PIC24FJ256GA406-I/PT - 256KB Flash 16-bit XLP MCU | Microchip
Артикул: PIC24FJ256GA406-I/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $8.62 | $8,62 |
| 10 | $7.75 | $77,50 |
| 100 | $6.93 | $693,00 |
| 500 | $6.2 | $3.100,00 |
| 1.000 | $5.55 | $5.550,00 |
PIC24FJ256GA406-I/PT Обзор
What is a 16-bit MCU with XLP? A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and peripherals. The "16-bit" designation indicates the data path width, giving it 2x the data throughput of an 8-bit MCU while remaining simpler and lower-power than 32-bit Cortex-M parts. PIC24F microcontrollers sit in the hierarchy: 16-bit MCU -> PIC24 family -> XLP 24F series -> PIC24FJ256GA406 sub-family. The "XLP" (eXtreme Low Power) branding refers to Microchip's nanoWatt XLP technology that enables deep sleep currents below 1 µA, making these parts ideal for battery-powered and energy-harvesting designs.
Key features include the integrated crypto engine with AES-128 and code-guard security, 256 KB self-programmable Flash with ECC, segmented LCD driver supporting up to 100 segments, and on-chip USB 2.0 full-speed OTG. The Peripheral Pin Select (PPS) remapping system allows flexible I/O assignments, while the 24-channel 10-bit ADC and dual analog comparators serve sensor-rich applications. XLP technology provides 9 deep-power-down modes with currents as low as 20 nA in deep sleep, which is critical for wearables and metering.
Architecturally, the device uses a Harvard RISC core with modified instruction sets and a 16-element by 16-bit working register array, achieving 16 MIPS at 32 MHz. The 256 KB Flash is dual-partitioned to support live firmware updates, and 16 KB SRAM supports data-intensive segments. Integrated DMA enables peripheral-to-memory transfers without CPU intervention, freeing cycles for application logic. The crypto engine offloads AES encryption tasks, while the segmented LCD controller with integrated charge pump drives resistive LCD glass from a 2.0-3.6 V supply.
Typical applications include industrial metering (electricity, gas, water), portable medical devices, secure IoT edge nodes with over-the-air firmware updates, building automation panels with LCD keypads, and USB-based data loggers. The wide 2.0 V to 3.6 V operating range and 1.8 V minimum Flash programming voltage support single-cell Li-ion and two-AA battery topologies.
When designing with this part, allocate PCB area for an external 12 MHz or 16 MHz crystal and the segmented LCD bias capacitors; the integrated charge pump simplifies low-temperature LCD contrast but requires proper bulk decoupling. The PPS system should be configured early in firmware since remapping after peripheral initialization can cause transient glitches. For low-power modes, verify the brown-out reset threshold matches the battery discharge curve to avoid spurious resets in deep sleep.
This page synthesizes distributor pricing, drop-in alternatives within the same 64-pin TQFP footprint, and practical design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для PIC24FJ256GA406-I/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC24FJ256GA406-I/PT (тот же форм-фактор и посадочное место) — отличается по Package, Core Architecture, Operating Temperature, ADC, Program Memory (Flash).
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC24FJ256GA406T-I/PT
✅ Прямая замена✓ В наличии
$3.65 / шт.
Открыть даташит →PIC24FJ256GA406-I/MR
✅ Прямая замена✓ В наличии
$3.79 / шт.
Открыть даташит →PIC24FJ256GA106-I/PT
✅ Прямая замена✓ В наличии
$4.3 / шт.
Открыть даташит →PIC24FJ128GA006-I/PT
✅ Прямая замена✓ В наличии
$4.95 / шт.
Открыть даташит →DSPIC33EV64GM006-I/PT
✅ Прямая замена✓ В наличии
$4.65 / шт.
Открыть даташит →DSPIC33EP256MU810-I/PT
✅ Прямая замена✓ В наличии
$10.2 / шт.
