PIC24FJ32GP205-I/PT - 16-Bit 32MHz USB MCU | Microchip
Артикул: PIC24FJ32GP205-I/PT ✓ АктивенPIC24FJ32GP205-I/PT Обзор
A PIC24FJ microcontroller is a 16-bit embedded controller designed for low-power, mixed-signal, communications, and control products. The PIC24F core provides a 16 MIPS instruction rate at the maximum 32 MHz clock, while the GP2/GU2 family adds peripheral blocks that can operate independently of the CPU. This hierarchy places the device between general-purpose 8-bit microcontrollers and more complex 32-bit application processors.
The PIC24FJ32GP205-I/PT provides 32 KB of ECC Flash, organized in the distributor listing as 11K by 24 bits, and 8 KB of SRAM. ECC Flash supports reliable firmware storage, while the SRAM provides working memory for control loops, USB stacks, and protocol handling. The family also supports Full Speed USB 2.0 Host, Device, and OTG operation, making the device relevant to USB-enabled control systems.
The GP2/GU2 family is designed around low-power operation. Microchip describes sleep current as reaching a few hundred nanoamperes while retaining core-independent peripheral operation. This architecture is useful when a system must wake periodically, perform a short measurement or control task, and return to a low-power state without leaving peripherals active.
Typical applications include USB-connected instrumentation, industrial control panels, medical monitoring equipment, portable data-acquisition systems, and low-power sensor interfaces. In these systems, the MCU can manage USB communication while autonomous peripheral functions handle timing-sensitive or repetitive operations.
Design considerations include decoupling the 3.3 V supply, assigning USB D+/D- connections to the correct pins, and confirming peripheral availability for the selected 48-pin variant. Because the exact programming and peripheral configuration depends on the individual device variant, use the PIC24FJ32GP205 family documentation and the device programming guide when assigning pins and clocks.
This page consolidates the verified product identity, electrical specifications, package information, application guidance, and same-family replacement considerations into an engineering-focused reference for the PIC24FJ32GP205-I/PT.
Аналоги без доработки для PIC24FJ32GP205-I/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC24FJ32GP205-I/PT (тот же форм-фактор и посадочное место) — отличается по Package, Architecture, CPU Performance, Product Type, Program Memory.
PIC24FJ32GP205-E/PT
✅ Прямая заменаУточнить цену
Открыть даташит →PIC24FJ32GP204-I/PT
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
PIC24FJ32GP205-I/PT Максимальные параметры и электрические характеристики
| Product Type | 16-bit microcontroller (MCU) |
| Architecture | PIC24F |
| Максимальная тактовая частота | 32 MHz |
| Instruction Rate | 16 MIPS |
| Program Flash Memory | 32 KB ECC Flash |
| Program Memory Organization | 11K x 24 bits |
| SRAM | 8 KB |
| USB Support | Full Speed USB 2.0 Host, Device, and OTG |
| Low-Power Technology | XLP |
| Sleep Current | Down to a few hundred nA |
| Core-Independent Peripherals | Supported |
| Корпус | 48-pin TQFP |
| Package Dimensions | 7 mm x 7 mm |
| Тип монтажа | Surface mount |
| Temperature Grade | Industrial grade |
Руководство по цоколевке PIC24FJ32GP205-I/PT в корпусе 7 mm x 7 mm
Цоколевка для PIC24FJ32GP205-I/PT (корпус 7 mm x 7 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для PIC24FJ32GP205-I/PT.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
PIC24FJ32GP205-I/PT подходит для 6 применениеs: USB Industrial Control Panel, Portable Data Acquisition, Medical Monitoring Interface, Low-Power Sensor Node, USB Connected Test Instrument, USB Networking Adapter.
USB Industrial Control Panel
PIC24FJ32GP205-I/PT fits a USB-enabled industrial control panel that combines host or device connectivity with local sensing and actuator control. Its 16-bit PIC24F core executes at 32 MHz and 16 MIPS, while 32 KB of ECC Flash provides protected space for control firmware and 8 KB of RAM supports USB buffers and working variables. The 48-pin TQFP package exposes more I/O than a low-pin-count variant, allowing panel keys, status indicators, sensor inputs, and communications functions to share one controller. USB power and routing must follow the family implementation requirements, while the industrial-temperature suffix supports a broader environmental design target.
Рекомендуется
Portable Data Acquisition
PIC24FJ32GP205-I/PT is suitable for a portable data-acquisition unit that samples sensors, stores results locally, and transfers data over USB. The 32 MHz core provides useful throughput for interrupt-driven sampling and protocol formatting, while ECC Flash improves firmware-storage reliability in unattended equipment. Core-independent peripherals can continue time-based or repetitive operations while the CPU manages data transfer, reducing the risk of missed measurement intervals. Battery-powered designs should use the family’s XLP modes and activate only the peripherals needed during each operating phase. Select external analog front-end components according to the required sensor range rather than treating the MCU inputs as precision converters.
