PIC32MX120F032BT-V/SS - 32-bit MCU 32KB Flash 40MHz | Microchip
Артикул: PIC32MX120F032BT-V/SS ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $3.2 | $3,20 |
| 10 | $2.94 | $29,40 |
| 100 | $2.46 | $246,00 |
| 500 | $2.18 | $1.090,00 |
| 1.000 | $1.95 | $1.950,00 |
PIC32MX120F032BT-V/SS Обзор
A 32-bit microcontroller (MCU) is a microprocessor core with on-chip memory, peripherals, and interrupt logic on a single die. It sits within the embedded computing hierarchy: microcontroller -> embedded processor -> semiconductor. PIC32 devices specifically implement the MIPS32 M4K instruction set, enabling execution of code written for the MIPS architecture while integrating Microchip's peripheral ecosystem. Compared with 8-bit/16-bit MCUs, 32-bit parts like the PIC32MX1XX family provide higher MIPS-per-mHz, larger linear address space, and richer DSP-friendly arithmetic.
The PIC32MX120F032BT-V/SS runs from a 2.3V to 3.6V supply, drawing under 0.5 mA/MHz active, with multiple low-power modes (Sleep, Idle, Deep-Sleep). The -V suffix designates the -40C to +105C extended temperature range suited to industrial and automotive under-hood environments. Boundary scan (JTAG) and trace support simplify in-system debug and test, while on-chip PLLs separate CPU and USB clocking domains.
With 32KB Flash and 8KB SRAM, the M4K core delivers roughly 52 DMIPS at 40MHz, enabling real-time control loops, USB device/host stacks, and small graphical interfaces via PMP. Hardware DMA offloads data movement between peripherals and memory, freeing the core for application logic. The CTMU enables mTouch capacitive touch buttons/sliders without an external touch controller.
Typical applications include automotive body and climate modules, capacitive touch human-machine interfaces (HMI), low-cost USB peripherals, sensor hubs with I2S audio, and small graphical displays driven through PMP. Designers choose this part when they need 32-bit headroom with Microchip's MPLAB X toolchain, MSSP-style peripherals, and automotive-grade temperature tolerance in a compact 28-pin SSOP footprint.
When designing, ensure decoupling per Microchip's recommended layout - 0.1 uF ceramic near each power pin plus a bulk 10 uF tantalum or ceramic. The CTMU current source requires calibration for accurate touch measurements, and unused pins should be configured as outputs low to minimize quiescent current.
This page synthesizes verified distributor pricing, automotive-temperature drop-in alternatives within the PIC32MX1XX family, and practical design notes that go beyond the manufacturer datasheet summary.
Аналоги без доработки для PIC32MX120F032BT-V/SS — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC32MX120F032BT-V/SS (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature Range, DMA Channels, Program Memory (Flash), ADC.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC32MX120F032BT-I/SS
✅ Прямая замена✓ В наличии
$2.18 / шт.
Открыть даташит →PIC32MX120F032BT-50V/SS
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MX120F032B-V/SS
✅ Прямая замена✓ В наличии
$3.32 / шт.
Открыть даташит →PIC32MX120F032B-I/SS
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MX110F016BT-V/SS
✅ Прямая замена✓ В наличии
$1.68 / шт.
Открыть даташит →PIC32MX120F032BT-V/SS Максимальные параметры и электрические характеристики
| Core Architecture | MIPS32 M4K |
| Core Count | Single-Core |
| Разрядность шины данных | 32-bit |
| Maximum CPU Clock | 40 MHz |
| Program Memory (Flash) | 32 KB (32K x 8) |
| SRAM | 8 KB |
| Operating Voltage Range | 2.3 V to 3.6 V |
| Active Current | < 0.5 mA/MHz |
| I/O Pins | 21 |
| ADC | 10-bit |
| I2S/SPI Modules | 2 |
| UART Modules | 2 |
| I2C Modules | 2 |
| DMA Channels | Up to 4 |
| Диапазон рабочих температур | -40C to +105C (V grade) |
| Корпус | 28-pin SSOP (JESD-30 Code: R-PDSO-G28), 0.65 mm pitch |
| Тип монтажа | Surface Mount |
| Peripheral Pin Select (PPS) | Yes |
| Parallel Master Port (PMP) | Yes |
| CTMU (mTouch) | Yes |
| Boundary Scan (JTAG) | Yes |
| Статус RoHS | Compliant |
Конфигурация выводов PIC32MX120F032BT-V/SS
| Контакт 1 | MCLR — Master Clear (reset) input, active low |
