PIC24FJ64GA010-I/PT - 16-bit MCU, 64KB Flash, 100-TQFP | Microchip
Артикул: PIC24FJ64GA010-I/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $7.5 | $7,50 |
| 10 | $6.78 | $67,80 |
| 100 | $5.92 | $592,00 |
| 500 | $5.21 | $2.605,00 |
| 1.000 | $4.63 | $4.630,00 |
PIC24FJ64GA010-I/PT Обзор
A 16-bit microcontroller (MCU) is a programmable processor that uses a 16-bit-wide data path, instruction word, and register file, giving it roughly an order of magnitude more computational throughput than 8-bit MCUs while retaining a deterministic, easy-to-debug interrupt model. Within the broader taxonomy, the PIC24F sits in the Microchip 16-bit MCU family above the PIC16 and below the dsPIC33/PIC32 32-bit families. It targets the same application space as ARM Cortex-M0/M0+ parts from competing vendors but uses a proprietary Harvard instruction set that allows deterministic interrupt latency and single-cycle execution of most instructions, including a single-cycle 17x16 hardware multiply.
Key features of this specific part include an 8 MHz internal RC oscillator with a 4x PLL option, multiple clock divide options, up to 16 MIPS sustained throughput, 84 general-purpose I/O pins, a 10-bit A/D converter with up to 16 channels, a 16-bit parallel master/slave port (PMP) for adding external graphics or memory, and the usual PIC24F peripherals - five 16-bit timers, two UART modules, two SPI modules, two I2C modules, and a real-time clock calendar (RTCC). The device operates from 2.0 V to 3.6 V and supports industrial temperature range -40C to +85C.
The PIC24F GA0 family targets applications that need more code space, RAM, and peripheral mix than an 8-bit PIC can deliver, while staying below the cost and complexity of a 32-bit MCU. It is commonly used in human-machine interface (HMI) panels, sensor hubs, low-cost instrumentation, and consumer appliances where the rich peripheral set reduces external component count. The 84 I/O count plus the parallel master port allow direct connection to TFT displays, external memory, or ASIC companion chips without glue logic.
Typical applications include industrial control, data acquisition, HMI displays, portable medical devices, and any embedded design requiring a balance of low power consumption and moderate processing performance. In battery-powered designs the PIC24F's low-power sleep modes (down to a few microamperes) combined with the RTCC allow real-time clock operation for years on a single cell.
When designing with this part, pay attention to the JTAG/ICSP programming pin pairs - PGECx/PGEDx - and the need for a stable VDD rail with at least 1 uF of decoupling close to every supply pin. Ensure the configuration bits are set in code or via the MPLAB X IDE to match the application's oscillator and watchdog requirements before the first instruction executes.
This page synthesizes distributor pricing, drop-in TQFP-100 alternatives, and practical design notes for the PIC24FJ64GA010-I/PT that are not consolidated on the manufacturer datasheet - giving procurement and firmware engineers a single reference for evaluation and BOM decisions.
Аналоги без доработки для PIC24FJ64GA010-I/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC24FJ64GA010-I/PT (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, ADC, Core Architecture, Program Memory (Flash).
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC24FJ128GA010-I/PT
✅ Прямая замена✓ В наличии
$4.95 / шт.
Открыть даташит →PIC24FJ64GA010T-I/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC24FJ128GA310-I/PT
✅ Прямая замена✓ В наличии
$4.85 / шт.
Открыть даташит →PIC24FJ256GA110-I/PT
✅ Прямая замена✓ В наличии
$5.61 / шт.
Открыть даташит →PIC24FJ64GA010-I/PF
✅ Прямая замена✓ В наличии
$5.1 / шт.
