PIC32MZ1024ECM100T-I/PT - 200MHz 32-bit MCU 1MB Flash TQFP-100 | Microchip
Артикул: PIC32MZ1024ECM100T-I/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $14.5 | $14,50 |
| 10 | $13.2 | $132,00 |
| 100 | $11.65 | $1.165,00 |
| 500 | $10.4 | $5.200,00 |
| 1.000 | $9.55 | $9.550,00 |
PIC32MZ1024ECM100T-I/PT Обзор
A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, volatile and non-volatile memory, and programmable peripherals on a single silicon die. The PIC32MZ family belongs to the broader category of embedded microcontrollers within the semiconductor hierarchy: MCU -> embedded processor -> microprocessor -> semiconductor IC. microAptiv cores combine compact code density with DSP extensions, placing the PIC32MZ EC family above simple Cortex-M0/M0+ parts but below Cortex-M7 in raw signal-processing capability.
Key features of the PIC32MZ1024ECM100T-I/PT include a 10-bit 500 KSPS 40-channel ADC, CAN, UART, I2C, PMP, EBI, SQI, analog comparators, and SPI/I2S interfaces. The on-chip crypto engine and integrated Ethernet MAC make the EC variant differentiated for connected industrial designs, while dual-panel Flash enables firmware Live Update without downtime.
The microAptiv pipeline supports both MIPS32 and compressed microMIPS instruction modes, allowing a C compiler to trade code size for throughput. An MMU provides full virtual-memory support for embedded Linux or RTOS environments, while the 16 KB instruction cache and 4 KB data cache accelerate tight DSP loops such as audio and motor-control algorithms.
Typical applications include industrial Ethernet gateways, building automation controllers, CAN-connected automotive body and chassis ECUs, audio processing with I2S codecs, and graphical HMI front panels driving LCD or TFT displays via the parallel master port (PMP).
Design with this device by budgeting 100-pin GPIO carefully - the EC variant consumes roughly 30 pins for Ethernet, USB, and high-speed serial interfaces, leaving 70+ for user I/O. Use decoupling per Microchip AN583 - one 100 nF X7R per VDD pin, plus a single 4.7 uF bulk near the regulator.
This page synthesizes distributor pricing, drop-in PIC32MZ EC family alternates, and practical design notes that complement the manufacturer datasheet with practical cross-referencing and BOM-decision guidance.
Аналоги без доработки для PIC32MZ1024ECM100T-I/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC32MZ1024ECM100T-I/PT (тот же форм-фактор и посадочное место) — отличается по Package, ADC, USB, Core Architecture, Crypto Engine.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC32MZ1024ECM100-I/PT
✅ Прямая замена✓ В наличии
$7.45 / шт.
Открыть даташит →PIC32MZ1024ECM100T-I/PF
✅ Прямая замена✓ В наличии
$11.28 / шт.
Открыть даташит →PIC32MZ1024ECM100T-E/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MZ1024ECM100-I/PF
✅ Прямая замена✓ В наличии
$6.65 / шт.
Открыть даташит →PIC32MZ1024ECH100T-I/PT
✅ Прямая замена✓ В наличии
$8.99 / шт.
Открыть даташит →PIC32MZ1024ECG100T-I/PF
✅ Прямая замена✓ В наличии
$6.75 / шт.