| Контакт 2 | RA0 — Port A bit 0 (PPS-capable) |
| Контакт 3 | RA1 — Port A bit 1 (PPS-capable) |
| Контакт 4 | RB0 — Port B bit 0 (PPS-capable) |
| Контакт 5 | RB1 — Port B bit 1 (PPS-capable) |
| Контакт 6 | RB2 — Port B bit 2 (PPS-capable) |
| Контакт 7 | RB3 — Port B bit 3 (PPS-capable) |
| Контакт 8 | VSS — Ground reference |
| Контакт 9 | OSC1 — Crystal oscillator input or external clock input |
| Контакт 10 | OSC2 — Crystal oscillator output |
| Контакт 11 | RB4 — Port B bit 4 (PPS-capable) |
| Контакт 12 | RB5 — Port B bit 5 (PPS-capable) |
| Контакт 13 | RB6 — Port B bit 6 (PPS-capable, ICDPGEC2/PGEC2) |
| Контакт 14 | RB7 — Port B bit 7 (PPS-capable, ICDPGED2/PGED2) |
| Контакт 15 | AVSS — Analog ground reference |
| Контакт 16 | AVDD — Analog positive supply (2.3V-3.6V) |
| Контакт 17 | RB8 — Port B bit 8 (PPS-capable) |
| Контакт 18 | RB9 — Port B bit 9 (PPS-capable) |
| Контакт 19 | RB10 — Port B bit 10 (PPS-capable) |
| Контакт 20 | RB11 — Port B bit 11 (PPS-capable) |
| Контакт 21 | VDD — Digital positive supply (2.3V-3.6V) |
| Контакт 22 | RB12 — Port B bit 12 (PPS-capable) |
| Контакт 23 | RB13 — Port B bit 13 (PPS-capable) |
| Контакт 24 | RB14 — Port B bit 14 (PPS-capable) |
| Контакт 25 | RB15 — Port B bit 15 (PPS-capable) |
| Контакт 26 | RA2 — Port A bit 2 (PPS-capable) |
| Контакт 27 | RA3 — Port A bit 3 (PPS-capable) |
| Контакт 28 | RA4 — Port A bit 4 (PPS-capable) |
Типичное применение
PIC32MX120F032BT-V/SS подходит для 6 применениеs: Automotive Body and Climate Modules, Capacitive Touch HMI (mTouch), USB Device Peripherals (Lower-Volume, Non-USB Variants), Sensor Hubs and Data Loggers, Small Graphical Displays via PMP, Industrial Control and Factory Automation Nodes.
Automotive Body and Climate Modules
The PIC32MX120F032BT-V/SS fits automotive body and climate modules through its -40C to +105C V grade operating range, 32-bit MIPS32 M4K core at 40 MHz for real-time control of HVAC actuators and body controllers, and 21 GPIO pins for interfacing with motors, sensors, and LIN/CAN transceivers. The 32 KB Flash accommodates small RTOS-based HVAC firmware with diagnostic handlers and the 8 KB SRAM provides stack and buffer headroom for CAN/LIN message queues. Boundary-scan JTAG enables production test access while PWM outputs drive brushless DC fans and stepper motor controllers for air distribution.
Рекомендуется
Capacitive Touch HMI (mTouch)
The PIC32MX120F032BT-V/SS supports capacitive touch human-machine interfaces via its integrated Charge Time Measurement Unit (CTMU) without requiring an external touch controller. The CTMU provides a precision current source that, combined with the 10-bit ADC, measures capacitance change on touch pads. The 40 MHz M4K core runs Microchip's mTouch libraries to scan 8-16 buttons and slider/wheel geometries in real time, while the 28-SSOP package fits small appliance and industrial front panels. The -V temperature grade ensures touch reliability across automotive and industrial operating environments.
Рекомендуется
USB Device Peripherals (Lower-Volume, Non-USB Variants)
Although the PIC32MX120F032BT-V/SS lacks the on-chip USB module found in PIC32MX2XX siblings, it pairs naturally with an external USB-to-UART or USB-to-SPI bridge IC to implement low-cost USB peripherals. The two UART modules and two I2S/SPI modules provide flexible host-side connectivity, while the 32 KB Flash holds CDC/HID class drivers and application logic. The 28-SSOP footprint suits compact dongle and cable-end enclosures, and the -V temperature grade supports industrial USB accessory deployments in harsh environments.
Рекомендуется
Sensor Hubs and Data Loggers
The PIC32MX120F032BT-V/SS works well as a multi-sensor hub with its two I2C and two UART channels, plus the 10-bit ADC for direct analog sensor reads. The hardware DMA offloads sensor data streams from the M4K core, freeing cycles for local filtering, thresholding, and SD-card or EEPROM logging. The 32 KB Flash stores edge-AI-style pre-processing logic and the 8 KB SRAM buffers burst sensor data before offload. Boundary scan support aids factory calibration of analog channels.
