SI2165-D-GM - DVB-T/C Demodulator IC | Skyworks Solutions
Артикул: SI2165-D-GM ✓ АктивенSI2165-D-GM Обзор
A digital television demodulator is an interface IC that recovers MPEG transport-stream data from a tuner analog output. In the television signal chain, an RF tuner first selects a channel and produces an intermediate-frequency signal; the demodulator then performs symbol recovery and channel decoding. The Si2165 occupies the baseband stage between a compatible TV tuner and a host processor, simplifying terrestrial and cable receiver designs.
The Si2165 supports DVB-T, DVB-T/C, and DVB-H-oriented reception identified by Skyworks for its product family. Its analog front end contains two 12-bit ADCs with wide dynamic range, allowing direct connection to standard-IF, low-IF, or zero-IF tuners. This flexibility lets designers reuse the demodulator across metal-can tuner packages, tuner modules, and conventional RF front-end arrangements.
The device was designed to complement the Si2170, Si2171, and Si2172 hybrid tuner families. Because its input architecture supports both approximately 36 MHz standard IF and low-IF or zero-IF signals, system partitioning can change without changing the downstream demodulator. The I2C and serial control paths provide host access to status, tuning-related information, and transport-stream configuration functions.
Typical uses include free-to-air and pay-TV set-top boxes, integrated digital television receivers, PC-TV cards, portable media products, DVD and HDD personal video recorders, and cable or terrestrial television equipment. The compact exposed-pad package supports compact receiver hardware while its dual ADC architecture accommodates multiple tuner output styles.
PCB implementation should prioritize short, controlled routing between the tuner and analog inputs, solid grounding under the exposed pad, and clean separation between sensitive RF-related traces and digital host-interface signals. Follow the manufacturer datasheet for the exact pin assignments, recommended decoupling network, clock requirements, signal-integrity limits, and exposed-pad land pattern rather than inferring connections from the general application description.
This product page combines the Si2165 functional description with package, interface, compliance, and replacement information, plus practical guidance for evaluating the device in terrestrial television, cable, set-top box, and tuner-interface designs. It also distinguishes true pin-compatible options from related devices that cannot be installed on the same PCB footprint without redesign.
Аналоги без доработки для SI2165-D-GM — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
SI2161-D-GM
✅ Прямая заменаУточнить цену
Открыть даташит →SI2165-D-GM Характеристики
| Product Type | Standalone DVB-T/C digital television demodulator IC |
| Supported Standards | DVB-T and DVB-C |
| ADC Resolution | 12 bit |
| Number of ADCs | 2 |
| Supported Input Modes | Standard IF near 36 MHz, low-IF, or zero-IF |
| Host Interface | I2C or serial |
| Корпус | 36-pin QFN exposed-pad package, 5 mm x 6 mm |
| Package Type | VFQFN-36 exposed pad |
| Тип монтажа | Surface mount |
| Packaging | Tray |
| Lead-Free Status | Lead free |
| Статус RoHS | RoHS compliant |
| Compatible Tuner Families | Si2170, Si2171, and Si2172 hybrid tuner product families |
Руководство по цоколевке SI2165-D-GM в корпусе vfqfn-36 exposed pad
Цоколевка для SI2165-D-GM (корпус vfqfn-36 exposed pad). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для SI2165-D-GM.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
SI2165-D-GM подходит для 6 применениеs: Free-to-Air Digital Television Receivers, Pay-TV and Cable Set-Top Boxes, PC-TV and USB Television Adapters, Integrated Digital Television Platforms, DVD and HDD Personal Video Recorders, Portable Media and Portable Television Products.
Free-to-Air Digital Television Receivers
The SI2165-D-GM fits free-to-air receiver designs that need a dedicated demodulator behind a compatible television tuner. Its dual 12-bit ADC front end accepts approximately 36 MHz standard IF, low-IF, or zero-IF outputs, giving the designer flexibility in tuner selection without changing the downstream baseband architecture. DVB-T operation supports terrestrial broadcast reception, while DVB-C coverage permits the same platform to target cable service requirements. The I2C or serial host interface provides a path for status reporting and receiver configuration. Keep the analog route between tuner and ADC inputs short, follow the manufacturer grounding and exposed-pad requirements, and validate signal amplitude and bandwidth against the applicable tuner output characteristics.
Рекомендуется
Pay-TV and Cable Set-Top Boxes
The SI2165-D-GM is suitable for cable and pay-TV set-top box platforms requiring DVB-C demodulation in addition to terrestrial DVB-T reception. Its dual 12-bit ADCs can accept standard-IF, low-IF, or zero-IF outputs from a compatible tuner, allowing one demodulator design to span several tuner implementations. The compact 36-pin QFN exposed-pad package preserves board area in cost-sensitive consumer receivers. System designers should evaluate channel bandwidth, symbol rate, transport-stream output requirements, host-control protocol, and tuner compatibility before release. Pay-TV systems also require secure conditional-access architecture outside this demodulator, so the Si2165 addresses signal recovery rather than subscription authorization.
