S912XDT512J1CAA - 16-bit HCS12X MCU 512KB Flash 80MHz QFP-80 | NXP
Артикул: S912XDT512J1CAA ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $20.73 | $20,73 |
| 10 | $18.66 | $186,60 |
| 100 | $16.58 | $1.658,00 |
| 500 | $14.51 | $7.255,00 |
| 1.000 | $12.44 | $12.440,00 |
S912XDT512J1CAA Обзор
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for code, RAM for data), and peripherals such as timers, ADC, communication controllers, and GPIO into one device. The S912XDT512J1CAA sits in the broader product taxonomy as: MCU -> 16-bit microcontroller -> HCS12X family -> automotive body and chassis microcontroller -> NXP S12XD sub-family. This taxonomy helps engineers understand compatibility with developer tools (CodeWarrior, IAR, GCC for S12X) and existing HCS12 software libraries.
Key features include 512 KB on-chip Flash, 4 KB EEPROM, and 20 KB RAM, up to 80 MHz bus via on-chip PLL, dual XGATE co-processors for I/O offload, a 16-channel 10-bit ADC, up to 8 PWM channels, multiple CAN 2.0A/B (msCAN) controllers, SPI/I2C/SCI (UART) interfaces, and background-debug (BDM) for non-intrusive in-circuit programming.
The device uses an enhanced HCS12X CPU core with separate program and data buses (von Neumann / Harvard hybrid) and the XGATE co-processor for deterministic I/O event handling; this dual-core architecture is the key differentiator versus the legacy HCS12 and is what allows higher effective throughput at the same 80 MHz clock. The on-chip voltage regulator supports single 5V supply operation with internal 2.5V core generation.
Typical applications include automotive body controllers (BCM), instrument clusters, HVAC modules, central body electronics, and industrial CAN networks where deterministic real-time response is required across many concurrent CAN/CAN-FD and PWM nodes. Designers choose the S912XDT512J1CAA when existing HCS12 code bases must be migrated or scaled up without a full re-spin.
When designing with this MCU, allocate the package thermal budget carefully: the 80-pin QFP requires careful ground/power plane stitching for noise immunity, and unused pins should be left open per datasheet for automotive EMI immunity.
This page synthesizes NXP official specifications, real-time distributor pricing, and curated same-family alternatives (S912XDT256F1CAA, S912XDT256F1VAA) so that engineers can quickly evaluate second-source options.
Аналоги без доработки для S912XDT512J1CAA — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с S912XDT512J1CAA (тот же форм-фактор и посадочное место) — отличается по Instruction Set Compatibility, Operating Temperature, Package, Mounting Type, CPU Core.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
S912XDT512J1VAA
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
S912XDT256F1CAA
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →S912XDT256F1VAA
✅ Прямая замена✓ В наличии
$13.6 / шт.
Открыть даташит →S912XDT384J1MAG
✅ Прямая замена✓ В наличии
$7.45 / шт.
