PIC18LF4510T-I/PT - 8-bit 40MHz 32KB Flash MCU | Microchip TQFP-44
Артикул: PIC18LF4510T-I/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $6.85 | $6,85 |
| 10 | $6.17 | $61,70 |
| 100 | $5.48 | $548,00 |
| 500 | $4.93 | $2.465,00 |
| 1.000 | $4.39 | $4.390,00 |
PIC18LF4510T-I/PT Обзор
A PIC microcontroller is a compact, self-contained computer-on-a-chip built around a Harvard-architecture RISC core with on-board Flash, RAM, EEPROM, and a rich set of peripherals (ADC, timers, UART, I2C, SPI, PWM, etc.). Microcontrollers belong to the broader hierarchy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. PIC18F devices sit in Microchip's high-performance 8-bit tier, above the baseline PIC10/12/16 families, and are widely used in cost-sensitive embedded designs where deterministic behavior, low power, and abundant peripheral integration are required.
Key features of the PIC18LF4510 include a 10-bit ADC with up to 13 input channels, two 8-bit timers plus three 16-bit timers, two analog comparators, one MSSP (SPI/I2C) and one enhanced USART, an 8/16-bit parallel slave port, and a 10-bit PWM module. The device includes 256 bytes of EEPROM for non-volatile data storage and supports In-Circuit Serial Programming (ICSP) plus In-Circuit Debug (ICD).
The PIC18F core delivers 16-bit wide instructions and an 8-bit data path with a hardware multiplier, providing ~10 MIPS peak throughput at 40 MHz. The 'LF' extended voltage range (2.0V-5.5V) enables battery-powered or energy-harvesting applications, while the wide operating temperature range of -40C to +85C suits industrial environments. Internal oscillator options and nanoWatt power management modes reduce quiescent current for sleep scenarios.
Typical applications for the PIC18LF4510T-I/PT include industrial control panels, HVAC sensor interfaces, low-power handheld instruments, automotive body modules, and consumer appliances. It is also well-suited to sensor nodes, motor control peripherals, and human-machine interface (HMI) boards where its 36 I/Os and 10-bit ADC cover most mid-complexity analog/digital needs without the cost of a 32-bit MCU.
When designing with this part, ensure decoupling capacitors are placed close to VDD/VSS pairs and that the ICSP/ICD pins are accessible on the PCB for firmware updates. The wide 2.0V-5.5V supply range allows direct connection to a single-cell Li-ion pack (with regulator) or a 3.3V regulated rail, simplifying power tree design.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone. As of 2026-09-28, the part is active in Microchip's product line and sourced through 9+ distributors per Octopart.
Аналоги без доработки для PIC18LF4510T-I/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC18LF4510T-I/PT (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, Timers, Mounting Type, Core Architecture.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC18LF4510-I/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC18LF4510-I/P
✅ Прямая замена✓ В наличии
$5.34 / шт.
Открыть даташит →PIC18LF4610-I/PT
✅ Прямая замена✓ В наличии
$5.2 / шт.
Открыть даташит →PIC18LF4515-I/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC18LF4410-I/PT
✅ Прямая замена✓ В наличии
$4.18 / шт.
Открыть даташит →PIC18LF4420-I/PT
✅ Прямая замена✓ В наличии
$5.71 / шт.