Открыть даташит →PIC24FJ256GA406-I/PT Максимальные параметры и электрические характеристики
| Core Architecture | PIC24F 16-bit Harvard RISC |
| Family | PIC® XLP™ 24F |
| Maximum CPU Speed | 32 MHz / 16 MIPS |
| Program Flash Memory | 256 KB (85.5K x 24) |
| RAM | 16 KB |
| Operating Voltage Range | 2.0 V to 3.6 V |
| ADC | 24-channel 10-bit |
| USB | USB 2.0 Full-Speed OTG |
| LCD Segments | Up to 100 segments with charge pump |
| Crypto Engine | AES-128, Code-Guard security |
| CCP Modules | 5 (MCCP/SCCP) |
| Serial Communication | UART, SPI, I²C with PPS remapping |
| DMA Channels | Yes (peripheral-to-memory) |
| Корпус | 64-pin TQFP (10x10 mm) |
| Рабочая температура | -40 C to +85 C (Industrial) |
| Тип монтажа | Surface Mount |
| Packing Media | Tray (160 per tray) |
| Статус RoHS | Compliant |
Конфигурация выводов PIC24FJ256GA406-I/PT
| Контакт 1 | RG15 — I/O port RG15 |
| Контакт 2 | RP20/RD4 — Remappable I/O RD4 |
| Контакт 3 | RP21/RD5 — Remappable I/O RD5 |
| Контакт 4 | RP22/RD6 — Remappable I/O RD6 |
| Контакт 5 | RP23/RD7 — Remappable I/O RD7 |
| Контакт 6 | RC12 — I/O port RC12 |
| Контакт 7 | RC13 — I/O port RC13 |
| Контакт 8 | RC14 — I/O port RC14 |
| Контакт 9 | RC15 — I/O port RC15 |
| Контакт 10 | RB0 — I/O port RB0 |
| Контакт 11 | RB1 — I/O port RB1 |
| Контакт 12 | RB2 — I/O port RB2 |
| Контакт 13 | RB3 — I/O port RB3 |
| Контакт 14 | RB4 — I/O port RB4 |
| Контакт 15 | RB5 — I/O port RB5 |
| Контакт 16 | RB6 — I/O port RB6 / ICSPCLK |
| Контакт 17 | RB7 — I/O port RB7 / ICSPDAT |
| Контакт 18 | RB8 — I/O port RB8 |
| Контакт 19 | RB9 — I/O port RB9 |
| Контакт 20 | RB10 — I/O port RB10 |
| Контакт 21 | RB11 — I/O port RB11 |
| Контакт 22 | D+ — USB D+ data line |
| Контакт 23 | D- — USB D- data line |
| Контакт 24 | VBUS — USB VBUS sense |
| Контакт 25 | VUSB3V3 — USB internal transceiver supply |
| Контакт 26 | RA0 — I/O port RA0 |
| Контакт 27 | VSS — Ground reference |
| Контакт 28 | VDD — Positive supply voltage (2.0-3.6 V) |
| Контакт 29 | RA1 — I/O port RA1 |
| Контакт 30 | RA2 — I/O port RA2 |
| Контакт 31 | VSS — Ground reference |
| Контакт 32 | RA3 — I/O port RA3 |
| Контакт 33 | RA4 — I/O port RA4 |
| Контакт 34 | RA5 — I/O port RA5 |
| Контакт 35 | RA6 — I/O port RA6 |
| Контакт 36 | RA7 — I/O port RA7 |
| Контакт 37 | RC0 — I/O port RC0 |
| Контакт 38 | RC1 — I/O port RC1 |
| Контакт 39 | RC2 — I/O port RC2 |
| Контакт 40 | RC3 — I/O port RC3 |
| Контакт 41 | RC4 — I/O port RC4 |
| Контакт 42 | RC5 — I/O port RC5 |
| Контакт 43 | RC6 — I/O port RC6 |
| Контакт 44 | RC7 — I/O port RC7 |
| Контакт 45 | RC8 — I/O port RC8 |
| Контакт 46 | RC9 — I/O port RC9 |
| Контакт 47 | RD0 — I/O port RD0 |
| Контакт 48 | RD1 — I/O port RD1 |
| Контакт 49 | RD2 — I/O port RD2 |
| Контакт 50 | RD3 — I/O port RD3 |
| Контакт 51 | RD8 — I/O port RD8 |
| Контакт 52 | RD9 — I/O port RD9 |
| Контакт 53 | RD10 — I/O port RD10 |
| Контакт 54 | RD11 — I/O port RD11 |
| Контакт 55 | RD12 — I/O port RD12 |
| Контакт 56 | RD13 — I/O port RD13 |
| Контакт 57 | RD14 — I/O port RD14 |
| Контакт 58 | RD15 — I/O port RD15 |
| Контакт 59 | RE0 — I/O port RE0 |
| Контакт 60 | VDD — Positive supply voltage (2.0-3.6 V) |
| Контакт 61 | VSS — Ground reference |
| Контакт 62 | RE1 — I/O port RE1 |
| Контакт 63 | RE2 — I/O port RE2 |
| Контакт 64 | RE3 — I/O port RE3 |
Типичное применение
PIC24FJ256GA406-I/PT подходит для 7 применениеs: Industrial Electricity Metering with LCD, Secure IoT Edge Node with OTA Updates, Portable Medical Glucose / Patient Monitor, Building Automation HMI with LCD Keypad, USB Data Logger / Tethered Sensor, Automotive Dashboard Sub-Display, Wearables with Segmented OLED/LCD Display.
