PIC24EP32MC204-E/MV - 60 MIPS 32KB MCU | Microchip Technology
Артикул: PIC24EP32MC204-E/MV ✓ АктивенPIC24EP32MC204-E/MV Обзор
A PIC24E motor-control MCU is a microcontroller architecture optimized for real-time digital motor control. It combines a 16-bit CPU, programmable peripherals, fast ADC and PWM resources, and control-focused analog peripherals within a single device. This places the PIC24E family above general-purpose microcontrollers in the hierarchy of embedded semiconductor solutions for motors, power conversion, and industrial automation.
Key device features include a 16-bit instruction architecture, 60 MIPS execution capability, 32 KB of program Flash, 4 KB of SRAM, 35 I/O pins, and operation from 3 V to 3.6 V. The integrated MCPWM provides dedicated motor-control outputs, while the internal operational amplifiers and comparators reduce the component count required for current sensing, speed control, and protection. The device is also identified as AEC-Q100 qualified for automotive applications.
The 48-UQFN package provides a compact 6 x 6 mm footprint for space-constrained motor controllers, industrial drives, and automotive modules. Its peripheral mix supports closed-loop current and position regulation, sensor conditioning, fault detection, and deterministic PWM generation. At the same time, the small package places greater emphasis on careful exposed-pad thermal management and clean PCB layout around sensitive analog and switching signals.
Typical uses include BLDC and PMSM motor drives, automotive pump and actuator controllers, power-conversion systems, compact industrial automation equipment, and energy-efficient fan or pump control. The 3 V to 3.6 V operating range suits modern 3.3 V embedded systems, while the integrated analog functions are particularly useful when current-sense amplifiers or comparators would otherwise require separate devices.
Designers should preserve the manufacturer's recommended decoupling and exposed-pad land pattern, route high-current motor outputs away from the analog inputs, and validate the regulator and protection network for automotive transient requirements. Confirm pin multiplexing, timing, and analog limits in the manufacturer datasheet before committing the board layout.
Аналоги без доработки для PIC24EP32MC204-E/MV — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
PIC24EP32MC202-E/MV
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
PIC24EP32MC203-E/MV
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
PIC24EP16MC203-E/MV
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
PIC24EP16MC202-E/MV
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
PIC24EP32MC205-E/MV
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
PIC24EP32MC204-E/MV Максимальные параметры и электрические характеристики
| Architecture | 16-bit PIC24E |
| Maximum Performance | 60 MIPS |
| Program Flash Memory | 32 KB |
| Program Memory Organization | 10.7K x 24 words |
| SRAM | 4 KB |
| RAM Organization | 2K x 16 words |
| I/O Pin Count | 35 pins |
| Operating Voltage | 3 V to 3.6 V |
| Motor-Control PWM | MCPWM module |
| Internal Operational Amplifiers | Integrated |
| Internal Comparators | Integrated |
| Peripheral Timer | PTG peripheral |
| Корпус | 48-UQFN (6 x 6 mm) |
| Automotive Qualification | AEC-Q100 qualified |
| Product Series | PIC Automotive / PIC24EP |
Руководство по цоколевке PIC24EP32MC204-E/MV в корпусе 48-uqfn (6 x 6 mm)
Цоколевка для PIC24EP32MC204-E/MV (корпус 48-uqfn (6 x 6 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для PIC24EP32MC204-E/MV.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
PIC24EP32MC204-E/MV подходит для 6 применениеs: Automotive BLDC Motor Control, PMSM Field-Oriented Control, Industrial Pump and Fan Drive, Automotive Actuator and Pump Module, Power Conversion and Inverter Control, Compact Sensor and Feedback Control.
Automotive BLDC Motor Control
The PIC24EP32MC204-E/MV fits automotive brushless DC motor controllers because its 60 MIPS 16-bit core can execute speed, torque, and fault-control algorithms while the integrated MCPWM generates deterministic gate-drive timing. The internal operational amplifiers and comparators can support current-sense amplification and protection, reducing discrete analog circuitry. Its 48-UQFN 6 x 6 mm package also preserves board area in compact electronic modules. The 3 V to 3.6 V operating range suits a 3.3 V automotive power architecture, while AEC-Q100 qualification supports automotive qualification programs. Final design validation must include transient immunity, thermal performance, and the vehicle platform’s safety requirements.
Рекомендуется
PMSM Field-Oriented Control
The PIC24EP32MC204-E/MV is suitable for permanent-magnet synchronous motor field-oriented control because the 60 MIPS core provides computational margin for current sampling, transforms, speed estimation, and control-loop execution. Its 35 I/O pins support encoder, resolver-interface, Hall-effect, and PWM-related connections, while 32 KB of Flash supports a compact embedded control application. The integrated MCPWM, comparators, and operational amplifiers reduce the number of external signal-conditioning components. In a compact drive, the 48-UQFN footprint improves routing flexibility, although exposed-pad layout and separation between power-stage switching nodes and analog inputs remain essential.
Рекомендуется
Industrial Pump and Fan Drive
The PIC24EP32MC204-E/MV can control compact industrial pumps and fans where deterministic PWM, closed-loop current regulation, and fault handling are required. Its 60 MIPS execution rate supports speed-control logic and peripheral coordination, while the integrated MCPWM simplifies complementary drive generation. The 3 V to 3.6 V supply range aligns with common 3.3 V industrial control rails, and 32 KB of Flash provides room for application logic. Internal comparators and operational amplifiers can assist with zero-cross, current, or fault detection. Designers should size decoupling for the switching environment and keep motor-current paths isolated from sensitive analog and MCU ground returns.
