PIC18LF4580-I/P - 8-Bit 40MHz 32KB Flash MCU w/ CAN | Microchip
Артикул: PIC18LF4580-I/P ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $7.45 | $7,45 |
| 10 | $6.82 | $68,20 |
| 100 | $6.05 | $605,00 |
| 500 | $5.4 | $2.700,00 |
| 1.000 | $4.85 | $4.850,00 |
PIC18LF4580-I/P Обзор
A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and programmable I/O peripherals. The PIC18 family sits in Microchip's 8-bit mid-range portfolio - positioned above baseline PIC10/12/16 parts and below the 16-bit PIC24/dsPIC families - and is widely adopted in industrial control, automotive, and CAN-bus-connected embedded applications. The integrated ECAN module sets the PIC18LF4580 apart from general-purpose 8-bit MCUs, enabling it to participate directly on Controller Area Networks without an external transceiver-controller pair.
Key features include 32 KB Flash program memory, 1536 bytes of RAM, 256 bytes of EEPROM, 36 digital I/O pins, and a 10-bit ADC with up to 11 channels. Peripherals include enhanced USART, MSSP (I²C/SPI), enhanced CAN (ECAN), capture/compare/PWM (ECCP) modules, and multiple timers. The LF variant operates across 2.0V-5.5V, with 40 MHz CPU clock from the integrated 10 MHz phase-locked-loop oscillator.
The PIC18F4580 uses an enhanced Harvard RISC architecture with a 16-bit instruction word, 8-bit data path, hardware multiplier, and a 32-level hardware stack. The ECAN peripheral supports CAN 2.0B active with multiple transmit/receive buffers, filters, and masks. Internal oscillator modes (8 MHz, 4 MHz, 32 kHz, and PLL) reduce external component count and improve noise immunity in industrial environments.
Typical applications include industrial CAN node controllers, automotive body and chassis ECUs, sensor data acquisition nodes, HVAC control boards, building automation gateways, and battery-powered instrumentation. The combination of integrated CAN, generous I/O count, and wide operating voltage make the part especially popular in legacy industrial and automotive designs predating the shift to 32-bit ARM Cortex-M MCUs.
When designing with this part, ensure the ICSP/ICD pins (RB6/RB7 or dedicated PGC/PGD on larger packages) are accessible for in-circuit programming and debugging. The 40-pin PDIP package is friendly for prototyping and rework but consumes significant PCB area; consider the TQFP-44 (PT) or QFN-44 (ML) variants of the same die for production layouts.
This page synthesizes verified distributor pricing, drop-in and same-die alternatives sourced from Microchip's own part numbering system, and practical design notes not always called out in the manufacturer datasheet.
Аналоги без доработки для PIC18LF4580-I/P — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC18LF4580-I/P (тот же форм-фактор и посадочное место) — отличается по Package, Program Memory (Flash), ADC, Data EEPROM, Core Architecture.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC18F4580-I/P
✅ Прямая замена✓ В наличии
$5.1 / шт.
Открыть даташит →PIC18LF4480-I/P
✅ Прямая замена✓ В наличии
$5.49 / шт.
Открыть даташит →PIC18LF4585-I/P
✅ Прямая замена✓ В наличии
$5.55 / шт.
Открыть даташит →PIC18F46K80-I/P
✅ Прямая замена✓ В наличии
$4.78 / шт.
Открыть даташит →PIC18F4580-E/P
✅ Прямая замена✓ В наличии
$4.41 / шт.
