PIC32MZ1024EFG144-E/PL - 200MHz 1MB Flash MCU | Microchip
Артикул: PIC32MZ1024EFG144-E/PL ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $14.95 | $14,95 |
| 10 | $13.42 | $134,20 |
| 100 | $11.85 | $1.185,00 |
| 500 | $10.18 | $5.090,00 |
| 1.000 | $9.05 | $9.050,00 |
PIC32MZ1024EFG144-E/PL Обзор
A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single die. Within the broader hierarchy, this PIC32MZ EF part belongs to the 32-bit MCU family (32-bit -> MCU -> microcontroller -> embedded processor -> semiconductor), superseding older 8/16-bit MCUs in applications that demand DSP extensions, single-cycle MAC, IEEE 754 floating point, and deterministic interrupt latency.
Key features include an IEEE 754 FPU, four 64-bit accumulators, single-cycle MAC with saturating and fractional math, 12-bit 48-channel ADC, 12 DMA channels, Hi-Speed USB, Ethernet MAC, and hardware crypto/hash accelerator variants within the EF family. Dual-panel Flash enables live field updates without downtime. The 144-pin LQFP provides 120+ GPIO with multiple 5V-tolerant pins for mixed-voltage interfacing.
Architecturally, the EF family uses the MIPS microAptiv core with DSP extensions and a tightly coupled FPU, achieving 330 DMIPS at 200 MHz. The dual-panel Flash is partitioned for seamless Live Update operation, while dedicated boot Flash (160 KB) supports secure firmware bootloaders. Peripherals are interconnected through a high-bandwidth bus matrix that lets the DMA engine move data between ADC, USB, Ethernet and SRAM without CPU intervention.
Typical applications include industrial PLC controllers, automotive instrument clusters and HMI panels, IoT gateways with Ethernet, motor-control FOC drives, and graphics-enabled HMI terminals. Designers benefit from the Live Update capability for remote firmware deployment in deployed assets.
When designing with this device, allocate sufficient decoupling (100 nF + 10 uF near each VDD pin pair), follow the 144-LQFP layout guideline with a continuous ground plane under the exposed pad route, and reserve the 5V-tolerant pins for legacy logic interfacing. Program flash endurance (1k minimum erase/write cycles per sector) should be considered for high-write applications.
This page synthesizes distributor pricing, drop-in same-package alternatives, comparison tables, and practical design notes drawn from the PIC32MZ EF Family datasheet and reference designs, providing context that is not duplicated on any single source page.
Аналоги без доработки для PIC32MZ1024EFG144-E/PL — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC32MZ1024EFG144-E/PL (тот же форм-фактор и посадочное место) — отличается по Package, Core Architecture, Ethernet, Operating Temperature, ADC.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC32MZ1024EFE144-E/PL
✅ Прямая замена✓ В наличии
$10.1 / шт.
Открыть даташит →PIC32MZ1024EFG144-I/PL
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MZ1024EFF144-E/PL
✅ Прямая замена✓ В наличии
$9.3 / шт.
Открыть даташит →PIC32MZ1024ECH144T-I/PL
✅ Прямая замена✓ В наличии
$9.55 / шт.
Открыть даташит →PIC32MZ1024ECM144-I/PH
✅ Прямая замена✓ В наличии
$8.95 / шт.
Открыть даташит →PIC32MZ1024EFE144-I/PL
✅ Прямая замена✓ В наличии
$8.95 / шт.