Открыть даташит →PIC32MZ1024ECM100T-I/PT Максимальные параметры и электрические характеристики
| Core | MIPS32 microAptiv (PIC32MZ) |
| Architecture | 32-bit RISC with DSP extensions |
| Maximum CPU Speed | 200 MHz |
| DMIPS Performance | 330 DMIPS |
| Program Flash | 1024 KB (1 MB) |
| Data SRAM | 256 KB |
| Instruction Cache | 16 KB |
| Data Cache | 4 KB |
| ADC | 10-bit, 500 KSPS, 40 channels |
| Напряжение питания | 2.3 V to 3.6 V |
| Рабочая температура | -40C to +85C (Industrial) |
| Корпус | 100-pin TQFP (PT), 12x12 mm, 0.4 mm pitch |
| Тип монтажа | Surface Mount |
| Уровень MSL | 3 (168 hours) |
| Communication Interfaces | Ethernet MAC, CAN, USB, UART, I2C, SPI, I2S, SQI, PMP, EBI |
| Crypto Engine | Integrated (EC variant) |
| DMA Channels | 8 (with dedicated descriptor RAM) |
| Analog Comparators | Yes |
| Operating Voltage Range | 3.3 V typical |
| Статус RoHS | Compliant |
Конфигурация выводов PIC32MZ1024ECM100T-I/PT
| Контакт 1 | RGND — Reference ground for Ethernet PHY |
| Контакт 2 | RGMII_TD0 — Ethernet transmit data 0 (RMII/RGMII) |
| Контакт 3 | RGMII_TD1 — Ethernet transmit data 1 |
| Контакт 4 | VDD — 3.3V supply voltage |
| Контакт 5 | VSS — Ground |
| Контакт 6 | RGMII_TX_EN — Ethernet transmit enable |
| Контакт 7 | RGMII_TX_CLK — Ethernet transmit clock input |
| Контакт 8 | OSC1 — Crystal oscillator input |
| Контакт 9 | OSC2 — Crystal oscillator output |
| Контакт 10 | VDD — 3.3V supply voltage |
| Контакт 11 | VSS — Ground |
| Контакт 12 | RGMII_RD0 — Ethernet receive data 0 |
| Контакт 13 | RGMII_RD1 — Ethernet receive data 1 |
| Контакт 14 | RGMII_RX_CLK — Ethernet receive clock |
| Контакт 15 | RGMII_CRSDV — Ethernet carrier sense/data valid |
| Контакт 16 | RGMII_RX_ER — Ethernet receive error |
| Контакт 17 | MCLR — Master clear reset (active-low) |
| Контакт 18 | PGEC1 — Programming/debug clock |
| Контакт 19 | PGED1 — Programming/debug data |
| Контакт 20 | VDD — 3.3V supply voltage |
| Контакт 21 | VSS — Ground |
| Контакт 22 | RA0 — PORTA bit 0 (GPIO/AN0) |
| Контакт 23 | RA1 — PORTA bit 1 (GPIO/AN1) |
| Контакт 24 | RA2 — PORTA bit 2 (GPIO/AN2) |
| Контакт 25 | RA3 — PORTA bit 3 (GPIO/AN3) |
| Контакт 26 | RA4 — PORTA bit 4 (GPIO/AN4) |
| Контакт 27 | RA5 — PORTA bit 5 (GPIO/AN5) |
| Контакт 28 | RA6 — PORTA bit 6 (GPIO/AN6) |
| Контакт 29 | RA7 — PORTA bit 7 (GPIO/AN7) |
| Контакт 30 | VDD — 3.3V supply voltage |
| Контакт 31 | VSS — Ground |
| Контакт 32 | RB0 — PORTB bit 0 (GPIO/AN8/PG) |
| Контакт 33 | RB1 — PORTB bit 1 (GPIO/AN9) |
| Контакт 34 | RB2 — PORTB bit 2 (GPIO/AN10) |
| Контакт 35 | RB3 — PORTB bit 3 (GPIO/AN11) |
| Контакт 36 | RB4 — PORTB bit 4 (GPIO/AN12) |
| Контакт 37 | RB5 — PORTB bit 5 (GPIO/AN13) |
| Контакт 38 | RB6 — PORTB bit 6 (GPIO/AN14/PGC) |
| Контакт 39 | RB7 — PORTB bit 7 (GPIO/AN15/PGD) |
