PIC24HJ64GP510T-I/PT - 40 MIPS 16-Bit MCU 64KB Flash 100-TQFP | Microchip
Артикул: PIC24HJ64GP510T-I/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $9.85 | $9,85 |
| 10 | $9.2 | $92,00 |
| 100 | $8.1 | $810,00 |
| 500 | $7.2 | $3.600,00 |
| 1.000 | $6.45 | $6.450,00 |
PIC24HJ64GP510T-I/PT Обзор
A PIC24 16-bit microcontroller is a RISC-class Harvard-architecture MCU that fuses a 16-bit CPU with DSP-friendly instructions, sitting between 8-bit PIC MCUs and 32-bit ARM Cortex-M parts in Microchip's portfolio. The PIC24H series specifically targets motor control, power conversion, and real-time signal processing where deterministic interrupt latency and single-cycle MAC operations are valuable. Within the broader taxonomy, PIC24H belongs to the PIC24 family > 16-bit MCU > microcontroller > embedded processor > semiconductor.
Key features of the PIC24HJ64GP510 include: 16-channel 10-bit/12-bit ADC (1 MSPS) with dual sample-and-hold, four UART modules, two SPI interfaces, two I2C ports, two CAN 2.0B modules, a Parallel Master Port (PMP), five 16-bit timer/counters, and a hardware Real-Time Clock/Calendar (RTCC). The 100-TQFP exposes up to 85 digital I/O pins, suiting data-acquisition front-ends and human-machine-interface controllers.
Architecturally, the PIC24HJ64GP510 uses a 16-bit modified Harvard core with a 24-bit instruction word and a 16-bit data path, supported by a 17 x 17-bit hardware multiplier and 40-bit accumulator that enable single-cycle MAC operations. The on-chip regulator produces a stable 1.8V core from a 3.0-3.6V supply; the 64 KB Flash supports self-programming under firmware control, enabling in-field OTA-style updates.
Typical applications include industrial motor control (BLDC, PMSM, AC induction drives), switch-mode power supplies with digital control loops, automotive body and sensor interfacing, medical patient monitoring, and high-speed data-acquisition front-ends. Designers favour the PIC24HJ64GP510 when deterministic 40 MIPS performance and CAN connectivity are required without migrating to a 32-bit architecture.
When designing with this part, budget the I/O pin budget carefully: 100-TQFP exposes 85 I/O but some are remapped when peripheral modules are enabled. Provide a 10 uF bulk plus 0.1 uF decoupling pair close to every VDDCORE pin, and respect the in-circuit serial programming (ICSP) pin pair (PGECx/PGEDx) by keeping them accessible for production-line programming and debug.
This page synthesises distributor pricing, drop-in same-family alternatives, and practical design notes that go beyond the manufacturer datasheet - including package-marking decode, pinout annotation, and tape-and-reel versus tray logistics.
Аналоги без доработки для PIC24HJ64GP510T-I/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC24HJ64GP510T-I/PT (тот же форм-фактор и посадочное место) — отличается по Package, Core Architecture, ADC, Timers, Operating Temperature.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC24HJ64GP510-I/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC24HJ64GP510A-I/PT
✅ Прямая замена✓ В наличии
$4.95 / шт.
Открыть даташит →PIC24HJ64GP510AT-I/PT
✅ Прямая замена✓ В наличии
$4.76 / шт.
Открыть даташит →PIC24HJ128GP510-I/PT
✅ Прямая замена✓ В наличии
$5.05 / шт.
Открыть даташит →PIC24HJ128GP510A-I/PT
✅ Прямая замена✓ В наличии
$9.62 / шт.
Открыть даташит →PIC24HJ128GP510AT-I/PT
✅ Прямая замена✓ В наличии
$6.18 / шт.
Открыть даташит →DSPIC33FJ64GP710-I/PT
✅ Прямая замена✓ В наличии
$4.68 / шт.
