R5F64166DFD#U0 - 512KB Flash 16/32-Bit MCU | Renesas
Артикул: R5F64166DFD#U0 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $14.85 | $14,85 |
| 10 | $13.42 | $134,20 |
| 100 | $11.95 | $1.195,00 |
| 500 | $10.75 | $5.375,00 |
| 1.000 | $9.65 | $9.650,00 |
R5F64166DFD#U0 Обзор
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash/ROM), volatile data memory (RAM), and a rich set of peripherals such as timers, communication controllers, ADC/DAC blocks, and general-purpose I/O. The R32C/100 family specifically targets applications that require deterministic real-time control combined with substantial connectivity — it sits within Renesas' broader taxonomy of microcontrollers -> 16/32-bit microcontrollers -> CISC RISC hybrid cores -> automotive/industrial MCU -> embedded control. This hierarchical placement is significant because R32C/100 MCUs share a common M16C/R32C software ecosystem with extensive third-party compiler and debugger support.
Key features include 512 KB Flash memory, 40 KB SRAM, on-chip debug, multiple UART/I2C/SPI interfaces, a 10-bit A/D converter, timers, and interrupt controller. Peripherals such as CAN, EBI/EMI, I2C, and IEBus enable broad connectivity in factory and automotive networks. The 144-LFQFP package offers generous I/O count (over 100 usable pins) for system integration without moving to BGA.
The R32C/100 architecture uses a Harvard-style CISC core with 16-bit fixed-length instructions for code density and 32-bit internal registers for arithmetic performance. Multiply/accumulate support and a built-in DSP-style addressing mode make it suitable for motor-control math, while the on-chip Flash and SRAM provide ample headroom for protocol stacks (CANopen, Modbus) and user application logic on a single chip.
Typical applications include industrial automation controllers, building automation, HVAC control, motor control inverters, factory sensor hubs, and CAN-connected IoT edge nodes. The wide 3.0 V to 5.5 V supply simplifies 5 V industrial bus compatibility, while the industrial temperature range supports outdoor cabinet deployments.
When designing with this MCU, ensure your linker script reserves the upper Flash region for boot code or interrupt vectors, and use the on-chip debugger interface rather than legacy M16C parallel programming. Capacitor selection near VCC/AVCC pins must follow Renesas' decoupling guidance to keep ADC readings clean.
Аналоги без доработки для R5F64166DFD#U0 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
R5F64166PFD#UB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
R5F64165DFD#U0
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
R5F64167DFD#U0
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
R5F64166DFD#U0 Максимальные параметры и электрические характеристики
| Core | R32C/100 (16/32-bit) |
| Core Size | 16/32-Bit |
| Maximum Clock Speed | 50 MHz |
| Program Memory Size | 512 KB (512K x 8) Flash |
| RAM Size | 40 KB |
| Напряжение питания | 3.0 V to 5.5 V |
| Рабочая температура | -40°C to +85°C |
| Корпус | 144-LFQFP (20x20 mm, 0.5 mm pitch) |
| Тип монтажа | Surface Mount |
| Connectivity | EBI/EMI, I2C, IEBus |
| Peripherals | CAN, UART, Timers, ADC, DMA |
| Статус RoHS | Non-Compliant (per GlobalSpec datasheet summary) |
| Lifecycle Stage | Active |
Руководство по цоколевке R5F64166DFD#U0 в корпусе 144-lfqfp (20x20 mm, 0.5 mm pitch)
Цоколевка для R5F64166DFD#U0 (корпус 144-lfqfp (20x20 mm, 0.5 mm pitch)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для R5F64166DFD#U0.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
R5F64166DFD#U0 подходит для 6 применениеs: Industrial Automation Controllers, CAN-Connected Sensor Hubs, HVAC and Building Automation, Motor Control Inverters, Smart Energy Metering, Automotive Body Control Modules.
Industrial Automation Controllers
The R5F64166DFD#U0's 50 MHz R32C/100 core and 512 KB Flash handle PLC scan loops, Modbus stacks, and discrete I/O control without external memory. Its 3.0 V to 5.5 V supply tolerance accepts both 24 V-derived 5 V industrial rails and 3.3 V logic, while the -40°C to +85°C range supports outdoor cabinet mounting. EBI/EMI connectivity allows external SRAM for recipe and log storage.
Рекомендуется
CAN-Connected Sensor Hubs
With its built-in CAN peripheral and 144-LFQFP I/O budget, the R5F64166DFD#U0 acts as a sensor concentrator bridging analog inputs to CANopen or DeviceNet networks. The 10-bit ADC scans multiple analog sensors at deterministic intervals thanks to the R32C/100 DMA controller, while 40 KB RAM buffers CAN frames between bus events. Industrial -40°C to +85°C operation tolerates factory-floor thermal swings.