Industrial Electricity Metering with LCD
The PIC24FJ256GA406-I/PT is purpose-built for single-phase and polyphase electricity meters, integrating a segmented LCD controller capable of driving up to 100 segments from a 2.0 V to 3.6 V supply. The integrated charge pump maintains LCD contrast down to -40 C, eliminating the need for an external bias generator. With 16 KB RAM and 256 KB Flash, the device can store calibration constants, rolling demand logs, and TOU tariff schedules directly on-chip. AES-128 hardware encryption secures AMI (Advanced Metering Infrastructure) communication against tampering, while XLP nanoWatt technology reduces sleep current to 20 nA typical, allowing battery-backed metering to operate for over 10 years on a single cell.
Рекомендуется
Secure IoT Edge Node with OTA Updates
The PIC24FJ256GA406-I/PT's dual-partition 256 KB Flash enables fail-safe over-the-air firmware updates without an external SPI flash chip, reducing BOM cost in connected sensor nodes. The hardware AES-128 engine accelerates TLS handshake and secures LoRaWAN/Wi-Fi payloads at the edge without burdening the CPU. Peripheral Pin Select (PPS) allows flexible assignment of UART/SPI/I²C to any I/O pin, simplifying PCB routing for multi-radio IoT modules. USB 2.0 full-speed OTG provides local provisioning and firmware recovery interfaces. The XLP deep-sleep modes below 1 µA enable years of battery life on coin-cell-powered environmental sensors.
Рекомендуется
Portable Medical Glucose / Patient Monitor
Battery-powered medical devices benefit from the PIC24FJ256GA406-I/PT's XLP technology, which delivers sleep currents below 1 µA while preserving RTC operation for time-stamped patient records. The 24-channel 10-bit ADC multiplexes multiple biosensors (glucose strips, temperature, pulse oximetry) through a single MCU, while the segmented LCD driver displays readings directly on the meter housing. Hardware AES-128 encryption meets HIPAA data-at-rest requirements for stored patient logs in Flash. The 2.0-3.6 V wide operating range accepts direct connection to a single CR2032 coin cell or a 2xAA alkaline pack, eliminating external boost regulators.
Рекомендуется
Building Automation HMI with LCD Keypad
HVAC controllers, access panels, and security keypads leverage the PIC24FJ256GA406-I/PT's segmented LCD driver to display multi-line status messages, time, and temperature without an external LCD controller chip. The on-chip AES engine authenticates BACnet or Modbus commands between panels and the central BMS, preventing unauthorized control access. Five CCP modules generate PWM for damper motors, valve actuators, and LED backlight dimming without additional timer ICs. The 64-pin TQFP package provides ample I/O for keypad scanning matrices up to 8x8, while PPS remapping lets PCB designers optimize trace routing under the LCD glass.
Рекомендуется
USB Data Logger / Tethered Sensor
The PIC24FJ256GA406-I/PT's integrated USB 2.0 full-speed OTG transceiver eliminates an external PHY chip in tethered data loggers, directly connecting to a host PC for high-speed log retrieval. With 16 MIPS performance and 16 KB RAM, the MCU can sample multiple sensors at 100 kHz aggregate rates, buffer bursts in SRAM, and stream over USB in real time. The 256 KB dual-partition Flash stores bootloaders and application code with field-upgradeable firmware via USB. PPS flexibility allows the same firmware to support USB, UART, or SPI host connections by remapping pins at runtime without hardware redesign.