Открыть даташит →PIC18LF4510T-I/PT Максимальные параметры и электрические характеристики
| Core Architecture | PIC18 (8-bit RISC, Harvard) |
| Program Memory (Flash) | 32 KB (16K x 16) |
| Data RAM | 1.5 KB (1536 bytes) |
| Data EEPROM | 256 bytes |
| Максимальная тактовая частота | 40 MHz |
| Operating Voltage Range | 2.0 V to 5.5 V |
| Number of I/O Pins | 36 |
| ADC Resolution | 10-bit |
| Timers | 2 x 8-bit + 3 x 16-bit |
| Communication Interfaces | 1x MSSP (SPI/I2C), 1x EUSART |
| Analog Comparators | 2 |
| Parallel Slave Port | Yes (8/16-bit) |
| Рабочая температура | -40C to +85C (Industrial) |
| Корпус | 44-pin TQFP (10x10 mm) |
| Тип монтажа | Surface Mount (Tape & Reel) |
| Programming/Debug | ICSP + ICD |
| Статус RoHS | Compliant |
Конфигурация выводов PIC18LF4510T-I/PT
| Контакт 1 | OSC1/CLKI/RA7 — Crystal oscillator input / external clock input / digital I/O RA7 |
| Контакт 2 | OSC2/CLKO/RA6 — Crystal oscillator output / clock output / digital I/O RA6 |
| Контакт 3 | MCLR/VPP/RE3 — Master clear reset (active low) / programming voltage / digital input RE3 |
| Контакт 4 | RA0/AN0 — Digital I/O RA0 / analog input AN0 |
| Контакт 5 | RA1/AN1 — Digital I/O RA1 / analog input AN1 |
| Контакт 6 | RA2/AN2/VREF- — Digital I/O RA2 / analog input AN2 / ADC VREF- |
| Контакт 7 | RA3/AN3/VREF+ — Digital I/O RA3 / analog input AN3 / ADC VREF+ |
| Контакт 8 | RA4/T0CKI — Digital I/O RA4 / Timer0 clock input |
| Контакт 9 | RA5/AN4/SS — Digital I/O RA5 / analog input AN4 / SPI slave select |
| Контакт 10 | VSS — Ground reference |
| Контакт 11 | VDD — Positive supply (2.0V to 5.5V) |
| Контакт 12 | RB0/INT0/FLT0 — Digital I/O RB0 / external interrupt 0 / PWM fault input |
| Контакт 13 | RB1/INT1 — Digital I/O RB1 / external interrupt 1 |
| Контакт 14 | RB2/INT2 — Digital I/O RB2 / external interrupt 2 |
| Контакт 15 | RB3/INT3/CCP2A — Digital I/O RB3 / external interrupt 3 / CCP2 output A |
| Контакт 16 | RB4/KBI0 — Digital I/O RB4 / keyboard interrupt 0 |
| Контакт 17 | RB5/KBI1/PGM — Digital I/O RB5 / keyboard interrupt 1 / LVP programming |
| Контакт 18 | RB6/KBI2/PGC — Digital I/O RB6 / keyboard interrupt 2 / ICSP clock |
| Контакт 19 | RB7/KBI3/PGD — Digital I/O RB7 / keyboard interrupt 3 / ICSP data |
| Контакт 20 | VSS — Ground reference |
| Контакт 21 | VDD — Positive supply (2.0V to 5.5V) |
| Контакт 22 | RC0/T1OSO/T1CKI — Digital I/O RC0 / Timer1 oscillator output / Timer1 clock input |
| Контакт 23 | RC1/T1OSI/CCP2B — Digital I/O RC1 / Timer1 oscillator input / CCP2 output B |
| Контакт 24 | RC2/CCP1 — Digital I/O RC2 / CCP1 PWM output |
| Контакт 25 | RC3/SCK/SCL — Digital I/O RC3 / SPI clock / I2C clock |
| Контакт 26 | RC4/SDI/SDA — Digital I/O RC4 / SPI data in / I2C data |
| Контакт 27 | RC5/SDO — Digital I/O RC5 / SPI data out |
| Контакт 28 | RC6/TX/CK — Digital I/O RC6 / EUSART TX / EUSART clock |
| Контакт 29 | RC7/RX/DT — Digital I/O RC7 / EUSART RX / EUSART data |
| Контакт 30 | VSS — Ground reference |
| Контакт 31 | VDD — Positive supply (2.0V to 5.5V) |
| Контакт 32 | RD0/PSP0 — Digital I/O RD0 / parallel slave port data bit 0 |
| Контакт 33 | RD1/PSP1 — Digital I/O RD1 / parallel slave port data bit 1 |