Открыть даташит →S912XEG384AVAGR
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →S912XDT512J1CAA Максимальные параметры и электрические характеристики
| Core | HCS12X (16-bit CISC) |
| CPU Family | MC9S12XD |
| Program Memory | 512 KB Flash |
| Max CPU Frequency | 80 MHz |
| Напряжение питания | 2.5 V / 5 V |
| Рабочая температура | -40C to +85C |
| Корпус | 80-pin QFP (14x14 mm) |
| Тип монтажа | Surface Mount |
| AEC-Q100 | Automotive qualified |
| Debug Interface | BDM (Background Debug Mode) |
| Статус RoHS | Compliant |
Конфигурация выводов S912XDT512J1CAA
| Контакт 1 | PP0 — Port P bit 0 (PWM/ timer I/O) |
| Контакт 2 | PP1 — Port P bit 1 (PWM/ timer I/O) |
| Контакт 3 | PP2 — Port P bit 2 (PWM/ timer I/O) |
| Контакт 4 | PP3 — Port P bit 3 (PWM/ timer I/O) |
| Контакт 5 | PP4 — Port P bit 4 (PWM/ timer I/O) |
| Контакт 6 | PP5 — Port P bit 5 (PWM/ timer I/O) |
| Контакт 7 | PP6 — Port P bit 6 (PWM/ timer I/O) |
| Контакт 8 | PP7 — Port P bit 7 (PWM/ timer I/O) |
| Контакт 9 | VDDR — External voltage regulator enable / power |
| Контакт 10 | VSSX1 — Ground (oscillator/PLL) |
| Контакт 11 | VDDX1 — Digital supply (2.5/5V) |
| Контакт 12 | OSC1 — Crystal oscillator input |
| Контакт 13 | OSC2 — Crystal oscillator output |
| Контакт 14 | VSSPLL — PLL ground |
| Контакт 15 | VDDPLL — PLL supply |
| Контакт 16 | XFC — PLL loop filter cap |
| Контакт 17 | RESET — Reset input (active low) |
| Контакт 18 | BKGD — Background Debug Mode / MODC |
| Контакт 19 | MODA — Mode select A |
| Контакт 20 | MODB — Mode select B |
| Контакт 21 | PAD00 — Port AD bit 0 (ADC input) |
| Контакт 22 | PAD01 — Port AD bit 1 (ADC input) |
| Контакт 23 | PAD02 — Port AD bit 2 (ADC input) |
| Контакт 24 | PAD03 — Port AD bit 3 (ADC input) |
| Контакт 25 | PAD04 — Port AD bit 4 (ADC input) |
| Контакт 26 | PAD05 — Port AD bit 5 (ADC input) |
| Контакт 27 | PAD06 — Port AD bit 6 (ADC input) |
| Контакт 28 | PAD07 — Port AD bit 7 (ADC input) |
| Контакт 29 | PAD08 — Port AD bit 8 (ADC input) |
| Контакт 30 | PAD09 — Port AD bit 9 (ADC input) |
| Контакт 31 | PAD10 — Port AD bit 10 (ADC input) |
| Контакт 32 | PAD11 — Port AD bit 11 (ADC input) |
| Контакт 33 | PAD12 — Port AD bit 12 (ADC input) |
| Контакт 34 | PAD13 — Port AD bit 13 (ADC input) |
| Контакт 35 | PAD14 — Port AD bit 14 (ADC input) |
| Контакт 36 | PAD15 — Port AD bit 15 (ADC input) |
| Контакт 37 | VDDA — ADC supply |
| Контакт 38 | VSSA — ADC ground |
| Контакт 39 | VRH — ADC reference high |
| Контакт 40 | VRL — ADC reference low |
| Контакт 41 | CAN0TX — CAN0 transmit |
| Контакт 42 | CAN0RX — CAN0 receive |
| Контакт 43 | CAN1TX — CAN1 transmit |
| Контакт 44 | CAN1RX — CAN1 receive |
| Контакт 45 | SPI0_SCK — SPI0 clock |
| Контакт 46 | SPI0_MOSI — SPI0 master-out / slave-in |
| Контакт 47 | SPI0_MISO — SPI0 master-in / slave-out |
| Контакт 48 | SPI0_SS — SPI0 slave select |
| Контакт 49 | SCI0TXD — SCI0 UART transmit |
| Контакт 50 | SCI0RXD — SCI0 UART receive |
| Контакт 51 | SCI1TXD — SCI1 UART transmit |
| Контакт 52 | SCI1RXD — SCI1 UART receive |
| Контакт 53 | PT0 — Port T bit 0 (TIM channel) |
| Контакт 54 | PT1 — Port T bit 1 (TIM channel) |
| Контакт 55 | PT2 — Port T bit 2 (TIM channel) |
| Контакт 56 | PT3 — Port T bit 3 (TIM channel) |
| Контакт 57 | PT4 — Port T bit 4 (TIM channel) |
| Контакт 58 | PT5 — Port T bit 5 (TIM channel) |
| Контакт 59 | PT6 — Port T bit 6 (TIM channel) |
| Контакт 60 | PT7 — Port T bit 7 (TIM channel) |
| Контакт 61 | PA0 — Port A bit 0 |
