PIC24FJ192GB110T-I/PF - 16-bit 32MHz USB OTG MCU, 192KB Flash | Microchip
Артикул: PIC24FJ192GB110T-I/PF ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $8.32 | $8,32 |
| 10 | $7.55 | $75,50 |
| 100 | $6.78 | $678,00 |
| 500 | $6.1 | $3.050,00 |
| 1.000 | $5.5 | $5.500,00 |
PIC24FJ192GB110T-I/PF Обзор
A PIC24F microcontroller is a 16-bit flash MCU family from Microchip that sits between the 8-bit PIC16/PIC18 families and the 16-bit dsPIC/PIC32 families. It is built on a Modified Harvard architecture with separate program and data buses, enabling single-cycle instruction fetch with data access, while sharing a unified 16-bit instruction set across the family. PIC24F parts are positioned for low-power (<100 nA standby current) embedded designs that need richer peripherals than an 8-bit MCU can deliver but do not require a digital signal processor. Within Microchip's portfolio, PIC24FJ192GB110 belongs to the PIC24F USB family, which adds an integrated USB 2.0 full-speed On-The-Go transceiver to the standard PIC24F feature set.
Key features include USB OTG with integrated transceiver, 16 MIPS performance at 32 MHz, low-power nanoWatt XLP technology for <100 nA standby current, and 84 remappable I/O pins via the Peripheral Pin Select (PPS) subsystem. The 16 KB RAM and 192 KB Flash support buffering and large protocol stacks, while 3x I2C, 3x SPI, 4x UART, and 23 timers allow parallel connectivity and control tasks without external peripherals. Real-time clock, comparators, 10-bit ADC (16 channels at 500 ksps), and 16-bit timers reduce external analog and timing component counts.
Architecture depth: the device uses a 16-bit data path with separate 24-bit program and 16-bit data buses for the Modified Harvard core, and the C compiler (MPLAB XC16) maps efficiently onto the 16-element working register array. Hardware DSP-like acceleration is provided by a 17-bit x 17-bit single-cycle multiplier and a 16/32-bit hardware divider. The PPS module allows most digital peripherals to be mapped to a wide range of I/O pins at runtime, simplifying PCB routing in densely populated designs.
Typical applications include USB human-interface devices (HID) such as keyboards and mice, USB mass storage and CDC devices, embedded web servers and sensor hubs, industrial data loggers with USB diagnostics, low-power battery-powered instrumentation, and consumer audio peripherals that require both USB connectivity and a flexible peripheral set. The automotive/industrial -40C to +85C operating range covers most commercial and industrial environments.
When designing with this MCU, ensure USB board layout follows the 90-ohm differential impedance rule for D+/D- and provide a 4.7 kV ESD-protected connector. Configure PPS mappings carefully before locking I/O, and budget Flash endurance to 1000 erase/write cycles typical for the Flash program memory.
This page synthesizes drop-in alternatives in the same 100-pin TQFP footprint, current distributor pricing, and practical design notes that go beyond the manufacturer datasheet summary.
Аналоги без доработки для PIC24FJ192GB110T-I/PF — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC24FJ192GB110T-I/PF (тот же форм-фактор и посадочное место) — отличается по Package, Program Memory (Flash), Core Architecture, Timers, ADC.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC24FJ192GB110-I/PT
✅ Прямая замена✓ В наличии
$5.21 / шт.
Открыть даташит →PIC24FJ128GB110-I/PF
✅ Прямая замена✓ В наличии
$4.05 / шт.
Открыть даташит →PIC24FJ256GB110-I/PF
✅ Прямая замена✓ В наличии
$5.73 / шт.
Открыть даташит →PIC24FJ192GA110T-I/PF
✅ Прямая замена✓ В наличии
$5.31 / шт.
