RC1692HP-SSM - 915MHz Sigfox HP RF Module | Radiocrafts
Артикул: RC1692HP-SSM ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $30.65 | $30,65 |
| 10 | $27.5 | $275,00 |
| 100 | $23.5 | $2.350,00 |
| 500 | $20.2 | $10.100,00 |
| 1.000 | $17.8 | $17.800,00 |
RC1692HP-SSM Обзор
A Sigfox module is a pre-certified RF transceiver that bundles a radio IC, matching network, crystal reference, and protocol stack into a single PCB-mounted assembly, eliminating the need for RF design and FCC/ETSI radio certification by the end user. At the system hierarchy level, Sigfox modules sit within the RF & Wireless > RF Modules family, which in turn feeds into wireless IoT subsystems and the broader Industrial Internet of Things (IIoT) infrastructure. These modules typically support class 0u or class 1u Sigfox device classes and integrate antennas or antenna pin interfaces for rapid prototyping of low-throughput telemetry links.
Key features include an integrated sensor interface for autonomous sensor readout, autonomous Sigfox protocol operation without an external host MCU for the radio layer, and castellated edge pads for SMT reflow soldering directly onto a host PCB. The module includes built-in radio configuration registers accessible via SPI or UART, and offers pre-loaded Sigfox ID and PAC keys for out-of-the-box connectivity. The compact 12.7 x 25.4 mm footprint allows integration into small sensor enclosures common in smart agriculture, asset tracking, and smart-city deployments.
The RC1692HP-SSM uses a high-performance narrowband FSK/OOK transceiver architecture optimized for Sigfox's ultra-narrow-band (UNB) modulation in the 902-928 MHz sub-GHz band. The internal PA delivers +24 dBm conducted output, and the receiver chain achieves -124 dBm sensitivity, enabling multi-kilometer line-of-sight range in typical outdoor deployments. The module's TCXO reference provides tight frequency accuracy needed for Sigfox's regulatory emission masks and interference tolerance under the FCC Part 15.247 / EN 300 220 frameworks.
Typical applications include wireless utility metering (gas, water, electric), environmental monitoring stations, agricultural soil and weather sensors, smart-parking sensors, asset-tracking beacons, and industrial control telemetry. The autonomous sensor interface mode allows battery-powered nodes to wake, measure, transmit, and return to deep sleep without host intervention, simplifying firmware and extending battery life to multi-year operation on primary cells.
When integrating the RC1692HP-SSM, designers should provide an external antenna matched to 50 ohms at 915 MHz, observe clearances around the antenna feed, and follow Radiocrafts' reference layout for the host PCB ground plane treatment under the module. Decoupling capacitors of at least 1 uF must be placed within 5 mm of the VDD pin. RC1692HP-SSM-DK is the matching development kit for accelerated firmware bring-up and Sigfox backend registration.
This page synthesizes distributor pricing tiers, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Prices are referenced as of 2026-10-19 from LCSC, DigiKey India, and YIC distributor listings, providing a consolidated cross-check missing from individual vendor pages.
Аналоги без доработки для RC1692HP-SSM — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
RC1692HP-SSM-DK
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
RC1692HP-SSM-EU
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
RC1692HP-SSM-DK
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
RC1692HP-SSM Характеристики (опубликованы производителем)
| Product Type | RF Transceiver Module |
| Protocol | Sigfox |
| Frequency Band | 902 MHz to 928 MHz (ISM < 1 GHz) |
| Data Rate (Uplink TX) | 600 bps |
| Data Rate (Downlink RX) | 600 bps |
| Output Power | 24 dBm |
| Receiver Sensitivity | -124 dBm |
| Напряжение питания | 2.8 V to 3.6 V |
| Module Dimensions | 12.7 mm x 25.4 mm x 3.7 mm |
| Корпус | Castellation Surface Mount |
| Antenna | Not included (external required) |
| Modulation | FSK / OOK (Ultra-Narrow-Band) |
| Operating Region | North America / FCC 915 MHz ISM band |
| Host Interface | SPI / UART (per datasheet) |
| Sensor Interface | Integrated (autonomous sensor readout) |
| Статус RoHS | Compliant (assumed, not in verified excerpts) |
Интерфейсы и разъемы RC1692HP-SSM
RC1692HP-SSM имеет следующие интерфейсы и разъемы, опубликованные производителем: Входная мощность. Цоколевка разъемов расширения, нумерация контактов разъемов и электрические пределы определены в документации производителя.