| Контакт 40 | RB8 — PORTB bit 8 (GPIO) |
| Контакт 41 | RB9 — PORTB bit 9 (GPIO) |
| Контакт 42 | RB10 — PORTB bit 10 (GPIO) |
| Контакт 43 | RB11 — PORTB bit 11 (GPIO) |
| Контакт 44 | RB12 — PORTB bit 12 (GPIO) |
| Контакт 45 | RB13 — PORTB bit 13 (GPIO) |
| Контакт 46 | RB14 — PORTB bit 14 (GPIO) |
| Контакт 47 | RB15 — PORTB bit 15 (GPIO) |
| Контакт 48 | VSS — Ground |
| Контакт 49 | VDD — 3.3V supply voltage |
| Контакт 50 | RC0 — PORTC bit 0 (GPIO) |
| Контакт 51 | RC1 — PORTC bit 1 (GPIO) |
| Контакт 52 | RC2 — PORTC bit 2 (GPIO) |
| Контакт 53 | RC3 — PORTC bit 3 (GPIO) |
| Контакт 54 | RC4 — PORTC bit 4 (GPIO) |
| Контакт 55 | RC5 — PORTC bit 5 (GPIO) |
| Контакт 56 | RC6 — PORTC bit 6 (GPIO) |
| Контакт 57 | RC7 — PORTC bit 7 (GPIO) |
| Контакт 58 | RC8 — PORTC bit 8 (GPIO) |
| Контакт 59 | RC9 — PORTC bit 9 (GPIO) |
| Контакт 60 | RC10 — PORTC bit 10 (GPIO) |
| Контакт 61 | RC11 — PORTC bit 11 (GPIO) |
| Контакт 62 | RC12 — PORTC bit 12 (GPIO) |
| Контакт 63 | RC13 — PORTC bit 13 (GPIO) |
| Контакт 64 | RC14 — PORTC bit 14 (GPIO) |
| Контакт 65 | RC15 — PORTC bit 15 (GPIO) |
| Контакт 66 | VSS — Ground |
| Контакт 67 | VDD — 3.3V supply voltage |
| Контакт 68 | RD0 — PORTD bit 0 (GPIO) |
| Контакт 69 | RD1 — PORTD bit 1 (GPIO) |
| Контакт 70 | RD2 — PORTD bit 2 (GPIO) |
| Контакт 71 | RD3 — PORTD bit 3 (GPIO) |
| Контакт 72 | RD4 — PORTD bit 4 (GPIO) |
| Контакт 73 | RD5 — PORTD bit 5 (GPIO) |
| Контакт 74 | RD6 — PORTD bit 6 (GPIO) |
| Контакт 75 | RD7 — PORTD bit 7 (GPIO) |
| Контакт 76 | RD8 — PORTD bit 8 (GPIO) |
| Контакт 77 | RD9 — PORTD bit 9 (GPIO) |
| Контакт 78 | RD10 — PORTD bit 10 (GPIO) |
| Контакт 79 | RD11 — PORTD bit 11 (GPIO) |
| Контакт 80 | RD12 — PORTD bit 12 (GPIO) |
| Контакт 81 | RD13 — PORTD bit 13 (GPIO) |
| Контакт 82 | RD14 — PORTD bit 14 (GPIO) |
| Контакт 83 | RD15 — PORTD bit 15 (GPIO) |
| Контакт 84 | VSS — Ground |
| Контакт 85 | VDD — 3.3V supply voltage |
| Контакт 86 | RE0 — PORTE bit 0 (GPIO) |
| Контакт 87 | RE1 — PORTE bit 1 (GPIO) |
| Контакт 88 | RE2 — PORTE bit 2 (GPIO) |
| Контакт 89 | RE3 — PORTE bit 3 (GPIO) |
| Контакт 90 | RE4 — PORTE bit 4 (GPIO) |
| Контакт 91 | RE5 — PORTE bit 5 (GPIO) |
| Контакт 92 | RE6 — PORTE bit 6 (GPIO) |
| Контакт 93 | RE7 — PORTE bit 7 (GPIO) |
| Контакт 94 | VSS — Ground |
| Контакт 95 | VDD — 3.3V supply voltage |
| Контакт 96 | RF0 — PORTF bit 0 (GPIO) |
| Контакт 97 | RF1 — PORTF bit 1 (GPIO) |
| Контакт 98 | RF2 — PORTF bit 2 (GPIO) |
| Контакт 99 | RF3 — PORTF bit 3 (GPIO) |
| Контакт 100 | RF4 — PORTF bit 4 (GPIO) |
Типичное применение
PIC32MZ1024ECM100T-I/PT подходит для 7 применениеs: Industrial Ethernet Gateway, Building Automation Controller, Audio Processing with I2S Codec, CAN-Connected Automotive Body ECU, Graphical HMI Front Panel, Motor Control Drive, IoT Edge Sensor Node.