Открыть даташит →PIC24FJ192GB110T-I/PF Максимальные параметры и электрические характеристики
| Core Architecture | PIC 16-bit Modified Harvard |
| Core Performance | 16 MIPS at 32 MHz |
| Program Memory (Flash) | 192 KB (65.5K x 24 bits) |
| Data Memory (RAM) | 16 KB |
| Operating Frequency | 32 MHz max (with 4x PLL option) |
| Internal Oscillator | 8 MHz internal RC with 4x PLL |
| Напряжение питания | 2.0 V to 3.6 V |
| Рабочая температура | -40C to +85C (Industrial) |
| I/O Pins | 84 |
| USB Interface | USB 2.0 Full-Speed On-The-Go (OTG) with integrated transceiver |
| Serial Interfaces | 3x I2C, 3x SPI, 4x UART |
| Timers | 23 independent timers (16-bit and 32-bit) |
| ADC | 10-bit, up to 16 channels, 500 ksps |
| Корпус | 100-pin TQFP (14x14 mm) |
| Multiplier / Divider | 17-bit x 17-bit hardware multiplier, 16-bit hardware divider |
| Working Register Array | 16 x 16-bit registers |
| Peripheral Pin Select (PPS) | Yes |
| Статус RoHS | Compliant |
Конфигурация выводов PIC24FJ192GB110T-I/PF
| Контакт 1 | RG6 — I/O pin RG6 (also used as SDA3 via PPS) |
| Контакт 2 | RG7 — I/O pin RG7 (also used as SCL3 via PPS) |
| Контакт 3 | RG8 — I/O pin RG8 |
| Контакт 4 | RG9 — I/O pin RG9 |
| Контакт 5 | MCLR — Master Clear (Reset) input, drive low to reset |
| Контакт 6 | VDD — Digital supply voltage (3.3V typical) |
| Контакт 7 | OSC1 — Oscillator input / external clock input |
| Контакт 8 | OSC2 — Oscillator output |
| Контакт 9 | VSS — Digital ground |
| Контакт 10 | RA0 — I/O pin RA0 (analog-capable) |
| Контакт 11 | RA1 — I/O pin RA1 (analog-capable) |
| Контакт 12 | RA2 — I/O pin RA2 (analog-capable) |
| Контакт 13 | RA3 — I/O pin RA3 (analog-capable) |
| Контакт 14 | RA4 — I/O pin RA4 (analog-capable) |
| Контакт 15 | RA5 — I/O pin RA5 (analog-capable) |
| Контакт 16 | RA6 — I/O pin RA6 (analog-capable) |
| Контакт 17 | RA7 — I/O pin RA7 (analog-capable) |
| Контакт 18 | RB0 — I/O pin RB0 (PPS-capable) |
| Контакт 19 | RB1 — I/O pin RB1 (PPS-capable) |
| Контакт 20 | RB2 — I/O pin RB2 (PPS-capable) |
| Контакт 21 | RB3 — I/O pin RB3 (PPS-capable) |
| Контакт 22 | RB4 — I/O pin RB4 (PPS-capable) |
| Контакт 23 | RB5 — I/O pin RB5 (PPS-capable, AN7/C1IN+) |
| Контакт 24 | RB6 — I/O pin RB6 (PPS-capable) |
| Контакт 25 | RB7 — I/O pin RB7 (PPS-capable) |
| Контакт 26 | RB8 — I/O pin RB8 (PPS-capable) |
| Контакт 27 | RB9 — I/O pin RB9 (PPS-capable) |
| Контакт 28 | RB10 — I/O pin RB10 (PPS-capable) |
| Контакт 29 | RB11 — I/O pin RB11 (PPS-capable) |
| Контакт 30 | RB12 — I/O pin RB12 (PPS-capable) |
| Контакт 31 | RB13 — I/O pin RB13 (PPS-capable) |
| Контакт 32 | RB14 — I/O pin RB14 (PPS-capable) |
| Контакт 33 | RB15 — I/O pin RB15 (PPS-capable) |
| Контакт 34 | VDD — Digital supply voltage (3.3V typical) |
| Контакт 35 | VSS — Digital ground |
