PIC24FV32KA302-E/SP - 32KB Flash 16-bit MCU, 32MHz, SPDIP-28 | Microchip
Артикул: PIC24FV32KA302-E/SP ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $5.62 | $5,62 |
| 10 | $5.18 | $51,80 |
| 100 | $4.62 | $462,00 |
| 500 | $4.05 | $2.025,00 |
| 1.000 | $3.45 | $3.450,00 |
PIC24FV32KA302-E/SP Обзор
A 16-bit microcontroller (MCU) is a programmable system-on-chip that combines a 16-bit CPU core, Flash program memory, SRAM data memory, and a rich peripheral set into a single integrated circuit. Within the broader semiconductor taxonomy, the PIC24F family sits between 8-bit PIC MCUs and 32-bit ARM Cortex-M parts, providing a migration path for applications that exceed 8-bit performance but do not require a 32-bit core. The PIC24FV32KA302-E/SP integrates peripherals that continue operating in Deep Sleep mode (DSBOR, DSWDT, RTCC), which is the defining feature of the XLP family.
Key features include 32KB (11K x 24) of self-programmable Flash, 2KB of SRAM, 512 bytes of EEPROM, 17 general-purpose I/O pins, and a 12-bit A/D converter with up to 16 channels. Communication peripherals include UART, SPI, and I2C interfaces, while advanced features include a 5-channel 16-bit timer, capture/compare/PWM modules, a Configurable Logic Cell (CLC), and a CTMU (Charge Time Measurement Unit) for capacitive touch sensing. The device supports 3.3V and 5V operation with nanoWatt XLP power management that achieves sub-uA sleep currents.
The PIC24FV32KA302-E/SP uses a Modified Harvard architecture with a 16-bit data path and 24-bit instruction word, enabling efficient C code execution via the MPLAB XC16 compiler. The integrated 8 MHz internal RC oscillator with PLL provides 32 MHz operation, eliminating the need for external crystals in cost-sensitive applications while maintaining USB-friendly timing accuracy.
Typical applications include battery-powered IoT nodes, portable medical devices, sensor interface modules, capacitive touch user interfaces, and industrial control systems that require extended temperature operation. The wide 2.0V-5.5V range makes the device directly compatible with both 3.3V and 5V system rails.
When designing with this part, populate the ICSP programming header on the PCB even for factory-programmed parts, as firmware revisions may require field updates. The AVDD/AVSS pair should be tied to the main VDD/VSS rails via a ferrite bead or short trace when high ADC accuracy is required. The 'E' temperature grade qualifies the part for -40C to +125C operation, suitable for industrial and outdoor enclosures.
This page synthesizes distributor pricing, same-family drop-in alternatives in the SPDIP-28 footprint, and practical design notes not consolidated in the manufacturer datasheet alone.
Аналоги без доработки для PIC24FV32KA302-E/SP — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC24FV32KA302-E/SP (тот же форм-фактор и посадочное место) — отличается по ADC, Package, EEPROM, Mounting Type, Operating Temperature.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC24FV32KA302-I/SP
✅ Прямая замена✓ В наличии
$3.42 / шт.
Открыть даташит →PIC24FV32KA302-E/SP Максимальные параметры и электрические характеристики
| Core | PIC24F 16-bit RISC, Modified Harvard architecture |
| Instruction Word | 24-bit |
| Data Path | 16-bit |
| Program Memory (Flash) | 32 KB (11K x 24) |
| RAM | 2 KB |
| EEPROM | 512 bytes |
| Maximum CPU Speed | 32 MHz |
| Operating Voltage Range | 2.0 V to 5.5 V |
| I/O Pins | 17 |
| ADC | 12-bit, up to 16 channels |
| Timers | 5 x 16-bit |
| Communication | UART, SPI, I2C |
| Special Features | CTMU, CLC, DSBOR, DSWDT, RTCC in Deep Sleep, ICSP |
| Oscillator | Internal 8 MHz RC with PLL |
| Рабочая температура | -40C to +125C (E grade) |
| Корпус | 28-pin SPDIP (0.300 inch / 7.62 mm row spacing) |
| Тип монтажа | Through-Hole |
| Статус RoHS | Compliant |
| XLP Family | Yes (Deep Sleep sub-uA) |
Конфигурация выводов PIC24FV32KA302-E/SP
| Контакт 1 | RA4 — Port A bit 4 / CTMU input |
| Контакт 2 | RA5 — Port A bit 5 / VREF+/CVREF+ |
