R5F21103FP#U0 - 16-Bit 16MHz MCU | Renesas Electronics
Артикул: R5F21103FP#U0 ✓ АктивенR5F21103FP#U0 Обзор
A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, working RAM, I/O ports, and peripherals on one integrated circuit. The R8C/Tiny core used here belongs to the broader 16-bit embedded-controller hierarchy. Compared with an 8-bit MCU, its 16-bit architecture supports wider arithmetic and more efficient processing of 16-bit data. The R5F21103FP#U0 also sits within the product hierarchy of flash-based microcontroller ICs, embedded controllers, and general-purpose semiconductor devices.
Key features include a 16 MHz maximum clock, 12 KB of flash memory organized as 12K x 8, and 768 x 8 bits of RAM. The 22 available I/O lines support connections to sensors, indicators, switches, and serial communications equipment. SIO and UART/USART interfaces provide useful options for point-to-point communication, while the LED driver can simplify indicator-control designs. An internal oscillator is specified, and the watchdog timer supports system reliability functions when enabled by the application firmware.
The device is manufactured using a high-performance silicon-gate CMOS process and is based on the R8C/Tiny CPU core, whose instruction set emphasizes instruction efficiency. The supplied operating range of -20°C to +85°C covers industrial and commercial ambient conditions. The 32-pin molded LQFP package provides 22 I/O functions alongside power, ground, clock, programming, reset, and other control connections. Exact pin assignments are not published in the supplied source excerpts, so a verified pinout is not asserted here.
Typical applications include small industrial controllers, serial data-collection terminals, LED status panels, compact control boards, and legacy equipment upgrades where 16-bit processing and serial communication are required. In a UART-based controller, the device can coordinate a local sensor or actuator while the watchdog timer helps detect a stalled software loop. Its 12 KB flash capacity is appropriate for compact control firmware, and 768 x 8 bits of RAM provides working space for variables, buffers, and protocol state.
Designers should confirm clock, reset, programming-interface, and peripheral-pin assignments against the manufacturer datasheet before layout release. The 3 V to 5 V operating range must also be respected, and the PCB should provide clean supply decoupling and programming access. Because this R8C/10 family is supported only for customers that have already adopted the products, new projects should evaluate the manufacturer-recommended RL78/G14 family unless firmware continuity requires the R8C/10 architecture.
This page consolidates verified distributor and manufacturer information, exact memory and package specifications, sourcing guidance, and an explicit assessment of drop-in replacement availability. It also distinguishes documented facts from parameters requiring confirmation, helping engineers evaluate the R5F21103FP#U0 without relying on unsupported substitute claims.
Аналоги без доработки для R5F21103FP#U0 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с R5F21103FP#U0 (тот же форм-фактор и посадочное место) — отличается по Operating Temperature Range, Package, Lead-Free Status, Flash Organization, RAM Size.
R5F21102FP#U0
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →R5F21104FP#U0
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →R5F21103FP#U0 Максимальные параметры и электрические характеристики
| Core Processor | R8C/Tiny Series 16-bit core |
| Product Series | R8C/1x/10 |
| Maximum CPU Frequency | 16 MHz |
| Program Memory Size | 12 KB (12K x 8) |
| Program Memory Type | Flash |
| RAM Size | 768 x 8 bits |
| Number of I/O | 22 |
| Supply Voltage Range | 3 V to 5 V |
| Connectivity | SIO and UART/USART |
| Peripherals | LED driver and watchdog timer |
| Oscillator Type | Internal |
| Core Size | 16-bit |
| Корпус | 32-LQFP (7 x 7 mm) |
| Packaging | Tray |
| Диапазон рабочих температур | -20°C to +85°C (TA) |
| Process Technology | High-performance silicon gate CMOS |
| Lead-Free Status | Pb-Free |
Руководство по цоколевке R5F21103FP#U0 в корпусе 32-lqfp (7 x 7 mm)
Цоколевка для R5F21103FP#U0 (корпус 32-lqfp (7 x 7 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для R5F21103FP#U0.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
R5F21103FP#U0 подходит для 6 применениеs: Serial Data Collection Terminal, Industrial Control Module, LED Status and Indicator Panel, Battery-Powered Sensor Node, Legacy Equipment Upgrade Controller, UART Communication Interface.
Serial Data Collection Terminal
The R5F21103FP#U0 fits a compact data-collection terminal because it combines a 16-bit R8C/Tiny core operating at 16 MHz with 12 KB of flash and 768 x 8 bits of RAM. UART/USART can connect the controller to a sensor, modem, or upstream collector, while 22 I/O lines provide status inputs and alarm outputs. The 3 V to 5 V supply range supports conventional embedded rails, and the watchdog timer can restart a stalled acquisition loop. Before committing a design, verify the exact UART mode, baud-rate range, buffer arrangement, and pin multiplexing in the Renesas datasheet.
Рекомендуется
Industrial Control Module
The R5F21103FP#U0 is applicable to a small industrial control module operating in the specified -20°C to +85°C ambient range. Its 16-bit core and 16 MHz clock provide sufficient control bandwidth for sequencing and status logic, while 22 I/O lines can interface with switches, discrete sensors, and actuator drivers. The internal oscillator simplifies the clock arrangement, and the watchdog timer supports recovery from firmware or peripheral stalls. Because this is a non-promotion R8C/10 family part, long-life programs should first confirm continued Renesas support, availability, and qualification requirements.