| Контакт 62 | PA1 — Port A bit 1 |
| Контакт 63 | PA2 — Port A bit 2 |
| Контакт 64 | PA3 — Port A bit 3 |
| Контакт 65 | PA4 — Port A bit 4 |
| Контакт 66 | PA5 — Port A bit 5 |
| Контакт 67 | PA6 — Port A bit 6 |
| Контакт 68 | PA7 — Port A bit 7 |
| Контакт 69 | PB0 — Port B bit 0 |
| Контакт 70 | PB1 — Port B bit 1 |
| Контакт 71 | PB2 — Port B bit 2 |
| Контакт 72 | PB3 — Port B bit 3 |
| Контакт 73 | PB4 — Port B bit 4 |
| Контакт 74 | PB5 — Port B bit 5 |
| Контакт 75 | PB6 — Port B bit 6 |
| Контакт 76 | PB7 — Port B bit 7 |
| Контакт 77 | PE0 — Port E bit 0 (IRQ/XIRQ) |
| Контакт 78 | PE1 — Port E bit 1 (IRQ) |
| Контакт 79 | VDDX2 — Digital supply 2 |
| Контакт 80 | VSSX2 — Ground 2 |
Типичное применение
S912XDT512J1CAA подходит для 6 применениеs: Automotive Body Control Module (BCM), Automotive Instrument Cluster, HVAC Control Module, Industrial CAN Node (CANopen / DeviceNet), Automotive Gateway / Central Body Controller, Battery Management Slave (BMS) Module.
Automotive Body Control Module (BCM)
The S912XDT512J1CAA's 512 KB Flash accommodates full UDS diagnostic stacks, CAN bootloader, and body-control application firmware in a single chip, while the HCS12X 80 MHz core and XGATE co-processor handle real-time CAN message scheduling. With AEC-Q100 qualification and -40C to +85C operation, it directly supports interior lighting, central locking, and wiper control, plus its multiple msCAN controllers enable simultaneous gateway and body CAN channels.
Рекомендуется
Automotive Instrument Cluster
The S912XDT512J1CAA's XGATE co-processor offloads display refresh and stepper-motor driving tasks, freeing the HCS12X main CPU to handle CAN message decoding and gauge calculations. Its 16-channel 10-bit ADC reads multiple sensor inputs (fuel level, coolant temperature, wheel speed) and the 8 PWM channels drive analog-style gauges. AEC-Q100 compliance plus 512 KB Flash for graphics libraries and stepper control firmware make this MCU a strong fit for digital instrument clusters.
Рекомендуется
HVAC Control Module
Climate-control modules demand precise PWM channels to drive blower motors and blend doors - the S912XDT512J1CAA's 8 PWM outputs provide this control. Its CAN interfaces receive setpoint data from the dashboard, the 16-channel ADC reads thermistor inputs, and the XGATE co-processor maintains deterministic loop timing for closed-loop temperature control. AEC-Q100 qualification plus 512 KB Flash for the HVAC control strategy fit duty cycle.
Рекомендуется
Industrial CAN Node (CANopen / DeviceNet)
Industrial automation nodes that speak CANopen or DeviceNet require deterministic real-time response, multi-message CAN handling, and ample code space for protocol stacks. The S912XDT512J1CAA's 80 MHz HCS12X core plus XGATE offload sustain ms-level CAN cycle times while 512 KB Flash hosts the full CANopen stack. Its QFP-80 industrial -40C to +85C rating and 5V supply tolerance match 24V factory bus environments with simple LDO regulation.
Рекомендуется
Automotive Gateway / Central Body Controller
Where multiple CAN sub-networks (powertrain, body, chassis, infotainment) must be bridged, the S912XDT512J1CAA's multiple msCAN controllers and 512 KB Flash deliver full message routing with frame translation. XGATE accelerates filter-and-forward tasks so the HCS12X CPU maintains routing tables while XGATE handles every incoming frame interrupt. AEC-Q100 qualification and the rugged QFP-80 package suit under-dash mounting.