Рекомендуется
Medical Monitoring Interface
PIC24FJ32GP205-I/PT can serve as the low-power control and communications interface in a medical monitoring system. Its 32-bit-width PIC24F architecture operates at 32 MHz with 16 MIPS throughput, allowing the controller to coordinate sensor sampling, alarm thresholds, status LEDs, and a USB connection to a host. The 48-pin TQFP package provides enough pins for digital sensor interfaces and control signals, while the 8 KB RAM supports protocol and buffering tasks. For patient-connected products, maintain the separation required by the applicable medical system architecture, validate analog safety and isolation separately, and verify that the selected temperature grade matches the enclosure’s worst-case environment.
Рекомендуется
Low-Power Sensor Node
PIC24FJ32GP205-I/PT fits a battery-operated sensor node that periodically wakes, reads environmental inputs, and returns to sleep. The PIC24FJ GP2/GU2 family supports XLP operation with sleep current in the range of a few hundred nanoamperes while retaining core-independent peripherals. This architecture allows time-based functions to continue without keeping the CPU fully active. Its 32 MHz processing capability handles more demanding tasks than a basic wake-and-sample cycle, while 32 KB of ECC Flash protects operating firmware. The final power budget depends on supply voltage, sensor load, USB-state, and I/O configuration, so measure the assembled node across each duty cycle rather than relying only on the headline sleep figure.
Рекомендуется
USB Connected Test Instrument
PIC24FJ32GP205-I/PT is appropriate for a USB-connected test instrument that captures measurements, performs configuration, and exposes a control interface to a computer. The 32 MHz CPU and 16 MIPS execution rate support responsive command handling, while Full Speed USB 2.0 Host, Device, and OTG support simplifies connection to different test hosts. ECC Flash provides dependable firmware storage, and the 8 KB RAM can support USB descriptors, endpoint buffers, and application state. Keep sensitive analog circuitry away from USB return-current paths, follow the family decoupling recommendations, and validate signal integrity across the cable and host configuration used by the finished instrument.
Рекомендуется
USB Networking Adapter
PIC24FJ32GP205-I/PT can implement a compact USB networking or protocol-conversion adapter that bridges an external serial interface to a USB host or device. Its 16-bit architecture and 32 MHz clock provide enough performance for packet handling, buffering, and supervisory logic without requiring a 32-bit processor. The GP2 family’s Full Speed USB support and core-independent peripherals help separate communication tasks from timing-sensitive control functions. The 48-pin TQFP package also leaves additional pins for status LEDs, configuration inputs, and auxiliary interfaces. Firmware should be tested for USB suspend, resume, enumeration, and bus-fault recovery, while the PCB must provide the required USB routing and decoupling.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC24FJ32GP205-I/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC24FJ32GP205-E/PT | PIC24FJ32GP204-I/PT |
|---|---|---|---|
| Package | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Temperature Grade | Industrial grade | E-grade; exact limits require datasheet confirmation | Industrial grade |
Ключевые отличия
- Uses the industrial-temperature ordering option (против PIC24FJ32GP205-E/PT)
- Provides 32 KB ECC Flash and 8 KB RAM (против PIC24FJ32GP204-I/PT)
- Combines 32 MHz processing with USB peripheral support (против PIC24FJ32GP205-E/PT)
Заметки по проектированию
Place the device’s required supply capacitors close to the corresponding power and ground pins, and route USB D+/D- as a controlled impedance pair on the PCB. Keep USB routing away from clocks, switching nodes, and high-current return paths. Validate the final layer stack and trace geometry against the Microchip USB implementation guidance and the board’s actual USB connector requirements.
Use the family documentation to select the operating voltage range and identify all required VDD and VSS connections. Decoupling must be placed at the pins rather than at a remote bulk-capacitor location. If USB device power is supplied locally, isolate its current path from sensitive analog returns and verify brownout behavior during bus attachment, detachment, and host-driven bus-reset events.
Do not substitute the base PIC24FJ32GP205 or another suffix without checking temperature grade, package, pin functions, USB capability, memory configuration, and programming-device identification. The -I/PT order code combines the industrial-temperature grade with the 48-pin TQFP package. After replacement, confirm the exact MPN in the programmer configuration and repeat timing, USB enumeration, brownout, and peripheral tests.
The 48-pin TQFP package supports PCB-based heat spreading, but final thermal performance depends on copper area, airflow, and the device’s operating duty cycle. Keep high-current USB and external power-stage heat sources away from the MCU where practical. Validate enclosure temperature at the hottest expected operating point rather than relying only on the package’s maximum junction rating.
Информация о соответствии
The exact -I/PT order code is an industrial-temperature grade, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for this exact MPN.