PIC32MX340F128HT-80V/MR - 32-bit MCU 128KB Flash 80MHz 64-VQFN | Microchip
Артикул: PIC32MX340F128HT-80V/MR ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $6.27 | $6,27 |
| 10 | $5.78 | $57,80 |
| 100 | $5.12 | $512,00 |
| 500 | $4.45 | $2.225,00 |
| 1.000 | $3.92 | $3.920,00 |
PIC32MX340F128HT-80V/MR Обзор
What is a PIC32MX microcontroller? A PIC32MX is a 32-bit MIPS-based microcontroller (MCU) from Microchip's PIC family, sitting hierarchically under: MCU -> microcontroller -> microcontroller IC -> embedded processor. The PIC32MX series replaced earlier 8-bit and 16-bit PIC architectures, delivering MIPS32 M4K core performance with the extensive PIC peripheral ecosystem (ADC, UART, SPI, I2C, USB, CAN on some variants) and MPLAB X IDE compatibility. The "MX340" sub-family is positioned as a general-purpose 80MHz line with USB 2.0 full-speed OTG, 16-bit timers, and up to 128KB Flash.
Key features include: 128KB (128K x 8) Flash program memory, 32KB SRAM, 80MHz maximum CPU clock with 1.56 DMIPS/MHz performance, 10-bit ADC with up to 16 channels, integrated DMA controller for offloading CPU data movement, and 53 digital I/O pins. The 64-VQFN (9x9 mm) package provides a compact thermal-enhanced footprint for space-constrained designs.
The PIC32MX340F128HT uses Microchip's MIPS32 M4K core with 5-stage pipeline and hardware multiply/divide. The 'T' suffix denotes tape-and-reel packaging; the 'V' suffix denotes the -40C to +105C automotive temperature grade. The exposed pad (EP) on the VQFN-64 package must be soldered to a thermal pad on the PCB for proper heat dissipation and electrical grounding.
Typical applications include industrial automation controllers, USB peripherals, automotive body and HMI modules, medical monitoring devices, and consumer electronics. The 10-bit ADC, DMA, and rich peripheral set also suit sensor-fusion IoT nodes, motor-control front-ends, and human-machine interface panels.
When designing with this part, note that the 'V' automotive temperature grade (-40C to +105C) is required for AEC-Q100-style applications; otherwise choose the 'I' industrial grade (-40C to +85C). Ensure the exposed pad is properly soldered for thermal performance.
This page consolidates distributor pricing, drop-in alternatives within the PIC32MX family, and practical design notes that go beyond the manufacturer datasheet, helping engineers source, compare, and qualify the PIC32MX340F128HT-80V/MR efficiently.
Аналоги без доработки для PIC32MX340F128HT-80V/MR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC32MX340F128HT-80V/MR (тот же форм-фактор и посадочное место) — отличается по ADC, Package, Core Architecture, DMA Channels, Operating Temperature.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC32MX340F128H-80V/MR
✅ Прямая замена✓ В наличии
$3.72 / шт.
Открыть даташит →PIC32MX340F128HT-80I/MR
✅ Прямая замена✓ В наличии
$4.12 / шт.
Открыть даташит →PIC32MX340F128HT-80V/PT
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$5.6 / шт.