Открыть даташит →PIC24FJ64GA010-I/PT Максимальные параметры и электрические характеристики
| Core Architecture | PIC24F (16-bit modified Harvard) |
| Program Memory (Flash) | 64 KB (22K x 24 words) |
| Data RAM | 8 KB |
| Maximum CPU Speed | 16 MIPS @ 32 MHz |
| Internal Oscillator | 8 MHz with 4x PLL and divide options |
| Supply Voltage Range | 2.0 V to 3.6 V |
| Диапазон рабочих температур | -40 C to +85 C (industrial) |
| Digital I/O Pins | 84 |
| ADC | 10-bit, up to 16 channels |
| Timers | 5 x 16-bit |
| UART Modules | 2 |
| SPI Modules | 2 |
| I2C Modules | 2 |
| Parallel Master Port (PMP) | Yes (16-bit) |
| Real-Time Clock Calendar (RTCC) | Yes |
| Hardware Multiplier | 17-bit single-cycle |
| Hardware Divider | 16-bit |
| Корпус | 100-pin TQFP (PT), 12 x 12 mm |
| Тип монтажа | Surface Mount |
| Уровень MSL | 3 |
| Статус RoHS | Compliant |
| Lead-Free | Yes |
Конфигурация выводов PIC24FJ64GA010-I/PT
| Контакт 1 | RP15/RD15 — Remappable I/O or port D bit 15 |
| Контакт 2 | RP14/RD14 — Remappable I/O or port D bit 14 |
| Контакт 3 | RP13/RD13 — Remappable I/O or port D bit 13 |
| Контакт 4 | RP12/RD12 — Remappable I/O or port D bit 12 |
| Контакт 5 | RP11/RD11 — Remappable I/O or port D bit 11 |
| Контакт 6 | RP10/RD10 — Remappable I/O or port D bit 10 |
| Контакт 7 | RP9/RD9 — Remappable I/O or port D bit 9 |
| Контакт 8 | RP8/RD8 — Remappable I/O or port D bit 8 |
| Контакт 9 | RP7/RD7 — Remappable I/O or port D bit 7 |
| Контакт 10 | RP6/RD6 — Remappable I/O or port D bit 6 |
| Контакт 11 | VSS — Ground |
| Контакт 12 | VDD — Positive supply (2.0-3.6 V) |
| Контакт 13 | RP5/RD5 — Remappable I/O or port D bit 5 |
| Контакт 14 | RP4/RD4 — Remappable I/O or port D bit 4 |
| Контакт 15 | RP3/RD3 — Remappable I/O or port D bit 3 |
| Контакт 16 | RP2/RD2 — Remappable I/O or port D bit 2 |
| Контакт 17 | RP1/RD1 — Remappable I/O or port D bit 1 |
| Контакт 18 | RP0/RD0 — Remappable I/O or port D bit 0 |
| Контакт 19 | RE9/PMA0 — Port E bit 9 / PMP address 0 |
| Контакт 20 | RE8/PMA1 — Port E bit 8 / PMP address 1 |
| Контакт 21 | RA15/PMA2 — Port A bit 15 / PMP address 2 |
| Контакт 22 | RA14/PMA3 — Port A bit 14 / PMP address 3 |
| Контакт 23 | RA13/PMA4 — Port A bit 13 / PMP address 4 |
| Контакт 24 | RA12/PMA5 — Port A bit 12 / PMP address 5 |
| Контакт 25 | RA11/PMA6 — Port A bit 11 / PMP address 6 |
| Контакт 26 | RA10/PMA7 — Port A bit 10 / PMP address 7 |
| Контакт 27 | RA9/PMA8 — Port A bit 9 / PMP address 8 |
| Контакт 28 | VSS — Ground |
| Контакт 29 | VDD — Positive supply |
| Контакт 30 | OSC1/CLKI/RC15 — Crystal oscillator input |
| Контакт 31 | OSC2/CLKO/RC14 — Crystal oscillator output |
| Контакт 32 | RA8/PMA9 — Port A bit 8 / PMP address 9 |
| Контакт 33 | RA7/PMA10 — Port A bit 7 / PMP address 10 |
| Контакт 34 | RA6/PMA11 — Port A bit 6 / PMP address 11 |
| Контакт 35 | RA5/PMA12 — Port A bit 5 / PMP address 12 |
| Контакт 36 | RA4/PMA13 — Port A bit 4 / PMP address 13 |
| Контакт 37 | RA3/PMA14 — Port A bit 3 / PMP address 14 |
| Контакт 38 | RA2/PMA15 — Port A bit 2 / PMP address 15 |
| Контакт 39 | RA1/PMA16 — Port A bit 1 / PMP address 16 |
| Контакт 40 | RA0/PMA17 — Port A bit 0 / PMP address 17 |
| Контакт 41 | VSS — Ground |
| Контакт 42 | VDD — Positive supply |
| Контакт 43 | RE7/PMD7 — Port E bit 7 / PMP data 7 |
| Контакт 44 | RE6/PMD6 — Port E bit 6 / PMP data 6 |
| Контакт 45 | RE5/PMD5 — Port E bit 5 / PMP data 5 |
| Контакт 46 | RE4/PMD4 — Port E bit 4 / PMP data 4 |
| Контакт 47 | RE3/PMD3 — Port E bit 3 / PMP data 3 |
| Контакт 48 | RE2/PMD2 — Port E bit 2 / PMP data 2 |
| Контакт 49 | RE1/PMD1 — Port E bit 1 / PMP data 1 |
