R5F10BGCLFB#V5 16-Bit RL78/F13 MCU | Renesas Electronics
Артикул: R5F10BGCLFB#V5 ✗ Снят с производстваR5F10BGCLFB#V5 Обзор
A microcontroller is an integrated circuit that combines a processor core, nonvolatile program memory, working memory, peripherals, and communication interfaces on one semiconductor device. The RL78/F13 belongs to the hierarchy of 16-bit microcontrollers, embedded processors, and integrated circuits used in control-oriented systems. Compared with a general-purpose processor, this device emphasizes deterministic low-power operation, compact embedded control, and dedicated automotive network interfaces.
The RL78/F13 family is positioned as a successor to the 78K0R and R8C families and is available across multiple pin, flash-memory, and interface configurations. According to the Renesas product-page excerpt for related members of this family, the controllers provide a 16 KB to 128 KB flash-memory lineup and emphasize very low consumption current. Specificators for the R5F10BGCLFB#V5 include a built-in CAN module, a LIN module, RAM ECC, PLL-lock detection, port-output-state monitoring, and stack-related functional-safety functions.
For automotive networking, the integrated CAN and LIN blocks reduce the external interface count needed for a body-control or gateway design. RAM ECC improves confidence in data integrity by detecting errors in working memory, while PLL-lock and port-output monitoring help the firmware diagnose clock or output-state faults. These features make the controller useful where low consumption, network participation, and functional-safety diagnostics matter more than application-processing throughput.
Typical uses include body-control modules, automotive communication gateways, sensor-hub controllers, actuator-control electronics, instrument subsystems, and low-power industrial network nodes. In these systems, the MCU can combine sensor acquisition, local control logic, diagnostic handling, and CAN or LIN communication in one device. A system requiring high-resolution graphics, large data storage, or intensive arithmetic may be better served by a more capable processor.
The 48-pin LFQFP package provides enough I/O and interface connectivity for a vehicle subnetwork while supporting conventional PCB assembly. Designers should verify the exact pin assignments, exposed-pad requirements, decoupling network, clock configuration, and programming procedure against the manufacturer datasheet before layout release. Adequate input/output filtering and CAN or LIN transceiver integration also depend on the vehicle network architecture.
This page combines the target identifier, lifecycle information, family-level capabilities, package classification, source links, and qualified replacement analysis for faster engineering review. It also identifies where the exact suffix-specific electrical and memory parameters must be confirmed in the Renesas documentation.
Аналоги без доработки для R5F10BGCLFB#V5 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с R5F10BGCLFB#V5 (тот же форм-фактор и посадочное место) — отличается по PLL Lock Function, Package, Product Type.
R5F10BGCLFB#X5
✅ Прямая заменаУточнить цену
Открыть даташит →R5F10BGCLFB#H5
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
R5F10BGFLFB#V5
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
R5F10ALCLFB#V5
✅ Прямая заменаУточнить цену
Открыть даташит →R5F10BGCLFB#V5 Максимальные параметры и электрические характеристики
| Product Type | 16-bit microcontroller |
| Product Family | RL78/F13 |
| Target MPN | R5F10BGCLFB#V5 |
| Core Architecture | RL78 16-bit core |
| CAN Interface | Built-in CAN module |
| LIN Interface | Built-in LIN module |
| RAM Error Correction | RAM ECC function |
| PLL Lock Function | Supported |
| Port Output State Monitoring | Supported |
| Корпус | 48-pin LFQFP |
| Тип монтажа | Surface mount |
| Статус жизненного цикла | Obsolete |
Руководство по цоколевке R5F10BGCLFB#V5 в корпусе 48-pin lfqfp
Цоколевка для R5F10BGCLFB#V5 (корпус 48-pin lfqfp). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для R5F10BGCLFB#V5.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
R5F10BGCLFB#V5 подходит для 6 применениеs: Automotive Body Control Module, CAN and LIN Vehicle Gateway, Automotive Sensor Hub, Actuator Control Electronics, Instrument and Indicator Cluster Controller, Industrial Network Sensor Node.
Automotive Body Control Module
The Renesas Electronics R5F10BGCLFB#V5 fits a body-control module because the RL78/F13 architecture combines low-consumption 16-bit control with integrated CAN and LIN communication. These interfaces let one controller manage switches, inputs, indicators, and distributed vehicle nodes without requiring a separate communications controller for each network. RAM ECC, PLL-lock detection, and port-output-state monitoring add diagnostic capability for automotive firmware operating across changing supply and clock conditions. The 48-pin LFQFP also provides a conventional surface-mount assembly option for compact electronic control units. Before schematic release, verify the exact target flash and RAM sizes, complete peripheral set, pin multiplexing, operating-temperature limits, and exposed-pad requirements in the Renesas RL78/F13 documentation.
Рекомендуется
CAN and LIN Vehicle Gateway
The R5F10BGCLFB#V5 is appropriate for a CAN-to-LIN gateway where a single low-power microcontroller must terminate two automotive serial networks and translate messages. Its built-in CAN module and LIN module directly address the communication roles that determine gateway compatibility, while the RL78 16-bit core can handle protocol state, routing tables, diagnostics, and fault handling. The family also includes RAM ECC and PLL-lock functions that support dependable operation in electrically variable environments. Because the target is obsolete, a replacement program must check protocol peripheral availability, pin assignment, clock requirements, and firmware timing. Use the exact manufacturer pin and peripheral tables to determine whether the CAN and LIN functions require dedicated external transceivers.