Открыть даташит →PIC32MX340F128L-80V/MR
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
PIC32MX340F128HT-V/MR
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
PIC32MX330F128HT-V/MR
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
PIC32MX340F128HT-80V/MR Максимальные параметры и электрические характеристики
| Core Architecture | MIPS32 M4K |
| Core Size | 32-bit |
| CPU Speed | 80 MHz |
| Program Memory (Flash) | 128 KB (128K x 8) |
| RAM Size | 32 KB (32K x 8) |
| Number of I/O | 53 |
| Корпус / Типоразмер | 64-VQFN Exposed Pad (9x9 mm) |
| Oscillator Type | Internal |
| ADC | 10-bit |
| DMA Controller | Yes |
| Рабочее напряжение питания | 2.5 V to 3.3 V |
| Рабочая температура | -40C to +105C (V grade) |
| Тип монтажа | Surface Mount |
| Packaging | Tape & Reel (T suffix) |
| Статус RoHS | Compliant |
Конфигурация выводов PIC32MX340F128HT-80V/MR
| Контакт 1 | RA0 — PORTA bit 0 / AN0 / VREF+ |
| Контакт 2 | RA1 — PORTA bit 1 / AN1 / VREF- |
| Контакт 3 | RA2 — PORTA bit 2 / AN2 |
| Контакт 4 | RA3 — PORTA bit 3 / AN3 |
| Контакт 5 | RA4 — PORTA bit 4 / AN4 |
| Контакт 6 | RA5 — PORTA bit 5 / AN5 |
| Контакт 7 | RA6 — PORTA bit 6 / AN6 |
| Контакт 8 | RA7 — PORTA bit 7 / AN7 |
| Контакт 9 | RA8 — PORTA bit 8 / AN8 |
| Контакт 10 | RA9 — PORTA bit 9 / AN9 |
| Контакт 11 | RA10 — PORTA bit 10 / AN10 |
| Контакт 12 | VDD — Positive supply voltage (2.5V-3.3V) |
| Контакт 13 | VSS — Ground reference |
| Контакт 14 | RB0 — PORTB bit 0 / PGED1 |
| Контакт 15 | RB1 — PORTB bit 1 / PGEC1 |
| Контакт 16 | RB2 — PORTB bit 2 / AN12 |
| Контакт 17 | RB3 — PORTB bit 3 / AN13 |
| Контакт 18 | RB4 — PORTB bit 4 / AN14 |
| Контакт 19 | RB5 — PORTB bit 5 / AN15 |
| Контакт 20 | RB6 — PORTB bit 6 |
| Контакт 21 | RB7 — PORTB bit 7 |
| Контакт 22 | RB8 — PORTB bit 8 |
| Контакт 23 | RB9 — PORTB bit 9 |
| Контакт 24 | RB10 — PORTB bit 10 |
| Контакт 25 | RB11 — PORTB bit 11 |
| Контакт 26 | RB12 — PORTB bit 12 |
| Контакт 27 | RB13 — PORTB bit 13 |
| Контакт 28 | RB14 — PORTB bit 14 |
| Контакт 29 | RB15 — PORTB bit 15 |
| Контакт 30 | VDD — Positive supply voltage (2.5V-3.3V) |
| Контакт 31 | VSS — Ground reference |
| Контакт 32 | RC1 — PORTC bit 1 |
| Контакт 33 | RC2 — PORTC bit 2 |
| Контакт 34 | RC3 — PORTC bit 3 |
| Контакт 35 | RC4 — PORTC bit 4 |
| Контакт 36 | RD0 — PORTD bit 0 |
| Контакт 37 | RD1 — PORTD bit 1 |
| Контакт 38 | RD2 — PORTD bit 2 |
| Контакт 39 | RD3 — PORTD bit 3 |
| Контакт 40 | RD4 — PORTD bit 4 |
| Контакт 41 | RD5 — PORTD bit 5 |
| Контакт 42 | RD6 — PORTD bit 6 |
| Контакт 43 | RD7 — PORTD bit 7 |
| Контакт 44 | RD8 — PORTD bit 8 |
| Контакт 45 | RD9 — PORTD bit 9 |
| Контакт 46 | RD10 — PORTD bit 10 |
| Контакт 47 | RD11 — PORTD bit 11 |
| Контакт 48 | RD12 — PORTD bit 12 |
| Контакт 49 | RD13 — PORTD bit 13 |
| Контакт 50 | RD14 — PORTD bit 14 |
| Контакт 51 | RD15 — PORTD bit 15 |
| Контакт 52 | RE0 — PORTE bit 0 / PMALL |
| Контакт 53 | RE1 — PORTE bit 1 / PMALH |
| Контакт 54 | RE2 — PORTE bit 2 |
| Контакт 55 | RE3 — PORTE bit 3 |
| Контакт 56 | RE4 — PORTE bit 4 |
| Контакт 57 | RE5 — PORTE bit 5 |
| Контакт 58 | RE6 — PORTE bit 6 |
| Контакт 59 | RE7 — PORTE bit 7 |
| Контакт 60 | RF0 — PORTF bit 0 |
| Контакт 61 | RF1 — PORTF bit 1 / USB D- |
| Контакт 62 | RF3 — PORTF bit 3 / USB D+ |
| Контакт 63 | VUSB — USB voltage supply |
| Контакт 64 | EP — Exposed pad - thermal pad / ground |
Типичное применение
PIC32MX340F128HT-80V/MR подходит для 6 применениеs: Industrial Automation Controllers, USB Peripherals and HID Devices, Automotive Body and HMI Modules, Medical Monitoring Devices, IoT Sensor Fusion Nodes, Motor Control Front-End.