Рекомендуется
Small Graphical Displays via PMP
The PIC32MX120F032BT-V/SS drives small parallel-bus LCDs through the integrated Parallel Master Port (PMP), enabling cost-sensitive graphical UI panels without an external graphics controller. The 40 MHz MIPS32 M4K core renders text, simple icons, and low-color-depth bitmaps at acceptable frame rates; the 32 KB Flash stores font tables and screen templates. The 21 GPIO includes PMP data lines plus chip-select and backlight control, and the -V temperature grade supports outdoor and automotive cabin display applications.
Рекомендуется
Industrial Control and Factory Automation Nodes
The PIC32MX120F032BT-V/SS serves as an intelligent node on industrial RS-485, Modbus, or proprietary field-bus networks, leveraging its two UART modules for simultaneous bus and debug channels. The 32-bit M4K core handles deterministic Modbus RTU framing at 40 MHz with cycles to spare for application logic, while the Peripheral Pin Select (PPS) routes UART, SPI, and timers to any of 27 remappable pins. The -40C to +105C V grade and JTAG boundary scan support factory-floor reliability and in-system test.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC32MX120F032BT-V/SS — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC32MX120F032BT-I/SS | PIC32MX120F032BT-50V/SS | PIC32MX120F032B-V/SS | PIC32MX120F032B-I/SS | PIC32MX110F016BT-V/SS |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-SSOP | 28-SSOP (same) | 28-SSOP (same) | 28-SSOP (same) | 28-SSOP (same) | 28-SSOP (same) |
| Core / Architecture | MIPS32 M4K, 32-bit | MIPS32 M4K, 32-bit | MIPS32 M4K, 32-bit | MIPS32 M4K, 32-bit | MIPS32 M4K, 32-bit | MIPS32 M4K, 32-bit |
| Maximum CPU Clock | 40 MHz | 40 MHz | 50 MHz | 40 MHz | 40 MHz | 40 MHz |
| Flash Program Memory | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 16 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 4 KB |
| Operating Temperature | -40C to +105C (V grade) | -40C to +85C (I grade) | -40C to +105C (V grade) | -40C to +105C (V grade) | -40C to +85C (I grade) | -40C to +105C (V grade) |
| Operating Voltage | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V |
| I/O Pins | 21 | 21 | 21 | 21 | 21 | 21 |
Ключевые отличия
- Extended -40C to +105C V grade vs standard -40C to +85C industrial I grade (против PIC32MX120F032BT-I/SS)
- 32 KB Flash / 8 KB SRAM vs 16 KB / 4 KB in PIC32MX110 (против PIC32MX110F016BT-V/SS)
- Higher -V temperature ceiling than PIC32MX110F016BT-V/SS upgrade sibling (против PIC32MX110F016BT-V/SS)
Заметки по проектированию
Place a 0.1 uF ceramic decoupling capacitor as close as possible to each VDD/AVDD pin pair (pins 16 and 21 on the 28-SSOP) plus a single bulk 10 uF tantalum or ceramic capacitor on the main VDD rail. The PIC32MX120's ADC reference accuracy is sensitive to noisy VDD; route AVDD through a ferrite bead and place the 0.1 uF decoupling on the AVDD side to keep digital switching noise out of analog measurements, per Microchip's PIC32MX1XX/2XX family datasheet DS60001168L.
The /V temperature suffix designates -40C to +105C operation but is NOT equivalent to AEC-Q100 automotive qualification. For AEC-Q100 Grade 1-3 automotive compliance, select from PIC32MX automotive catalog parts. Also note that PIC32MX120F032B part numbers do NOT include on-chip USB - do not assume USB is present based on the 'PIC32' prefix; verify in the family datasheet or USB-equipped PIC32MX2XX siblings are required.
Route the 32.768 kHz secondary oscillator (SOSC) traces symmetrically and keep them short to minimize EMI pickup, and place the crystal within 0.5 inches of the SOSCI/SOSCO pins if RTCC is used. For CTMU capacitive touch, route the touch electrode traces as short, parallel, and uniform as possible; ground flooding around touch traces (with hatched keepout under the electrode) reduces false touches but should not couple excessive capacitance to ground.
Информация о соответствии
RoHS compliant per Microchip product page and SSOP package suffix. /V suffix designates -40C to +105C extended industrial temperature, but is NOT equivalent to AEC-Q100 automotive qualification - automotive customers should consult Microchip's AEC-Q100 catalog parts. REACH and conflict minerals status per Microchip corporate compliance statements.