| Контакт 34 | RD2/PSP2 — Digital I/O RD2 / parallel slave port data bit 2 |
| Контакт 35 | RD3/PSP3 — Digital I/O RD3 / parallel slave port data bit 3 |
| Контакт 36 | RD4/PSP4 — Digital I/O RD4 / parallel slave port data bit 4 |
| Контакт 37 | RD5/PSP5/P1B — Digital I/O RD5 / parallel slave port data bit 5 / PWM output 1B |
| Контакт 38 | RD6/PSP6/P1C — Digital I/O RD6 / parallel slave port data bit 6 / PWM output 1C |
| Контакт 39 | RD7/PSP7/P1D — Digital I/O RD7 / parallel slave port data bit 7 / PWM output 1D |
| Контакт 40 | VSS — Ground reference |
| Контакт 41 | VDD — Positive supply (2.0V to 5.5V) |
| Контакт 42 | RE0/RD/AN5 — Digital I/O RE0 / parallel slave port read / analog input AN5 |
| Контакт 43 | RE1/WR/AN6 — Digital I/O RE1 / parallel slave port write / analog input AN6 |
| Контакт 44 | RE2/CS/AN7 — Digital I/O RE2 / parallel slave port chip select / analog input AN7 |
Типичное применение
PIC18LF4510T-I/PT подходит для 6 применениеs: Industrial Control Panels, HVAC Sensor Interfaces, Low-Power Handheld Instruments, Automotive Body Modules, Consumer Appliance Controllers, Sensor Hubs and Data Loggers.
Industrial Control Panels
The PIC18LF4510T-I/PT fits industrial control panel applications because its 36 I/Os can drive multiple relays, keypads, and 7-segment displays while the 10-bit ADC handles analog sensor inputs. With 32 KB Flash and 1.5 KB RAM, it is suitable for ladder-logic replacements and small SCADA node firmware. The wide 2.0V-5.5V supply simplifies power-tree design when interfacing to 24 V industrial buses via a single regulator, and the -40C to +85C industrial temperature range ensures reliable operation in factory environments.
Рекомендуется
HVAC Sensor Interfaces
For HVAC sensor interface boards, the PIC18LF4510T-I/PT provides multiple ADC channels for thermistors, pressure transducers, and humidity sensors. Its 16-bit timer can drive triac-based phase-angle control for AC loads, while the PWM module regulates DC fan speed. The 256-byte EEPROM stores calibration constants across power cycles. The wide operating voltage (2.0V-5.5V) supports both 24 VAC-derived DC rails and battery backup configurations.
Рекомендуется
Low-Power Handheld Instruments
The PIC18LF4510T-I/PT is well-suited to low-power handheld instruments because its nanoWatt power-managed modes reduce quiescent current below 1 uA in sleep, and the 2.0V-5.5V LF voltage range enables direct operation from a single 3.7 V Li-ion cell. With 32 KB Flash, it can host measurement firmware, calibration tables, and a small graphics LCD driver. The 36 I/Os accommodate button matrices, rotary encoders, and segmented LCDs.
Рекомендуется
Automotive Body Modules
For automotive body modules like seat controllers, mirror adjusters, and lighting drivers, the PIC18LF4510T-I/PT provides sufficient I/O for H-bridge drivers and switch matrixes. Its 40 MHz performance handles LIN-style software UART plus the dedicated EUSART, while PWM channels regulate motor current. For under-hood or AEC-Q100 qualified applications, the PIC18LF4610-I/PT is preferred for additional Flash headroom. Note: this part is industrial-grade (-40 to +85C), not AEC-Q100 qualified.
