STM32F469ZGT6 - 180MHz 1MB Flash MCU | STMicroelectronics
Артикул: STM32F469ZGT6 ✓ АктивенSTM32F469ZGT6 Обзор
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one device. The STM32F469 belongs to the Cortex-M4 microcontroller class and the STM32F4 product family. Its position in the hierarchy is microcontroller → 32-bit microcontroller → Arm Cortex-M4 microcontroller → STM32F4 microcontroller → STM32F469 high-performance series.
Principal features include an Arm Cortex-M4 processor operating at up to 180 MHz, 1 MB of Flash program memory, a hardware floating-point unit, and a 144-LQFP surface-mount package. The STM32F469xx family also supports USB high-speed and full-speed operation, Ethernet, flexible memory controllers, dual Quad-SPI interfaces, a graphical accelerator, camera interfaces, LCD-TFT control, and MIPI DSI. These integrated resources reduce the need for external interface controllers in connected embedded systems.
The device combines a 32-bit RISC architecture with DSP and FPU instructions, making it suitable for workloads that require both control processing and mathematical acceleration. Its external memory connectivity can expand system capability beyond the internal program-memory capacity, while the parallel and serial interfaces allow memory, displays, sensors, and network controllers to be connected around the MCU.
Typical applications include industrial control equipment, connected industrial gateways, high-resolution display controllers, camera-based imaging systems, network-connected embedded products, audio processing, and sophisticated human-machine-interface platforms. The large 144-pin package exposes more I/O and communications resources than smaller LQFP variants, making this ordering especially useful when a design requires extensive external connectivity.
PCB design should preserve the pin arrangement and power requirements defined in the STM32F469xx datasheet and reference manual. Place decoupling capacitors close to the supply pins, route sensitive communications according to the device recommendations, and confirm external-memory topology and signal-integrity requirements before layout release. The 20 mm by 20 mm LQFP footprint also requires adequate solder-joint formation and assembly-plan verification.
This product record combines the manufacturer specification, package identification, interface capabilities, replacement analysis, and practical PCB guidance. It also distinguishes a true pin-compatible replacement from alternatives that merely use a similar STM32 family or offer a different pin count.
Аналоги без доработки для STM32F469ZGT6 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с STM32F469ZGT6 (тот же форм-фактор и посадочное место) — отличается по Core, Package, Supply Voltage.
Для этого товара нет аналогов без доработки.
Запросить аналогиSTM32F469ZGT6 Максимальные параметры и электрические характеристики
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Manufacturer | STMicroelectronics |
| Maximum CPU Frequency | 180 MHz |
| Core | Arm Cortex-M4 |
| Instruction Set | 32-bit RISC with DSP and FPU |
| Internal Flash Memory | 1 MB (1M x 8) |
| Maximum Performance | 225 DMIPS |
| Корпус | 144-LQFP (20 mm x 20 mm) |
| Число выводов | 144 pins |
| Тип монтажа | Surface mount |
| Напряжение питания | 2.5 V / 3.3 V |
| USB Support | USB OTG HS and FS |
| Ethernet Support | Supported |
| External Memory Interfaces | FMC |
| Serial Memory Interfaces | Dual Quad-SPI |
| Graphical Accelerator | Supported |
| Camera Interface | Supported |
| Display Interfaces | LCD-TFT and MIPI DSI |
Руководство по цоколевке STM32F469ZGT6 в корпусе 144-lqfp (20 mm x 20 mm)
Цоколевка для STM32F469ZGT6 (корпус 144-lqfp (20 mm x 20 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для STM32F469ZGT6.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
STM32F469ZGT6 подходит для 6 применениеs: Industrial Control Equipment, Networked Industrial Gateway, Camera-Based Imaging System, High-Resolution Display Controller, USB Audio and Data Acquisition, Secure Embedded IoT Controller.
Industrial Control Equipment
The STM32F469ZGT6 fits industrial controllers that combine deterministic control processing with substantial peripheral connectivity. Its Arm Cortex-M4 core operates at up to 180 MHz and includes DSP and floating-point instructions for motion, signal-processing, and supervisory functions. The 144-LQFP package provides 144 pins for external I/O, communications, and storage connections, while Ethernet and USB OTG support networked service and maintenance interfaces. Designers should assign the pins and peripheral multiplexing from the manufacturer datasheet, and should verify the device’s operating-temperature grade against the machine’s environmental requirements.
Рекомендуется
Networked Industrial Gateway
The STM32F469ZGT6 is appropriate for an industrial gateway requiring Ethernet connectivity alongside local real-time control. Its 180 MHz Cortex-M4 core can manage protocol processing, data acquisition, and application tasks, while the 1 MB Flash configuration provides space for a substantial embedded program. USB OTG HS and FS interfaces support service connections and peripheral expansion. A gateway design should validate Ethernet PHY support, pin multiplexing, external memory requirements, and board-level isolation before finalizing the schematic, since controller capability alone does not specify the complete interface implementation.