| Входная мощность | 2.8 V to 3.6 V |
Обратитесь к документации производителя для полной распиновки разъёма расширения и нумерации контактов соединителя.
Мощностные и тепловые характеристики
| Входная мощность | 2.8 V to 3.6 V |
Параметры входной мощности и тепловые параметры для RC1692HP-SSM, опубликованные производителем.
Типичное применение
RC1692HP-SSM подходит для 6 применениеs: Wireless Utility Metering (Gas/Water/Electric), Environmental Monitoring Stations, Smart Parking Sensors, Asset Tracking Beacons, Industrial Control Telemetry, Smart Agriculture Soil Sensors.
Wireless Utility Metering (Gas/Water/Electric)
The RC1692HP-SSM is purpose-built for wireless utility metering where long-range telemetry from basement or underground pits is required. With -124 dBm sensitivity and 24 dBm TX power, it can penetrate meter pits and concrete enclosures to deliver Sigfox frames from coverage-challenged locations. The 600 bps data rate matches Sigfox's uplink protocol, ideal for sending daily consumption summaries in 6-byte payloads. Battery life estimation at 1 frame/day is 10+ years on a 2500 mAh Li-SOCl2 cell, satisfying utility-grade service intervals. Pair with a reed-switch pulse counter or an I2C meter interface for autonomous operation.
Рекомендуется
Environmental Monitoring Stations
For air-quality, soil-moisture, and weather stations in remote deployments, the RC1692HP-SSM's autonomous sensor interface mode eliminates the need for a host MCU, reducing BOM cost and standby current. The integrated sensor port reads temperature, humidity, and pressure sensors and transmits on a configurable schedule. At 902-928 MHz with FCC certification pre-loaded, environmental sensor networks can be deployed across farms and forests without per-node radio certification. Use a solar-harvested Li-ion cell with the module's low deep-sleep current for off-grid operation.
Рекомендуется
Smart Parking Sensors
Smart-parking sensors mounted in parking-lot asphalt detect vehicle occupancy and report status to a central parking management system via Sigfox. The RC1692HP-SSM's compact 12.7 x 25.4 mm footprint fits inside a puck-shaped in-ground housing, and its 24 dBm TX power delivers reliable uplink from below-grade enclosures. Battery life at 1 transmission per minute approaches 3-5 years on a primary Li-SOCl2 cell. The castellation SMT package is also reflow-solder compatible for high-volume manufacturing.
Рекомендуется
Asset Tracking Beacons
For asset tracking of shipping containers, livestock, and high-value mobile equipment, the RC1692HP-SSM provides low-throughput periodic location pings via Sigfox geolocation services. While the module does not include GPS, paired with Sigfox's network-based geolocation it can deliver sub-kilometer positioning accuracy. The 600 bps data rate is sufficient for transmitting 1-frame-per-hour beacon messages carrying ID, battery voltage, and optional temperature telemetry. Ruggedize the host enclosure for industrial asset-tracking deployments.
Рекомендуется
Industrial Control Telemetry
Industrial plants use the RC1692HP-SSM to wirelessly monitor tank levels, pump status, and valve positions in locations where wired connections are impractical. The 2.8V to 3.6V supply range supports direct battery operation or 3.3V regulated rails from industrial 24V bus converters. The module's SPI/UART host interface enables integration with industrial PLCs and SCADA gateways. FCC pre-certification simplifies deploying nodes across multiple factory sites under a single regulatory envelope.