| Контакт 3 | RA6 — Port A bit 6 / OSCI |
| Контакт 4 | RA7 — Port A bit 7 / OSCO |
| Контакт 5 | RC0 — Port C bit 0 / AN6 |
| Контакт 6 | RC1 — Port C bit 1 / AN7 |
| Контакт 7 | RC2 — Port C bit 2 / AN8 |
| Контакт 8 | RC3 — Port C bit 3 / AN9 |
| Контакт 9 | RC4 — Port C bit 4 / AN10 |
| Контакт 10 | RC5 — Port C bit 5 / AN11 |
| Контакт 11 | RB0 — Port B bit 0 / AN0 |
| Контакт 12 | VSS — Ground reference |
| Контакт 13 | VDD — Positive supply (2.0V to 5.5V) |
| Контакт 14 | RB1 — Port B bit 1 / AN1 |
| Контакт 15 | RB2 — Port B bit 2 / AN2 |
| Контакт 16 | RB3 — Port B bit 3 / AN3 |
| Контакт 17 | RB4 — Port B bit 4 / AN4 |
| Контакт 18 | RB5 — Port B bit 5 / AN5 |
| Контакт 19 | RB6 — Port B bit 6 / ICSPCLK |
| Контакт 20 | RB7 — Port B bit 7 / ICSPDAT |
| Контакт 21 | RA0 — Port A bit 0 / AN0 |
| Контакт 22 | RA1 — Port A bit 1 / AN1 |
| Контакт 23 | RA2 — Port A bit 2 / VREF- |
| Контакт 23 | RA2 — Port A bit 2 / VREF- (duplicate) |
| Контакт 24 | RA3 — Port A bit 3 / VPP/MCLR |
Типичное применение
PIC24FV32KA302-E/SP подходит для 6 применениеs: Battery-Powered IoT Sensor Node, Capacitive Touch User Interface, Portable Medical Monitoring Device, Industrial Sensor Interface Module, Smart Meter and Energy Monitoring, Automotive Auxiliary Controller.
Battery-Powered IoT Sensor Node
The PIC24FV32KA302-E/SP is well-suited for battery-powered IoT sensor nodes due to its XLP Deep Sleep current under 1 uA and 2.0V-5.5V wide-voltage operation from a single lithium or 2xAA battery. The 32KB Flash and 2KB RAM support typical sensor-fusion firmware including temperature/humidity/boundary acquisition, BLE driver code, and low-power protocol stacks (LoRaWAN, Zigbee, or proprietary Sub-GHz). The 17 GPIO easily accommodate I2C/SPI sensors, status LEDs, and wake-up interrupt sources. Power dissipation is minimized by entering Deep Sleep between transmissions while RTCC maintains a wake schedule. The 32 MHz core allows on-chip data compression before TX bursts, reducing radio on-time and extending battery life to years.
Рекомендуется
Capacitive Touch User Interface
The PIC24FV32KA302-E/SP integrates the CTMU peripheral which provides accurate charge-time measurement for capacitive touch sensing on up to 13 channels via the 17 GPIO. The 12-bit ADC enables proximity and slider gesture decoding without an external touch controller, reducing BOM cost. The wide 2.0V-5.5V supply tolerates noisy USB or battery rails common in appliance and consumer products. With 32 KB Flash, designers can host both capacitive-touch firmware and main product logic on a single chip, simplifying layouts in HMI panels, kitchen appliances, and industrial control keypads.
Рекомендуется
Portable Medical Monitoring Device
Medical wearables and portable monitors benefit from the PIC24FV32KA302-E/SP's extended -40C to +125C temperature grade, XLP nanoWatt power modes, and integrated 12-bit ADC for biosignal acquisition. The 32KB Flash stores small firmware stacks for pulse-oximetry, ECG pre-processing, or thermometry while 2KB RAM buffers sample data. The 5V tolerance protects against transients on body-coupled electrodes and battery chargers. The extended temperature grade supports storage at -40C (clinical refrigerators) and operation during fevers/elevated skin temperatures. CTMU supports touch-free proximity wake-up for clinician interaction.
Рекомендуется
Industrial Sensor Interface Module
The PIC24FV32KA302-E/SP is qualified for industrial automation with its -40C to +125C extended temperature range and 5V I/O tolerance for legacy sensor interfaces including 4-20 mA loops, 0-10V analog signals, and 24V digital inputs via external clamping. The 17 GPIO accommodate multiple sensor inputs, status LEDs, RS-485 transceivers, and isolated digital I/O. The CLC (Configurable Logic Cell) allows custom glue logic implementation directly on-chip, replacing external gates. Modbus RTU slave firmware fits easily in 32KB Flash, and the internal 8 MHz RC oscillator with PLL eliminates external crystals in cost-sensitive field installations.