Открыть даташит →PIC18LF4580-I/P Максимальные параметры и электрические характеристики
| Core Processor | PIC |
| Core Size | 8-bit |
| Series | PIC® 18F |
| Maximum CPU Speed | 40 MHz |
| Program Memory Size | 32 KB (16K x 16) Flash |
| RAM Size | 1536 bytes |
| EEPROM Size | 256 bytes |
| Number of I/O Pins | 36 |
| Connectivity | CANbus, I²C, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| ADC | 10-bit, up to 11 channels |
| Напряжение питания | 2.0 V to 5.5 V (LF variant) |
| Рабочая температура | -40 °C to +85 °C (Industrial) |
| Корпус | 40-PDIP (P) |
| Тип монтажа | Through-Hole |
| Lead Free / RoHS | Yes (P suffix = lead-free, RoHS-compliant) |
| CAN Module | ECAN (Enhanced CAN 2.0B active) |
| Internal Oscillator | 8 MHz / 32 kHz with 4x PLL |
Конфигурация выводов PIC18LF4580-I/P
| Контакт 1 | MCLR/VPP/RE3 — Master Clear (reset) input or programming voltage; RE3 digital input on some devices |
| Контакт 2 | RA0/AN0 — PORTA bit 0 / analog input channel 0 |
| Контакт 3 | RA1/AN1 — PORTA bit 1 / analog input channel 1 |
| Контакт 4 | RA2/AN2/VREF- — PORTA bit 2 / analog input channel 2 / ADC VREF- |
| Контакт 5 | RA3/AN3/VREF+ — PORTA bit 3 / analog input channel 3 / ADC VREF+ |
| Контакт 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| Контакт 7 | RA5/AN4/SS — PORTA bit 5 / analog input channel 4 / SPI slave select |
| Контакт 8 | RE0/RD/AN5 — PORTE bit 0 / read strobe for parallel slave port / analog input channel 5 |
| Контакт 9 | RE1/WR/AN6 — PORTE bit 1 / write strobe for PSP / analog input channel 6 |
| Контакт 10 | RE2/CS/AN7 — PORTE bit 2 / chip select for PSP / analog input channel 7 |
| Контакт 11 | VDD — Positive supply voltage (2.0 V to 5.5 V on LF variant) |
| Контакт 12 | VSS — Ground reference |
| Контакт 13 | OSC1/CLKI — Oscillator crystal input / external clock input |
| Контакт 14 | OSC2/CLKO/RA6 — Oscillator crystal output / clock output / PORTA bit 6 |
| Контакт 15 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock input |
| Контакт 16 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 I/O |
| Контакт 17 | RC2/CCP1 — PORTC bit 2 / Enhanced CCP1 I/O |
| Контакт 18 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I²C clock |
| Контакт 19 | RD0/PSP0/C1IN+ — PORTD bit 0 / PSP data bit 0 / comparator 1 input+ |
| Контакт 20 | RD1/PSP1/C1IN- — PORTD bit 1 / PSP data bit 1 / comparator 1 input- |
| Контакт 21 | RD2/PSP2/C2IN+ — PORTD bit 2 / PSP data bit 2 / comparator 2 input+ |
| Контакт 22 | RD3/PSP3/C2IN- — PORTD bit 3 / PSP data bit 3 / comparator 2 input- |
| Контакт 23 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I²C data |
| Контакт 24 | RC5/SDO — PORTC bit 5 / SPI data out |
| Контакт 25 | RC6/TX/CK — PORTC bit 6 / USART async transmit / USART sync clock |
| Контакт 26 | RC7/RX/DT — PORTC bit 7 / USART async receive / USART sync data |
| Контакт 27 | RD4/PSP4/ECCP1/P1A — PORTD bit 4 / PSP data bit 4 / ECCP1 output / PWM P1A |
| Контакт 28 | RD5/PSP5/P1B — PORTD bit 5 / PSP data bit 5 / ECCP1 PWM P1B |
| Контакт 29 | RD6/PSP6/P1C — PORTD bit 6 / PSP data bit 6 / ECCP1 PWM P1C |
| Контакт 30 | RD7/PSP7/P1D — PORTD bit 7 / PSP data bit 7 / ECCP1 PWM P1D |
| Контакт 31 | VSS — Ground reference |
| Контакт 32 | VDD — Positive supply voltage |
| Контакт 33 | RB0/INT0/FLT0 — PORTB bit 0 / external interrupt 0 / ECCP fault input |
| Контакт 34 | RB1/INT1 — PORTB bit 1 / external interrupt 1 |
| Контакт 35 | RB2/INT2/CANTX — PORTB bit 2 / external interrupt 2 / CAN bus transmit |
| Контакт 36 | RB3/INT3/CANRX — PORTB bit 3 / external interrupt 3 / CAN bus receive |
| Контакт 37 | RB4 — PORTB bit 4 (interrupt-on-change) |
| Контакт 38 | RB5 — PORTB bit 5 (interrupt-on-change) |
| Контакт 39 | RB6/PGC — PORTB bit 6 (interrupt-on-change) / ICSP clock |
| Контакт 40 | RB7/PGD — PORTB bit 7 (interrupt-on-change) / ICSP data |
Типичное применение
PIC18LF4580-I/P подходит для 7 применениеs: Industrial CAN Sensor Node, Automotive Body Control Module, Battery-Powered Data Logger, Building Automation Gateway, HVAC Control Board, CAN-Based Motor Drive Controller, Educational / Development Platform.
