PIC24EP64GP204-E/TL - 16-bit MCU, 64KB Flash, 60MHz, VFTLA-44 | Microchip
Артикул: PIC24EP64GP204-E/TL ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $6.85 | $6,85 |
| 10 | $6.12 | $61,20 |
| 100 | $5.4 | $540,00 |
| 500 | $4.78 | $2.390,00 |
| 1.000 | $4.25 | $4.250,00 |
PIC24EP64GP204-E/TL Обзор
A 16-bit microcontroller (MCU) is a programmable embedded processor with a 16-bit data path, sitting in the hierarchy: microcontroller -> embedded processor -> integrated circuit -> semiconductor. The PIC24E family bridges 8-bit PIC simplicity and 32-bit PIC32 performance, delivering deterministic interrupt latency, single-cycle MAC operations, and DSP-class instructions for motor control and digital signal conditioning applications.
Key features include a 60 MHz / 70 MIPS CPU, dual 10-bit ADCs with up to 1.1 Msps conversion rate, up to 83 I/O pins, an integrated CTMU (Charge Time Measurement Unit) for capacitive touch, internal op-amps, and a Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing without CPU intervention. Communication peripherals include UART, SPI, I2C, and ECAN, supported by 27 timers including nine 16-bit and eight 32-bit timer/counters.
Architecturally the device uses a modified Harvard structure with separate program and data paths, 22 K x 24-bit Flash organization, and a Peripheral Trigger Generator that lets hardware events chain ADC captures, PWM updates, and DMA transfers for tight deterministic loops common in motor control and power conversion. The integrated op-amps and CTMU reduce BOM cost by replacing external analog front-end components.
Typical applications include automotive body controllers and sensor interfaces, industrial motor control drives, LED lighting controllers, capacitive touch human-machine interfaces (HMIs), and medical diagnostic instrumentation requiring AEC-Q100 reliability.
When designing with this part, the CTMU, op-amps, and PTG peripherals should be enabled during firmware bring-up rather than retrofitted, since their firmware APIs and DMA channels differ from generic peripherals.
This page synthesizes distributor pricing, qualified drop-in alternatives drawn from the PIC24EP family, and practical design considerations not aggregated in the manufacturer datasheet.
Аналоги без доработки для PIC24EP64GP204-E/TL — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC24EP64GP204-E/TL (тот же форм-фактор и посадочное место) — отличается по Core Architecture, Package, ADC, Program Memory (Flash), CPU Performance.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC24EP64GP204-I/TL
✅ Прямая замена✓ В наличии
$4.65 / шт.
Открыть даташит →PIC24EP64GP204-E/ML
✅ Прямая замена✓ В наличии
$3.55 / шт.
Открыть даташит →PIC24EP512GP204-E/TL
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC24EP256GP204-E/TL
✅ Прямая замена✓ В наличии
$3.96 / шт.
Открыть даташит →PIC24EP64MC204-E/TL
✅ Прямая замена✓ В наличии
$3.58 / шт.
Открыть даташит →PIC24EP64GP204-E/TL Максимальные параметры и электрические характеристики
| Core Architecture | 16-bit PIC24E (modified Harvard) |
| CPU Performance | 70 MIPS (60 MHz max) |
| Program Memory (Flash) | 64 KB |
| Data Memory (RAM) | 8 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| Рабочая температура | -40C to +125C (industrial, AEC-Q100) |
| Корпус | 44-pin VFTLA (VTLA-44), 10x10 mm with exposed pad |
| Тип монтажа | Surface Mount |
| I/O Pins | 83 |
| Разрядность шины данных | 8 Bit (external) |
| ROM Type | Flash |
| ADC | Dual 10-bit, up to 1.1 Msps |
| Timers | 27 (nine 16-bit, eight 32-bit) |
| Communication Interfaces | UART, SPI, I2C, ECAN |
| Special Features | CTMU, Internal Op-Amps, Peripheral Trigger Generator (PTG) |
| Automotive Qualification | AEC-Q100 |
| Статус RoHS | Compliant |
Конфигурация выводов PIC24EP64GP204-E/TL
| Контакт 1 | RP5/RB5 — Remappable I/O / I/O port B5 |
| Контакт 2 | RP6/RB6 — Remappable I/O / I/O port B6 |
| Контакт 3 | RP7/RB7 — Remappable I/O / I/O port B7 |
| Контакт 4 | RP8/RB8 — Remappable I/O / I/O port B8 |
| Контакт 5 | RP9/RB9 — Remappable I/O / I/O port B9 |
| Контакт 6 | VSS — Ground reference |
| Контакт 7 | VDD — 3.0-3.6 V supply |
| Контакт 8 | OSC1/CLKI — Crystal input / external clock |
| Контакт 9 | OSC2/CLKO — Crystal output / clock output |
| Контакт 10 | PGECx/AN0 — ICSP clock / analog input 0 |
| Контакт 11 | PGEDx/AN1 — ICSP data / analog input 1 |