Рекомендуется
Smart Meter and Energy Monitoring
Smart electricity meters and energy monitoring sub-systems leverage the PIC24FV32KA302-E/SP's 12-bit ADC for current/voltage sensing, EEPROM for non-volatile log storage (kWh readings survive power-down), and RTCC for time-of-use billing calculations. The 2.0V-5.5V range allows direct operation from a regulated DC bus or auxiliary supply. CTMQ can detect meter-tamper events via capacitance change, while the XLP Deep Sleep current keeps idle consumption below regulatory thresholds. The extended temperature grade supports -25C outdoor metering in cold climates and +55C inside distribution enclosures.
Рекомендуется
Automotive Auxiliary Controller
Body-of-system and aftermarket automotive electronics, including lighting controllers, HVAC panels, and seat-control units, can use the PIC24FV32KA302-E/SP for 5V-tolerant I/O interfacing with legacy 12V automotive rails via external transients/ESD protection. The -40C to +125C grade covers under-hood and cabin extremes from cold-start to summer sun exposure. CTMU supports touch-sensitive control surfaces, and the CLC implements custom logic without external gates. Note: This 'E' grade is industrial-extended, not full automotive-grade (AEC-Q100); for AEC-Q100, use the PIC24F32KA302-E/SP-Q variant or Microchip automotive PIC series.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC24FV32KA302-E/SP — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC24FV32KA302-I/SP | PIC24FV32KA302-E/SO |
|---|---|---|---|
| Package | 28-SPDIP (0.300 inch) | 28-SPDIP (same) | 28-SOIC (different package, not pin-compatible) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 32 KB | 32 KB | 32 KB |
| RAM | 2 KB | 2 KB | 2 KB |
| EEPROM | 512 B | 512 B | 512 B |
| Max CPU Speed | 32 MHz | 32 MHz | 32 MHz |
| Operating Voltage | 2.0V to 5.5V | 2.0V to 5.5V | 2.0V to 5.5V |
| I/O Pins | 17 | 17 | 17 |
| Operating Temperature | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +125C (E grade) |
| ADC | 12-bit, 16 channels | 12-bit, 16 channels | 12-bit, 16 channels |
Ключевые отличия
- Wide-voltage operation 2.0V-5.5V on the FV variant (против PIC24F (standard variant))
- Extended temperature grade for harsh environments (против PIC24FV32KA302-I/SP)
- CTMU peripheral for capacitive touch without external IC (против Discrete touch controller (AT42QT1010))
Заметки по проектированию
The XLP Deep Sleep current can drop below 1 uA when properly configured: disable all unused peripherals via PMD registers, set all unused GPIO as outputs driving low, and use RTCC alarm to wake. Estimated: at 3.3V with everything off and only RTCC active, expect ~800 nA. Use the datasheet Figure 31-15 ('Deep Sleep Current vs. Temperature') to verify against temperature extremes, since leakage rises at +85C and above.
Place a 100 nF decoupling capacitor within 3 mm of each VDD pin (pins 13 and 28 of the SPDIP-28), and a bulk 10 uF tantalum or ceramic cap on the same supply rail. The AVDD/AVSS pair (or shared VDD/VSS in this part) should be tied directly without ferrite beads for general applications; insert a ferrite only when ADC noise exceeds 1 LSB. ICSP header (RB6/RB7) should be brought out to a 6-pin header for in-circuit programming and debugging, even on factory-programmed parts.
Do not confuse the PIC24FV (wide voltage 2.0V-5.5V) with the PIC24F (1.8V-3.6V only); using the wrong variant at 5V will damage the part. The 'E' suffix indicates -40C to +125C extended grade; do not substitute with 'I' grade (-40C to +85C) for outdoor or industrial deployments. Pin 24 (MCLR/VPP) must be tied to VDD via a 10 kΩ pull-up for normal operation; leaving it floating prevents code execution. The configuration bits must be set correctly for the internal oscillator and PGx pins; defaults may not match your schematic.
Информация о соответствии
RoHS and lead-free compliant per Microchip product page. 'E' grade is extended industrial (-40C to +125C), not AEC-Q100 automotive qualified. For AEC-Q100, use the Microchip automotive PIC24 family variants.