Рекомендуется
Automotive Actuator and Pump Module
The PIC24EP32MC204-E/MV suits compact actuator, valve, and pump modules where local regulation, diagnostics, and motor or solenoid control must coexist in a small footprint. Its AEC-Q100 qualification status is relevant for automotive environments, while 35 I/O pins provide connections for position feedback, pressure sensing, diagnostic inputs, and power-stage control. The integrated analog resources can reduce the component count around sensing and protection functions. With 32 KB of Flash and 4 KB of RAM, the device is suited to focused embedded control rather than large gateway applications. Board-level validation should address automotive transients, ground bounce, thermal rise, and exposed-pad heat spreading.
Рекомендуется
Power Conversion and Inverter Control
The PIC24EP32MC204-E/MV can serve as the digital controller in a compact power-conversion or inverter subsystem because the MCPWM, 60 MIPS core, and 32 KB of Flash support coordinated switching, fault handling, and supervisory algorithms. The operational amplifiers and comparators can assist with current or voltage-loop conditioning. A 3.3 V supply domain fits many dual-voltage power architectures where the MCU controls a separate high-voltage gate driver. The 48-UQFN 6 x 6 mm package helps reduce controller-board area, but it also requires careful exposed-pad thermal design. High-dv/dt switching nodes must remain separated from analog inputs, and component tolerances should be checked against control-loop requirements.
Рекомендуется
Compact Sensor and Feedback Control
The PIC24EP32MC204-E/MV is useful in feedback-control systems that combine sensing, signal comparison, and actuator drive. Its integrated operational amplifiers and comparators can process analog sensor signals close to the control logic, while the 35 available I/O pins support encoders, Hall sensors, analog channels, and digital status signals. The 16-bit core and 60 MIPS performance allow filtering and proportional-integral-derivative control to coexist with communication and safety checks. The 48-UQFN package supports dense instrumentation, although analog routing must remain short and shielded from PWM and motor-switching nodes. Firmware and analog operating limits should be validated against the sensor bandwidth and required control-loop accuracy.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC24EP32MC204-E/MV — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC24EP32MC202-E/MV | PIC24EP32MC203-E/MV | PIC24EP16MC203-E/MV | PIC24EP16MC202-E/MV | PIC24EP32MC205-E/MV |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-UQFN (6 x 6 mm) | 48-UQFN (6 x 6 mm) | 48-UQFN (6 x 6 mm) | 48-UQFN (6 x 6 mm) | 48-UQFN (6 x 6 mm) | 48-UQFN (6 x 6 mm) |
| CPU Architecture | 16-bit PIC24E | 16-bit PIC24E | 16-bit PIC24E | 16-bit PIC24E | 16-bit PIC24E | 16-bit PIC24E |
| Maximum Performance | 60 MIPS | 60 MIPS | 60 MIPS | 60 MIPS | 60 MIPS | 60 MIPS |
| Operating Voltage | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V |
| I/O Pin Count | 35 pins | 35 pins | 35 pins | 35 pins | 35 pins | 35 pins |
| Motor-Control Peripherals | MCPWM, operational amplifiers, comparators, and PTG | MCPWM, operational amplifiers, comparators, and PTG | MCPWM, operational amplifiers, comparators, and PTG | MCPWM, operational amplifiers, comparators, and PTG | MCPWM, operational amplifiers, comparators, and PTG | MCPWM, operational amplifiers, comparators, and PTG |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100 family option | AEC-Q100 family option | AEC-Q100 family option | AEC-Q100 family option | AEC-Q100 family option |
Ключевые отличия
- Higher program-memory capacity than lower-memory same-package alternatives (против PIC24EP32MC203-E/MV)
- Substantially more Flash than the smallest family alternative (против PIC24EP32MC202-E/MV)
- Compact 6 x 6 mm motor-control integration (против PIC24EP32MC204-E/ML)
- Automotive-oriented MCU with integrated analog motor-control resources (против PIC24EP32MC204-I/PT)
Заметки по проектированию
The 48-UQFN package has a compact exposed thermal pad that must be connected to the appropriate ground plane according to the manufacturer package drawing. Place short thermal-via arrays beneath the exposed pad and use uninterrupted copper on the board to spread heat. Keep the thermal return path independent of high-current motor-return paths where practical. Validate junction-temperature margin across the maximum ambient temperature, motor-drive duty cycle, and supply-voltage range rather than relying on average power alone.
Place all decoupling capacitors directly between the appropriate supply and ground pins, with the shortest possible loop and no intervening vias where feasible. Route MCPWM outputs and motor-switching nodes away from MCPWM feedback, operational-amplifier inputs, comparator signals, and the MCU ground reference. The 48-UQFN footprint provides limited lead escape space, so complete pin multiplexing and escape planning before routing. Use the manufacturer land pattern and exposed-pad dimensions as the authority for copper and solder-mask geometry.
Do not treat the -E/MV, -E/ML, and -I/PT ordering variants as interchangeable. The target uses a 48-UQFN 6 x 6 mm package, while the other options use 44-QFN or 44-TQFP packages with different pin counts and land patterns. Likewise, a same-family MCU with 8 KB or 16 KB Flash cannot simply replace the 32 KB target if the existing firmware exceeds its memory capacity. Check package dimensions, exposed-pad connections, pin multiplexing, peripheral availability, and firmware size together.
Current-sense signals should be referenced to a quiet analog ground region and kept short, away from gate-drive and motor-node transitions. Use the internal operational amplifiers only when their input, output, common-mode, and stability restrictions meet the sensing design; otherwise use a dedicated external front end. Comparator thresholds and filtering should tolerate switching transients. If the control system uses a high-current two-wire motor, separate the motor-return path from the sensitive analog ground and verify ground offsets during maximum load transients.
Информация о соответствии
The PIC24EP32MC204-E/MV is identified as AEC-Q100 qualified and automotive grade. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not established by the available manufacturer and distributor information.