Industrial Ethernet Gateway
The PIC32MZ1024ECM100T-I/PT's integrated 10/100 Ethernet MAC with RMII/MII interface, combined with the on-chip crypto engine and 1 MB Flash, makes it a natural fit for industrial protocol-conversion gateways. Engineers typically pair the EC variant with an external PHY such as the KSZ8081 and run a TLS 1.2 lightweight web server in the 256 KB SRAM. The 200 MHz microAptiv core sustains sub-second HTTPS handshakes while the dedicated DMA channels offload Ethernet packet movement, leaving CPU headroom for CAN-to-Ethernet bridging in Modbus TCP or EtherNet/IP stacks. The MMU enables optional embedded Linux or RTOS hosting for complex fieldbus routers.
Рекомендуется
Building Automation Controller
In building automation, the PIC32MZ1024ECM100T-I/PT serves as a multi-protocol controller bridging BACnet, KNX, Modbus, and LonWorks segments. The 100-pin TQFP exposes four UART channels, two I2C buses, two SPI/I2S ports, plus the CAN interface - enough for simultaneous fieldbus communication and supervisor uplink. The 1 MB Flash stores protocol stacks, scheduling logic, and over-the-air firmware update images; dual-panel Flash allows Live Update during maintenance windows. Operating from -40C to +85C industrial range, the device handles rooftop and basement equipment enclosures without derating.
Рекомендуется
Audio Processing with I2S Codec
The PIC32MZ1024ECM100T-I/PT's SPI/I2S interfaces and DSP-extended microAptiv core support 16-bit and 24-bit audio at 48 kHz with low-latency mixing or filtering. Designers commonly pair the MCU with a stereo codec such as the CS4344 or TLV320AIC23B for consumer audio docks and intercom panels. The four 64-bit accumulators and single-cycle MAC accelerate biquad filters and FFT-based audio processing. With 256 KB SRAM, ping-pong DMA buffers across the I2S streams stay under 32 KB, leaving plenty of headroom for an RTOS scheduler or USB Audio class stack.
Рекомендуется
CAN-Connected Automotive Body ECU
In automotive body and chassis ECUs, the PIC32MZ1024ECM100T-I/PT integrates CAN 2.0B, LIN via UART, and PWM channels for body control modules such as body controllers, seat controllers, and lighting drivers. Designers use the 10-bit 500 KSPS ADC for sensor inputs and the parallel master port (PMP) for LED matrix or character LCD HMI. The industrial -40C to +85C temperature grade suits cabin environments; for under-hood applications, the E-grade PIC32MZ1024ECM100T-E/PT variant extends operation to +125C. The 1 MB Flash stores network management and UDS diagnostic stacks.
Рекомендуется
Graphical HMI Front Panel
The PIC32MZ1024ECM100T-I/PT's parallel master port (PMP) interface drives character LCDs and small TFT displays up to 480x272 resolution with external controller. The 200 MHz core runs Microchip's Harmony Graphics Suite, providing anti-aliased fonts, image decoders, and touch-screen widgets for industrial HMI panels. Designers typically pair the MCU with a 4.3-inch TFT driven by an SSD1963 controller and a resistive touch controller such as the AR1021. The 100-pin TQFP provides enough GPIO for backlight PWM, buzzer, and rotary encoder inputs.
Рекомендуется
Motor Control Drive
The PIC32MZ1024ECM100T-I/PT's PWM outputs, 10-bit 500 KSPS ADC with 40 channels, and DSP-extended microAptiv core support sensorless and sensored FOC motor control up to several kW. Designers use the PWM module to drive a three-phase inverter through gate drivers such as the MCP8026, while the ADC samples phase currents synchronized to the PWM period for closed-loop torque control. The DSP accumulators and single-cycle MAC accelerate Park/Clarke transforms. The 1 MB Flash stores field-weakening and MTPA algorithms without needing external memory, and CAN enables integration into broader vehicle or industrial networks.
