PIC32MX570F512HT-V/PT - 50MHz 32-bit MCU 512KB Flash TQFP-64 | Microchip
Артикул: PIC32MX570F512HT-V/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $8.95 | $8,95 |
| 10 | $8.05 | $80,50 |
| 100 | $7.15 | $715,00 |
| 500 | $6.4 | $3.200,00 |
| 1.000 | $5.85 | $5.850,00 |
PIC32MX570F512HT-V/PT Обзор
A microcontroller (MCU) is a programmable processor with on-chip Flash program memory, SRAM data memory, and a rich set of peripherals (I/O, timers, communication controllers, ADCs) integrated into one package. The PIC32 family sits within Microchip's 32-bit portfolio under the broader PIC microcontroller line, following the MIPS32 architecture and supporting position in the hierarchy MCU -> 32-bit microcontroller -> embedded processor -> semiconductor IC.
Key differentiating features include 512 KB Flash (twice the density of mid-range PIC32MX1/2/3 parts), dedicated USB and CAN hardware blocks eliminating external transceivers in many cases, Peripheral Pin Select (PPS) for flexible signal routing, and a Parallel Master Port (PMP) with dual buffers for graphics or external memory interfaces. The CTMU enables touch sensing and capacitive measurement applications without an external analog front end.
Architecturally, the PIC32MX5 family uses a 5-stage pipeline MIPS M4K core with single-cycle multiply and hardware divide, supported by a 16 KB instruction cache and prefetch buffer. This balanced pipeline delivers 1.66 DMIPS/MHz efficiency at low power, with multiple low-power sleep modes managed by the on-chip Power Management Unit (PMU).
Typical applications include USB peripherals (HID, CDC, mass storage), CAN-based industrial networking nodes, audio playback with I2S DAC interfaces, graphical HMI panels using PMP-driven LCDs, and IoT edge nodes requiring both USB and CAN connectivity. The integrated USB and CAN peripherals make this device a strong fit for bridging industrial and PC connectivity in compact form factors.
When designing with this MCU, carefully review the PPS mapping table because most digital peripheral signals are remappable to multiple pins, and incorrect PPS locking is a common source of bring-up issues. Allocate at least one timer for the RTCC crystal startup delay and ensure the CTMU reference current is calibrated per application notes.
This page consolidates distributor pricing, drop-in same-family alternatives, and design guidance that supplements the Microchip datasheet and family reference manual for engineers evaluating the PIC32MX5 platform.
Аналоги без доработки для PIC32MX570F512HT-V/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC32MX570F512HT-V/PT (тот же форм-фактор и посадочное место) — отличается по ADC, Package, Parallel Master Port (PMP), Core Architecture, SPI Modules.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC32MX570F512HT-I/MR
✅ Прямая замена✓ В наличии
$4.78 / шт.
Открыть даташит →PIC32MX570F512HT-50I/PT
✅ Прямая замена✓ В наличии
$4.41 / шт.
Открыть даташит →PIC32MX570F512H-50I/PT
✅ Прямая замена✓ В наличии
$4.11 / шт.
Открыть даташит →PIC32MX570F512H-50I/MR
✅ Прямая замена✓ В наличии
$4.25 / шт.
Открыть даташит →PIC32MX470F512HT-V/PT
✅ Прямая замена✓ В наличии
$4.2 / шт.
Открыть даташит →PIC32MX470F512HT-I/PT
✅ Прямая замена✓ В наличии
$4.1 / шт.