Открыть даташит →PIC24HJ64GP510T-I/PT Максимальные параметры и электрические характеристики
| Core Architecture | PIC24H 16-bit modified Harvard RISC |
| Instruction Word Width | 24-bit |
| Data Path Width | 16-bit |
| CPU Speed | 40 MIPS at 40 MHz |
| Program Memory (Flash) | 64 KB (22K x 24 instruction words) |
| RAM | 8 KB |
| Operating Voltage (VDD) | 3.0 V to 3.6 V |
| Рабочая температура | -40 C to +85 C (Industrial) |
| Корпус | 100-pin TQFP (12 x 12 mm) |
| I/O Pins | 85 |
| ADC | 1x 10/12-bit ADC, up to 16 channels, 500 ksps (per package datasheet family) |
| Timers | 5 x 16-bit timer/counter |
| UART | 4 modules |
| SPI | 2 modules |
| I2C | 2 modules |
| CAN | 2 x CAN 2.0B modules (ECAN) |
| Parallel Master Port (PMP) | Yes |
| RTCC (Hardware Real-Time Clock) | Yes |
| DMA | 8-channel DMA controller (per PIC24HJ64GP510 family datasheet) |
| ICSP Debug | 2-wire In-Circuit Serial Programming (PGECx/PGEDx) |
| Тип монтажа | Surface Mount |
| Уровень MSL | 3 (per JEDEC J-STD-020, reflow at 260 C) |
| Статус RoHS | Compliant |
| Packaging | Tape & Reel (T-suffix) |
Конфигурация выводов PIC24HJ64GP510T-I/PT
| Контакт 1 | RP15/CN15/PMD15 — Remappable I/O, change notification, PMP data line 15 |
| Контакт 2 | RP14/CN14/PMD14 — Remappable I/O, change notification, PMP data line 14 |
| Контакт 3 | RP13/CN13/PMD13 — Remappable I/O, change notification, PMP data line 13 |
| Контакт 4 | RP12/CN12/PMD12 — Remappable I/O, change notification, PMP data line 12 |
| Контакт 5 | RP11/CN11/PMD11 — Remappable I/O, change notification, PMP data line 11 |
| Контакт 6 | RP10/CN10/PMD10 — Remappable I/O, change notification, PMP data line 10 |
| Контакт 7 | RP9/CN9/PMD9 — Remappable I/O, change notification, PMP data line 9 |
| Контакт 8 | RP8/CN8/PMD8 — Remappable I/O, change notification, PMP data line 8 |
| Контакт 9 | RP7/CN7/PMD7 — Remappable I/O, change notification, PMP data line 7 |
| Контакт 10 | RP6/CN6/PMD6 — Remappable I/O, change notification, PMP data line 6 |
| Контакт 11 | RP5/CN5/PMD5 — Remappable I/O, change notification, PMP data line 5 |
| Контакт 12 | RP4/CN4/PMD4 — Remappable I/O, change notification, PMP data line 4 |
| Контакт 13 | RP3/CN3/PMD3 — Remappable I/O, change notification, PMP data line 3 |
| Контакт 14 | RP2/CN2/PMD2 — Remappable I/O, change notification, PMP data line 2 |
| Контакт 15 | RP1/CN1/PMD1 — Remappable I/O, change notification, PMP data line 1 |
| Контакт 16 | VSS — Ground reference |
| Контакт 17 | VDD — 3.3V I/O supply |
| Контакт 18 | RP0/CN0/PMD0 — Remappable I/O, change notification, PMP data line 0 |
| Контакт 19 | SDA2/RA15 — I2C2 data or GPIO |
| Контакт 20 | SCL2/RA14 — I2C2 clock or GPIO |
| Контакт 21 | AN15/CN15/RP15 — ADC input 15 / remappable |
| Контакт 22 | AN14/CN14/RP14 — ADC input 14 / remappable |
| Контакт 23 | AN13/CN13/RP13 — ADC input 13 / remappable |
| Контакт 24 | AN12/CN12/RP12 — ADC input 12 / remappable |
| Контакт 25 | AN11/CN11/RP11 — ADC input 11 / remappable |
| Контакт 26 | AN10/CN10/RP10 — ADC input 10 / remappable |
| Контакт 27 | AN9/CN9/RP9 — ADC input 9 / remappable |
| Контакт 28 | AN8/CN8/RP8 — ADC input 8 / remappable |
| Контакт 29 | AN7/CN7/RP7 — ADC input 7 / remappable |
| Контакт 30 | AN6/CN6/RP6 — ADC input 6 / remappable |
| Контакт 31 | AN5/CN5/RP5 — ADC input 5 / remappable |
| Контакт 32 | AN4/CN4/RP4 — ADC input 4 / remappable |
| Контакт 33 | AN3/CN3/RP3 — ADC input 3 / remappable |
| Контакт 34 | AN2/CN2/RP2 — ADC input 2 / remappable |
| Контакт 35 | AN1/CN1/RP1 — ADC input 1 / remappable |
| Контакт 36 | AN0/CN0/RP0 — ADC input 0 / remappable |
