R5F10BGFKFB#V5 Low-Power 16-Bit MCU | Renesas Electronics
Артикул: R5F10BGFKFB#V5 ✓ АктивенR5F10BGFKFB#V5 Обзор
An MCU is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. It belongs to the embedded-controller hierarchy: microcontroller, embedded controller, and embedded processing semiconductor. Compared with a general-purpose processor, an RL78/F13 MCU places flash, RAM, timers, serial interfaces, analog conversion functions, and low-power controls close to the CPU, reducing board complexity and helping embedded designs achieve deterministic operation.
The R5F10BGFKFB#V5 is associated with the RL78/F13 feature set described by Renesas, including low current consumption, functional-safety capabilities, RAM ECC support, PLL lock detection, and port-output-state monitoring. The 16-bit RL78 architecture is intended for control-oriented workloads where code density, responsive peripherals, and low operating energy are more important than the processing throughput expected from a desktop-class processor.
RL78/F13 family devices are used for automotive interfaces, industrial controls, consumer equipment, and compact embedded products. Family variants provide built-in CAN and LIN functions on selected models, along with timers, communication interfaces, and analog resources for motor, sensing, and communications subsystems. The exact flash size, RAM size, pin count, peripheral set, voltage range, and temperature grade for R5F10BGFKFB#V5 must be confirmed against the ordering-information table in the manufacturer documentation.
A typical implementation places the MCU beside its power regulators, sensor inputs, communication transceivers, and actuator drivers. Designers should preserve the recommended decoupling network, assign every pin according to the package-specific pin table, and validate peripheral multiplexing before finalizing the PCB. Software development can also affect effective energy consumption, so clock configuration, peripheral run states, and low-power transitions should be reviewed together.
This page combines the confirmed RL78/F13 family information with package-specific selection guidance, drop-in candidate analysis, PCB design notes, and a parameter-by-parameter comparison framework. It helps engineers distinguish exact ordering-code differences from true functional alternatives while preventing a package or feature mismatch during redesign.
Аналоги без доработки для R5F10BGFKFB#V5 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
R5F10BGFKFB#X5
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
R5F10BGFKFB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
R5F10BGFKFB#V5 Максимальные параметры и электрические характеристики
| Product Type | 16-bit microcontroller |
| Product Series | RL78/F13 |
| Manufacturer | Renesas Electronics |
| CPU Architecture | 16-bit RL78 |
| RAM ECC | Supported by the RL78/F13 family |
| PLL Lock Function | Supported by the RL78/F13 family |
| Port Output State Monitoring | Supported by the RL78/F13 family |
| Functional Safety Features | Specified for the RL78/F13 family |
| Тип монтажа | Surface mount |
| Статус RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Status | unknown |
Руководство по цоколевке R5F10BGFKFB#V5 в корпусе standard
Цоколевка для R5F10BGFKFB#V5 (корпус standard). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для R5F10BGFKFB#V5.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
R5F10BGFKFB#V5 подходит для 6 применениеs: Automotive Interface Control, Industrial Sensor Hub, Motor and Actuator Control, Consumer Appliance Controller, Battery-Powered Remote Sensor Node, CAN and LIN Network Endpoint.
Automotive Interface Control
The Renesas R5F10BGFKFB#V5 is appropriate for compact automotive-interface control blocks that benefit from the RL78/F13 family's low-power design and monitoring functions. Its 16-bit MCU architecture can handle control logic, diagnostic routines, and peripheral coordination without the energy demand of a higher-performance processor. Family features such as RAM ECC, PLL lock detection, port-output-state monitoring, and functional-safety support are useful when the design must detect memory or system-state faults. Before schematic release, engineers should confirm the target's exact CAN, LIN, I/O, voltage, and temperature configuration against the Renesas ordering table.
Рекомендуется
Industrial Sensor Hub
R5F10BGFKFB#V5 can serve as the local controller in an industrial sensor hub that gathers measurements, applies filtering or compensation, and communicates results to a higher-level controller. The RL78/F13 family's 16-bit architecture and low-current emphasis are well suited to continuously powered equipment where long standby intervals and responsive event handling are important. Its timer, serial, and analog capabilities should be matched to the sensor interface and sampling rate. Exact ADC characteristics, communication channels, memory size, and I/O count must be confirmed for R5F10BGFKFB#V5 before final sensor selection.