Открыть даташит →PIC32MX570F512HT-V/PT Максимальные параметры и электрические характеристики
| Core Architecture | MIPS32 M4K |
| Maximum CPU Frequency | 50 MHz |
| Performance | 83 DMIPS |
| Program Memory (Flash) | 512 KB |
| Data Memory (SRAM) | 64 KB |
| Operating Voltage Range | 2.3 V to 3.6 V |
| Диапазон рабочих температур | -40C to +105C (V-temp) |
| Корпус | 64-pin TQFP (PT), 10x10 mm |
| USB Module | USB 2.0 Full-Speed Device/Host/OTG |
| CAN Module | 2x CAN 2.0B |
| SPI Modules | 4 |
| I2S Modules | 2 |
| Analog Comparators | 3 |
| CTMU | Yes (Charge Time Measurement Unit) |
| RTCC | Yes (Real-Time Clock/Calendar) |
| PMP | Yes (Parallel Master Port with dual buffers) |
| PPS | Yes (Peripheral Pin Select) |
| Тип монтажа | Surface Mount |
| Уровень MSL | MSL3 (JEDEC J-STD-020) |
| Статус RoHS | Compliant |
Конфигурация выводов PIC32MX570F512HT-V/PT
| Контакт 1 | RB0 — I/O port B bit 0 (PPS-capable) |
| Контакт 2 | RB1 — I/O port B bit 1 (PPS-capable) |
| Контакт 3 | RB2 — I/O port B bit 2 (PPS-capable) |
| Контакт 4 | RB3 — I/O port B bit 3 (PPS-capable) |
| Контакт 5 | RB4 — I/O port B bit 4 (PPS-capable) |
| Контакт 6 | RB5 — I/O port B bit 5 (PPS-capable) |
| Контакт 7 | RB6 — I/O port B bit 6 (PPS-capable) |
| Контакт 8 | RB7 — I/O port B bit 7 (PPS-capable) |
| Контакт 9 | RC0 — I/O port C bit 0 (PPS-capable) |
| Контакт 10 | RC1 — I/O port C bit 1 (PPS-capable) |
| Контакт 11 | RC2 — I/O port C bit 2 (PPS-capable) |
| Контакт 12 | RC3 — I/O port C bit 3 (PPS-capable) |
| Контакт 13 | RC4 — I/O port C bit 4 (PPS-capable) |
| Контакт 14 | RD0 — I/O port D bit 0 (PPS-capable) |
| Контакт 15 | RD1 — I/O port D bit 1 (PPS-capable) |
| Контакт 16 | RD2 — I/O port D bit 2 (PPS-capable) |
| Контакт 17 | RD3 — I/O port D bit 3 (PPS-capable) |
| Контакт 18 | RD4 — I/O port D bit 4 (PPS-capable) |
| Контакт 19 | RD5 — I/O port D bit 5 (PPS-capable) |
| Контакт 20 | RD6 — I/O port D bit 6 (PPS-capable) |
| Контакт 21 | RD7 — I/O port D bit 7 (PPS-capable) |
| Контакт 22 | RC5 — I/O port C bit 5 (PPS-capable) |
| Контакт 23 | RC6 — I/O port C bit 6 (PPS-capable) |
| Контакт 24 | RC7 — I/O port C bit 7 (PPS-capable) |
| Контакт 25 | RC8 — I/O port C bit 8 (PPS-capable) |
| Контакт 26 | RC9 — I/O port C bit 9 (PPS-capable) |
| Контакт 27 | RE0 — I/O port E bit 0 (PPS-capable) |
| Контакт 28 | RE1 — I/O port E bit 1 (PPS-capable) |
| Контакт 29 | RE2 — I/O port E bit 2 (PPS-capable) |
| Контакт 30 | RE3 — I/O port E bit 3 (PPS-capable) |
| Контакт 31 | RE4 — I/O port E bit 4 (PPS-capable) |
| Контакт 32 | RE5 — I/O port E bit 5 (PPS-capable) |
| Контакт 33 | RE6 — I/O port E bit 6 (PPS-capable) |
| Контакт 34 | RE7 — I/O port E bit 7 (PPS-capable) |
| Контакт 35 | RF0 — I/O port F bit 0 (PPS-capable) |
| Контакт 36 | RF1 — I/O port F bit 1 (PPS-capable) |
| Контакт 37 | RF2 — I/O port F bit 2 (PPS-capable) |
| Контакт 38 | RF3 — I/O port F bit 3 (PPS-capable) |
| Контакт 39 | RF4 — I/O port F bit 4 (PPS-capable) |
| Контакт 40 | RF5 — I/O port F bit 5 (PPS-capable) |
| Контакт 41 | RF6 — I/O port F bit 6 (PPS-capable) |
| Контакт 42 | RF7 — I/O port F bit 7 (PPS-capable) |
| Контакт 43 | RG0 — I/O port G bit 0 (PPS-capable) |
| Контакт 44 | RG1 — I/O port G bit 1 (PPS-capable) |
| Контакт 45 | RG2 — I/O port G bit 2 (PPS-capable) |
| Контакт 46 | RG3 — I/O port G bit 3 (PPS-capable) |
| Контакт 47 | RG6 — I/O port G bit 6 (PPS-capable) |
| Контакт 48 | RG7 — I/O port G bit 7 (PPS-capable) |
| Контакт 49 | RG8 — I/O port G bit 8 (PPS-capable) |
| Контакт 50 | RG9 — I/O port G bit 9 (PPS-capable) |
| Контакт 51 | VSS — Ground |
| Контакт 52 | VDD — Supply voltage 2.3V-3.6V |