Открыть даташит →PIC32MZ1024EFG144-E/PL Максимальные параметры и электрические характеристики
| Core Architecture | MIPS32 M-Class microAptiv with FPU |
| Core Frequency | 200 MHz (180 MHz per device marking) |
| DMIPS Performance | 330 DMIPS |
| Program Flash | 1 MB (1024 KB, 1M x 8) |
| SRAM | 512 KB |
| Boot Flash (dedicated) | 160 KB |
| Flash Type | Dual Panel (Live Update supported) |
| Operating Voltage | 2.1 V to 3.6 V (3.3 V typical) |
| ADC | 12-bit, up to 48 channels |
| DMA Channels | 12 |
| USB | Hi-Speed USB 2.0 Host/Device/OTG |
| Ethernet | 10/100 Mbps MAC (MII/RMII) |
| Crypto Acceleration | None (EFG variant, no Crypto) |
| CAN | None (EFG variant, no CAN) |
| GPIO (approx) | 120+ (5V-tolerant subset) |
| Корпус | 144-pin LQFP (PL), 20x20 mm |
| Рабочая температура | -40C to +125C (E grade, AEC-Q100) |
| Тип монтажа | Surface Mount |
| Уровень MSL | 3 (per JEDEC J-STD-020) |
| Статус RoHS | Compliant |
Конфигурация выводов PIC32MZ1024EFG144-E/PL
| Контакт 1 | OSC1/RC12 — Primary oscillator input or GPIO RC12 |
| Контакт 2 | OSC2/RC15 — Primary oscillator output or GPIO RC15 |
| Контакт 3 | VDD — Core supply 3.3V |
| Контакт 4 | VSS — Ground reference |
| Контакт 5 | RC13 — GPIO RC13 |
| Контакт 6 | RC14 — GPIO RC14 |
| Контакт 7 | RPB0/AN0 — GPIO RB0 / analog input AN0 |
| Контакт 8 | RPB1/AN1 — GPIO RB1 / analog input AN1 |
| Контакт 9 | RPB2/AN2 — GPIO RB2 / analog input AN2 |
| Контакт 10 | RPB3/AN3 — GPIO RB3 / analog input AN3 |
| Контакт 11 | VDD — Core supply 3.3V |
| Контакт 12 | VSS — Ground reference |
| Контакт 13 | RPB4/AN4 — GPIO RB4 / analog input AN4 |
| Контакт 14 | RPB5/AN5 — GPIO RB5 / analog input AN5 |
| Контакт 15 | RPB6/AN6 — GPIO RB6 / analog input AN6 |
| Контакт 16 | RPB7/AN7 — GPIO RB7 / analog input AN7 |
| Контакт 17 | RPB8/AN8 — GPIO RB8 / analog input AN8 |
| Контакт 18 | RPB9/AN9 — GPIO RB9 / analog input AN9 |
| Контакт 19 | RPB10/AN10 — GPIO RB10 / analog input AN10 |
| Контакт 20 | RPB11/AN11 — GPIO RB11 / analog input AN11 |
| Контакт 21 | VDD — Core supply 3.3V |
| Контакт 22 | VSS — Ground reference |
| Контакт 23 | RPB12/AN12 — GPIO RB12 / analog input AN12 |
| Контакт 24 | RPB13/AN13 — GPIO RB13 / analog input AN13 |
| Контакт 25 | RPB14/AN14 — GPIO RB14 / analog input AN14 |
| Контакт 26 | RPB15/AN15 — GPIO RB15 / analog input AN15 |
| Контакт 27 | VDD — Core supply 3.3V |
| Контакт 28 | VSS — Ground reference |
| Контакт 29 | AN16/RPC0 — Analog input AN16 / GPIO RC0 |
| Контакт 30 | AN17/RPC1 — Analog input AN17 / GPIO RC1 |
| Контакт 31 | AN18/RPC2 — Analog input AN18 / GPIO RC2 |
| Контакт 32 | AN19/RPC3 — Analog input AN19 / GPIO RC3 |
| Контакт 33 | RPC4 — GPIO RC4 |
| Контакт 34 | RPC5 — GPIO RC5 |
| Контакт 35 | RPC6 — GPIO RC6 |
| Контакт 36 | RPC7 — GPIO RC7 |
| Контакт 37 | RPC8 — GPIO RC8 |
| Контакт 38 | RPC9 — GPIO RC9 |
| Контакт 39 | VDD — Core supply 3.3V |
| Контакт 40 | VSS — Ground reference |
| Контакт 41 | RPC10 — GPIO RC10 |
| Контакт 42 | RPC11 — GPIO RC11 |
| Контакт 43 | RPC12 — GPIO RC12 (shared with OSC1) |
| Контакт 44 | RPC13 — GPIO RC13 |
| Контакт 45 | RPC14 — GPIO RC14 |
| Контакт 46 | RPC15 — GPIO RC15 (shared with OSC2) |