Рекомендуется
Camera-Based Imaging System
The STM32F469ZGT6 suits camera-enabled products that need image-pipeline control, a display interface, and high-performance embedded processing. The family includes camera-interface support, a graphical accelerator, LCD-TFT control, MIPI DSI, and external-memory connectivity through FMC. These resources allow an application processor to coordinate sensor data, local framebuffer storage, and display output while the Cortex-M4 core handles control tasks and DSP operations. Sensor timing, voltage levels, bandwidth, and pin assignments must be checked against the manufacturer interface requirements before PCB implementation.
Рекомендуется
High-Resolution Display Controller
The STM32F469ZGT6 can control LCD-TFT or MIPI DSI displays while maintaining separate application-processing tasks on its 180 MHz Cortex-M4 core. Its graphical accelerator, FMC interface, camera support, and dual Quad-SPI peripherals make it suitable for human-machine interfaces that combine graphics, touch-oriented control, and external memory. The 144-pin package helps expose the required display, storage, and communications signals. System designers should use the manufacturer pin table to resolve alternate functions and should validate display timing, memory bandwidth, and panel-specific initialization in the final hardware.
Рекомендуется
USB Audio and Data Acquisition
The STM32F469ZGT6 is well matched to connected audio and data-acquisition products because its Cortex-M4 core provides DSP and FPU instruction support at up to 180 MHz. USB OTG HS and FS can provide a direct host or device path, while the large LQFP package exposes enough pins for storage, codecs, control signals, and communication peripherals. Audio-clock architecture, codec interface timing, USB implementation details, and analog front-end requirements should be validated independently. This configuration favors software-controlled signal processing over systems requiring only a basic control MCU.
Рекомендуется
Secure Embedded IoT Controller
The STM32F469ZGT6 supports connected embedded products that must combine network communication, local control, and substantial firmware capability. Ethernet, USB, and dual Quad-SPI provide multiple avenues for connectivity and storage, while 1 MB of embedded Flash supports a larger application than many basic Cortex-M devices. The 144-LQFP package is appropriate when a product needs numerous external signals instead of a minimal footprint. Deployment planning should include secure boot and key-management requirements, peripheral pin assignments, firmware-update strategy, and product-specific security certification rather than assuming a general-purpose MCU satisfies every IoT security requirement.
Рекомендуется
Справочные инженерные данные для STM32F469ZGT6 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | 144-LQFP (20 mm x 20 mm) |
| Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 180 MHz |
| Internal Flash Memory | 1 MB (1M x 8) |
| Performance | Up to 225 DMIPS |
| Connectivity | USB OTG HS/FS, Ethernet, FMC, dual Quad-SPI, camera IF, LCD-TFT and MIPI DSI |
| Supply Voltage | 2.5 V / 3.3 V |
Ключевые отличия
- High processing throughput in a 144-pin LQFP (против Smaller-package STM32F4 microcontrollers)
- Integrated high-speed and network-oriented interfaces (против Basic control-oriented Cortex-M microcontrollers)
- Display and imaging integration (против General-purpose microcontrollers without the STM32F469 interface set)
Заметки по проектированию
Use the STM32F469xx package drawing and pin table as the controlling references for the 144-LQFP footprint. Confirm land pattern, exposed power and ground pins, programming-access pins, and every alternate-function assignment before release. The 20 mm by 20 mm package requires careful thermal-via and copper-planning decisions because leaded LQFP thermal performance is not equivalent to a leadless package.
Plan the power tree around both 2.5 V and 3.3 V supply domains identified for the device, while checking which rails must be present during boot, programming, and normal operation. Place the required bypass capacitors close to their associated supply pins and follow the manufacturer’s recommended values and layout. Verify sequencing, voltage tolerances, and power-source ramp behavior in the final schematic rather than deriving limits from generic 3.3 V logic assumptions.
High-speed USB, Ethernet, Quad-SPI, camera, display, and FMC signals require topology-specific routing rules. Preserve the manufacturer’s interface recommendations for controlled-impedance routing, reference planes, via transitions, and connector or transceiver placement. For external memory, validate address, data, and control timing across the intended operating frequency; high CPU performance does not guarantee that an external memory implementation can operate at the bus maximum.
Do not treat a device with the same STM32 family name as a drop-in substitute without comparing the complete pin table and peripheral implementation. A valid redesign review must cover package pins, supply domains, clocks, boot configuration, USB and Ethernet PHYs, memory interfaces, camera and display resources, firmware startup, peripheral errata, and development-tool support. This prevents a nominal family match from becoming a board-level incompatibility.
Информация о соответствии
The product is an industrial and commercial microcontroller rather than an automotive-qualified ordering variant. Specific environmental and material-compliance claims should be confirmed against the manufacturer documentation for the selected ordering code.