| Контакт 53 | MCLR — Master clear reset (active-low) |
| Контакт 54 | RA0 — I/O port A bit 0 (PPS-capable) |
| Контакт 55 | RA1 — I/O port A bit 1 (PPS-capable) |
| Контакт 56 | RA2 — I/O port A bit 2 (PPS-capable) |
| Контакт 57 | RA3 — I/O port A bit 3 (PPS-capable) |
| Контакт 58 | RA4 — I/O port A bit 4 (PPS-capable) |
| Контакт 59 | RA5 — I/O port A bit 5 (PPS-capable) |
| Контакт 60 | RA6 — I/O port A bit 6 (PPS-capable) |
| Контакт 61 | RA7 — I/O port A bit 7 (PPS-capable) |
| Контакт 62 | RA9 — I/O port A bit 9 (PPS-capable) |
| Контакт 63 | RA10 — I/O port A bit 10 (PPS-capable) |
| Контакт 64 | OSC1 — Crystal oscillator input |
Типичное применение
PIC32MX570F512HT-V/PT подходит для 6 применениеs: Industrial CAN-to-USB Gateway, USB Audio Device with I2S DAC, Automotive HMI with Graphical LCD, IoT Edge Sensor Node, Portable Medical Data Logger, USB HID Industrial Controller.
Industrial CAN-to-USB Gateway
The PIC32MX570F512HT-V/PT fits industrial CAN-to-USB gateway designs because of its on-chip dual CAN 2.0B controllers combined with USB 2.0 full-speed device/host/OTG in a single silicon die. The 512 KB Flash holds full CANopen or J1939 protocol stacks alongside USB CDC/HID class firmware without external memory. The -40C to +105C V-temp grade supports installation inside unenclosed industrial cabinets. The CTMU and RTCC enable timestamping of CAN messages for diagnostic logging. With 83 DMIPS performance, the MCU can route CAN frames at 1 Mbps while maintaining USB throughput, making this part a single-chip bridge between fieldbus and host PC networks.
Рекомендуется
USB Audio Device with I2S DAC
The PIC32MX570F512HT-V/PT serves USB audio applications because of its two integrated I2S modules that interface directly to external audio DACs without glue logic, plus its USB 2.0 full-speed device controller that handles USB Audio Class 1.0 enumeration at 12 Mbps. The 512 KB Flash stores USB descriptors, audio class drivers, and DSP volume/bass control code. The 64 KB SRAM is sufficient for buffering 48 kHz stereo audio at 16-bit depth. The CTMU supports capacitive touch buttons on the device housing. Compared to a typical Cortex-M0+ solution, this part delivers 83 DMIPS enabling real-time audio mixing in software.
Рекомендуется
Automotive HMI with Graphical LCD
The PIC32MX570F512HT-V/PT drives HMI panels in automotive dashboards because its Parallel Master Port (PMP) with dual read/write buffers connects directly to TFT LCD controllers without external address-latch chips. The Peripheral Pin Select (PPS) allows flexible pin assignment for both LCD data and touch-sensing lines, reducing PCB routing congestion. The V-temp -40C to +105C grade handles automotive cabin thermal stress. The 512 KB Flash stores graphics assets, fonts, and CAN-based body control stacks, while 64 KB SRAM supports framebuffer double-buffering. CTMU drives the touch panel without an external AFE.
Рекомендуется
IoT Edge Sensor Node
The PIC32MX570F512HT-V/PT is well-suited to IoT edge sensor nodes because of its RTCC for accurate timestamping of sensor readings, its CTMU for interfacing to resistive or capacitive sensors without external analog circuits, and its USB OTG for either bus-powered sensor hubs or host-mode data logging to USB sticks. The 50 MHz/83 DMIPS performance processes local filtering and threshold detection on incoming sensor streams before forwarding. V-temp grade permits outdoor enclosure deployment. PPS lets one pin serve multiple sensor interfaces dynamically. The 512 KB Flash accommodates TLS libraries for secure firmware updates.