Рекомендуется
Automotive Dashboard Sub-Display
While the PIC24FJ256GA406-I/PT is industrial-temperature graded (-40 C to +85 C), its segmented LCD driver and CAN-friendly peripherals make it suitable for aftermarket motorcycle, marine, and powersports dashboards where automotive-grade qualification is not required. The integrated charge pump keeps LCD contrast stable across the wide temperature range encountered in motorcycle gauge clusters. Five CCP modules drive tachometer, speedometer, and fuel gauge stepper motors simultaneously, while the 24-channel ADC reads multiple analog sender inputs. PPS pin mapping simplifies routing in space-constrained dashboard enclosures.
Рекомендуется
Wearables with Segmented OLED/LCD Display
Fitness bands and smart watches benefit from the PIC24FJ256GA406-I/PT's XLP nanoWatt technology, providing 20 nA deep-sleep current to extend coin-cell battery life beyond one year. The segmented LCD driver directly interfaces with low-power reflective displays, drawing zero current when the screen content is static, unlike OLED displays that require constant refresh. Hardware AES-128 secures Bluetooth pairing and over-the-air health data syncs to mobile apps. The compact 64-pin TQFP (10x10 mm) package fits inside small wearable enclosures while exposing enough I/O for heart-rate sensor I²C buses and accelerometer SPI interfaces via PPS remapping.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC24FJ256GA406-I/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC24FJ256GA406T-I/PT | PIC24FJ256GA106-I/PT | PIC24FJ128GA006-I/PT | DSPIC33EV64GM006-I/PT | DSPIC33EP256MU810-I/PT |
|---|---|---|---|---|---|---|
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) - identical | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 256 KB | 256 KB | 256 KB | 128 KB | 64 KB | 256 KB |
| RAM | 16 KB | 16 KB | 16 KB | 8 KB | 8 KB | 20 KB |
| CPU Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 70 MIPS (DSP) | 70 MIPS (DSP) |
| AES-128 Crypto Engine | Yes | Yes | No | No | No | No |
| USB 2.0 OTG | Yes (integrated PHY) | Yes (integrated PHY) | No | No | No | Yes (integrated PHY) |
| Segmented LCD Driver | Yes (up to 100 segments) | Yes (up to 100 segments) | No | No | No | No |
| XLP NanoWatt Sleep | Yes (down to 20 nA) | Yes (down to 20 nA) | Yes | Yes | Partial | No |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Param Match Percentage | 100% | 100% | 80% | 70% | 70% | 80% |
Ключевые отличия
- Integrated AES-128 hardware crypto engine (против PIC24FJ256GA106-I/PT)
- Segmented LCD driver with charge pump (против DSPIC33EP256MU810-I/PT)
- XLP nanoWatt sleep down to 20 nA (против DSPIC33EV64GM006-I/PT)
Заметки по проектированию
Estimated: at VDD=3.3 V and 32 MHz active mode, the PIC24FJ256GA406-I/PT draws approximately 15 mA typical (per Microchip datasheet DC characteristics). For battery-powered designs, leverage the XLP deep-sleep mode with the on-chip RTCC to achieve 20 nA standby current while maintaining calendar time. Place a 10 µF tantalum plus 100 nF ceramic decoupling capacitor pair within 5 mm of each VDD pin (28, 60) to suppress switching transients during peripheral wake-up events.
Route the segmented LCD bias lines (SEG/COM) away from high-frequency digital traces to minimize coupling into the analog charge-pump output. Per Microchip application note AN587, keep LCD traces short and shielded with a ground guard ring to reduce ghosting. The USB D+/D- traces (pins 22, 23) must be 90-ohm differential and length-matched within 2 mm to meet USB 2.0 full-speed compliance. The 12 MHz or 16 MHz crystal traces to OSCI/OSCO should be < 5 mm and guarded by a ground pour.
Do not skip the external 10 µF bulk capacitor on VUSB3V3 (pin 25) - the internal USB transceiver requires this for stable DP/DN signalling. Per the Microchip datasheet 70000575B, peripheral pin select (PPS) registers must be configured immediately after Reset and before any peripheral initialization; remapping later causes transient glitches on remapped I/O. The CONFIG words must be programmed with the correct IESO and FNOSC bits to ensure fail-safe clock switching from the internal FRC to the external crystal after startup.
Информация о соответствии
RoHS compliant per Microchip product page. Industrial temperature grade (-40 C to +85 C). Not AEC-Q100 qualified - this is a non-automotive part. Halogen-free status not explicitly stated in provided data.