Рекомендуется
HVAC and Building Automation
The R5F64166DFD#U0's wide 3.0 V to 5.5 V supply accepts 24 VAC-derived DC rails common in HVAC controllers, and the R32C/100 core runs PID loops for damper and valve actuators. UART, I2C, and IEBus connectivity integrate Modbus RTU, BACnet, and proprietary thermostat buses. 512 KB Flash fits BACnet MS/TP protocol plus zone scheduling logic on a single chip.
Рекомендуется
Motor Control Inverters
The R5F64166DFD#U0 delivers enough MIPS at 50 MHz to run field-oriented control (FOC) loops for small BLDC or induction motors, while DSP-style addressing accelerates Park/Clarke transforms. Three-phase PWM timers and the on-chip ADC sample phase currents synchronously, and 512 KB Flash holds lookup tables plus safety state machines. The 144-LFQFP exposed-pad variant (when available) keeps the junction within spec at 1 A I/O drive.
Рекомендуется
Smart Energy Metering
The R5F64166DFD#U0's 10-bit ADC and 50 MHz R32C/100 core implement IEC 62053-compliant metering algorithms, while the 40 KB SRAM buffers 15-minute load profiles for DLMS/COSEM reporting. EBI/EMI expands data storage for black-box event logs, and I2C/IEBus link to display drivers and tamper-detection sensors. Wide supply range survives brown-out events on 5 V metering rails.
Рекомендуется
Automotive Body Control Modules
The R5F64166DFD#U0 powers body controllers for door modules, seat controllers, and lighting nodes where LIN/CAN connectivity multiplexes low-speed switches and LEDs. The -40°C to +85°C industrial temperature range fits cabin and trunk environments, while 512 KB Flash handles multi-MUX debounce, lighting fade tables, and CANopen/CAN FD stacks. Renesas' R32C/100 family heritage simplifies FMEA reviews versus unfamiliar ARM parts.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для R5F64166DFD#U0 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | R5F64166PFD#UB | R5F64165DFD#U0 | R5F64167DFD#U0 |
|---|---|---|---|---|
| Package | 144-LFQFP (20x20) | 144-LFQFP (20x20) - same | 144-LFQFP (20x20) - same | 144-LFQFP (20x20) - same |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Core | R32C/100 (16/32-bit) | R32C/100 (16/32-bit) | R32C/100 (16/32-bit) | R32C/100 (16/32-bit) |
| Clock Speed | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 512 KB | 512 KB | 384 KB | 768 KB |
| RAM | 40 KB | 40 KB | 32 KB | 48 KB |
| Supply Voltage | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Connectivity | EBI/EMI, I2C, IEBus | EBI/EMI, I2C, IEBus | EBI/EMI, I2C, IEBus | EBI/EMI, I2C, IEBus |
| Temperature Range | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
Ключевые отличия
- Same R32C/100 die and footprint as drop-in variants (против R5F64166PFD#UB)
- Larger Flash headroom than R5F64165DFD#U0 (против R5F64165DFD#U0)
- Smaller BOM versus 768 KB variant (против R5F64167DFD#U0)
Заметки по проектированию
The R5F64166DFD#U0 requires a stable 3.0 V to 5.5 V supply; place a 10 µF bulk tantalum or ceramic plus 0.1 µF decoupling cap within 5 mm of each VCC/AVCC pin pair. AVCC must be powered before or simultaneously with VCC to avoid ADC latch-up. A ferrite bead on AVCC reduces digital switching noise coupling into the analog block.
Use a 4-layer PCB with continuous ground plane beneath the 144-LFQFP for best EMI performance; the 0.5 mm pitch demands 4 mil trace width and 4 mil spacing on ENIG finish. Keep crystal traces short (under 5 mm) and surrounded by ground stitching vias to prevent radiated emissions. Exposed-pad variants require thermal via arrays under the die attach pad.
Do not assume the R5F64166DFD#U0 pinout matches legacy M16C parts - the R32C/100 reorders several peripheral pins, and the suffix encoding differentiates partition variants. Always cross-check the suffix datasheet before PCB layout. Programming via single-wire mode requires the MODE pin strapping; pulling it low at reset enables serial boot, which is easy to misconfigure.
Route CAN_H and CAN_L as a differential pair with 120 Ω characteristic impedance and a common-mode choke near the bus connector. The R32C/100 CAN bit-timing register requires manual configuration; running default timing at non-standard CAN baud rates causes intermittent bus errors. Verify with an oscilloscope on a known-good node.
Информация о соответствии
RoHS non-compliance per GlobalSpec datasheet summary. AEC-Q100 not applicable for industrial -40°C to +85°C grade; choose Renesas automotive-grade R32C variants for AEC-Q100. Other compliance attributes not stated in source data and should be verified with Renesas.