Industrial CAN Sensor Node
The PIC18LF4580-I/P's integrated ECAN 2.0B controller and 36 I/O pins make it a strong fit for industrial CAN sensor nodes monitoring pressure, flow, temperature, or vibration. With 32 KB Flash and 1536 B RAM, the part supports a CANopen or DeviceNet slave stack alongside sensor conditioning routines. At 40 MHz (10 MIPS), the MCU handles 10 ms polling loops and CAN message transmission without throughput strain. The 2.0 V-5.5 V range simplifies 3.3 V sensor rail designs, while the 40-pin PDIP package is ideal for hand-soldered industrial prototype boards where rework access matters.
Рекомендуется
Automotive Body Control Module
The PIC18LF4580 family is widely deployed in non-safety automotive body controllers (window lifters, mirror adjusters, HVAC blend doors) where integrated ECAN reduces BOM and the wide temperature range tolerates cabin thermal stress. The 10-bit ADC with up to 11 channels digitizes potentiometer positions and thermistor inputs for closed-loop motor control, while the ECCP/PWM module drives small DC motor H-bridges. Designers choose the PIC18LF4580-I/P for prototyping and the AEC-Q100 qualified PIC18F4580-I/PT variant for production automotive builds using the same firmware and pinout.
Рекомендуется
Battery-Powered Data Logger
The LF (low-voltage) suffix denotes 2.0 V-5.5 V operation, allowing the PIC18LF4580-I/P to run directly from two AA alkaline cells or a single Li-ion cell down to its cut-off voltage without boost conversion. The integrated 10-bit ADC samples sensor data while the ECAN module remains ready for diagnostic bus queries, and the on-chip 8 MHz / 32 kHz oscillators reduce external parts count - critical for long-runtime, low-maintenance data loggers. Sleep current and peripheral gating extend battery life, while 32 KB Flash holds weeks of timestamped measurement records before offload.
Рекомендуется
Building Automation Gateway
The PIC18LF4580-I/P acts as a low-cost CAN-to-UART/Ethernet bridging node in building automation systems, routing BACnet, Modbus, or proprietary protocols between field sensors and a building management controller. Its 36 I/O lines drive status LEDs, keypads, and relay outputs while the ECAN module terminates a sub-bus of HVAC or lighting controllers. The 1536 B RAM handles protocol buffers and the 32 KB Flash accommodates custom routing tables. Through-hole PDIP packaging simplifies field-serviceable installation in electrical cabinets.
Рекомендуется
HVAC Control Board
Commercial and residential HVAC controllers use the PIC18LF4580-I/P to read multiple thermistor inputs via its 10-bit ADC, drive triac-fired blower and compressor outputs via PWM/ECCP, and communicate with indoor unit networks over CAN. The wide 2.0 V-5.5 V supply tolerates 24 VAC-derived rails after rectification, and the -40 °C to +85 °C industrial temperature grade supports unconditioned equipment-room installation. Through-hole PDIP is preferred by HVAC OEMs for wave-soldered production lines and field-replaceable serviceability.
Рекомендуется
CAN-Based Motor Drive Controller
Small brushless DC and stepper motor controllers in industrial automation use the PIC18LF4580-I/P as the supervisory MCU, accepting torque/speed commands over CAN and generating PWM via the ECCP module to gate the power-stage FETs. The hardware ECAN offloads message filtering from the CPU, freeing cycles for current-loop math at 10 MIPS. The 36 I/O pins interface Hall sensors, encoders, fault comparators, and brake/coast outputs, while the 32 KB Flash holds field-oriented control (FOC) firmware for low-power sub-1 kW drives.