Рекомендуется
PC-TV and USB Television Adapters
The SI2165-D-GM can serve as the digital demodulation stage in compact PC-TV or USB television receiver hardware. A compatible tuner converts the selected RF channel into an analog intermediate-frequency signal, and the Si2165 recovers the digital transport stream through its two 12-bit ADC channels. Support for standard IF near 36 MHz, low-IF, and zero-IF makes the demodulator adaptable to different tuner modules. The I2C or serial control interface can connect to a host processor over a short printed-circuit-board path. In these systems, use controlled impedance where required, maintain a solid ground reference for the exposed pad, and avoid routing high-energy switching or digital memory signals near the analog ADC inputs to minimize tuner-to-demodulator coupling.
Рекомендуется
Integrated Digital Television Platforms
The SI2165-D-GM supports modular digital television platforms in which the tuner and demodulator are designed as separate stages. This partitioning allows an OEM to change tuner vendors or RF front-end implementations while retaining the baseband demodulation device. The Si2165's ability to process approximately 36 MHz standard IF as well as low-IF and zero-IF inputs improves platform reuse, while the 36-pin QFN package limits occupied board area. The two 12-bit ADCs support tuner-output flexibility but also demand careful attention to analog grounding and layout. Host software must configure the supported transport-stream and operating modes correctly, and production validation should include worst-case tuner output levels, clock tolerance, channel plans, and temperature-dependent performance.
Рекомендуется
DVD and HDD Personal Video Recorders
The SI2165-D-GM fits personal video recorders that receive digital television channels and store transport streams for later playback. DVB-T and DVB-C capability allows the same receiver platform to support terrestrial or cable feeds, while the interface to a tuner can use standard-IF, low-IF, or zero-IF signaling. The compact QFN package is useful in media appliances with limited PCB area, although the exposed pad still requires a properly engineered thermal path. Validate sustained transport-stream throughput, host buffer behavior, error resilience, and recovery from signal loss in the complete storage pipeline. Layout should isolate the sensitive analog input section from processor, memory, and disk-drive power paths while keeping the I2C or serial host interface away from the ADC inputs.
Рекомендуется
Portable Media and Portable Television Products
The SI2165-D-GM is appropriate for portable media and portable television designs that receive DVB-T or DVB-C broadcasts through a compatible tuner. The demodulator supports standard IF near 36 MHz, low-IF, and zero-IF inputs, enabling the tuner subsystem to be selected according to antenna and power constraints. Its dual 12-bit ADC front end handles the analog tuner output while the host processor manages the recovered transport stream. For battery-powered equipment, overall receiver power depends on the tuner, demodulator operating mode, display, storage, and host processor, so the Si2165 should be assessed within the complete power budget. Preserve thermal performance with a sound exposed-pad land pattern and verify reception sensitivity across temperature, battery condition, and antenna environments.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для SI2165-D-GM — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | SI2161-D-GM |
|---|---|---|
| Brand | Skyworks Solutions Inc. | Silicon Labs |
| Package | 36-pin QFN exposed-pad package, 5 mm x 6 mm | 36-pin QFN, 5 mm x 6 mm |
| Product Type | Standalone digital television demodulator IC | Standalone DVB-T demodulator IC |
| Broadcast Standards | DVB-T and DVB-C | DVB-T |
| Mounting Type | Surface mount | Surface mount |
Ключевые отличия
- Broader broadcast-standard coverage than the same-family SI2161-D-GM (против SI2161-D-GM)
- Broad tuner-output compatibility (против SI2161-D-GM)
- Designed to complement three hybrid tuner families (против SI2161-D-GM)
Заметки по проектированию
Use the manufacturer land pattern for the 36-pin QFN exposed-pad package, including the exposed-pad dimensions, solder-mask definition, and thermal-via arrangement. Place the device so its ground and analog return paths connect to a low-impedance plane without split-plane crossings. Because the package uses a 5 mm by 6 mm footprint, pin density is high; follow the recommended pad-entry geometry for assembly and inspect exposed-pad solder fill after reflow.
Route tuner-to-demodulator analog inputs as short, continuous traces on a stable reference plane. Keep the dual ADC inputs away from switching-regulator inductors, high-current return paths, clock edges, and memory-bus routing. Use the datasheet-defined impedance, grounding, and filtering arrangements rather than adding undocumented analog networks. Validate attenuation, crosstalk, and channel performance with the intended tuner because a clean demodulator cannot recover information already corrupted before the ADC input.
Follow the Si2165 datasheet for supply voltage, decoupling capacitance, sequencing, and exposed-pad connection. Place each required capacitor directly at its designated power pin and maintain a low-impedance return to the device ground. Verify ripple and transient behavior at the ADC supply because the dual 12-bit converters recover low-level digital-TV information from the tuner output. Do not infer allowable supply limits or capacitor values from a generic tuner design.
Do not select the SI2161-D-GM as a functional equivalent when the receiver requires DVB-C. Matching the 36-pin QFN package alone does not guarantee equivalent standards, clocking, register behavior, transport-stream configuration, or analog performance. Before using SI2161-D-GM in a DVB-T-only revision, compare the complete datasheets, verify every pin, test worst-case reception, and obtain written confirmation for production use.
Информация о соответствии
RoHS-compliant and lead-free status are identified for SI2165-D-GM. REACH, AEC-Q100, halogen-free, and conflict-minerals status require separate manufacturer documentation.