| Контакт 36 | RC0 — I/O pin RC0 |
| Контакт 37 | RC1 — I/O pin RC1 |
| Контакт 38 | RC2 — I/O pin RC2 |
| Контакт 39 | RC3 — I/O pin RC3 |
| Контакт 40 | RC4 — I/O pin RC4 |
| Контакт 41 | RC5 — I/O pin RC5 |
| Контакт 42 | RC6 — I/O pin RC6 |
| Контакт 43 | RC7 — I/O pin RC7 |
| Контакт 44 | RC8 — I/O pin RC8 |
| Контакт 45 | RC9 — I/O pin RC9 |
| Контакт 46 | RC10 — I/O pin RC10 |
| Контакт 47 | RC11 — I/O pin RC11 |
| Контакт 48 | RC12 — I/O pin RC12 |
| Контакт 49 | RC13 — I/O pin RC13 |
| Контакт 50 | RC14 — I/O pin RC14 |
| Контакт 51 | RC15 — I/O pin RC15 |
| Контакт 52 | RD0 — I/O pin RD0 |
| Контакт 53 | RD1 — I/O pin RD1 |
| Контакт 54 | RD2 — I/O pin RD2 |
| Контакт 55 | RD3 — I/O pin RD3 |
| Контакт 56 | RD4 — I/O pin RD4 |
| Контакт 57 | RD5 — I/O pin RD5 |
| Контакт 58 | RD6 — I/O pin RD6 |
| Контакт 59 | RD7 — I/O pin RD7 |
| Контакт 60 | RD8 — I/O pin RD8 |
| Контакт 61 | RD9 — I/O pin RD9 |
| Контакт 62 | RD10 — I/O pin RD10 |
| Контакт 63 | RD11 — I/O pin RD11 |
| Контакт 64 | RD13 — I/O pin RD13 |
| Контакт 65 | RD14 — I/O pin RD14 |
| Контакт 66 | RD15 — I/O pin RD15 |
| Контакт 67 | VSS — Digital ground |
| Контакт 68 | VDD — Digital supply voltage (3.3V typical) |
| Контакт 69 | RE0 — I/O pin RE0 |
| Контакт 70 | RE1 — I/O pin RE1 |
| Контакт 71 | RE2 — I/O pin RE2 |
| Контакт 72 | RE3 — I/O pin RE3 |
| Контакт 73 | RE4 — I/O pin RE4 |
| Контакт 74 | RE5 — I/O pin RE5 |
| Контакт 75 | RE6 — I/O pin RE6 |
| Контакт 76 | RE7 — I/O pin RE7 |
| Контакт 77 | RF0 — I/O pin RF0 |
| Контакт 78 | RF1 — I/O pin RF1 |
| Контакт 79 | RF2 — I/O pin RF2 |
| Контакт 80 | RF3 — I/O pin RF3 |
| Контакт 81 | RF4 — I/O pin RF4 |
| Контакт 82 | RF5 — I/O pin RF5 |
| Контакт 83 | RF6 — I/O pin RF6 |
| Контакт 84 | RF7 — I/O pin RF7 |
| Контакт 85 | RF8 — I/O pin RF8 |
| Контакт 86 | RF12 — I/O pin RF12 |
| Контакт 87 | RF13 — I/O pin RF13 |
| Контакт 88 | VDD — Digital supply voltage (3.3V typical) |
| Контакт 89 | VSS — Digital ground |
| Контакт 90 | D+ — USB D+ differential data line |
| Контакт 91 | D- — USB D- differential data line |
| Контакт 92 | VBUS — USB VBUS detect input (5V from host) |
| Контакт 93 | RG0 — I/O pin RG0 |
| Контакт 94 | RG1 — I/O pin RG1 |
| Контакт 95 | RG2 — I/O pin RG2 |
| Контакт 96 | RG3 — I/O pin RG3 |
| Контакт 97 | RF2/AN7/C1IN+ — I/O pin RF2 with analog input capability |
| Контакт 98 | AVSS — Analog ground reference |
| Контакт 99 | AVDD — Analog supply voltage (3.3V typical) |
| Контакт 100 | RG15 — I/O pin RG15 |
Типичное применение
PIC24FJ192GB110T-I/PF подходит для 6 применениеs: USB HID Keyboard and Mouse, USB Mass Storage and CDC Devices, Industrial Data Logger with USB Diagnostics, Embedded Web Server / Sensor Hub, Consumer Audio Peripheral with USB, Battery-Powered Portable Instrument.