Рекомендуется
Portable Medical Data Logger
The PIC32MX570F512HT-V/PT fits portable medical data loggers because of its low-power sleep modes managed by the on-chip PMU, its USB device port for direct PC charging and data offload, and its RTCC for time-stamping patient records to regulatory standards. The 512 KB Flash stores months of compressed patient samples while 64 KB SRAM serves as a ring buffer during USB enumeration. The CTMU interfaces to skin-electrode impedance sensors without an external AFE. The V-temp grade supports clinical environments. 83 DMIPS runs AES-128 encryption on logged data before USB transfer, supporting HIPAA compliance workflows.
Рекомендуется
USB HID Industrial Controller
The PIC32MX570F512HT-V/PT operates as a USB HID industrial controller because of its full-speed USB device port for plug-and-play PC connectivity, dual CAN modules for fieldbus integration, and 50 MHz/83 DMIPS performance for protocol conversion without external coprocessors. The 512 KB Flash holds HID report descriptors, CANopen stack, and control logic. The RTCC timestamps events for traceability logs. PPS allows USB D+/D- lines and CAN TX/RX to be remapped for flexible PCB layout. V-temp grade handles factory-floor thermal rise near motor drives. CTMU detects enclosure open events via capacitive sensing.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC32MX570F512HT-V/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC32MX570F512HT-I/MR | PIC32MX570F512HT-50I/PT | PIC32MX570F512H-50I/PT | PIC32MX470F512HT-V/PT | PIC32MX470F512HT-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-64 (PT) | QFN-64 (MR) - same pin count | TQFP-64 (PT) - same | TQFP-64 (PT) - same | TQFP-64 (PT) - same | TQFP-64 (PT) - same |
| Core | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K |
| Max Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 120 MHz | 120 MHz |
| Flash | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| SRAM | 64 KB | 64 KB | 64 KB | 64 KB | 128 KB | 128 KB |
| Operating Temperature | -40C to +105C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +105C | -40C to +85C |
| USB | USB FS Device/Host/OTG | USB FS Device/Host/OTG | USB FS Device/Host/OTG | USB FS Device/Host/OTG | USB FS Device/Host/OTG | USB FS Device/Host/OTG |
| CAN | 2x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B |
Ключевые отличия
- Higher temperature grade for industrial and automotive deployment (против PIC32MX570F512HT-50I/PT)
- Peripheral Pin Select (PPS) flexibility (против PIC32MX470F512HT-V/PT)
- USB device/host/OTG triple-role support (против PIC32MX570F512HT-I/MR)
Заметки по проектированию
Power the PIC32MX570F512HT-V/PT from a regulated 3.3V rail capable of at least 100 mA peak, with a 10uF bulk decoupling capacitor plus a 100 nF high-frequency bypass capacitor placed within 5 mm of each VDD pin pair. The MCU's core logic and I/O ring share the same supply domain, so rail noise from switching regulators on adjacent circuits can couple into USB signal integrity. A ferrite bead or pi-filter between the 3.3V regulator output and the MCU's VDD pins is recommended for USB-certified designs.
Route the 50 MHz system clock trace as a short, impedance-controlled length with a ground guard on both sides. PPS-configurable pins allow USB D+/D-, CAN TX/RX, and I2S signals to be remapped to multiple physical pins - choose the mapping that places high-speed signals on the most routing-friendly pin group. Keep the 32.768 kHz RTCC crystal traces short and surrounded by ground to minimize load capacitance drift that would otherwise affect RTCC accuracy.
Configure the Configuration Words (DEVCFG0/1/2/3) early in firmware - failing to lock PPS mappings before peripheral activation can result in signals appearing on unintended pins during the first instruction cycles after reset. Also note that the V-temp grade is required for -40C to +105C operation; using the -I/PT variant in a thermally demanding environment may cause parametric drift or permanent damage. Verify the Configuration Word settings using MPLAB X IDE before code lock to prevent bricking.
Информация о соответствии
RoHS compliant per Microchip product page. AEC-Q100 qualification is not applicable for this industrial-grade MCU - choose PIC32MX5 AEC-Q100 qualified variants for automotive safety-critical applications.