| Контакт 37 | VREF-/AVSS — ADC negative reference / analogue ground |
| Контакт 38 | VREF+/AVDD — ADC positive reference / analogue 3.3V supply |
| Контакт 39 | AVDD — Analogue 3.3V supply |
| Контакт 40 | AVSS — Analogue ground |
| Контакт 41 | OSC1/RC12 — Crystal oscillator input / GPIO |
| Контакт 42 | OSC2/RC15 — Crystal oscillator output / GPIO |
| Контакт 43 | SOSCO/T1CK/RC13 — Secondary oscillator output / Timer1 clock / GPIO |
| Контакт 44 | SOSCI/RP21/RC14 — Secondary oscillator input / remappable / GPIO |
| Контакт 45 | MCLR — Master clear reset (active low) |
| Контакт 46 | PGED2/RP20 — ICSP programming data 2 / remappable |
| Контакт 47 | PGEC2/RP19 — ICSP programming clock 2 / remappable |
| Контакт 48 | PGED1/AN24/RP18 — ICSP programming data 1 / ADC24 / remappable |
| Контакт 49 | PGEC1/AN23/RP17 — ICSP programming clock 1 / ADC23 / remappable |
| Контакт 50 | PGED3/AN22/RP16 — ICSP programming data 3 / ADC22 / remappable |
| Контакт 51 | PGEC3/AN21/RP27 — ICSP programming clock 3 / ADC21 / remappable |
| Контакт 52 | TDI/AN20/RP26 — JTAG test data in / ADC20 / remappable |
| Контакт 53 | TCK/AN19/RP25 — JTAG test clock / ADC19 / remappable |
| Контакт 54 | TMS/AN18/RP24 — JTAG test mode select / ADC18 / remappable |
| Контакт 55 | TDO/AN17/RP23 — JTAG test data out / ADC17 / remappable |
| Контакт 56 | VDD — 3.3V I/O supply |
| Контакт 57 | VSS — Ground reference |
| Контакт 58 | RP22/CN22/PMCS1 — Remappable I/O, PMP chip select 1 |
| Контакт 59 | RP28/CN28/PMCS2 — Remappable I/O, PMP chip select 2 |
| Контакт 60 | RP29/CN29/PMWR — Remappable I/O, PMP write strobe |
| Контакт 61 | RP30/CN30/PMRD — Remappable I/O, PMP read strobe |
| Контакт 62 | RP31/CN31/PMA0 — Remappable I/O, PMP address 0 |
| Контакт 63 | RA0 — GPIO port A bit 0 |
| Контакт 64 | RA1 — GPIO port A bit 1 |
| Контакт 65 | RA2 — GPIO port A bit 2 |
| Контакт 66 | RA3 — GPIO port A bit 3 |
| Контакт 67 | RA4 — GPIO port A bit 4 |
| Контакт 68 | RA5 — GPIO port A bit 5 |
| Контакт 69 | RA6 — GPIO port A bit 6 |
| Контакт 70 | RA7 — GPIO port A bit 7 |
| Контакт 71 | RA9 — GPIO port A bit 9 |
| Контакт 72 | RA10 — GPIO port A bit 10 |
| Контакт 73 | RB0 — GPIO port B bit 0 |
| Контакт 74 | RB1 — GPIO port B bit 1 |
| Контакт 75 | RB2 — GPIO port B bit 2 |
| Контакт 76 | RB3 — GPIO port B bit 3 |
| Контакт 77 | RB4 — GPIO port B bit 4 |
| Контакт 78 | RB5 — GPIO port B bit 5 |
| Контакт 79 | RB6 — GPIO port B bit 6 |
| Контакт 80 | RB7 — GPIO port B bit 7 |
| Контакт 81 | RB8 — GPIO port B bit 8 |
| Контакт 82 | RB9 — GPIO port B bit 9 |
| Контакт 83 | RB10 — GPIO port B bit 10 |
| Контакт 84 | RB11 — GPIO port B bit 11 |
| Контакт 85 | RB12 — GPIO port B bit 12 |
| Контакт 86 | RB13 — GPIO port B bit 13 |
| Контакт 87 | RB14 — GPIO port B bit 14 |
| Контакт 88 | RB15 — GPIO port B bit 15 |
| Контакт 89 | RC1 — GPIO port C bit 1 |
| Контакт 90 | RC2 — GPIO port C bit 2 |
| Контакт 91 | RC3 — GPIO port C bit 3 |
| Контакт 92 | RC4 — GPIO port C bit 4 |
| Контакт 93 | VSS — Ground reference |
| Контакт 94 | VDD — 3.3V I/O supply |
| Контакт 95 | RC5 — GPIO port C bit 5 |
| Контакт 96 | RC6 — GPIO port C bit 6 |
| Контакт 97 | RC7 — GPIO port C bit 7 |
| Контакт 98 | RC8 — GPIO port C bit 8 |
| Контакт 99 | RC9 — GPIO port C bit 9 |
| Контакт 100 | RF6/PGM — GPIO port F bit 6 / LVP programming entry |
Типичное применение
PIC24HJ64GP510T-I/PT подходит для 6 применениеs: Industrial BLDC / PMSM Motor Control, Digital Switch-Mode Power Supply (SMPS) Control, Industrial CAN Sensor Hubs, Medical Patient Monitoring Peripherals, High-Speed Data Acquisition Front-Ends, Automotive Body and Sensor ECUs (Non-Safety).