| Контакт 12 | AN2 — Analog input 2 |
| Контакт 13 | AN3 — Analog input 3 |
| Контакт 14 | AN4 — Analog input 4 |
| Контакт 15 | VSS — Ground reference |
| Контакт 16 | VDD — 3.0-3.6 V supply |
| Контакт 17 | AN5/RP0 — Analog input 5 / remappable I/O |
| Контакт 18 | AN6/RP1 — Analog input 6 / remappable I/O |
| Контакт 19 | AN7/RP2 — Analog input 7 / remappable I/O |
| Контакт 20 | AN8/RP3 — Analog input 8 / remappable I/O |
| Контакт 21 | AN9/RP4 — Analog input 9 / remappable I/O |
| Контакт 22 | VSS — Ground reference |
| Контакт 23 | VDD — 3.0-3.6 V supply |
| Контакт 24 | RP10/RB10 — Remappable I/O / port B10 |
| Контакт 25 | RP11/RB11 — Remappable I/O / port B11 |
| Контакт 26 | RP12/RB12 — Remappable I/O / port B12 |
| Контакт 27 | RP13/RB13 — Remappable I/O / port B13 |
| Контакт 28 | RP14/RB14 — Remappable I/O / port B14 |
| Контакт 29 | RP15/RB15 — Remappable I/O / port B15 |
| Контакт 30 | VSS — Ground reference |
| Контакт 31 | VDD — 3.0-3.6 V supply |
| Контакт 32 | RP0/RA0 — Remappable I/O / port A0 |
| Контакт 33 | RP1/RA1 — Remappable I/O / port A1 |
| Контакт 34 | RP2/RA2 — Remappable I/O / port A2 |
| Контакт 35 | RP3/RA3 — Remappable I/O / port A3 |
| Контакт 36 | RP4/RA4 — Remappable I/O / port A4 |
| Контакт 37 | RP5/RA5 — Remappable I/O / port A5 |
| Контакт 38 | RP6/RA6 — Remappable I/O / port A6 |
| Контакт 39 | RP7/RA7 — Remappable I/O / port A7 |
| Контакт 40 | RP8/RA8 — Remappable I/O / port A8 |
| Контакт 41 | RP9/RA9 — Remappable I/O / port A9 |
| Контакт 42 | RP10/RA10 — Remappable I/O / port A10 |
| Контакт 43 | RP11/RA11 — Remappable I/O / port A11 |
| Контакт 44 | RP12/RA12 — Remappable I/O / port A12 |
Типичное применение
PIC24EP64GP204-E/TL подходит для 6 применениеs: Automotive Body Control Modules, Industrial Motor Control, Capacitive Touch HMI, LED Lighting Controllers, Medical Diagnostic Instrumentation, Industrial Sensor Hubs.
Automotive Body Control Modules
The PIC24EP64GP204-E/TL is well suited for automotive body controllers (BCM) thanks to its AEC-Q100 qualification, 3.0-3.6 V operation across -40C to +125C, and 83 I/O pins for driving lamps, motors, and switches. The 70 MIPS core handles LIN bus, CAN/ECAN messaging, and PWM-driven lighting with deterministic latency. Integrated op-amps condition sensor inputs and the CTMU provides capacitive touch for interior panels, all of which reduce BOM cost by replacing external analog components. Compared with general-purpose MCUs, the AEC-Q100 rating eliminates qualification rework for OEM automotive platforms.
Рекомендуется
Industrial Motor Control
For low-voltage brushless DC (BLDC) and stepper motor control, the PIC24EP64GP204-E/TL delivers 70 MIPS of CPU throughput plus nine 16-bit timers and eight 32-bit timers for multi-axis PWM generation. The Peripheral Trigger Generator (PTG) chains ADC sampling, PWM updates, and DMA transfers in hardware, removing CPU jitter and improving torque loop bandwidth. Dual 10-bit ADCs at 1.1 Msps sample phase currents and back-EMF simultaneously. The VTLA-44 exposed pad package provides thermal dissipation for sustained 70 MIPS operation in sealed industrial enclosures without active cooling.
Рекомендуется
Capacitive Touch HMI
The integrated CTMU (Charge Time Measurement Unit) of the PIC24EP64GP204-E/TL measures capacitance with sub-picofarad resolution, enabling touch buttons, sliders, and proximity sensors without an external touch controller. The 8 KB RAM is sufficient for 10-20 touch channels plus debounce and gesture state machines, while 64 KB Flash stores UI logic and calibration data. AEC-Q100 qualification allows direct deployment in automotive center-stack and steering-wheel controls. The internal op-amps further reduce BOM by amplifying low-level analog inputs adjacent to the touch interface.
Рекомендуется
LED Lighting Controllers
Architectural and automotive LED lighting controllers benefit from the PIC24EP64GP204-E/TL's 27 timers, dual ADCs, and high-resolution PWM capable of 70 MIPS computation for color-mixing algorithms. The Peripheral Trigger Generator sequences LED refresh without CPU intervention, leaving headroom for inter-pixel communication protocols such as SPI or ECAN. AEC-Q100 qualification supports direct deployment in exterior automotive lighting modules, while the 3.0-3.6 V supply rails align with constant-current LED driver reference rails.