Рекомендуется
Educational / Development Platform
The PIC18LF4580-I/P in 40-pin PDIP is a popular teaching and prototyping MCU because the through-hole package fits breadboards and is hand-solderable, while the integrated ECAN exposes students to real industrial networking protocols without extra ICs. The 32 KB Flash and 1536 B RAM comfortably hold student projects involving CAN, ADC, PWM, and I²C peripherals, and the MPLAB X IDE + XC8 toolchain is free for educational use. Many university mechatronics and embedded systems labs standardize on the PIC18F4580 family for CAN coursework.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC18LF4580-I/P — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC18F4580-I/P | PIC18LF4480-I/P | PIC18LF4585-I/P | PIC18F46K80-I/P | PIC18F4580-E/P |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 40-PDIP | 40-PDIP - same | 40-PDIP - same | 40-PDIP - same | 40-PDIP - same | 40-PDIP - same |
| Flash Program Memory | 32 KB | 32 KB | 16 KB (-50%) | 48 KB (+50%) | 64 KB (+100%) | 32 KB |
| RAM | 1536 bytes | 1536 bytes | 768 bytes (-50%) | 3328 bytes (+117%) | 3648 bytes (+138%) | 1536 bytes |
| Supply Voltage | 2.0 V to 5.5 V (LF) | 4.2 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 1.8 V to 5.5 V | 4.2 V to 5.5 V |
| CPU Speed | 40 MHz / 10 MIPS | 40 MHz / 10 MIPS | 40 MHz / 10 MIPS | 40 MHz / 10 MIPS | 64 MHz / 16 MIPS | 40 MHz / 10 MIPS |
| CAN Module | ECAN 2.0B active | ECAN 2.0B active | ECAN 2.0B active | ECAN 2.0B active | ECAN 2.0B active (improved) | ECAN 2.0B active |
| Operating Temperature | -40 °C to +85 °C (Industrial) | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +125 °C (Extended) |
| EEPROM | 256 bytes | 256 bytes | 256 bytes | 256 bytes | 1024 bytes (+300%) | 256 bytes |
Ключевые отличия
- Wide 2.0 V-5.5 V supply range with integrated ECAN (против PIC18F4580-I/P)
- 32 KB Flash + 1536 B RAM in the original PIC18F4580 footprint (против PIC18LF4480-I/P)
- Integrated ECAN with 32 KB Flash, no external controller needed (против PIC18F46K80-I/P)
Заметки по проектированию
The PIC18LF4580-I/P supports 2.0 V-5.5 V operation, but decoupling must follow Microchip's recommended pattern: place a 100 nF ceramic capacitor within 6 mm of each VDD/VSS pair (pins 11/12 and 31/32) and add a 10 µF bulk tantalum or ceramic at the board supply entry. The dual VDD/VSS pin pairs (11/12 and 31/32) must both be connected; floating one pair causes digital noise on the ADC reference and intermittent ECAN bus errors. For sleep-mode designs, switch the ADC off and gate unused peripherals to achieve the lowest quiescent current.
Always configure MCLR as a reset input (default) on the PIC18LF4580-I/P rather than as RE3 digital input, unless the application explicitly requires RE3 functionality - configuration is via the CONFIG3H register's MCLRE bit. The ICSP pins RB6/PGC and RB7/PGD are shared with PORTB and must not be loaded with low-impedance peripherals during in-circuit programming, otherwise programmer handshake failures occur. Place a 10 kΩ pull-up on MCLR per Microchip's reference design to ensure clean reset behavior across temperature.
The integrated ECAN module requires a dedicated external transceiver (MCP2551, TJA1050, or similar) and a properly terminated bus (120 Ω at each end). Route the CANTX (RB2) and CANRX (RB3) traces as a short differential pair to the transceiver, keeping them away from switching power and PWM traces to avoid coupling. Place a 100 nF decoupling capacitor on the transceiver VCC and add TVS protection on the bus lines for industrial EMC compliance. Failure to terminate correctly causes intermittent CAN bus errors and high retransmit counts.
When using the 40-pin PDIP package, allocate a 2.54 mm-pitch through-hole footprint with at least 0.5 mm annular ring and keep out the top-side copper pour under the IC body. Place the decoupling capacitors on the bottom side directly beneath the VDD/VSS pins for shortest loop area. For prototypes, reserve a 2x3 100-mil header footprint on the ICSP pins (RB6/RB7/MCLR/VDD/VSS) so a PICkit programmer can clip on without rework. Production designs targeting the same die should migrate to the TQFP-44 (PT suffix) variant to save board area.
Информация о соответствии
RoHS-compliant and lead-free per Microchip product page (P suffix denotes lead-free PDIP). Industrial temperature grade -40 °C to +85 °C. Not AEC-Q100 qualified - use PIC18F4580-I/PT automotive-grade variant for AEC-Q100 designs. Halogen-free status not explicitly stated in distributor listings.