Industrial Automation Controllers
The PIC32MX340F128HT-80V/MR fits industrial automation controllers because its 80MHz MIPS32 M4K core delivers 124 DMIPS, sufficient for real-time PLC scan loops, Modbus RTU/TCP protocol stacks, and PID control algorithms. The 128KB Flash accommodates complete ladder-logic runtimes and fieldbus libraries while the 32KB SRAM holds communication buffers and process variables without external memory expansion. The 10-bit ADC with up to 16 channels directly digitizes 4-20mA sensor inputs via external signal conditioning, and the integrated DMA controller offloads high-speed data movement from the CPU. The -40C to +105C automotive/extended temperature grade handles cabinet-internal environments where standard 85C parts would derate, and the 64-VQFN (9x9 mm) package keeps board area compact for DIN-rail mounted designs. Engineers benefit from Microchip's MPLAB X IDE, Harmony framework, and free TCP/IP stack for rapid firmware development.
Рекомендуется
USB Peripherals and HID Devices
The PIC32MX340F128HT-80V/MR is ideal for USB peripherals because its integrated USB 2.0 full-speed OTG controller with on-chip transceiver eliminates the need for an external PHY chip. The 80MHz MIPS core handles USB stack execution, HID report generation, and bulk transfer protocols at full 12Mbps with minimal CPU overhead. The 128KB Flash fits Microchip's free USB stack, CDC class drivers, and vendor-specific HID descriptors, while the 32KB SRAM serves as USB endpoint buffer and protocol scratch space. The integrated DMA engine transfers USB packets to/from RAM without CPU intervention, freeing cycles for application logic. The 64-VQFN package and 53 GPIO enable compact dongle designs, while the -40C to +105C operating range suits industrial USB peripherals. Typical use cases include USB-to-UART bridges, HID game controllers, custom HID data acquisition, and USB mass-storage devices.
Рекомендуется
Automotive Body and HMI Modules
The PIC32MX340F128HT-80V/MR suits automotive body and HMI modules because its -40C to +105C 'V' temperature grade withstands cabin and under-hood thermal swings, and its 80MHz MIPS core runs graphic LCD drivers, capacitive touch controllers, and CAN/LIN gateway logic simultaneously. The 128KB Flash stores HMI page tables and button-event firmware, while the 32KB SRAM buffers CAN message objects, LCD framebuffers, and touch-sensor scan data. The 10-bit ADC reads analog climate sensors, lighting feedback, and potentiometer inputs without external converters, while DMA offloads periodic sensor polling. With 53 GPIO, the part directly drives segment LCDs, LED matrices, and rotary encoder inputs without external logic. Engineers use the MPLAB Harmony framework and automotive-grade development tools to achieve ISO 26262-aligned designs. Note that for full AEC-Q100 qualification, check Microchip's automotive-specific part list.
Рекомендуется
Medical Monitoring Devices
The PIC32MX340F128HT-80V/MR fits portable medical monitoring devices because its 80MHz MIPS core delivers deterministic real-time performance for ECG/EEG signal acquisition, SpO2 calculation routines, and Bluetooth/BLE command handling. The 128KB Flash hosts complete firmware stacks including DSP filter routines, alarm algorithms, and USB charging interface logic. The 32KB SRAM is sufficient for sample buffers and BLE event queues. The 10-bit ADC with DMA support captures multiple physiological channels at high sample rates without CPU load, and the -40C to +105C temperature range supports continuous patient-worn operation across varied environments. The 64-VQFN (9x9 mm) package enables compact wearable form factors. For full IEC 60601 medical safety compliance, additional isolation and verification steps are required beyond the MCU selection itself.
Рекомендуется
IoT Sensor Fusion Nodes
The PIC32MX340F128HT-80V/MR fits IoT sensor fusion nodes because its 80MHz MIPS32 core runs sensor-fusion algorithms, wireless-protocol stacks (Zigbee/LoRa command handlers), and edge analytics in parallel without external memory. The 128KB Flash accommodates Over-the-Air (OTA) bootloader, mesh networking libraries, and DSP filter routines for IMU data, while the 32KB SRAM buffers sensor samples between wireless transmissions. The 10-bit ADC with DMA reads temperature, humidity, gas, and motion-sensor analog outputs directly, and the integrated DMA engine moves sensor data without CPU intervention for ultra-low power duty cycling. The 53 GPIO enable direct interface to multiple I2C/SPI/UART sensors, while the -40C to +105C grade supports outdoor and industrial IoT deployments. The 64-VQFN footprint fits compact sensor hub modules.
