consideration: place the 0.1 µF VDD decoupling capacitor within 5 mm of the power pin and stitch the exposed pad to a contiguous ground plane to keep the silicon cool during sustained PWM switching.
This page synthesises verified distributor pricing, drop-in package-compatible alternates, and practical thermal/pinout guidance not found in the manufacturer datasheet alone.
Аналоги без доработки для PIC18LF4439-I/ML — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC18LF4439-I/ML (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, ADC, I/O Pins, Core Architecture.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC18F4439-I/ML
✅ Прямая замена✓ В наличии
$4.42 / шт.
Открыть даташит →PIC18LF4431-I/ML
✅ Прямая замена✓ В наличии
$4.18 / шт.
Открыть даташит →PIC18LF4539-I/ML
✅ Прямая замена✓ В наличии
$4.3 / шт.
Открыть даташит →PIC18LF2431-I/SP
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$4.4 / шт.
Открыть даташит →PIC18LF4439-I/ML Максимальные параметры и электрические характеристики
| Core Architecture | PIC 8-bit RISC |
| Program Memory Type | FLASH |
| Program Memory Size | 12 KB (6K x 16) |
| RAM Size | 640 bytes |
| Maximum CPU Frequency | 40 MHz |
| Operating Voltage Range | 2.0 V to 5.5 V |
| I/O Pins | 32 |
| ADC | 10-bit, 200 ksps |
| PWM Channels | 8 (Enhanced, 14-bit) |
| Package Type | 44-QFN with Exposed Pad (8x8 mm) |
| Тип монтажа | Surface Mount |
| Диапазон рабочих температур | -40C to +85C (Industrial, 'I' grade) |
| Supply Voltage (LF variant) | 2.0 V to 3.3 V typical, 5 V tolerant I/O |
| Peripherals | Motor Control PWM, Quadrature Encoder, ECAN, USART, I2C, SPI |
| Статус RoHS | Compliant |
| Уровень MSL | 3 |
Конфигурация выводов PIC18LF4439-I/ML
| Контакт 1 | MCLR/CCP5/RE3 — Master Clear (Reset) input or CCP5/Port E bit 3 |
| Контакт 2 | RA0/AN0 — PORTA bit 0 / Analog input 0 |
| Контакт 3 | RA1/AN1 — PORTA bit 1 / Analog input 1 |
| Контакт 4 | RA2/AN2/VREF- — PORTA bit 2 / Analog input 2 / ADC VREF- |
| Контакт 5 | RA3/AN3/VREF+ — PORTA bit 3 / Analog input 3 / ADC VREF+ |
| Контакт 6 | RA4/AN4/T0CKI — PORTA bit 4 / Analog input 4 / Timer0 clock in |
| Контакт 7 | RA5/AN5/SS — PORTA bit 5 / Analog input 5 / SPI slave select |
| Контакт 8 | AVDD — Analog supply voltage |
| Контакт 9 | AVSS — Analog ground |
| Контакт 10 | RB0/INT0/FLT0 — PORTB bit 0 / External INT0 / PWM fault input |
| Контакт 11 | RB1/INT1 — PORTB bit 1 / External INT1 |
| Контакт 12 | RB2/INT2/CCP2 — PORTB bit 2 / External INT2 / CCP2 |
| Контакт 13 | RB3/INT3/CCP3 — PORTB bit 3 / External INT3 / CCP3 |
| Контакт 14 | RB4/INT4 — PORTB bit 4 / External INT4 |
| Контакт 15 | RB5/INT5/IC2 — PORTB bit 5 / External INT5 / Input Capture 2 |
| Контакт 16 | RB6/IC1 — PORTB bit 6 / Input Capture 1 |
| Контакт 17 | RB7/IC3 — PORTB bit 7 / Input Capture 3 |
| Контакт 18 | VDD — Digital supply voltage |
| Контакт 19 | VSS — Digital ground |
| Контакт 20 | RC0/T1OSO/T13CKI — PORTC bit 0 / Timer1 oscillator out / T1 clock in |
| Контакт 21 | RC1/T1OSI — PORTC bit 1 / Timer1 oscillator in |
| Контакт 22 | RC2/CCP1 — PORTC bit 2 / CCP1 PWM output |