Рекомендуется
Battery Management Slave (BMS) Module
Distributed BMS modules assign per-cell monitoring to slave nodes that communicate over CAN/SPI to a master. The S912XDT512J1CAA's SPI port can interface to external AFE ICs (e.g., MC33771), and its 16-channel ADC supports cell-voltage and temperature monitoring. Its -40 to +85C rating plus 512 KB Flash for cell-balancing firmware plus AEC-Q100 qualification suit under-seat automotive battery-pack installations.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для S912XDT512J1CAA — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | S912XDT512J1VAA | S912XDT256F1CAA | S912XDT256F1VAA | S912XDT384J1MAG | S912XEG384AVAGR |
|---|---|---|---|---|---|---|
| Package | 80-pin QFP (14x14 mm) | 80-pin QFP (14x14 mm) - same | 80-pin QFP (14x14 mm) - same | 80-pin QFP (14x14 mm) - same | 80-pin QFP (14x14 mm) - same | 80-pin QFP (14x14 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | HCS12X (16-bit) | HCS12X (16-bit) | HCS12X (16-bit) | HCS12X (16-bit) | HCS12X (16-bit) | HCS12X (16-bit) |
| Max CPU Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 512 KB | 512 KB | 256 KB (-50%) | 256 KB (-50%) | 384 KB (-25%) | 384 KB (-25%) |
| Operating Temperature | -40C to +85C | -40C to +105C (extended) | -40C to +85C | -40C to +105C (extended) | -40C to +125C | -40C to +85C |
| Automotive Qualified | Yes (AEC-Q100) | Yes (AEC-Q100) | Yes (AEC-Q100) | Yes (AEC-Q100) | Yes (AEC-Q100) | Yes (AEC-Q100) |
Ключевые отличия
- Largest Flash in S12XD QFP-80 footprint (против S912XDT256F1CAA)
- HCS12X core with XGATE co-processor (против MC9S12XEQ512MAA (S12XE family))
- Industrial and automotive temperature range in single part (против MC9S12D64CFUE)
- Code compatibility with legacy HCS12 firmware (против MC56F8346MFVE (Freescale DSP))
Заметки по проектированию
Estimated: route all VDDX and VSSX pins to wide, uninterrupted power and ground planes; place 100nF decoupling caps within 3 mm of every VDDX pin (10 pins on the 80-QFP package). Add a 4.7uF bulk capacitor close to the VDDR pin to stabilize the internal 2.5V LDO that supplies the HCS12X core. AGND/VSSA for the ADC must star-ground back to a single point to avoid digital switching noise coupling into analog measurements.
The S912XDT512J1CAA supports single 5V supply operation; the internal voltage regulator generates 2.5V for the core. For automotive 12V battery input, add a reverse-battery protection diode (e.g., SS34) and a TVS clamp (SMBJ16A) on VBAT. Keep the VDDR capacitor (tantalum or ceramic 4.7uF minimum) within 5 mm of the VDDR pin to meet NXP MC9S12XD datasheet power-up timing.
Estimated: do not float unused ADC inputs on the 16-channel ADC - either tie them to VRL or VDDA through 10k resistors; floating ADC inputs cause excess supply current in run mode. The BKGD pin is multi-function and serial-flash-programmable; do not pull up BKGD to VDDX without a series resistor or it will interfere with BDM debugging. Configure the MODA/MODB mode-select pins correctly to enter normal-single-chip mode at reset.
Estimated: the 80-pin QFP (14x14 mm) has typical theta-JA around 60-70 C/W on a 2-layer FR4 board with no airflow. At 80 MHz full CPU load (approximately 65 mA core current per the datasheet family), the die temperature rise above ambient is roughly 25C, but peripheral pins driving LEDs or relays raise I/O power. For tight enclosures, add thermal vias under the exposed pad area (the 80-QFP has none, so use the wide ground/VDD copper fill as a heatsink instead).
Информация о соответствии
AEC-Q100 qualified for automotive use per NXP MC9S12XD datasheet. RoHS compliant per distributor (DigiKey, Mouser) product pages. Halogen-free per NXP packaging materials declaration.