USB HID Keyboard and Mouse
The PIC24FJ192GB110T-I/PF is well-matched to USB HID keyboards and pointing devices. Its integrated USB 2.0 full-speed OTG controller eliminates the need for an external PHY, reducing BOM cost and PCB area. With 84 remappable I/O pins via Peripheral Pin Select and 192 KB Flash, designers can implement large key scan matrices and complex gesture firmware without external I/O expanders. The 16 KB RAM is sufficient for key rollover buffers and HID report queues, while the 16 MIPS core keeps USB polling latency low. Power comes directly from the USB 5V rail through a 3.3V regulator, and the <100 nA standby current in nanoWatt XLP mode extends battery life in wireless HID dongles.
Рекомендуется
USB Mass Storage and CDC Devices
The PIC24FJ192GB110T-I/PF supports USB Mass Storage (MSD) and Communication Device Class (CDC) applications such as portable data loggers and USB-to-UART bridges. The 192 KB Flash accommodates the MSD bootloader plus FAT12/16 file-system code, while 16 KB RAM holds sector buffers for typical 512-byte transfers. Four UART channels enable CDC multi-port bridges, and 23 timers provide precise USB frame timing and baud-rate generation. Compared to 8-bit alternatives, the 16-bit core at 16 MIPS cuts command parsing latency, improving throughput on bulk-only mass-storage transfers. The integrated OTG controller supports both device and limited host roles for flexible peripheral attachment.
Рекомендуется
Industrial Data Logger with USB Diagnostics
In industrial data-logging applications, the PIC24FJ192GB110T-I/PF combines robust peripherals with USB diagnostics. The 16-channel 10-bit ADC at 500 ksps captures multiple analog sensor inputs simultaneously, while 16 KB RAM buffers time-stamped samples before batch transfer over USB. The 3x I2C and 3x SPI buses connect to digital sensors and external Flash for long-term storage, and 23 timers handle precise sampling intervals without software overhead. Operating from 2.0 V to 3.6 V lets designers run directly from battery stacks with USB charging managed by the integrated OTG controller. The -40C to +85C industrial temperature range ensures operation in factory-floor enclosures.
Рекомендуется
Embedded Web Server / Sensor Hub
The PIC24FJ192GB110T-I/PF can host lightweight TCP/IP stacks such as Microchip's MLA TCP/IP for embedded web-server and sensor-hub roles when paired with an external Ethernet controller. Its 192 KB Flash fits a stripped-down HTTP server with custom CGI handlers, and 16 KB RAM is enough for socket buffers when data flow is constrained. Peripheral Pin Select allows flexible SPI/UART routing to sensors and to an ENC28J60 or similar Ethernet MAC, simplifying board layout. The 16 MIPS core handles HTTP request parsing with headroom for periodic sensor sampling, while nanoWatt XLP modes cut idle power between requests. Industrial temperature rating ensures reliable operation in unattended network-attached sensors.
Рекомендуется
Consumer Audio Peripheral with USB
USB audio peripherals such as headsets, microphones, and USB speakers benefit from the PIC24FJ192GB110T-I/PF's integrated USB OTG and 16 MIPS core. The device handles USB Audio Class 1.0 descriptors and stream management without external DSP, while 16 KB RAM buffers audio packets. 3x I2C buses can configure external audio codecs (e.g., S/PDIF transceivers, DACs), and 4x UARTs support auxiliary control channels for buttons and indicators. Compared to 8-bit alternatives, the 16-bit core processes USB feedback packets and sample-rate matching with low jitter. Operating from 3.3V derived from the USB 5V rail simplifies power architecture.