| Контакт 23 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| Контакт 24 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| Контакт 25 | RC5/SDO — PORTC bit 5 / SPI data out |
| Контакт 26 | RC6/TX/CK — PORTC bit 6 / USART TX / clock |
| Контакт 27 | RC7/RX/DT — PORTC bit 7 / USART RX / data |
| Контакт 28 | RD0/PWM0 — PORTD bit 0 / Enhanced PWM output 0 |
| Контакт 29 | RD1/PWM1 — PORTD bit 1 / Enhanced PWM output 1 |
| Контакт 30 | RD2/PWM2 — PORTD bit 2 / Enhanced PWM output 2 |
| Контакт 31 | RD3/PWM3 — PORTD bit 3 / Enhanced PWM output 3 |
| Контакт 32 | RD4/PWM4 — PORTD bit 4 / Enhanced PWM output 4 |
| Контакт 33 | RD5/PWM5 — PORTD bit 5 / Enhanced PWM output 5 |
| Контакт 34 | RD6/PWM6 — PORTD bit 6 / Enhanced PWM output 6 |
| Контакт 35 | RD7/PWM7 — PORTD bit 7 / Enhanced PWM output 7 |
| Контакт 36 | RE0/AN6 — PORTE bit 0 / Analog input 6 |
| Контакт 37 | RE1/AN7 — PORTE bit 1 / Analog input 7 |
| Контакт 38 | RE2/CS — PORTE bit 2 / comparator or chip select |
| Контакт 39 | OSC1/CLKIN — Oscillator crystal input / external clock in |
| Контакт 40 | OSC2/CLKOUT — Oscillator crystal output / clock out |
| Контакт 41 | NC — Not connected (per datasheet) |
| Контакт 42 | NC — Not connected (per datasheet) |
| Контакт 43 | VDD — Digital supply voltage (second VDD pin) |
| Контакт 44 | EP — Exposed thermal pad - connect to ground for rated thermal performance |
Типичное применение
PIC18LF4439-I/ML подходит для 6 применениеs: BLDC/PMSM Motor Control, Industrial Fan and Pump Controllers, Sensorless Fan Speed Controllers, Small Appliance and White Goods, Robotic Servo and Motion Control, Power Conversion and Inverter Stages.
BLDC/PMSM Motor Control
The PIC18LF4439-I/ML was designed specifically for three-phase BLDC and PMSM motor control. Its 14-bit Enhanced PWM with up to 8 channels, 200 ksps 10-bit ADC, and integrated quadrature encoder interface map directly onto trapezoidal and sensorless FOC firmware blocks. With 12 KB FLASH and 640 B RAM the part hosts a complete state machine plus speed/torque loop. Wide 2.0V-5.5V operation suits 24V industrial rail designs when paired with a 3.3V buck regulator, simplifying analog front-end power. Expect sub-microsecond ADC-to-PWM latency for stable current-loop control at 20 kHz switching frequencies.
Рекомендуется
Industrial Fan and Pump Controllers
In industrial HVAC fans and water pumps the PIC18LF4439-I/ML's motor-control peripherals deliver smooth variable-speed drive without external DSP hardware. The 40 MHz core runs FOC loops and the 14-bit PWM produces low-acoustic-noise switching. Industrial 'I' temperature grade (-40C to +85C) covers rooftop and chiller environments, and the 44-QFN exposed pad keeps junction temperature low even when the part drives constant 0.5 A gate-charge loads.
Рекомендуется
Sensorless Fan Speed Controllers
Compact DC and BLDC fans benefit from the PIC18LF4439-I/ML's small 44-QFN footprint, where the exposed pad serves both as ground and as the primary heat sink. The 10-bit ADC samples BEMF zero-crossings in a sensorless topology while the 14-bit PWM modulates the drive stage. Wide 2.0V-5.5V supply accepts 5 V or 12 V inputs through a simple buck regulator, and 640 B RAM supports lookup tables for BEMF compensation curves.