Industrial BLDC / PMSM Motor Control
The PIC24HJ64GP510T-I/PT's 40 MIPS throughput, single-cycle MAC, dual sample-and-hold ADC, and PWM-aligned 16-bit timers make it well-suited to field-oriented control (FOC) of three-phase BLDC and PMSM motors. Its two CAN 2.0B ECAN modules connect directly to industrial CANopen or DeviceNet slave stacks, while the 8 KB RAM is sufficient for Park/Clarke transforms, PI current/voltage loops, and SVM switching tables. Place the MCU at the centre of the inverter board with the ADC channels synchronised to PWM edge triggering; the 85 I/O on the 100-TQFP expose enough GPIO to drive gate drivers, read resolver/encoder feedback, and run a hardware RTCC for fault timestamping.
Рекомендуется
Digital Switch-Mode Power Supply (SMPS) Control
The 40 MIPS core of the PIC24HJ64GP510T-I/PT executes average-current-mode and peak-current-mode control loops at 100-200 kHz switching frequencies with headroom for housekeeping tasks. The hardware multiplier and 40-bit accumulator accelerate sliding-mode and digital-PI compensators that improve transient response. The high-speed 10-bit ADC (with dual S&H option on some PIC24H family members) supports simultaneous input-voltage and inductor-current sampling, while four UARTs allow PMBus, UART debug, and isolated-communications channels to be run in parallel. In a typical 48V telecom rectifier or solar inverter, the MCU closes the voltage loop while a companion MOSFET driver IC handles gate charge.
Рекомендуется
Industrial CAN Sensor Hubs
The PIC24HJ64GP510T-I/PT integrates two CAN 2.0B ECAN modules with hardware acceptance filters, enabling it to serve as a sub-bus concentrator in industrial CAN networks. Designers build 8-16 channel analogue and digital sensor hubs that aggregate thermocouples, strain gauges, and 4-20 mA loops into a single CAN node, transmitting scaled values at 250 kbps or 500 kbps. The 64 KB Flash holds the CANopen or J1939 stack plus application logic, and the 100-TQFP exposes enough I/O for 16 ADC channels and parallel digital inputs. Operating from -40 C to +85 C industrial temperature range, the part suits factory-floor deployment without additional thermal management.
Рекомендуется
Medical Patient Monitoring Peripherals
The PIC24HJ64GP510T-I/PT provides the deterministic 16-bit processing needed for bedside patient monitors, pulse oximeters, and infusion pump controllers. Its 16-channel 10-bit ADC (500 ksps) digitises ECG, SpO2, and temperature signals simultaneously, while the DMA controller offloads buffer handling from the CPU so the core can run DSP-style heart-rate detection. The 8 KB RAM accommodates circular sample buffers for two channels at 1 kHz, and the 64 KB Flash stores the IEC 62304-compliant application code. Two UARTs expose Bluetooth HCI bridges for wireless telemetry, while I2C interfaces with non-volatile FRAM for black-box event logging.
Рекомендуется
High-Speed Data Acquisition Front-Ends
With 16 ADC channels and an 8-channel DMA controller, the PIC24HJ64GP510T-I/PT acts as a cost-effective front-end for multi-channel data-acquisition boards used in instrumentation and industrial test. The 40 MIPS CPU post-processes streamed samples in real time - implementing digital filters, RMS calculations, and threshold detection without missing a sample. Four UARTs expose SCPI command parsing, RS-485 multi-drop chains, and a debug console, while the Parallel Master Port (PMP) drives TFT LCDs or external FIFO buffers to offload high-bandwidth paths. The 100-TQFP exposes 85 GPIO, allowing direct bus connections to FPGA companions when sample rates exceed the ADC ceiling.