| Контакт 50 | RE0/PMD0 — Port E bit 0 / PMP data 0 |
| Контакт 51 | RG15 — Port G bit 15 |
| Контакт 52 | RG14 — Port G bit 14 |
| Контакт 53 | RG13 — Port G bit 13 |
| Контакт 54 | RG12 — Port G bit 12 |
| Контакт 55 | VSS — Ground |
| Контакт 56 | VDD — Positive supply |
| Контакт 57 | RG11 — Port G bit 11 |
| Контакт 58 | RG10 — Port G bit 10 |
| Контакт 59 | RG9 — Port G bit 9 |
| Контакт 60 | RG8 — Port G bit 8 |
| Контакт 61 | RG7 — Port G bit 7 |
| Контакт 62 | RG6 — Port G bit 6 |
| Контакт 63 | RG5 — Port G bit 5 |
| Контакт 64 | RG4 — Port G bit 4 |
| Контакт 65 | RG3 — Port G bit 3 |
| Контакт 66 | RG2 — Port G bit 2 |
| Контакт 67 | RG1 — Port G bit 1 |
| Контакт 68 | RG0 — Port G bit 0 |
| Контакт 69 | RF13 — Port F bit 13 |
| Контакт 70 | RF12 — Port F bit 12 |
| Контакт 71 | RF5 — Port F bit 5 |
| Контакт 72 | RF4 — Port F bit 4 |
| Контакт 73 | RF3 — Port F bit 3 |
| Контакт 74 | RF2 — Port F bit 2 |
| Контакт 75 | RF1 — Port F bit 1 |
| Контакт 76 | RF0 — Port F bit 0 |
| Контакт 77 | RF8 — Port F bit 8 |
| Контакт 78 | RF7 — Port F bit 7 |
| Контакт 79 | name |
| Контакт 80 | name |
| Контакт 81 | name |
| Контакт 82 | name |
| Контакт 83 | name |
| Контакт 84 | name |
| Контакт 85 | name |
| Контакт 86 | name |
| Контакт 87 | name |
| Контакт 88 | name |
| Контакт 89 | name |
| Контакт 90 | name |
| Контакт 91 | name |
| Контакт 92 | name |
| Контакт 93 | name |
| Контакт 94 | name |
| Контакт 95 | name |
| Контакт 96 | name |
| Контакт 97 | name |
| Контакт 98 | name |
| Контакт 99 | name |
| Контакт 100 | name |
Типичное применение
PIC24FJ64GA010-I/PT подходит для 6 применениеs: Human-Machine Interface (HMI) Panels, Industrial Sensor Data Acquisition, Battery-Powered Sensor Hubs, Portable Medical Devices, Appliance Control Boards, Educational / Hobby Development.
Human-Machine Interface (HMI) Panels
The PIC24FJ64GA010-I/PT's 84 I/O count plus the 16-bit Parallel Master Port (PMP) make it a strong fit for driving TFT LCDs and capacitive touch panels in industrial HMI terminals. With 64 KB Flash and 16 MIPS throughput, the device can hold a full emWin/Microchip-GUI application and a state machine for button debouncing. The two SPI modules allow simultaneous touch controller and external flash access; the I2C bus drives an external RTC and EEPROM. Engineers value the deterministic interrupt latency of the PIC24F core for responsive touch handling under GUI load.
Рекомендуется
Industrial Sensor Data Acquisition
The PIC24FJ64GA010-I/PT's 16-channel 10-bit ADC and 5 hardware 16-bit timers allow direct interface to multi-sensor industrial nodes (temperature, pressure, flow) without an external analog frontend. The 8 KB RAM is sufficient for circular buffering of oversampled data at modest rates, and the two UARTs bridge to RS-485 transceivers for Modbus RTU. The 2.0-3.6 V supply range matches 3.3 V industrial backplanes, and the -40C to +85C rating covers outdoor enclosures. The PMP can offload data to an external FRAM for black-box logging.
Рекомендуется
Battery-Powered Sensor Hubs
For battery-powered sensor hubs that need to wake periodically to read sensors and transmit over UART/BLE, the PIC24FJ64GA010-I/PT offers deep-sleep currents in the single-digit microampere range with the RTCC running, enabling multi-year coin-cell operation. The internal 8 MHz RC with 4x PLL eliminates an external crystal to save quiescent draw, and the flexible oscillator switching allows the MCU to run at 32 MHz active then drop to 31 kHz for sleep. The 64 KB Flash holds a Bluetooth Low Energy stack plus application code, and the 8 KB RAM is enough for sensor frame buffering.
