PIC24EP32GP204-I/TL - 16-bit MCU 32KB Flash 44-VFTLA | Microchip
Артикул: PIC24EP32GP204-I/TL ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $3.75 | $3,75 |
| 10 | $3.4 | $34,00 |
| 100 | $2.85 | $285,00 |
| 500 | $2.45 | $1.225,00 |
| 1.000 | $2.15 | $2.150,00 |
| 3.000 | $1.85 | $5.550,00 |
PIC24EP32GP204-I/TL Обзор
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), data memory (SRAM), and a configurable set of digital and analog peripherals. Within the broader taxonomy, a 16-bit MCU sits between 8-bit controllers (lower computational headroom, simpler peripherals) and 32-bit MCUs (higher performance, larger address space). The PIC24EP family targets the high-end general-purpose tier, offering DSP-class instruction throughput, hardware op-amps, and the Peripheral Trigger Generator (PTG) for hardware-state-machine-driven peripherals, while remaining compatible with the classic PIC16/24 instruction set for code portability.
Key features include a CPU speed of up to 70 MIPS at 70 MHz, hardware Multiply and Divide in a single cycle, Peripheral Pin Select (PPS) for flexible signal routing, an integrated Charge Time Measurement Unit (CTMU) for capacitive touch and time-of-flight sensing, on-chip op-amps and comparators for analog signal conditioning, and an advanced 8-channel PWM with dead-band control. Communication peripherals include I2C, SPI, UART, and Enhanced Parallel Slave Port (EPSP).
Architecturally, the PIC24EP32GP204-I/TL uses a modified Harvard architecture with separate 24-bit instruction and 16-bit data paths, single-cycle hardware multiplier, and a 16-element register file. The CTMU, paired with the ADC, allows precision time measurement with sub-nanosecond resolution, enabling capacitive touch sensing, accurate temperature conversion, and ultrasonic time-of-flight measurements without external timing ASICs.
Typical applications include industrial control and automation, digital signal processing at the edge, LED lighting controllers, motor control with PFC, medical monitoring instrumentation, and consumer appliance UI panels with capacitive touch. The combination of 70 MIPS, hardware op-amps, and CTMU makes the device especially suited to power-conversion control loops and DSP-style sensor processing.
When designing with this device, ensure the VFTLA exposed pad is soldered to a sufficiently large thermal/ground pour; failure to do so can cause thermal runaway under high I/O toggle loads. Decouple VDDCORE with a 10 µF bulk + 0.1 µF ceramic pair within 5 mm of the exposed pad, and keep analog reference traces isolated from switching digital lines.
This page synthesizes distributor pricing, drop-in alternatives across Microchip PIC24EP/dsPIC variants, and practical design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для PIC24EP32GP204-I/TL — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC24EP32GP204-I/TL (тот же форм-фактор и посадочное место) — отличается по ADC, Package, Core Architecture, Program Memory (Flash), Data RAM.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC24EP32GP203T-I/TL
✅ Прямая замена✓ В наличии
$2.55 / шт.
Открыть даташит →PIC24EP32GP204-I/TL Максимальные параметры и электрические характеристики
| Core Architecture | PIC24E 16-bit CPU (modified Harvard, 24-bit instructions) |
| CPU Performance | 70 MIPS at 70 MHz |
| Program Memory (Flash) | 32 KB (10.7K × 24) |
| Data Memory (SRAM) | 4 KB |
| Operating Voltage | 3.0 V to 3.6 V (3.3 V typical) |
| ADC | 10-bit, multiple channels |
| Диапазон рабочих температур | -40 °C to +85 °C (industrial, 'I' suffix) |
| Корпус | 44-pin VTLA (VFTLA) Exposed Pad |
| Тип монтажа | Surface Mount |
| On-chip Op-Amps | Yes |
| Comparators | Yes |
| Charge Time Measurement Unit (CTMU) | Yes |
| Peripheral Trigger Generator (PTG) | Yes |
| Communication Interfaces | I2C, SPI, UART, Enhanced Parallel Slave Port |
| PWM Channels | 8 channels with dead-band control |
| Peripheral Pin Select (PPS) | Yes |
| Hardware Multiply/Divide | Yes (single cycle) |
| Статус RoHS | Compliant |
Руководство по цоколевке PIC24EP32GP204-I/TL в корпусе 44-pin vtla (vftla) exposed pad
Цоколевка для PIC24EP32GP204-I/TL (корпус 44-pin vtla (vftla) exposed pad). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для PIC24EP32GP204-I/TL.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
PIC24EP32GP204-I/TL подходит для 6 применениеs: Industrial Sensor Signal Conditioning, Capacitive Touch User Interface, Digital LED Lighting Controllers, Closed-Loop Stepper/Servo Control, Portable Medical Monitoring Devices, Consumer Appliance UI Panels.
Industrial Sensor Signal Conditioning
The PIC24EP32GP204-I/TL's integrated on-chip operational amplifiers allow direct conditioning of low-amplitude sensor signals (thermocouples, strain gauges, RTDs) without external op-amp stages. With the CTMU providing sub-microsecond timing resolution, the device can implement ratiometric capacitance measurements for pressure and humidity sensors, while the 70 MIPS core handles digital filtering and linearization. This integration reduces PCB area and BOM cost in industrial sensor transmitters.