Рекомендуется
LED Status and Indicator Panel
The R5F21103FP#U0 suits an LED status panel because its verified peripheral set includes an LED driver alongside 22 general I/O lines. The controller can supervise operating states, scan indicators, and report faults through its serial interface without requiring a separate LED-control IC. Its 12 KB flash supports compact panel firmware, while 768 x 8 bits of RAM can hold display-state and debounce variables. Verify LED-drive current limits, polarity, multiplexing behavior, and timer availability in the manufacturer datasheet; those electrical details were not included in the supplied source excerpts.
Рекомендуется
Battery-Powered Sensor Node
The R5F21103FP#U0 can serve as the controller in a low-to-moderate-power sensor node using its 3 V to 5 V operating range and internal oscillator. UART/USART provides a path to a local sensor or energy-conscious communications module, while the watchdog timer helps recover from unexpected firmware stalls. The 16-bit core can process wider measurement data efficiently, and the 768 x 8-bit RAM avoids requiring a separate memory device for small working sets. Actual sleep currents and wake-up timing were not provided, so battery-life calculations must use the manufacturer datasheet rather than the general processor specification.
Рекомендуется
Legacy Equipment Upgrade Controller
The R5F21103FP#U0 is a logical candidate for a legacy equipment upgrade when an existing control board uses the R8C/1x/10 ecosystem. Its 16-bit core, 16 MHz clock, 12 KB flash, and 768 x 8 bits of RAM preserve the architecture of the original platform, while SIO and UART/USART support existing host links. The 32-LQFP footprint can simplify board-family consolidation if the pin assignment is identical. Do not treat same-package family candidates as automatically interchangeable: compare every pin, peripheral function, interrupt vector, timing range, and firmware dependency against the original device before substitution.
Рекомендуется
UART Communication Interface
The R5F21103FP#U0 can implement a dedicated UART interface because the verified specifications identify UART/USART and SIO connectivity. A 16-bit core at 16 MHz is suitable for framed protocol handling, buffering, and supervisory logic, while the available flash and RAM support compact communication firmware. The 22 I/O lines can expose configuration controls, link-status indicators, or handshake signals in addition to the serial function. Exact baud-rate generation, error detection, interrupt behavior, and whether the serial interface is synchronous or asynchronous must be verified in the manufacturer datasheet before selecting external signal-conditioning components.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для R5F21103FP#U0 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | R5F21102FP#U0 | R5F21104FP#U0 |
|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 32-LQFP (7 x 7 mm) | 32-LQFP (7 x 7 mm) | 32-LQFP (7 x 7 mm) |
| Product Series | R8C/1x/10 | R8C/1x family | R8C/1x family |
| Program Memory Size | 12 KB (12K x 8) | 8 KB; 4 KB lower, a 33% reduction | 16 KB; 4 KB higher, a 33% increase |
Ключевые отличия
- Established 12 KB flash configuration (против R5F21102FP#U0)
- Verified connectivity and peripheral set (против R5F21104FP#U0)
- Compatibility-oriented family choice (против Cross-brand MCU alternatives)
Заметки по проектированию
Design the supply path for the verified 3 V to 5 V operating range and follow the exact decoupling and external-component recommendations in the manufacturer datasheet. Place required input capacitors close to the supply pins and provide a low-impedance ground return. Do not infer regulator topology, quiescent current, or internal voltage tolerances from the distributor summary. If the MCU shares a rail with a noisy actuator or switching converter, isolate the switching path and validate supply ripple and transient response at the device pins.
Reserve the programming connector, reset circuit, clock support, and all unused pins exactly as shown in the current Renesas schematic and pin-assignment material. The supplied excerpts confirm a 32-LQFP package but do not expose the complete pin map, so the footprint and schematic must be checked against the manufacturer drawing rather than inferred from another R8C member. Keep programming and debug access reachable, maintain the package pin-1 orientation, and review unused-pin treatment before fabrication.
Do not substitute a same-package MCU solely because its clock and memory appear similar. The R5F21103FP#U0 is an R8C/1x/10 part, and firmware may depend on its interrupt vectors, peripheral register map, timing behavior, startup code, and exact pin assignments. Renesas states that the R8C/10 group is supported only for customers that have already adopted it and recommends RL78/G14 for new designs. Validate any proposed replacement with the manufacturer cross-reference tool, compiler, linker, timing configuration, and the complete application peripheral set.
Keep UART and SIO routes short, route them away from switching nodes, and provide common-ground return paths appropriate to the interface topology. Although no external crystal is indicated in the supplied data, internal-oscillator accuracy and serial timing must be checked against the required baud-rate tolerance. Add series termination only when the physical interface and driver characteristics require it, and verify connector protection against the actual industrial environment. The supplied material does not specify the exact UART electrical mode or transceiver interface.
Информация о соответствии
The Mouser product listing explicitly identifies the R5F21103FP#U0 as Pb-Free. No verified RoHS, REACH, halogen-free, conflict-minerals, or automotive-qualification statements were included in the supplied data. AEC-Q100 is marked not_applicable because the device is presented as a general commercial microcontroller and no automotive qualification was stated.