STM32F373C8T6 - 72MHz Cortex-M4 64KB MCU | STMicroelectronics
Артикул: STM32F373C8T6 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
STM32F373C8T6 Обзор
What is a Cortex-M4 microcontroller? A Cortex-M4 MCU is a reduced-instruction-set microcontroller core designed for efficient real-time embedded processing. STMicroelectronics places this core inside the broader STM32F3 microcontroller family, combining embedded Flash and SRAM with timers, serial interfaces, analog peripherals, and communication peripherals. The STM32F373C8T6 is therefore a microcontroller rather than a discrete processor or analog component.
The verified product listing identifies a 72 MHz maximum operating frequency and 64 KB Flash organized as 64K x 8. The device also carries an FPU designation in distributor and comparison results, supporting efficient floating-point and digital signal-processing workloads. Its 48-LQFP package provides a conventional leaded surface-mount footprint that can be inspected and assembled with standard SMT production processes. The part is identified as a 32-bit MCU with ARM Cortex-M4 processing.
Typical embedded uses include sensor acquisition and signal conditioning, motor and motion control, industrial monitoring, communication modules, and compact control systems. The 72 MHz core provides useful computational headroom for protocol handling and real-time control, while 64 KB Flash constrains firmware size and should be checked against application requirements. The STM32F373C8T6 is appropriate when engineers need a Cortex-M4-class controller in a 48-LQFP package.
When selecting or replacing this MCU, verify package pin compatibility, Flash capacity, SRAM, peripheral mapping, clock requirements, and firmware support rather than relying on the STM32F3 name alone. The available verified data does not provide a complete pinout, pricing table, or all electrical timing parameters, so those items must be obtained from the official STMicroelectronics documentation before design release.
Аналоги без доработки для STM32F373C8T6 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
STM32F372C8T6
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
STM32F373C8T6 Максимальные параметры и электрические характеристики
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Maximum Operating Frequency | 72 MHz |
| Flash Memory | 64 KB (64K x 8) |
| Core Architecture | ARM Cortex-M4 |
| Floating Point Unit | FPU |
| Корпус | 48-LQFP (7x7 mm) |
| Тип монтажа | Surface Mount |
| Instruction Width | 32-bit |
| Series | STM32F3 |
| Device Family | STM32F373xx |
| Microcontroller Category | Microcontroller IC |
| Application Domain | Embedded control and real-time signal processing |
Руководство по цоколевке STM32F373C8T6 в корпусе 48-lqfp (7x7 mm)
Цоколевка для STM32F373C8T6 (корпус 48-lqfp (7x7 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для STM32F373C8T6.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
STM32F373C8T6 подходит для 6 применениеs: Industrial Sensor Acquisition, Motor and Motion Control, Communication Equipment, Digital Signal Processing, Consumer Accessory Controller, Instrumentation and Measurement.
Industrial Sensor Acquisition
The STM32F373C8T6 fits compact sensor-acquisition and monitoring designs because its Cortex-M4 core operates up to 72 MHz and includes 64 KB of Flash for acquisition logic and control firmware. The available verified data does not specify ADC resolution, channel count, sampling rate, SRAM, or analog supply limits, so those requirements must be checked in the official STMicroelectronics documentation before selecting analog front-end components.
Рекомендуется
Motor and Motion Control
A 72 MHz ARM Cortex-M4 MCU provides a useful real-time control base for small motor, position, or actuator systems. The STM32F373C8T6's verified FPU designation can help with floating-point control calculations, while 64 KB Flash constrains the application to appropriately sized firmware. Timer channels, PWM outputs, encoder interfaces, current sensing, and pin assignments are not available in the verified snippets and must be confirmed before design.
Рекомендуется
Communication Equipment
STM32F373C8T6 is suitable for small protocol-handling and embedded communication modules where a 32-bit Cortex-M4 processor is useful for framing, buffering, and control. The supplied product data confirms 72 MHz operation, 64 KB Flash, and a 48-LQFP package, but it does not confirm UART, SPI, I2C, USB, or CAN details. Interface selection therefore requires the official datasheet and firmware-driver support review.
Рекомендуется
Digital Signal Processing
The Cortex-M4 architecture and FPU designation make STM32F373C8T6 a reasonable candidate for compact embedded DSP functions such as filtering, control transforms, and signal analysis. Its 72 MHz clock provides processing headroom, but the verified 64 KB Flash capacity must be weighed against algorithm tables, buffers, and application firmware. SRAM availability is not supplied, so algorithm and buffer sizing must remain provisional until the official memory specification is confirmed.
Рекомендуется
Consumer Accessory Controller
The STM32F373C8T6 can serve as the central controller in a compact consumer accessory when the design needs a 32-bit Cortex-M4 core, moderate Flash, and a conventional 48-LQFP footprint. It is important to verify low-power modes, available SRAM, I/O voltage, peripheral coverage, and package pin assignments because those details are not present in the verified search snippets. Consumer designs should also validate ESD, environmental, and lifecycle requirements independently.
Рекомендуется
Instrumentation and Measurement
For instrumentation, the STM32F373C8T6's 72 MHz Cortex-M4 processing can support control logic, measurement sequencing, and digital filtering around external analog front ends. The 48-LQFP 7x7 mm package is mechanically practical for many compact instruments, but the verified data does not identify converter specifications, comparator resources, timing peripherals, or analog supply range. Those parameters determine whether the device is suitable for precision measurement and must be checked before layout release.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для STM32F373C8T6 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | STM32F372C8T6 |
|---|---|---|
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm), verified by comparison result |
| Brand | STMicroelectronics | STMicroelectronics |
| Core | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum Frequency | 72 MHz | 72 MHz |
| Flash Memory | 64 KB (64K x 8) | 64 KB, per comparison result |
| FPU | FPU designation listed | FPU designation listed |
| Instruction Width | 32-bit | 32-bit |
| Drop-in Status | Target device | Conditional candidate; complete pin and peripheral verification required |
Ключевые отличия
- 72 MHz Cortex-M4 processing with FPU designation (против STM32F372C8T6)
- 64 KB Flash memory (против STM32F372C8T6)
- 48-LQFP 7x7 mm package (против STM32F372C8T6)
Заметки по проектированию
The verified data does not provide the STM32F373C8T6 operating-voltage range or current consumption. Before schematic capture, check the official datasheet for supply limits, internal regulator behavior, power-on reset requirements, decoupling recommendations, and I/O voltage domains. Do not infer analog or digital voltage compatibility from the 72 MHz clock specification.
The part is specified as a 48-LQFP 7x7 mm package. Confirm the official land pattern, pin-1 orientation, pad dimensions, soldering profile, and exposed thermal or ground requirements before releasing the PCB footprint. A mechanically similar package is not sufficient evidence of pin compatibility; use the STMicroelectronics package drawing as the controlling mechanical document.
The verified 64 KB Flash figure should be treated as a hard design input. Include bootloader space, vector table growth, calibration data, diagnostics, and update logic in the memory budget. Because SRAM and peripheral specifications are absent from the supplied snippets, firmware allocation and real-time task sizing should remain provisional until the official STM32F373 documentation is reviewed.
Информация о соответствии
The supplied verified data does not include explicit compliance statements for STM32F373C8T6. Compliance must be confirmed from the current STMicroelectronics product documentation or supplier declarations.