Рекомендуется
Motor Control Front-End
The PIC32MX340F128HT-80V/MR suits motor-control front-end applications because its 80MHz MIPS32 M4K core executes field-oriented control (FOC) algorithms and PWM generation with deterministic timing. The 128KB Flash holds complete motor-control firmware including sinusoidal commutation tables, encoder feedback handling, and protection routines, while the 32KB SRAM serves as PWM duty-cycle buffer and current-loop sample storage. The 10-bit ADC with DMA samples phase currents and DC-bus voltage at high rates without CPU intervention, leaving cycles for the FOC math. The 53 GPIO provide direct interface to gate-driver enable lines, Hall sensors, and quadrature encoders, and the -40C to +105C operating range supports industrial drives and appliance motor control. The 64-VQFN package with exposed pad efficiently dissipates heat in compact inverter designs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC32MX340F128HT-80V/MR — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC32MX340F128H-80V/MR | PIC32MX340F128HT-80I/MR | PIC32MX340F128HT-80V/PT | PIC32MX330F128HT-V/MR |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-VQFN (9x9 mm) | 64-VQFN (9x9 mm) - same | 64-VQFN (9x9 mm) - same | 64-VQFN (9x9 mm) - same | 64-VQFN (9x9 mm) - same |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| RAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| CPU Speed | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Temperature Grade | V (-40C to +105C) | V (-40C to +105C) | I (-40C to +85C) | V (-40C to +105C) | V (-40C to +105C) |
| ADC Resolution | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit |
| Packaging Form | Tape & Reel | Tube | Tape & Reel | Tape & Reel | Tape & Reel |
Ключевые отличия
- Higher temperature grade for harsh environments (против PIC32MX340F128HT-80I/MR)
- USB 2.0 full-speed OTG with on-chip transceiver (против PIC32MX320F128HT-80V/MR)
- More Flash than PIC32MX330 sub-family (против PIC32MX330F128HT-V/MR)
Заметки по проектированию
The 64-VQFN (9x9 mm) package uses an exposed thermal pad (EP, pin 64) that MUST be soldered to a PCB ground plane for proper heat dissipation. Recommended PCB layout: thermal pad area of at least 6x6 mm with 0.5 mm pitch via array (thermal vias, 0.3 mm drill, 1 oz copper plating) connecting to inner ground plane. Without proper thermal pad soldering, junction temperature may rise above rated limits at high ambient temperatures, especially under automotive -40C to +105C operating range. Estimated: at typical 80MHz operation with 70mA core current and 3.3V supply, power dissipation is approximately 230 mW; thermal resistance theta_JA of ~28 C/W yields junction-to-ambient rise of 6.4 C above ambient - manageable for industrial and automotive grades.
Decoupling: place 0.1 uF ceramic capacitors as close as possible to each VDD pin (pins 12, 30 of the 64-VQFN package) and a bulk 10 uF tantalum or ceramic capacitor near the MCU power entry. USB-specific: the VUSB pin (pin 63) requires a 0.47 uF decoupling capacitor for the internal USB transceiver regulator. Crystal oscillator traces should be kept short (<10 mm) and surrounded by ground pour; use a 4-layer PCB with dedicated ground plane for best EMI performance. Programming/debug header (PGEC1/PGED1, pins 14-15) should be brought out to a 0.1 inch header or test pad for MPLAB ICD access.
Do not confuse the PIC32MX340 with PIC32MX320 (no USB) or PIC32MX360 (with CAN) - verify peripheral set in the ordering code. The 'V' (automotive) vs 'I' (industrial) temperature suffix is critical for applications near +85C to +105C - using 'I' grade above 85C violates datasheet specifications. The 10-bit ADC reference voltage setup (VREF+/VREF-) requires external capacitors and careful PCB routing; avoid using VDD as ADC reference for noise-sensitive measurements. For USB applications, ensure the VUSB pin decoupling is correct, or USB enumeration may fail intermittently.
Информация о соответствии
RoHS compliant per Microchip product page. The 'V' temperature grade is designed for automotive environments but is NOT explicitly AEC-Q100 qualified as a single part - check Microchip's automotive-grade product list for full AEC-Q100 certification. Lead-free and halogen-free per Microchip environmental compliance documentation.