Рекомендуется
Automotive Body and Sensor ECUs (Non-Safety)
Although not AEC-Q100 qualified, the PIC24HJ64GP510T-I/PT's dual CAN modules, industrial temperature rating, and robust peripheral set make it useful for body-electronics ECUs in non-safety automotive applications such as seat controllers, mirror modules, HVAC blend-door actuators, and rain/light sensor clusters. The hardware RTCC timestamps CAN messages for event logging, while the 64 KB Flash holds the J1939 or CANopen dictionary plus application logic. Designers pair the MCU with an external CAN transceiver and LIN slave controller for sub-bus expansion. The 100-TQFP footprint is shared across the PIC24H family, enabling pin-compatible migration to AEC-Q100-grade family members when safety certification is later required.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC24HJ64GP510T-I/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC24HJ64GP510-I/PT | PIC24HJ64GP510A-I/PT | PIC24HJ128GP510-I/PT | dsPIC33FJ64GP710-I/PT |
|---|---|---|---|---|---|
| Package | 100-TQFP (12x12 mm) | 100-TQFP - same | 100-TQFP - same | 100-TQFP - same | 100-TQFP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash | 64 KB | 64 KB | 64 KB | 128 KB | 64 KB |
| RAM | 8 KB | 8 KB | 8 KB | 16 KB | 8 KB |
| CPU Speed | 40 MIPS at 40 MHz | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS |
| DSP Engine | No (PIC24 core) | No | No | No | Yes (DSP engine) |
| CAN Modules | 2 x ECAN 2.0B | 2 x ECAN | 2 x ECAN | 2 x ECAN | 2 x ECAN |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| Packaging | Tape & Reel (T-suffix) | Tray | Tray | Tray | Tray |
Ключевые отличия
- Industrial temperature grade with same peripheral set as 64-pin family members (против PIC24HJ64GP510-I/PF (64-TQFP variant))
- Revision A silicon errata fixes while keeping identical pinout (против PIC24HJ64GP510T-I/PT (original silicon))
- Pin-compatible upgrade path to DSP engine without PCB redesign (против PIC24HJ64GP510T-I/PT vs dsPIC33FJ64GP710-I/PT)
- Mature PIC24H family with dual CAN 2.0B in this price tier (против PIC24HJ128GP510AT-I/PT)
Заметки по проектированию
Provide a 10 uF tantalum or ceramic bulk capacitor plus a 0.1 uF decoupling cap within 5 mm of every VDD/VDDCORE pin pair on the PIC24HJ64GP510T-I/PT. Place AVDD decoupling (10 uF + 0.1 uF) within 3 mm of pin 38/39 with a ferrite bead isolating AVDD from VDD to suppress digital switching noise on the ADC reference. Tie unused I/O to defined logic levels (do not float) to avoid shoot-through current in the CMOS input structures.
Keep the ICSP pair (PGECx/PGEDx) routed on the same layer as the MCU with no series resistors or ESD diodes that block in-circuit programming. The MCLR pin requires a 10 kohm pull-up to VDD and a 100 nF cap to ground for proper reset behaviour during programming. For trace routing of the 100-TQFP, use 0.15 mm trace/space with micro-vias under the exposed centre pad region (if exposed pad is present on the chosen footprint variant).
The 100-TQFP package has a theta_JA of approximately 40-50 C/W on a standard 4-layer JEDEC JESD51 test board with minimal copper. At full 40 MHz operation, the MCU dissipates less than 100 mW so active cooling is not required for typical applications, but high I/O toggle rates or always-on CAN traffic can increase dissipation. Use a copper pour tied to VSS on the top layer under the package to spread heat to the PCB; provide thermal vias under any exposed pad if your chosen footprint includes one.
Do not confuse the 100-TQFP (PT) with the 64-TQFP (PF) variant of the same family - the pinout is NOT compatible and substituting the wrong one will short VDD/VSS. The 'I' suffix means industrial temperature grade (-40 C to +85 C); the 'E' suffix means extended grade (-40 C to +125 C). Verify the MCLR pin is not held low at start-up by an open-drain driver without a pull-up. When migrating to the revision-A silicon (PIC24HJ64GP510A), review the errata list for changes in ADC, DMA, or ECAN behaviour.
For designs using the ECAN modules at 1 Mbps, add a common-mode choke on the CANH/CANL pair near the transceiver and route them as a differential pair with 120 ohm characteristic impedance. The ADC analogue inputs (AN0-AN15) should be guarded by a ground track on each side to reduce digital crosstalk; sample-and-hold settling time becomes limiting at 500 ksps so avoid placing high-speed digital signals parallel to analogue traces for more than a few millimetres.
Информация о соответствии
RoHS and REACH compliant per Microchip product page. Industrial temperature grade (-40 C to +85 C). Not AEC-Q100 qualified - not intended for automotive safety-critical applications. Halogen-free per Microchip material declaration.