Рекомендуется
Capacitive Touch User Interface
On-chip CTMU combined with the ADC and hardware op-amps enables scan-free capacitive touch sensing across 8-12 touch channels simultaneously. The Peripheral Trigger Generator (PTG) automates scanning and post-processing, offloading the 70 MIPS core to handle higher-level UI logic. With 32 KB Flash and 4 KB SRAM, the device comfortably drives a 4-inch TFT-based touch UI panel with or without RTOS.
Рекомендуется
Digital LED Lighting Controllers
Eight hardware PWM channels with dead-band control and 70 MIPS headroom make the PIC24EP32GP204-I/TL ideal for multi-channel LED drivers, including white-balance mixing and DMX512-style feedback control. The integrated op-amps can sense string current for closed-loop constant-current regulation, while PPS routes any PWM channel to any I/O pin for flexible PCB routing.
Рекомендуется
Closed-Loop Stepper/Servo Control
The 70 MIPS core implements PID control loops with sub-microsecond update rates for stepper and small DC servo drives. PPS remaps encoder inputs to any I/O, and the integrated comparators handle end-of-travel and overcurrent detection. With 32 KB Flash, the device fits quadrature decoding, trapezoidal acceleration profiles, and a USB-CDC host interface without external logic.
Рекомендуется
Portable Medical Monitoring Devices
The PIC24EP32GP204-I/TL's low active power (~30 mA/MIPS) and integrated op-amps enable wearable patient monitors (pulse oximetry, ECG front-end) with multi-hour battery life. The CTMU drives time-of-flight ultrasonic sensing for heart-rate or blood-pressure cuffs, while hardware comparators flag lead-off or sensor-disconnect events within a single sample period.
Рекомендуется
Consumer Appliance UI Panels
Appliance front-panel controllers integrate capacitive touch, LED status indication, and small TFT displays - a perfect fit for the PIC24EP32GP204-I/TL. The 44-VFTLA footprint keeps the MCU footprint compact while exposing enough I/O for a 4×3 keypad matrix, an SPI display, and I2C audio feedback IC. PIC24EP code density simplifies implementation of multilingual UI flows within 32 KB.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC24EP32GP204-I/TL — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC24EP32GP204-I/PT | PIC24EP32GP204-I/MV | PIC24EP32GP203T-I/TL | PIC24EP32MC204-I/PT |
|---|---|---|---|---|---|
| Package | 44-pin VTLA (VFTLA) Exposed Pad | 44-pin TQFP | 44-pin UQFN | 44-pin VTLA (same) | 44-pin TQFP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 32 KB | 32 KB (same) | 32 KB (same) | 16 KB (-50%) | 32 KB (same) |
| RAM | 4 KB | 4 KB (same) | 4 KB (same) | 2 KB (-50%) | 4 KB (same) |
| Core Performance | 70 MIPS at 70 MHz | 70 MIPS (same) | 70 MIPS (same) | 70 MIPS (same) | 70 MIPS (same) |
| Operating Voltage | 3.0 V - 3.6 V | 3.0 V - 3.6 V | 3.0 V - 3.6 V | 3.0 V - 3.6 V | 3.0 V - 3.6 V |
| On-chip Op-Amps | Yes | Yes | Yes | Yes | Yes |
| Motor-Control Peripherals | Standard (PWM only) | Standard (PWM only) | Standard (PWM only) | Standard (PWM only) | Enhanced (QEI + High-Resolution PWM) |
| Temperature Range | -40 °C to +85 °C (industrial) | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
Ключевые отличия
- Integrated analog peripherals (против Generic Cortex-M0 MCU alternatives)
- Peripheral Trigger Generator (PTG) (против PIC24FJ-series predecessors)
- Code density advantage (против ARM Cortex-M0+ MCUs in same Flash tier)
Заметки по проектированию
The 44-pin VFTLA exposed pad is the primary thermal path; failure to solder to a sufficiently large copper pour (recommended ≥ 1 cm² connected to GND) can cause junction-temperature rise under sustained 70 MIPS loops. Estimated: at 70 MIPS active current ~30 mA/MIPS, total power ≈ 2 W; without thermal relief the VFTLA junction-to-ambient resistance exceeds safe margins.
Place a 10 µF bulk + 0.1 µF ceramic decoupling pair within 5 mm of the exposed pad and another pair adjacent to each AVDD/AVSS pair. Keep analog reference traces (VREF+, VREF-) isolated from switching digital lines by at least 3× trace width; route high-speed digital signals on inner layers to minimize EMI coupling into the ADC inputs.
When migrating firmware between PIC24EP variants, verify the Peripheral Pin Select (PPS) register mappings - I/O assignments differ between package options (TL vs PT vs MV) even on the same die. Failing to remap PPS causes 'dead' peripherals despite correct initialization. Also note: the CTMU requires the on-chip voltage reference to be enabled before current-source outputs stabilize.
Информация о соответствии
RoHS and REACH compliance per Microchip product page; 'I' suffix indicates industrial temperature grade (-40 °C to +85 °C). Not AEC-Q100 qualified - for automotive applications, refer to PIC24EP32GP204-E/TL or higher-grade dsPIC variants.