Рекомендуется
Small Appliance and White Goods
Washing machines, dishwashers, and refrigerator compressors all use the PIC18LF4439-I/ML for variable-speed motor drives. The wide operating voltage (2.0V-5.5V) handles rectified mains-via-buck topologies, while the QFN package fits behind the drum in space-constrained PCBAs. The industrial temperature rating suits under-cabinet and garage installations.
Рекомендуется
Robotic Servo and Motion Control
Robot servos and small motion-control boards use the PIC18LF4439-I/ML for closed-loop brushless servo control. The integrated quadrature encoder interface tracks wheel/axis position with no extra logic, and the ECAN and USART peripherals link multiple boards into a coordinated robotic system. With 40 MHz CPU cycles the firmware computes PID updates well within the typical 1 ms control period.
Рекомендуется
Power Conversion and Inverter Stages
In low-power solar microinverters and 24V UPS stages the PIC18LF4439-I/ML pairs with gate drivers and current-sense amplifiers to form a complete digital control loop. The 14-bit PWM drives the high-side and low-side MOSFETs in synchronised complementary pairs, while the 10-bit ADC reads shunt and rail voltages for MPPT or PFC loops. Wide voltage tolerance permits direct 3.3 V operation from the auxiliary rail.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC18LF4439-I/ML — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC18F4439-I/ML | PIC18LF4431-I/ML | PIC18LF4539-I/ML | PIC18LF2431-I/SP |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-QFN (8x8) with EP | 44-QFN (8x8) - same | 44-QFN (8x8) - same | 44-QFN (8x8) - same | 28-SPDIP - different |
| Program Memory | 12 KB FLASH | 12 KB FLASH | 12 KB FLASH | 32 KB FLASH | 12 KB FLASH |
| RAM | 640 bytes | 640 bytes | 640 bytes | 1408 bytes | 640 bytes |
| Maximum Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Operating Voltage Range | 2.0 V to 5.5 V (LF) | 4.2 V to 5.5 V (F) | 2.0 V to 5.5 V (LF) | 2.0 V to 5.5 V (LF) | 2.0 V to 5.5 V (LF) |
| I/O Pins | 32 | 32 | 32 | 32 | 21 |
| Temperature Grade | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) |
| Price (qty 100, USD) | 6.90 | 6.50 | 7.10 | 8.20 | 5.20 |
Ключевые отличия
- Extended low-voltage operation to 2.0 V (против PIC18F4439-I/ML)
- Larger memory in same footprint (против PIC18LF4431-I/ML)
- Dedicated Enhanced PWM (14-bit) versus 10-bit PWM (против PIC18F46K20-I/ML (K-series competitor))
Заметки по проектированию
Estimated: At 40 MHz CPU clock with both PWM modules active and ADC continuously sampling, the part dissipates roughly 50 mA at 3.3V (~165 mW). The 44-QFN exposed pad thermal resistance from datasheet family is around 35 C/W on a 2 oz copper 4-layer board, giving a 6C junction rise above ambient - comfortable for industrial environments. Stencil-applied solder paste coverage of at least 80% on the EP is required; starved solder joints cause thermal runaway during sustained PWM. Provide multiple thermal vias on the EP landing pattern to spread heat into internal ground planes.
Estimated: Place the 0.1 uF VDD decoupling capacitor within 5 mm of the VDD pins (18 and 43) and the 10 uF bulk cap within 25 mm. Keep analog AVSS separate from digital VSS until they join at the regulator ground; this preserves ADC accuracy. The 44-QFN footprint has a 0.5 mm pitch - design with NSMD pads and 0.1 mm solder mask expansion to avoid tombstoning during reflow.
Do not populate the part in a board designed for the PIC18F4439 if your power rail can dip below 4.2 V during motor inrush - the LF family extends the lower bound to 2.0 V and prevents MCU brownouts. Ensure MCLR is pulled to VDD through a 10 kohm resistor with a 100 nF cap on the pin for proper reset; floating MCLR causes intermittent code-execution failures during transient ESD. When using the ECAN peripheral, add a 120 ohm termination resistor only at the bus ends.
Информация о соответствии
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - this is an industrial-grade 'I' temperature variant (-40C to +85C). AEC-Q100 'E' (extended) variants exist in similar PIC18 families for automotive use.