Рекомендуется
Smart Agriculture Soil Sensors
In precision-agriculture deployments, the RC1692HP-SSM supports soil-moisture, pH, and nutrient-sensor nodes scattered across fields where cabling is impossible. The 24 dBm TX power delivers uplink from within dense crop canopies and across kilometer-scale fields. The autonomous sensor-read mode allows the host MCU to remain in deep sleep between transmissions, extending battery life to multiple growing seasons. Sigfox's uplink-only-at-600-bps nature suits the low-bandwidth telemetry typical of soil-sensor nodes.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для RC1692HP-SSM — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | RC1692HP-SSM-DK | RC1692HP-SSM-EU |
|---|---|---|---|
| Brand | Radiocrafts | Radiocrafts | Radiocrafts |
| Package / Footprint | Castellation SMD 12.7 x 25.4 mm | DK carrier board with same module | Castellation SMD 12.7 x 25.4 mm - same |
| Frequency Band | 902-928 MHz | 902-928 MHz - same | 868 MHz (EU ISM) |
| Output Power | 24 dBm | 24 dBm - same | 24 dBm - same |
| Receiver Sensitivity | -124 dBm | -124 dBm - same | -124 dBm - same |
| Data Rate | 600 bps | 600 bps - same | 600 bps - same |
| Supply Voltage | 2.8V to 3.6V | 2.8V to 3.6V - same | 2.8V to 3.6V - same |
| Target Region | North America (FCC) | North America (FCC) | Europe (CE/ETSI) |
Ключевые отличия
- Integrated autonomous sensor interface eliminates need for external host MCU in simple sensor nodes (против CC1125 bare transceiver IC)
- FCC pre-certification eliminates end-product radio certification cost (против DIY CC1125 + Sigfox stack)
- 24 dBm high-power output extends range to 10+ km line-of-sight vs typical 14 dBm Sigfox modules (против Standard 14 dBm Sigfox modules)
Заметки по проектированию
Place the external 50-ohm antenna trace or U.FL pigtail within 5 mm of the module's antenna pad to minimize feedline loss. Maintain a ground keep-out area beneath the antenna pad and avoid routing digital signals directly under the RF section. Follow Radiocrafts' reference PCB stack-up - the module antenna performance is sensitive to the host PCB ground plane extent and dielectric constant. Estimated impact: a poor PCB layout can degrade link budget by 10-15 dB.
Decouple VDD with a 1 uF ceramic capacitor placed within 5 mm of the module's VDD pin. For battery-powered designs, add a 10 uF bulk capacitor to absorb TX current transients (the 24 dBm TX burst draws >250 mA peak). Use Radiocrafts' low-Iq sleep-mode firmware reference to reduce deep-sleep current to under 1 uA, essential for multi-year battery life.
Do not assume the RC1692HP-SSM includes an antenna - the module requires an external 50-ohm antenna tuned to 902-928 MHz. Antenna return loss worse than -10 dB will degrade both TX EIRP and RX sensitivity significantly. For 868 MHz EU deployments, use the RC1692HP-SSM-EU variant instead - the 915 MHz variant does not meet ETSI EN 300 220 emission masks and is not legal for European operation.
While the RC1692HP-SSM does not dissipate significant continuous heat, sustained 24 dBm TX bursts in high-duty-cycle scenarios may elevate the module's internal PA junction temperature. Provide thermal vias under the castellation GND pads to conduct heat into the host PCB ground pour. For ambient temperatures above 60C in sealed enclosures, derate TX duty cycle or add a small external heatsink over the module body.
Информация о соответствии
RoHS and lead-free assumed compliant per Radiocrafts product page; specific REACH, halogen-free, and conflict-minerals declarations not in verified web excerpts - flagged as unknown.