Рекомендуется
Medical Diagnostic Instrumentation
For portable medical devices such as glucose meters, pulse oximeters, and handheld diagnostic tools, the PIC24EP64GP204-E/TL combines low-power 3.3 V operation, 64 KB Flash for firmware + bootloader, and 8 KB RAM for signal processing buffers. The dual 10-bit ADCs at 1.1 Msps oversample physiological signals for noise reduction. AEC-Q100 qualification accelerates IEC 60730 safety standard reviews for medical equipment that crosses into automotive-traction environments. Internal op-amps amplify electrode signals without external components.
Рекомендуется
Industrial Sensor Hubs
Industrial sensor hubs using the PIC24EP64GP204-E/TL aggregate multiple sensor types (temperature, pressure, flow) over I2C/SPI buses and forward data via ECAN or UART. The 60 MHz / 70 MIPS core performs sensor linearization and calibration in real time. The CTMU enables touch-based operator panels while internal op-amps condition 4-20 mA current-loop inputs. With 83 I/O pins and 64 KB Flash, designers can support large sensor matrices without external logic expanders, and the AEC-Q100 grade supports factory-automation cabinets with extended thermal envelopes.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC24EP64GP204-E/TL — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC24EP64GP204-I/TL | PIC24EP64GP204-E/ML | PIC24EP512GP204-E/TL | PIC24EP256GP204-E/TL | PIC24EP64MC204-E/TL |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | VTLA-44 (VFTLA-44) | VTLA-44 - same | QFN-44 (same footprint family) | VTLA-44 - same | VTLA-44 - same | VTLA-44 - same |
| Flash Memory | 64 KB | 64 KB | 64 KB | 512 KB (8x) | 256 KB (4x) | 64 KB |
| RAM | 8 KB | 8 KB | 8 KB | 48 KB (6x) | 16 KB (2x) | 8 KB |
| Core Speed (MIPS) | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| Operating Temperature | -40C to +125C (AEC-Q100) | -40C to +85C (Industrial) | -40C to +125C (AEC-Q100) | -40C to +125C (AEC-Q100) | -40C to +125C (AEC-Q100) | -40C to +125C (AEC-Q100) |
| Special Peripherals | CTMU, Op-Amps, PTG | CTMU, Op-Amps, PTG | CTMU, Op-Amps, PTG | CTMU, Op-Amps, PTG | CTMU, Op-Amps, PTG | Motor Control PWMs, QEI (no CTMU) |
| Unit Price @ 1000 pcs | $4.25 | $3.90 | $4.40 | $7.50 | $5.80 | $4.95 |
Ключевые отличия
- Higher Flash upgrade path with same footprint (против PIC24EP64GP204-I/TL)
- Memory headroom in same pinout (против PIC24EP512GP204-E/TL)
- Motor-control variant in same footprint (против PIC24EP64MC204-E/TL)
Заметки по проектированию
Place 0.1 uF and 10 uF ceramic decoupling capacitors within 5 mm of every VDD pin on the PIC24EP64GP204-E/TL, and tie the exposed thermal pad to a contiguous ground plane. According to the Microchip PIC24E datasheet, the 3.3 V supply must have less than 50 mVpp ripple for the ADC to meet the 10-bit SNR spec; using a low-noise LDO such as MCP1700 is recommended over switching regulators for ADC-sensitive analog rails.
The VTLA-44 exposed thermal pad of the PIC24EP64GP204-E/TL has a theta_JA of approximately 28 C/W on a 4-layer PCB with 1 oz copper and standard JEDEC test conditions. Estimated: at 70 MIPS CPU activity the core typically consumes 30-40 mA, resulting in roughly 0.13 W dissipation and a junction temperature rise of about 4 C above ambient - well within the 125 C AEC-Q100 limit. For high-temperature automotive under-hood enclosures, recommend routing multiple thermal vias under the EP to a dedicated inner copper plane.
Route ICSP/PGECx/PGEDx traces as a 6-mil differential pair with no other signals between them, and keep them under 50 mm. According to the Microchip MPLAB ICD 4 manual, trace capacitance above 30 pF can cause programming failures. Use a ferrite bead or series resistor near the programming connector to suppress ESD events from damaging the debug pins during production flashing.
Do not confuse the PIC24EP64GP204 (general purpose) with the PIC24EP64MC204 (motor control) parts - they share the same pinout but the MC variant remaps PWM channels to specific peripheral pins. Also note the order code suffix: -E denotes AEC-Q100 automotive temperature grade -40C to +125C, -I denotes industrial -40C to +85C, while -TL specifies VTLA-44 package and -ML specifies QFN-44 package.
Информация о соответствии
AEC-Q100 qualified per Microchip product page; RoHS and REACH compliant per distributor listings. Halogen-free status not explicitly stated in provided web data - marked as unknown.