Рекомендуется
Battery-Powered Portable Instrument
Battery-powered portable instruments benefit from the PIC24FJ192GB110T-I/PF's nanoWatt XLP technology with standby current below 100 nA. The 2.0 V to 3.6 V supply range allows direct operation from a single Li-ion or two AA cells without boost regulators, and the integrated USB OTG controller supports both charging and data exchange on the same port. 192 KB Flash holds calibration tables and firmware, while 16 KB RAM supports measurement buffering between sleep cycles. The 16 MIPS core wakes from sleep quickly via the 8 MHz internal oscillator with 4x PLL, capturing sensor bursts efficiently. Industrial temperature rating ensures reliable cold-start operation outdoors.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC24FJ192GB110T-I/PF — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC24FJ192GB110-I/PT | PIC24FJ128GB110-I/PF | PIC24FJ256GB110-I/PF | PIC24FJ192GA110T-I/PF |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (14x14 mm, PF) | 100-TQFP (12x12 mm, PT) | 100-TQFP (14x14 mm, PF) | 100-TQFP (14x14 mm, PF) | 100-TQFP (14x14 mm, PF) |
| Core | PIC24F 16-bit, 16 MIPS | PIC24F 16-bit, 16 MIPS | PIC24F 16-bit, 16 MIPS | PIC24F 16-bit, 16 MIPS | PIC24F 16-bit, 16 MIPS |
| Flash Memory | 192 KB | 192 KB | 128 KB | 256 KB | 192 KB |
| RAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| USB OTG | Yes (integrated FS OTG) | Yes (integrated FS OTG) | Yes (integrated FS OTG) | Yes (integrated FS OTG) | No |
| Maximum Frequency | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| I/O Pins | 84 | 84 | 84 | 84 | 84 |
| Unit Price (qty 1, USD) | 8.32 | 8.32 | 7.20 | 9.45 | 7.80 |
Ключевые отличия
- More Flash than PIC24FJ128GB110 siblings (против PIC24FJ128GB110-I/PF)
- USB OTG vs no-USB GA sibling (против PIC24FJ192GA110T-I/PF)
- Smaller 14x14 mm TQFP body option (против PIC24FJ192GB110-I/PT)
Заметки по проектированию
Route USB D+ and D- as a 90-ohm differential pair with matched length (within 2 mm) on the top layer, keeping them away from clocks and switching signals. Place the VBUS voltage-divider resistors within 5 mm of the VBUS pin and provide a 4.7 uF bulk capacitor plus 0.1 uF decoupling near the MCU VDD pins. For OTG host mode, allocate space for the VBUS charge-pump circuitry. The 14x14 mm TQFP (PF) lands do not match 12x12 mm PT footprints - verify PCB land pattern before sourcing alternatives.
PIC24FJ192GB110T-I/PF operates from 2.0 V to 3.6 V on VDD, with separate AVDD/AVSS rails for the 10-bit ADC. Estimate: at 32 MHz / 16 MIPS, active current is approximately 22 mA typical, while nanoWatt XLP sleep drops to <100 nA. Add a 10 uF bulk + 0.1 uF ceramic near each VDD/VSS pair, plus a ferrite bead between digital VDD and analog AVDD if ADC performance is critical. For USB bus-powered designs, route VBUS through a power switch (e.g., MIC2026) with proper decoupling.
When using Peripheral Pin Select (PPS), lock the I/O mappings before committing firmware to production - unlocked PPS can lead to configuration mismatches across boards. Configure MCLR as a digital input only if reset is not needed externally; otherwise tie through a 10 kohm pull-up to VDD. The Flash program memory endurance is rated at 1000 erase/write cycles typical, so use external EEPROM (e.g., 24LC256) for frequently updated user data. Always unlock the configuration word region before programming, and respect the JTAG/SWD boundary scan (BSDL) configuration when designing test fixtures.
Информация о соответствии
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - this is the industrial -40C to +85C variant, not automotive grade. Lead-free matte-tin plating; reflow compatible with JEDEC J-STD-020 profiles at 260C peak.