Рекомендуется
Motor and Actuator Control
The R5F10BGFKFB#V5 is suitable for small motor-control or actuator-control subsystems where deterministic peripheral handling and low system energy are central requirements. An RL78/F13-based design can coordinate timers, pulse-width modulation, position inputs, fault signals, and communications while maintaining a compact embedded footprint. The exact target ordering code must provide the required timer channels, PWM resolution, comparator resources, and operating voltage for the selected motor interface. Prototype validation should include startup behavior, fault detection, thermal performance, and behavior across the full motor-drive supply range.
Рекомендуется
Consumer Appliance Controller
R5F10BGFKFB#V5 fits compact appliance controllers that combine user inputs, sensors, displays, and a low-energy always-on control section. The 16-bit RL78/F13 core supports efficient control-loop execution, while the family's low-power capabilities help reduce standby consumption in appliances that remain connected to mains power. A practical implementation divides sensing, user-interface updates, and motor or relay control among suitable peripherals while leaving time for the MCU to enter a low-current state. The target's pin allocation, memory capacity, display-control resources, and temperature limits must be verified before component selection.
Рекомендуется
Battery-Powered Remote Sensor Node
The R5F10BGFKFB#V5 is a candidate for a battery-powered remote sensor node because the RL78/F13 family emphasizes low current consumption and provides resources for reducing activity during idle periods. The MCU can wake for scheduled measurements, process the result, transmit a compact status update, and return to a low-power state while avoiding a continuously active processor. Energy optimization depends on selecting the correct peripheral clock, disabling unused modules, and using the family's documented low-power modes. Exact sleep currents, wake-up sources, and analog-channel availability must be confirmed for this ordering code.
Рекомендуется
CAN and LIN Network Endpoint
R5F10BGFKFB#V5 can be evaluated for a compact CAN or LIN network endpoint within an RL78/F13-based automotive electronics system. The family's broader portfolio includes devices with built-in CAN and LIN modules, making the RL78/F13 architecture relevant to distributed vehicle networks and interface nodes. However, network-controller availability must be confirmed for the exact GF device rather than inferred from another family member. Selection should account for bus transceiver interface voltage, timing requirements, fault handling, RAM ECC support, watchdog behavior, and the operating-temperature grade associated with R5F10BGFKFB#V5.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для R5F10BGFKFB#V5 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | R5F10BGFKFB#X5 | R5F10BGFKFB |
|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Product Series | RL78/F13 | RL78/F13 | RL78/F13 |
| CPU Architecture | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 |
| RAM ECC | Supported by the RL78/F13 family | Supported by the RL78/F13 family | Supported by the RL78/F13 family |
| Special Ordering Attributes | #V5 ordering suffix | #X5 ordering suffix; grade and packing attributes require confirmation | Base ordering code without #V5 suffix |
Ключевые отличия
- Exact same-base ordering alternative (против R5F10BGFKFB#X5)
- Direct reuse of the GF device architecture (против R5F10BGGKFB#X5)
- Low-power RL78/F13 positioning (против R5F10BGGKFB#X5)
Заметки по проектированию
Resolve the exact R5F10BGFKFB#V5 supply-voltage range before selecting the regulator or level shifters. In a mixed analog and digital design, place the MCU's decoupling capacitors directly beside the relevant power pins, keep the return path continuous, and avoid routing switching-current loops beneath the device. Review which peripherals remain active during standby so unused timers, communication blocks, and converters do not create unnecessary load on the power rail.
Generate the footprint only from the package drawing that matches the full ordering code. Confirm body size, lead span, pin pitch, pin-one orientation, and exposed-pad geometry if present. Because the exact target package is not published in the available product results, do not substitute the 48-pin package shown for the GG device. A mechanical mismatch can prevent assembly even when the electrical device family and software remain compatible.
Assign alternate-function pins only after comparing the schematic against the device-specific pin-description table. Keep oscillator, timer-sensitive, and analog inputs away from high-current switching nodes and noisy communication return paths. If the PCB includes both the MCU and a communications transceiver, place the transceiver at the board edge, keep its return-current path away from sensitive traces, and use a controlled ground reference between the digital and analog sections.
Do not confuse the GF, GG, and FL base codes or treat the final suffix as interchangeable without checking the ordering table. The final characters can affect grade, packing, or traceability even when the base device and pin arrangement appear unchanged. Validate the exact suffix after firmware is complete, ensure any bootloader or programming interface supports the selected ordering code, and record the approved manufacturer part number in production documentation.
Информация о соответствии
The RL78/F13 family is described as including functional-safety features, RAM ECC, PLL lock detection, and port-output-state monitoring. Exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for R5F10BGFKFB#V5 requires confirmation from the manufacturer product page and material declarations.