Рекомендуется
Consumer Appliance Controllers
The PIC18LF4510T-I/PT fits consumer appliance controllers (small kitchen appliances, washing machine sub-modules, vacuum robot sensor hubs) due to its low BOM cost, integrated peripherals, and Flash firmware upgradeability via ICSP. The MSSP drives SPI displays or I2C sensor arrays, while the parallel slave port allows connection to a host SoC for richer appliances. The 32 KB Flash accommodates user-interface state machines and safety logic.
Рекомендуется
Sensor Hubs and Data Loggers
For multi-sensor data loggers, the PIC18LF4510T-I/PT aggregates data from I2C/SPI sensors, runs basic filtering, and stores samples to external EEPROM via MSSP. The 10-bit ADC monitors battery voltage and analog sensors, while the EUSART streams logs to a host PC. With 1.5 KB RAM and 256-byte internal EEPROM, transient buffering is feasible; deep logs spill to an external 24LC256 EEPROM. The 40 MHz clock enables real-time sensor fusion at 100+ Hz.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC18LF4510T-I/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC18LF4510-I/PT | PIC18LF4610-I/PT | PIC18LF4515-I/PT | |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | |
| Package | 44-TQFP (10x10 mm) | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same |
| Flash Memory | 32 KB | 32 KB | 48 KB (+50%) | 24 KB (-25%) | 16 KB (-50%) |
| Data RAM | 1.5 KB | 1.5 KB | 1.5 KB | 1.5 KB | 1.5 KB |
| Operating Voltage | 2.0 V to 5.5 V (LF) | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| Maximum Clock | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Number of I/Os | 36 | 36 | 36 | 36 | 36 |
| ADC Resolution | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Ключевые отличия
- Drop-in memory upgrade path within same package (против PIC18LF4610-I/PT)
- Wide LF operating voltage range (против PIC18F4510-I/PT)
- 36 I/Os with parallel slave port (против PIC18LF4410-I/PT (same 44-TQFP))
Заметки по проектированию
Decouple each VDD/VSS pair with a 100 nF ceramic capacitor placed within 3 mm of the MCU pins; add a bulk 10 uF tantalum or ceramic at the regulator output. The LF part tolerates 2.0V-5.5V so you can run from a single Li-ion cell + boost regulator or a 3.3V LDO. Avoid dV/dt transients above 50 V/us on VDD - these can trigger POR or BOR resets. For battery operation, use Sleep mode (Ipd < 1 uA) and wake via Watchdog Timer or external interrupt on RB0.
Estimated: The 44-TQFP has 0.8 mm pin pitch; route all signals on inner layers or use fine-pitch escape. Reserve a 6 mm x 6 mm copper pad directly under the package to act as thermal relief (theta_JA improves by ~15% with the pad). Keep crystal traces within 5 mm of OSC1/OSC2 with a guard ground around them. The ICSP pins (RB6/PGC, RB7/PGD) must be accessible via test pads or header for firmware updates during production.
Do not leave MCLR floating - tie to VDD via a 10 kohm resistor for normal operation, or direct to VDD if unused. The LF prefix means 2.0V minimum - going below this (e.g. 1.8V brownout) triggers BOR. When migrating from PIC18F4510 to PIC18LF4510, check that any 5V-only analog references are compatible - VREF+ can be up to VDD+0.3V only. Configuration words (CONFIG1H-4L) must be set correctly to enable the internal oscillator or fail-safe clock monitor.
The 10-bit ADC requires careful PCB layout to achieve datasheet accuracy. Use a ground plane under the MCU, keep analog traces short and away from switching signals, and place a 100 nF + 10 uF decoupling pair at AVDD/AVSS if the package variant exposes them. Sample-and-hold acquisition time must be configured per the ADC clock and source impedance - at 40 MHz ADC clock use a minimum of 1.2 us acquisition for sources under 10 kohm.
Информация о соответствии
RoHS compliant per Microchip product page. Not AEC-Q100 qualified (industrial grade only, -40C to +85C). For automotive applications, choose AEC-Q100 qualified variants in the same family.