Рекомендуется
Automotive Sensor Hub
The R5F10BGCLFB#V5 can serve as a distributed sensor hub that acquires digital or analog sensor information, applies local filtering, and forwards results over CAN or LIN. Its low-consumption RL78/F13 positioning is valuable in vehicle networks where many remote nodes must operate for extended periods under a constrained energy budget. The MCU can also monitor digital inputs, control discrete outputs, and implement diagnostics alongside the communication protocol. RAM ECC is particularly relevant when retaining calibration or diagnostic information, while port-output-state monitoring helps software detect unexpected actuator or indicator states. Final design work should confirm the target ADC resolution, timer resources, input counts, flash capacity, RAM capacity, and suffix-specific temperature range rather than relying on family-level generalizations.
Рекомендуется
Actuator Control Electronics
The Renesas Electronics R5F10BGCLFB#V5 is suitable for actuator-control electronics that require deterministic embedded logic, automotive network communication, and low standby consumption. Timers and general-purpose I/O can support motor valves, pumps, relays, locks, or indicators, while CAN or LIN provides command reception and status reporting to a higher-level controller. Integrated RAM ECC, PLL-lock detection, and port-output-state monitoring are useful diagnostic resources in systems where an incorrect output could affect vehicle operation. The obsolete lifecycle status makes careful replacement qualification especially important: compare pin mapping, timer channels, communication features, memory size, supply limits, and temperature grade. A same-package replacement should not be approved until the exact Renesas ordering code and its suffix-specific requirements have been reviewed.
Рекомендуется
Instrument and Indicator Cluster Controller
The R5F10BGCLFB#V5 can coordinate switches, warning indicators, and display-related I/O in a vehicle instrument or indicator subsystem. The RL78/F13 core provides the compact embedded-control foundation, while CAN and LIN allow the cluster to receive vehicle information and communicate with distributed switches or sensors. Low-consumption operation supports systems that spend substantial time in a standby state, and RAM ECC can protect retained configuration or diagnostic data. Port-output-state monitoring is useful when software must confirm that an indicator or relay has reached the commanded state. Before implementation, verify the number and electrical characteristics of usable I/O pins, display-interface resources, memory requirements, clock configuration, and package routing. A replacement assessment must also include indicator timing and communication regression tests.
Рекомендуется
Industrial Network Sensor Node
The R5F10BGCLFB#V5 is also relevant to industrial sensor nodes that need a small, low-power controller with integrated serial networking. CAN and LIN can connect the node to machinery, vehicles, or service equipment, while local firmware performs acquisition, thresholding, filtering, and fault reporting. The RL78/F13 family's low-consumption emphasis can help manage standby energy in widely distributed installations, and RAM ECC adds a useful layer of data-integrity protection. Since the target is obsolete, engineers should verify that the replacement retains every required peripheral, memory block, and pin function rather than assuming that all RL78/F13 members are interchangeable. Pay particular attention to operating-temperature grade, ADC performance, timer resources, communication timing, and any calibration data that is embedded in application firmware.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для R5F10BGCLFB#V5 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | R5F10BGCLFB#X5 | R5F10BGCLFB#H5 | R5F10BGFLFB#V5 | R5F10ALCLFB#V5 |
|---|---|---|---|---|---|
| Package | 48-pin LFQFP | 48-pin LFQFP | 48-pin LFQFP | 48-pin LFQFP | 48-pin LFQFP |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Product Family | RL78/F13 | RL78/F13 | RL78/F13 | RL78/F13 | RL78/F13 |
| CPU Architecture | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 |
Ключевые отличия
- Directly identified legacy availability target (против R5F10BGCLFB#X5)
- Automotive communication integration (против R5F10ALCLFB#V5)
- Functional-safety diagnostic resource set (против R5F10BGFLFB#V5)
- Compact 48-pin integration (против R5F10BGCLFB#H5)
Заметки по проектированию
Treat the ordering suffix as part of the component identity. R5F10BGCLFB#V5, R5F10BGCLFB#X5, and R5F10BGCLFB#H5 share a recognizable base code but must not be assumed to be electrically or qualification-identical. Before substitution, compare the decoded suffix, operating-temperature range, flash and RAM capacity, automotive qualification, marking, and any region-specific requirements. Preserve the complete orderable MPN in procurement and production records so an approved variant is not silently substituted.
Assign the 48-pin LFQFP using the manufacturer's package drawing and pin-description table rather than a generic 48-pin diagram. Confirm power and ground connectivity, exposed-pad requirements, decoupling capacitors, programming signals, reset behavior, and every multiplexed peripheral function. Route communication and clock signals according to the datasheet's impedance and return-path guidance, and keep noisy switching nodes away from sensitive inputs. A PCB respin is a substantial risk if a replacement relies on different pin multiplexing.
The RL78/F13 family emphasizes low consumption, but the target's exact operating-voltage range and standby-current limit must be taken from the suffix-specific datasheet. Verify all core, I/O, CAN, LIN, timer, and analog-supply requirements against the design voltage. Follow the manufacturer recommendations for local input and output capacitance, and check brownout behavior before enabling loads. An obsolete replacement must also pass the same voltage, current, and power-sequencing tests as the original device.
For CAN and LIN implementations, separate the MCU interface from the external transceiver and follow the transceiver and board-layout recommendations for each network. Provide correct termination, common-reference strategy, protection, and filtering appropriate to the vehicle environment. Because the integrated communication blocks participate in timing-sensitive protocols, validate oscillator startup, PLL lock, baud-rate tolerance, bus timing, and fault recovery in the assembled system rather than relying only on nominal register settings.
Информация о соответствии
The target is associated with automotive applications, but the available manufacturer snippets do not explicitly state AEC-Q100 qualification, RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for the exact V5 suffix. These fields require confirmation in the manufacturer product or quality documentation.