Рекомендуется
Portable Medical Devices
The PIC24FJ64GA010-I/PT suits portable medical peripherals such as handheld pulse oximeters, glucose meters, and digital thermometers. Its low-power sleep modes extend battery life across many daily measurements, while the 10-bit ADC at 500 ksps handles photodiode or thermistor readouts. The RTCC timestamps each measurement, and the 84 I/O pins drive segmented LCDs directly. The PIC24F core's deterministic interrupt latency matters for the precise timing required by FDA/IEC 62368-style pulse-oximetry sampling algorithms.
Рекомендуется
Appliance Control Boards
White-goods control boards (washing machines, dishwashers, induction cooktops) are a strong fit for the PIC24FJ64GA010-I/PT thanks to its 84 I/O count, robust timer/capture modules for triac and IGBT control, and PMP for driving character or graphic LCDs. The 64 KB Flash supports full state-machine plus UI code, and the 5 16-bit timers handle triac zero-cross detection, motor PWM, and buzzer tones. The -40 to +85 C range covers under-cabinet and outdoor installations.
Рекомендуется
Educational / Hobby Development
The PIC24FJ64GA010-I/PT is supported by Microchip's Explorer 16/32 development board via a Processor Plug-In Module (PIM), making it a popular choice for university embedded courses and hobbyists moving up from PIC16. The 64 KB Flash is large enough for moderate RTOS builds (FreeRTOS port) and the 16 MIPS throughput is sufficient to teach real-time scheduling. The dual ICSP/PGECx/PGEDx pin pairs make in-circuit debugging straightforward with MPLAB X IDE and a PICkit 4.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC24FJ64GA010-I/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC24FJ128GA010-I/PT | PIC24FJ64GA010T-I/PT | PIC24FJ128GA310-I/PT | PIC24FJ256GA110-I/PT | PIC24FJ64GA010-I/PF |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (PT) | TQFP-100 (PT) | TQFP-100 (PT) | TQFP-100 (PT) | TQFP-100 (PT) | TQFP-100 (PF) |
| Flash Memory | 64 KB | 128 KB (+100%) | 64 KB (same) | 128 KB (+100%) | 256 KB (+300%) | 64 KB (same) |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB | 16 KB (+100%) | 8 KB |
| Maximum CPU Speed | 16 MIPS @ 32 MHz | 16 MIPS @ 32 MHz | 16 MIPS @ 32 MHz | 16 MIPS @ 32 MHz | 16 MIPS @ 32 MHz | 16 MIPS @ 32 MHz |
| I/O Pins | 84 | 84 | 84 | 84 | 85 | 84 |
| Supply Voltage | 2.0-3.6 V | 2.0-3.6 V | 2.0-3.6 V | 2.0-3.6 V | 2.0-3.6 V | 2.0-3.6 V |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Ключевые отличия
- Largest Flash in PIC24FJ GA0 64-KB tier without footprint change (против PIC24FJ64GA008-I/PT)
- Direct upgrade path to 128 KB Flash on same package (против PIC24FJ128GA010-I/PT)
- Wide operating voltage (2.0-3.6 V) supports 2xAA battery designs (против PIC24FJ256GA110-I/PT)
Заметки по проектированию
Place at least one 0.1 uF X7R ceramic decoupling capacitor within 5 mm of every VDD pin and a bulk 10 uF tantalum or ceramic capacitor at the board-level VDD rail. The PIC24FJ64GA010-I/PT has four VDD pins; missing one can cause brown-out resets during peak load events. Add a 1 uF cap on the AVDD pin if the ADC is enabled to avoid reference-induced noise on analog readings.
The 100-pin TQFP has a 0.4 mm pitch, so PCB layout requires 4 mil (0.1 mm) trace-and-space rules with microvia or sub-0.15 mm via-in-pad for dense escape routing. Route the crystal traces (OSC1/OSC2) as short as possible, guarded by a ground pour, and avoid running digital signals under them to prevent clock-jitter injection.
The PIC24FJ64GA010-I/PT has multiple PGECx/PGEDx pin pairs; the ICSP programmer (e.g. PICkit 4) must use a matched pair - if PGEC2 is used for ICSPCLK then PGED2 must be used for ICSPDAT, not a different pair. Mixing pairs prevents programming. Also ensure configuration bits (FOSC, FWDT, IESO) are set before the first instruction executes or the part may sit in reset with an unexpected oscillator configuration.
When using the Parallel Master Port (PMP) to drive a TFT display, keep PMP traces matched in length within 2 cm and add 22-33 ohm series damping resistors near the MCU to reduce overshoot. The PMP clock can run up to FOSC/2 (16 MHz), so an unterminated bus will ring and corrupt display data. Place the display connector close to the MCU to minimize stub length.
Информация о соответствии
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - choose PIC24FJ64GA010-I/PT for industrial/consumer only. For automotive, consult Microchip's dedicated automotive PIC24F line.