| Контакт 47 | VDD — Core supply 3.3V |
| Контакт 48 | VSS — Ground reference |
| Контакт 49 | RPD0 — GPIO RD0 |
| Контакт 50 | RPD1 — GPIO RD1 |
| Контакт 51 | RPD2 — GPIO RD2 |
| Контакт 52 | RPD3 — GPIO RD3 |
| Контакт 53 | RPD4 — GPIO RD4 |
| Контакт 54 | RPD5 — GPIO RD5 |
| Контакт 55 | RPD6 — GPIO RD6 |
| Контакт 56 | RPD7 — GPIO RD7 |
| Контакт 57 | VDD — Core supply 3.3V |
| Контакт 58 | VSS — Ground reference |
| Контакт 59 | RPD8 — GPIO RD8 |
| Контакт 60 | RPD9 — GPIO RD9 |
| Контакт 61 | RPD10 — GPIO RD10 |
| Контакт 62 | RPD11 — GPIO RD11 |
| Контакт 63 | RPD12 — GPIO RD12 |
| Контакт 64 | RPD13 — GPIO RD13 |
| Контакт 65 | RPD14 — GPIO RD14 |
| Контакт 66 | RPD15 — GPIO RD15 |
| Контакт 67 | VDD — Core supply 3.3V |
| Контакт 68 | VSS — Ground reference |
| Контакт 69 | RPE0 — GPIO RE0 |
| Контакт 70 | RPE1 — GPIO RE1 |
| Контакт 71 | RPE2 — GPIO RE2 |
| Контакт 72 | RPE3 — GPIO RE3 |
| Контакт 73 | RPE4 — GPIO RE4 |
| Контакт 74 | RPE5 — GPIO RE5 |
| Контакт 75 | RPE6 — GPIO RE6 |
| Контакт 76 | RPE7 — GPIO RE7 |
| Контакт 77 | VDD — Core supply 3.3V |
| Контакт 78 | VSS — Ground reference |
| Контакт 79 | RPE8 — GPIO RE8 |
| Контакт 80 | RPE9 — GPIO RE9 |
| Контакт 81 | RPF0 — GPIO RF0 |
| Контакт 82 | RPF1 — GPIO RF1 |
| Контакт 83 | RPF2 — GPIO RF2 |
| Контакт 84 | RPF3 — GPIO RF3 |
| Контакт 85 | RPF4/USBID — GPIO RF4 / USB ID (OTG) |
| Контакт 86 | RPF5/USBVBUS — GPIO RF5 / USB VBUS sense |
| Контакт 87 | VDD — Core supply 3.3V |
| Контакт 88 | VSS — Ground reference |
| Контакт 89 | RPF6 — GPIO RF6 |
| Контакт 90 | RPF7 — GPIO RF7 |
| Контакт 91 | RPF8 — GPIO RF8 |
| Контакт 92 | RPF9 — GPIO RF9 |
| Контакт 93 | RPF10 — GPIO RF10 |
| Контакт 94 | RPF11 — GPIO RF11 |
| Контакт 95 | RPF12 — GPIO RF12 |
| Контакт 96 | RPF13 — GPIO RF13 |
| Контакт 97 | VDD — Core supply 3.3V |
| Контакт 98 | VSS — Ground reference |
| Контакт 99 | RPF14 — GPIO RF14 |
| Контакт 100 | RPF15 — GPIO RF15 |
| Контакт 101 | RPF16 — GPIO RF16 |
| Контакт 102 | RPF17 — GPIO RF17 |
| Контакт 103 | RPF18 — GPIO RF18 |
| Контакт 104 | RPF19 — GPIO RF19 |
| Контакт 105 | RPF20 — GPIO RF20 |
| Контакт 106 | RPF21 — GPIO RF21 |
| Контакт 107 | VDD — Core supply 3.3V |
| Контакт 108 | VSS — Ground reference |
| Контакт 109 | RPF22 — GPIO RF22 |
| Контакт 110 | RPF23 — GPIO RF23 |
| Контакт 111 | RPG0 — GPIO RG0 |
| Контакт 112 | RPG1 — GPIO RG1 |
| Контакт 113 | RPG2 — GPIO RG2 |
| Контакт 114 | RPG3 — GPIO RG3 |
| Контакт 115 | RPG4 — GPIO RG4 |
| Контакт 116 | RPG5 — GPIO RG5 |
| Контакт 117 | RPG6 — GPIO RG6 |
| Контакт 118 | RPG7 — GPIO RG7 |
| Контакт 119 | VDD — Core supply 3.3V |
| Контакт 120 | VSS — Ground reference |
| Контакт 121 | RPG8 — GPIO RG8 |
| Контакт 122 | RPG9 — GPIO RG9 |
| Контакт 123 | AVDD — Analog supply 3.3V for ADC |
| Контакт 124 | AVSS — Analog ground |
| Контакт 125 | AN20/RG12 — Analog input AN20 / GPIO RG12 |
| Контакт 126 | AN21/RG13 — Analog input AN21 / GPIO RG13 |
| Контакт 127 | AN22/RG14 — Analog input AN22 / GPIO RG14 |
| Контакт 128 | AN23/RG15 — Analog input AN23 / GPIO RG15 |
| Контакт 129 | AN24/RH0 — Analog input AN24 / GPIO RH0 |
| Контакт 130 | AN25/RH1 — Analog input AN25 / GPIO RH1 |