Рекомендуется
IoT Edge Sensor Node
For IoT edge sensor nodes, the PIC32MZ1024ECM100T-I/PT runs Microchip's Harmony TCP/IP stack and TLS library on the integrated Ethernet MAC, while the crypto engine accelerates AES-128 and SHA-256 handshakes. The 256 KB SRAM handles MQTT publish buffers and JSON serialization without external memory. Designers add Wi-Fi via a co-processor such as the ATWINC1500 or sub-GHz via the MRF89XA for wireless variants. The microMIPS compressed instruction mode keeps code size 35% smaller, freeing Flash for over-the-air update staging areas.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC32MZ1024ECM100T-I/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC32MZ1024ECM100-I/PT | PIC32MZ1024ECM100T-I/PF | PIC32MZ1024ECM100T-E/PT | PIC32MZ1024ECH100T-I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (12x12 mm) | TQFP-100 (12x12 mm) | TQFP-100 (14x14 mm) | TQFP-100 (12x12 mm) | TQFP-100 (12x12 mm) |
| Core | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv |
| Max Clock | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 256 KB | 256 KB | 256 KB | 256 KB | 512 KB |
| Temperature Grade | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) |
| Ethernet MAC | Yes | Yes | Yes | Yes | Yes |
| Crypto Engine | Yes | Yes | Yes | Yes | Yes |
| Supply Voltage | 2.3V to 3.6V | 2.3V to 3.6V | 2.3V to 3.6V | 2.3V to 3.6V | 2.3V to 3.6V |
Ключевые отличия
- Integrated Ethernet MAC plus on-chip crypto engine in TQFP-100 (против PIC32MX795F512L-80I/PT)
- Dual-panel Flash enables Live Update field upgrades (против PIC32MX470F512LT-I/PT)
- 200 MHz microAptiv core with DSP extensions (против PIC32MX575F512H-80V/PT)
- 100-pin TQFP available in two footprints (12x12 PT and 14x14 PF) (против PIC32MZ1024ECM064T-I/PT)
Заметки по проектированию
The PIC32MZ1024ECM100T-I/PT requires careful decoupling per Microchip AN583: place one 100 nF X7R 0402 capacitor adjacent to every VDD pin, with vias to the inner ground plane. Add a single 4.7 uF X5R bulk capacitor near the package. The internal LDO generates the 1.2V core domain; do not exceed 3.6V on any VDD pin or latch-up may occur. For noise-sensitive applications, add a ferrite bead between the 3.3V regulator and the MCU supply rail to suppress switching-noise coupling from Ethernet PHY or external memory.
Route the 50 MHz RMII or 125 MHz RGMII Ethernet signals first with matched 50 ohm controlled impedance and length matching within 50 mils between clock and data pairs. Place the Ethernet PHY within 50 mm of the MCU to keep the RMII traces short. Provide a continuous ground reference plane under all Ethernet signals - split planes under the MCU will degrade signal integrity and increase EMI. The 100-pin TQFP-100 (12x12 mm) package requires 0.4 mm pitch traces; use 0.2 mm traces with 0.2 mm spacing minimum.
Estimated: At 200 MHz CPU clock with all peripherals active, core current draw is approximately 90 mA at 1.2V (108 mW) plus I/O current. Total power dissipation is typically 250 mW, well below the 1 W TQFP-100 thermal limit. No heatsink required for industrial applications. However, in enclosed IP65 enclosures with +85C ambient, verify junction temperature using theta_JA = 41.4 C/W for the TQFP-100 (PT) package per Microchip package thermal data. If junction exceeds +125C, add thermal vias under the exposed pad or reduce clock frequency.
Always configure unused pins as digital outputs (not inputs) to minimize supply current and reduce EMI susceptibility. Do not leave JTAG pins floating - add 10 kohm pull-ups to PGECx/PGEDx or disable JTAG in firmware configuration bits. When using the Ethernet MAC, ensure the 50 MHz RMII reference clock source is stable before the PHY is released from reset, or the link will fail to come up. Finally, program the configuration bits for the correct oscillator mode (HS or EC) before the first flash erase, otherwise the MCU may brick.
Place the 8 MHz primary crystal within 5 mm of the OSC1/OSC2 pins with a grounded guard ring to reduce stray capacitance. Add 10 ohm series resistors between the MCU pins and the Ethernet PHY TX clock if signal integrity issues are observed. For USB applications, route the D+/D- pair as a 90 ohm differential with length matching within 2 mm and keep total length under 50 mm to stay within USB 2.0 specifications.
Информация о соответствии
RoHS and REACH compliant per Microchip product page declarations. Not AEC-Q100 qualified - choose PIC32MX or PIC32MK families for AEC-Q100 automotive applications. Lead-free and halogen-free packaging.