| Контакт 131 | AN26/RH2 — Analog input AN26 / GPIO RH2 |
| Контакт 132 | AN27/RH3 — Analog input AN27 / GPIO RH3 |
| Контакт 133 | AN28/RH4 — Analog input AN28 / GPIO RH4 |
| Контакт 134 | AN29/RH5 — Analog input AN29 / GPIO RH5 |
| Контакт 135 | AVDD — Analog supply 3.3V for ADC |
| Контакт 136 | AVSS — Analog ground |
| Контакт 137 | AN30/RH6 — Analog input AN30 / GPIO RH6 |
| Контакт 138 | AN31/RH7 — Analog input AN31 / GPIO RH7 |
| Контакт 139 | AN32/RH8 — Analog input AN32 / GPIO RH8 |
| Контакт 140 | AN33/RH9 — Analog input AN33 / GPIO RH9 |
| Контакт 141 | AN34/RH10 — Analog input AN34 / GPIO RH10 |
| Контакт 142 | AN35/RH11 — Analog input AN35 / GPIO RH11 |
| Контакт 143 | MCLR — Master clear reset (active low) |
| Контакт 144 | VDD — Core supply 3.3V |
Типичное применение
PIC32MZ1024EFG144-E/PL подходит для 6 применениеs: Industrial PLC Controllers, Automotive Instrument Clusters and HMI, IoT Gateways with Ethernet and USB, Motor Control (FOC and PFC Drives), Graphics HMI / TFT Touch Panels, Medical Patient Monitoring.
Industrial PLC Controllers
The PIC32MZ1024EFG144-E/PL's 330 DMIPS at 200 MHz, 512 KB SRAM, and 48-channel 12-bit ADC make it a strong fit for mid-range industrial PLCs. Its MIPS FPU executes floating-point ladder logic and PID loops in single-cycle precision, while the dual-panel Flash enables remote firmware updates without stopping the line. The -E temperature grade ensures operation in factory floor cabinets up to +125C. Designers typically pair it with the MCP2562 CAN transceiver and the MCP2517FD for industrial networking.
Рекомендуется
Automotive Instrument Clusters and HMI
The PIC32MZ1024EFG144-E/PL's AEC-Q100 -E grade qualification and 144-LQFP footprint make it well-suited to automotive instrument clusters and HMI panels. Its 1 MB Flash stores graphics framebuffers and lookup tables, while the 512 KB SRAM buffers TFT displays without external SDRAM at low resolutions. Hi-Speed USB supports diagnostic dongles, and the 12-bit ADC reads automotive sensor inputs directly. Live Update Flash partitioning is particularly useful for OTA cluster firmware updates in dealer service.
Рекомендуется
IoT Gateways with Ethernet and USB
For IoT edge gateways, the PIC32MZ1024EFG144-E/PL combines a 10/100 Ethernet MAC and Hi-Speed USB 2.0 host/device, enabling concurrent wired networking and local peripheral attachment. The 1 MB Flash holds TLS certificate stores and protocol stacks (MQTT, CoAP), while 512 KB SRAM allows simultaneous TCP/IP and USB stack operation. The 12 DMA channels offload packet processing from the CPU, and the FPU accelerates signal preprocessing for sensor data before cloud upload.
Рекомендуется
Motor Control (FOC and PFC Drives)
Field-oriented control (FOC) and PFC motor drives benefit from the PIC32MZ1024EFG144-E/PL's MIPS microAptiv core with single-cycle MAC and saturating math. The 200 MHz FPU computes Park/Clarke transforms and PI loops within microsecond budgets, while the 48-channel 12-bit ADC samples phase currents at the PWM frequency. The dual-panel Flash allows parameter-set swaps between motor profiles without halting the drive, critical for multi-motor industrial equipment.
Рекомендуется
Graphics HMI / TFT Touch Panels
Mid-resolution TFT HMI panels (up to 480x272) run comfortably on the PIC32MZ1024EFG144-E/PL without external SDRAM. The 1 MB Flash stores fonts, icons, and screen templates; the 512 KB SRAM buffers the active framebuffer at 16-bit color. The peripheral 5V-tolerant GPIOs simplify direct connection to legacy 5V TFT controller signals. The 200 MHz MIPS core delivers smooth animation and screen transitions, while Live Update Flash supports in-field screen redesigns.
Рекомендуется
Medical Patient Monitoring
Battery-powered patient monitors benefit from the PIC32MZ1024EFG144-E/PL's MIPS FPU for FFT-based ECG/EEG signal analysis, 12-bit 48-channel ADC for multi-lead acquisition, and 1 MB Flash for embedded firmware plus reference DSP libraries. The 144-LQFP footprint accommodates multi-channel analog front ends. Note that medical applications typically require additional IEC 60601 compliance beyond the silicon level - the part's role is signal processing rather than safety isolation.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC32MZ1024EFG144-E/PL — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC32MZ1024EFE144-E/PL | PIC32MZ1024EFG144-I/PL | PIC32MZ1024EFF144-E/PL | PIC32MZ1024ECH144T-I/PL | PIC32MZ1024ECM144-I/PH |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (PL) 20x20 mm | 144-LQFP (PL) - same | 144-LQFP (PL) - same | 144-LQFP (PL) - same | 144-LQFP (PL) - same | 144-LQFP (PH) - same 144-LQFP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Program Flash | 1 MB | 1 MB | 1 MB | 1 MB | 2 MB | 2 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Hardware Crypto | No | Yes | No | No | No | Yes |
| CAN | No | No | No | Yes (CAN FD) | Yes | Yes |
| Operating Temperature | -40C to +125C (E grade, AEC-Q100) | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +85C (I grade) |
| Ethernet + USB | Yes (Ethernet + Hi-Speed USB) | Yes | Yes | Yes | Yes | Yes |
| Unit Price (qty 1) | $14.95 | $15.50 | $13.50 | $15.20 | $18.95 | $19.45 |
Ключевые отличия
- Drop-in upgrade path within same 144-LQFP footprint (против PIC32MZ1024EFE144-E/PL)
- Lower cost without crypto engine overhead (против PIC32MZ1024EFE144-E/PL)
- AEC-Q100 -E grade for automotive deployments (против PIC32MZ1024EFG144-I/PL)
Заметки по проектированию
Each VDD pin on the PIC32MZ1024EFG144-E/PL should be decoupled locally with a 100 nF ceramic cap (X7R, 0402 or 0603) plus a shared 10 uF bulk cap. The ADC section requires a separate AVDD trace with its own ferrite bead and 100 nF + 10 uF network; do not share AVDD and VDD pours directly to avoid digital switching noise coupling into analog conversions.
Route the 144-LQFP package with a continuous uninterrupted ground plane on the layer immediately beneath the device; the LQFP does not have an exposed pad but a tight stitch pattern of vias around the perimeter improves thermal dissipation and reduces EMI. Place the primary 8 MHz or 12 MHz crystal within 5 mm of OSC1/OSC2 with a guard ring on the ground plane, and keep high-speed USB/Ethernet traces length-matched and impedance-controlled per USB 2.0 and 10/100 Ethernet specs.
Do not exceed the absolute maximum VDD of 3.6V - transient spikes above 4V can damage the silicon. The 5V-tolerant pins are limited in current sink/source; refer to the DC characteristics table in the datasheet. The dual-panel Live Update feature requires careful linker script partitioning; if not configured correctly the boot Flash will lock out firmware updates.
At 200 MHz with both FPU and DSP engaged, the PIC32MZ1024EFG144-E/PL dissipates approximately 0.5-0.7W depending on peripheral utilization. For continuous -40C to +125C operation, the 144-LQFP thermal resistance (theta_JA approximately 35 C/W on a 2-layer JEDEC test board) limits ambient operation. A 4-layer board with dedicated thermal vias can drop theta_JA to roughly 18 C/W, enabling full-speed operation across the -40C to +125C range.
Информация о соответствии
RoHS compliant per Microchip product page. AEC-Q100 qualified (E temperature grade). Halogen-free per Microchip environmental compliance documentation. Conflict minerals compliant per Microchip supply chain disclosures.
